Related
Hi all,
I am posting a thread after 3 hours of checking the internet to see if others report the same bug.
I am currently using a Kaiser with WM6. Just to describe my problem, when i enter the SMS application (mailbox) and i click on an SMS to read it, the bottom of the page is displayed first (usually blank screen), so everytime i need to use the scroll bar to see the message content which is on the top of the page.
I know it is not a major issue but it's still really annoying. As i said i have been looking everywhere but so far with no chance. This might be a registry problem, maybe caused by the installation of a program, but i don't have anything fancy on my mobile so far.
Anyway, thanks in advance for your help.
Bye
hey..just today i had the same problems...
i guess it has something to do with htc tweaker unintalled and installed it again last night and since then the problems occured
it is not a major flaw though..but annoying...
please help
zorlak said:
Hi all,
I am posting a thread after 3 hours of checking the internet to see if others report the same bug.
I am currently using a Kaiser with WM6. Just to describe my problem, when i enter the SMS application (mailbox) and i click on an SMS to read it, the bottom of the page is displayed first (usually blank screen), so everytime i need to use the scroll bar to see the message content which is on the top of the page.
I know it is not a major issue but it's still really annoying. As i said i have been looking everywhere but so far with no chance. This might be a registry problem, maybe caused by the installation of a program, but i don't have anything fancy on my mobile so far.
Anyway, thanks in advance for your help.
Bye
Click to expand...
Click to collapse
It's because you've enables smooth scrolling in PIE using one of the tweak programs.
In Tweaks2k2 you can disable this option and this will correct the issue.
Hi,
I am new on this portal but I read a lot in the last days and was very surprised of the solutions you find and also the apps you made working. Great
I know its not looking very good to ask as newbie for help but I hope you can help me... I am searching for more than a week for a solution and tried even to edit the registry but unfortunately I am not good enough to find the solution
So what do I want do to?
I have a HD2 (branding free) and I want to install Avaya One-X mobile.
Well the installation was succesfull and I also get it running inside my company and also the private modus. But since I have it installed I hear no ringtone. It always plays an "ding" and thats all.
So right now I always have to keep my eyes on my mobile to see if someone calls me or not.
And the second problem is that I also get no caller picture displayed..
But as soon as I deinstall the one-x everything is working (phone rings and caller picture is displayed)????
So you are my last hope to find a solution. Please can you help me?
If you need any further infos please let me know
Thanks
Frank
oh... the one-x mobile software is free for download on the avaya webiste
I can post you the link later (I am not allowed to post it right now...)
i'm getting mad with it...
Now I am a step further.. I now that the software deactivates the onboard call handler. I think it is only a registry setting to reenable it. after done the caller name+picture should be displayed and even the call-slider should be back.
Does someone have an idea where I can find the entry?
well now I know exactly the differents between the registry with one-x installed vs without. But I have no experiences in reading/interpreting my results.
Is a Dword something which can be used as name? or is it only a value?
Does someone has a guide for beginners please?
Did you contact Avaya support for assistance?
I have recently taken over all our telecoms at the office (avaya system)
Saw your post on One-x and been reading a little on it. Where did you get the install files from and did you get it working in the end?
I have a support contact with a company called central so I can contact them for free advice if needed
is this the version you are using?
http://support.avaya.com/css/appman...loads/P0438/5.2.x/C201012083328498084#summary
I'll take a look at what the installer does as I've not heard of it before but it's not letting me register to download it .
yep that's the software I am trying to download
Could not create an account either
I have emailed my support company and they will be sending the software to me on a disc.
thanks for your responses.
I installed the version for pocketpc WM6 (not the UC version) and yes it is working fine
But:
The problem I have is that since I have it installed it
- my mobile does not play a ringtone any more
- "slide to answer" and "show caller name+picture" is away
When I get the disc tomorrow ill post up the results.
This app will be very helpful if i get it working
As for the no ringtone issue I am not sure.
I would attach it... but i have no permissions...
@ fards: there are two versions. one for "Windows mobile 5"and the other one for "Windows mobile pocket pc" (here you can find it for WM6). the first is a UC versions. For this you need an internet connection and a uc-server running in your company. the other one is for normal mobile use. it calls via the phone connection the server and then your call is managed by the server.
support.avaya.com/css/appmanager/public/support/Downloads/P0483/C20090710162819340875658#files
you can find it here for free and you need no login
I do not see the HD2 listed as compatible device.
Did you get it working or still having problems?
How does the Avaya interface on the mobile phone look like?
Is it replacing the WM dialer completly or only while Avaya software is running in the background?
I have just installed it onto my HD2. The install hung at the end for about 20 mins. Reset device and the software has replaced my dialer. Appears to be working but im reading on how to configure the ini file now.
Tested on personal mode and call connected fine.
it replaces the dialer completly...
for the ini file you need the settings of your ACM. here you have to enter different extensions for each function...
you also has to to enter your mobile number in the ACM. Because your are identified via your number.
But can you test if you get a ringtone for incoming calls? thats my problem. I get no
Just to draw a conclusion to this This topic. This solution does not work correctly on HD2. Unless someone has managed to do this and has not shared?
sry... I was offline for a while... Does somesone find the solution?
No i gave up in the end..... bloody crap
Hi Guys,
Just wanted everyone to know there is a free app called:
http://www.tellme.com/you
Its like Microsoft Voice Command.....maybe it is....maybe its whats included in the new WP7S, however its an app that works on 6.5 and its great, fast and I actually like it.
Take a look and watch the video too.
got a cab of it?
Right, It's USA only... HD2 isn't even on the list and not downloadable on that website.
So whats this post all about?
There is a cab available, it does work on the HD2, to a certain extent. It's from the Samsung Intrepid, which I believe is a non-touchscreen phone, so touchscreen doesn't work properly (and we don't have arrow keys to compensate).
The program promises a lot, but delivers poorly. The voice recognition is quite poor (on my Scottish accent anyway). It can dictate a text message, but you'll be lucky if it picks up anything you're saying correctly.
elyl said:
There is a cab available, it does work on the HD2, to a certain extent. It's from the Samsung Intrepid, which I believe is a non-touchscreen phone, so touchscreen doesn't work properly (and we don't have arrow keys to compensate).
The program promises a lot, but delivers poorly. The voice recognition is quite poor (on my Scottish accent anyway). It can dictate a text message, but you'll be lucky if it picks up anything you're saying correctly.
Click to expand...
Click to collapse
Thats true it doesnt work properly with non-american accents. I tried to search for La Tasca, it came back with a resualt of blackass.com ???????
I had to speak slow, but it did work eventually.
Out of interest, do anyof you have a cab for Microsof Voice Command ? I have the 1.6 version however it doesnt work on my HD2
vardig said:
Thats true it doesnt work properly with non-american accents. I tried to search for La Tasca, it came back with a resualt of blackass.com ???????
I had to speak slow, but it did work eventually.
Out of interest, do anyof you have a cab for Microsof Voice Command ? I have the 1.6 version however it doesnt work on my HD2
Click to expand...
Click to collapse
Make sure you use the corect MVS, i used 1.6 and it killed phone, not responsive to anything so hard reset saved me.
It actually requires MVS to work correctly but as others mentioned, its not good. Unlike the Youtube demo, it barely recognised what i say on several occasions and i spoke very cleary, slow and with no strong accent etc. Needs alot more work.
does not work at all on my hd2
i installed it and it loaded initially, then when i try to start it, it doesnt come up at all. i tried to install a new version of microsoft compact framework or whatever but then the phone will tell me i have to remove the previous version ,but then i obviously cant b ecause it does not appear in the remove programs list. this is very frustrating, can anybody help me?
Gateau Noël said:
i installed it and it loaded initially, then when i try to start it, it doesnt come up at all. i tried to install a new version of microsoft compact framework or whatever but then the phone will tell me i have to remove the previous version ,but then i obviously cant b ecause it does not appear in the remove programs list. this is very frustrating, can anybody help me?
Click to expand...
Click to collapse
Only worry about a newer version of .Net if you're actually told by an application that you need it. Also, when installing something and it tells you you need to remove the existing version, that means it's already installed. The .Net 3.5 installation will not tell you you need to uninstall .Net 2.0, so you've already got the version you tried to install. Just forget about it.
I believe it needs MSVC to work, although I'm not sure. I think I had to install MSVC.
I've never installed it since, since it was so crap - I have a very neutral accent, and even tried an American accent, but it was still pish.
i have it on my TP2......it suuuucks and my accent IS american, lol.
btw, it will put asterisks in place when you use curse words, haha, at least it recognizes them with no problem, go figure!
I tried to send a text message, it got everythin right, but the message just sat in my outbox ...
Anyone else try this??
Marty
i just noticed that 'translation', blackass.com, lol. i wonder what you would have got if you DID ask for blackass.com! :O) ahhh, technology, more fun than the proverbial barrel of monkeys at times!
better this , voice ommander or something else? just to understand the maerket now
works great on my tmobile htc hd2
Oh, I hate TellMe so much I want to scream. I've managed to successfully use it on two occasions (where it actually understands what I've said). More often than not, it simply "thinks" and "thinks" until, ultimately, saying "Sorry, didn't catch that". I don't doubt that it works great for some people, but for this thick-accented outer-Bostonian, TellMe is an exercise in futility (and definitely not an app to break out to show off the HD2's power!!).
martywix said:
I tried to send a text message, it got everythin right, but the message just sat in my outbox ...
Anyone else try this??
Marty
Click to expand...
Click to collapse
I'm having the same problem.
I downloaded the TellMe application for HD2 at mobile underground
I have installed the WMPPC_TP_TP2_HD2.cab on my device and the application runs but when I send a text message the message appears to send ok but then gets stuck in my outbox. The message stays there until I send a text the old fashion way and then all the text messages are sent out.
The instructions on the mobile underground website say to make sure you have .NET CF 3.5 version:
*TELLME*: Install NETCFv35.wm.armv4i.cab.zip first on your WM PPC, before installing the TellMe App, get it here media..fire...
Click to expand...
Click to collapse
But, I when I tried to install this I received a message saying I already had a newer version. See screen shot showing my 3.5.9198.0 version of the .NET Compact Framework. So, I'm assuming I have a newer version that should work with the TellMe but so far I have been unable to get it to send text messages properly.
Also, I'm running Voice Command v1.6.21889 , which came on the phone originally.
Has anybody else had this problem? Anybody know of a solution?
I have two T-Mobile HD2's sitting here with this installed, all work fine, except the same outbox issue on texts. I wonder what could be the issue or if there was some way to trigger the sending automatically.
I have an idea but not sure how to make it happen.
Obviously the TellMe application is only composing the message and putting it in the outbox.
So, the HTC Messaging should be able to periodically tell that a message is waiting or simply just try to send messages every now and then. After looking at the option in the Settings->Options while you are in the message application you can see that there are 4 options for Delivery: Immediate, 1 hour, 1 day, 1 week.
I wonder if there was a way to set the delivery at 1 second if it wouldn't try to send the message. This is just an idea and I'm not very experienced in customizing phones but I do some programing and could see this as a possibly.
____
The other option would be to write a small program that would check the outbox and send any messages in it. Then you could use voice command or tell me to run the program by creating a short cut the this small program and calling it "Send Messages" or something like that.
Anybody have comments or suggestions on either of these ideas?
Hello, I searched the web for a solution and have found none... Well.. my problem is random closing of programs on my omnia i900.. It happens when, lets say, I have opera opened, and i get sms, so when i minimize program to view message it automatically closes... Or sometimes it happens even with one program opened, like when I listen music with S2P and after some random time it automatically exits.. So, I have wondered if anyone had problem lie that, and if someone knows how to fix it.
PS. Im using sector & khuanchai rom.
thanks in advance, and sorry for bad english
kira993 said:
Hello, I searched the web for a solution and have found none... Well.. my problem is random closing of programs on my omnia i900.. It happens when, lets say, I have opera opened, and i get sms, so when i minimize program to view message it automatically closes... Or sometimes it happens even with one program opened, like when I listen music with S2P and after some random time it automatically exits.. So, I have wondered if anyone had problem lie that, and if someone knows how to fix it.
PS. Im using sector & khuanchai rom.
thanks in advance, and sorry for bad english
Click to expand...
Click to collapse
I don't have such a problem better try a new ROM
Hello, in the past weeks WP7 Mango was ported to the Toshiba TG01 device. Now the basic functions like phone and marketplace etc are working. but there are several problems to fix, like a SMS problem:
i can't send SMS when the number is saved in
+49(178)...... or
0049(178).....
format.
when it's saved in
0178....... format, it works!.
- does anybody know, what's wrong? registry etc.? i did a "connection setup" and also deleteted the number of "sms center" field, but nothing worked.
Looks like it's a known issue. I guess you'll need to hang on.
STILL buggs:
- no camera, no sensor function
- no youtube support
- no internet radio stream support
- SMS format +49171xxxxx will not send SMS, only in 0171xxxxx format ....(+49 germany ...)
Discuss the issue here: http://forum.xda-developers.com/showthread.php?t=1431827
yes, i know, that it's well known.
I posted it intenionally here, because maybe developers for other devices had the same problem when porting WP7 to their devices. by now, unforunately nobody in our forum had an answer. now i found out, that i couldn't even save a number in the field "SMS service center".
I would have just left WM on it.
sinister1 said:
I would have just left WM on it.
Click to expand...
Click to collapse
it use it just as a toy have another wp7 device for real life. but want to get this problem solved!
DerSchorsch1 said:
yes, i know, that it's well known.
I posted it intenionally here, because maybe developers for other devices had the same problem when porting WP7 to their devices. by now, unforunately nobody in our forum had an answer. now i found out, that i couldn't even save a number in the field "SMS service center".
Click to expand...
Click to collapse
Ì can't save the number either, it just stays blank. Any solutions?
badboy70 said:
Ì can't save the number either, it just stays blank. Any solutions?
Click to expand...
Click to collapse
I have exactly the same problem. Have you managed to find a solution or a workaround? Any help is welcomed.