Related
Under WM2003se on my XDA2 and XDA2i it keeps breaking, and causing screen corruption when I reinstall.
Under wm2005 it's perfect.
Any ideas on this?
On my 2i the intellipad works fine most of the time, but then after so long it doesn't appear. If I try to change to the default keyboard then the icon in the bottom right changes, yet the keyboard does not appear. Similarly if I then try to change it back to IP, the default keyboard icon remains and I have to soft reset.
I'm on an o2 xda2i, but now using the iMate 1.11 WWE ROM and it happened to me again last night, so it's not the 1.10 ROM in itself.
Ant
Yup same for me, except sometimes I have to actually reinstall from the cab file
Works perfectly well under WM2005 in an XDA2 though.
I wonder if it's a specific application that causes it to break?
OK it's broken again, and no amount of soft resets, or re-installs of either the v1.0 or t-mobile customised pad will get it working again.
If I could get that working perfectly, I would be able to give up WM2005 for most things, and use my xda2i for practically everything.
http://www.pocketpcthoughts.com/forums/viewtopic.php?t=41421&postdays=0&postorder=asc&start=10
Too many resources are being consumed by Today plug-ins, other SIPs, etc.
I removed some Today plug-ins and lo and behold, my IntelliPad re-emerged!
Woohoo! Leave it to a PPCT guy to come to the rescue!
I could kiss you! (in a manly non-gay way of course)
It's worked, that was one of the main things that stopped me ditching the XDA2 with WM2005, now I am quite happy to use the XDA2i with WM2003se with intellipad
Thanks for replying here or I would never have seen that
<<<happy guy
Anyone have any luck getting MC VC 1.6 to work on the Touch Cruise via bluetooth? I can get it to work via the buttons on the TC itself, but not via any of the bluetooth headsets I have. I also have an AT&T Tilt and 8125, and I don't have any issues using MC VC 1.6 and bluetooth headsets with either of those phone.
I've tried all the fixes I've found so far, but none of them have worked so far. If anyone's got any ideas how to get this working, I could use some help.
Stumped,
Dave
Hi Dave. I have MS VC 1.6 up and running on my TC via bluetooth on my Jawbone no problem. Know it doesn't help to answer you questions, but it does work.
Dan
Dan, thanks for the reply. I got it working, but had to jump through some hoops to get it working, and I'm not sure which step was the one that finally got it working. Seems to be working OK, but I no longer have a flashing blue LED light on the TC to show that Bluetooth is turned on.
Did you have to do anything special to get it working? Can you tell me what build of MSVC you're using?
Thanks,
Dave
MS VoiceCommand v1.60.4622.0
Hi and sorry for my pour english,
I installed MS VoiceCommand 1.6 Fr on my HTC Cruise.
Everything works fine except that the blue LED does not flash when I turn "On" the BT.
If I remove MS VC with the BT "On", the blue LED restart to flash. And if I reinstall MSVC, it stops blinking.
I still have a look at this forum and the other ones, but I didn't found the solution.
Maybe someone can help me ?
Bemi
How could i get this to work on the S9's on the Tilt and 8525 instead of the voice recognition app?
MSVC Broke my BT,could not connect to my Moto S9 with it installed. Had to uninstall VC to get BT back. Anyone else have this prblem?
bemi said:
Hi and sorry for my pour english,
I installed MS VoiceCommand 1.6 Fr on my HTC Cruise.
Everything works fine except that the blue LED does not flash when I turn "On" the BT.
If I remove MS VC with the BT "On", the blue LED restart to flash. And if I reinstall MSVC, it stops blinking.
I still have a look at this forum and the other ones, but I didn't found the solution.
Maybe someone can help me ?
Bemi
Click to expand...
Click to collapse
Bemi, exactly the same thing for me, with MVC 1.6 fr on my TC french SFR opérator
waiting for some trick to fix that blue led
I have the same problem with the blue light (it is really a very strange bug...)
An other question, with BT on: I try to use the vocal command with the head set and the phone on stand by nothing happens if I turn it on the phone (but the phone is still locked) nothing happens. I have to unlock the TC to be able to use the MSVC with a bluetooth headset.
is it normal???
Hope my question is clear...
Thank for any help/info
dfields said:
Dan, thanks for the reply. I got it working, but had to jump through some hoops to get it working, and I'm not sure which step was the one that finally got it working. Seems to be working OK, but I no longer have a flashing blue LED light on the TC to show that Bluetooth is turned on.
Did you have to do anything special to get it working? Can you tell me what build of MSVC you're using?
Thanks,
Dave
Click to expand...
Click to collapse
@dfields,
Could you please explain what you did to get VC to work? does your BT work after instaling VC? Not just the flashing LED but are you able to connect to a BT headset?
XDA Orbit 2 and Voice Command does not announce incomeing calls
Hi,
my device: XDA orbit 2 = Touch Cruise = Polaris
OS: WM6 GER
VC 1.6 GER
I know that there are problems, but i also do know, that it can be solved. there are some files to be replaced on the phone. i tried the ones that are offered in another thread for another wm6 phone, but the dont work. i guess, because they are for the english version of VC 1.6, but i have the german version.
does anybody know, wher i can get these files? or how can i make VC 1.6 to announce incomming calls on my xda orbit 2?
Thanks
Hello!
I tested some WM6 ROMs and I always had the same problem. When I put my Wizard into the cradle of my PC it keeps on waiking up. I switch it of and 2 minutes later it switches on again, starts synconisation and stays on till I switch it of again. I never had this problem with WM5 ROM (I only tested 2) and I had this problem with all WM6 ROMs. I tested TNT WM6.1 19199 v2, Pansen WM6.0, German WM6.1 and a last ROM (WWE) but I cannot remember the name. There is only one german guy I know of who has the same problem. The Wizard does not wake up when charging with the PSU. It only happens when connected via USB to the PC.
I use WindowsXP SP2 and AS 4.5.
Do you have the same problem? Is there a workaround? Please help! This way it takes so much longer to charg the battery.
Thank You!
Cyberdyne
Hello!
I have also observatet the same problem whit various WM6/WM61-ROM's.
How cyberdyne has writen: every all 2 or 2,5 Minutes the device is wake up und starts automatical AS, although there are no changed datas or other things for forward/sync.
So i have check in the registry some entrys for timers or swithes, there are tax this. I have only found few entrys, there i mean, the are for tax the AS-WakeUp.
Some times i have think, i have found the right entry. But when i allow one Sync and switch the device off, in the follow the device get's the old problem: after switching of the device automatical wakes up all 2,5 minutes and start AS (after AS the device remains switch on).
In WM5 the device "sleeps" for USB-Charging, if the device is switching off. I will have the same effect by WM6/WM6.1-OS.
Who knowes the registry entrys, there are tax the follow AS-WakeUp's and AS-start's after the first "connect-sync" wenn connect to USB?
Greetings Frank
No answer?!
What does that mean: Noone reads this thread or noone has this problem?
had never seen this before~
are we germans the only ones, they are have this problem?
If it be so, so must it be a problem by german keyboard-change-programs... But keyboard and AS are different things!
greeting Frank
fraham said:
are we germans the only ones, they are have this problem?
If it be so, so must it be a problem by german keyboard-change-programs... But keyboard and AS are different things!
greeting Frank
Click to expand...
Click to collapse
Dutchy here!
With the same nuisance........
It keeps turning on and sync....
I upgraded my S200 to WM 6.1 and the usb sync stoped working; I still can charge, but there´s no sign in activesync that PDA has been connected.
All is working well, no problem @all, but no sync... The bad thing about that, is that I cannot install/downgrade/upgrade another WM (or any other stuff) because it doesn´t detect the usb...
3 colors boot problems, white screen problems, everything, I solved all just by reading your help here @forum, but for this problem, I can´t seem to find a solution/answer... although I may have seen something about it but I looked everyhere again, and didn´t find the answer.
Everything is (I think) well connected, configurated, etc. I didn´t do anything else besides installing a WM 6.1...
Any ideas folks?
Tks in advance
Nuno RC
I hate to sound like a one trick pony but have you tried disabling advanced network functionality under settings, connections, usb to pc?
Well yes, I´ve seen that advice here I think; done that and nothing, then soft-reseted and still nothing... it´s a little bit frustrating; I don´t dislike this ROM, but the sh#t is I cannot install anything else...
Tks anyway mate :/
PS. I already unistaled and re-instaled the most recent activesync, hard-reseted the pda; didn´t switch the cable because it is charging correctly (and an hour earlier was working fine in sync)... I dunno, lots of stuff..
If that ROM is not working, it may well be ROM specific. Try a different WM6.1 ROM, and make the ROM chef aware of the issue!
Hi there,
First of all, I am sorry for my rusty english I am from Portugal and my english it's a little bit rusty
Well, I searched the entire forum ( I think) and I still don't discover the solution for my problem.
I have a Qtek G100, and after I made a hardreset, I simply can't start the gps utility or how to enable the gps ... I installed a software gps (beelinegps) just to try the gps and nothing... it seems that the gps is disabled.
Can anyone help me ??
thanks, and once again sorry for my mistakes!
Cheers,
dambrosio