Database Info

Vox video playback capabilities

Does anyone know what are video optimal encoding settings for Vox. I was using nokia n73 before vox and I thought they had same speed processors but mp4 files which had h264 video codec are played jirkey on Vox. I am using coreplayer. Does anyone know how much FPS with how much bitrate is optimal for Vox. On N73 I was ripping in H264 video codec, level 1.1 profile, FPS converted to 15, bitrate from 325 to 382kbps. With AAC-LC 96kbps.
When this file is played on vox playback is not smooth.
Anyone optimized settings.?

Well, what player did you use?

I tried to play it on TCPMP but it was not supported so I palyed it on CorePlayer. H264 playback was jerky but xvid was working fine.
In symbian that is N73 there was whole topic of video converstion guide that which bitrate is best at which codec. I think no here has done any such thing. Do you have any idea how to check what Vox processor can support? How to check other than hit and trial.

CorePlay should have a utility that can benchmark and you can calculate out of those numbers what playback settings should be the best.
I would use XViD, since you're encoding them yourself. Move the audio off of AAC as well, use MP3. MP4 and H264 are heavy containers and will require more processing. Vox has a iddy biddy TI OMAP850 @ 201MHz proc that barely cuts it.

h4waii said:
CorePlay should have a utility that can benchmark and you can calculate out of those numbers what playback settings should be the best.
I would use XViD, since you're encoding them yourself. Move the audio off of AAC as well, use MP3. MP4 and H264 are heavy containers and will require more processing. Vox has a iddy biddy TI OMAP850 @ 201MHz proc that barely cuts it.
Click to expand...
Click to collapse
Well, yes AVC codecs require much more porcessing power that ASP. Any idea about Xvid or Divx compatible encoding settings.??

Ok. I am settled with 25 FPS, Xvid, with 400kbps and mp3 41khz with 128kpbs. I still get 127% on benchmarking but i think these are good setting for smooth playback and good quality video.

video

does any one know how i play video files on x7510,i tryed wmv and mp4 avi they dont work

play these files with coreplayer,nd if there is a sound lag u r observing,then goto coreplayer-preferences-advanced-down in the list there is an option for +/- av offset,set it to -600,also like done with advanced setting,once again goto preferances-video,try to change the video drivers from default ati imageon to other given such as raw frame buffer,gdi etc....enjoy

Use Xilisoft 3GP Video Converter (ver. 5.1.22.0305 or higher) and convert video with profile "BlackBerry MPEG-4 Video (*.mp4)" - set resolution to 320x240 or 352x264 (in "Profile Settings"). It may be appropriate and another converter with BlackBerry mp4 support and with resolution 320x240 or 352x264. This will give the best results for playback of video in standard Windows Media Player in HTC Advantage (I think it use hardware acceleration). Better than CorePlayer or TCPMP!!! Recommended for all! Complete synchronization of video and audio, smooth and excellent quality without lags.

were do i get corplayer or blackberry converter from

http://www.xilisoft.com/3gp-video-converter.html

For example, I was convert the "Matrix" advertising to format for the our WMP (BlackBery, 352x264, 1500 kbps, 24 fps). You can download and view:
http://rapidshare.com/files/211370712/RL_XQ_352x264_1500_112.mp4.html
or
http://rapidshare.de/files/46224820/RL_XQ_352x264_1500_112.mp4.html
(And remember, open only with WMP - in full screen)

[Q] Best format for video

What is the best for playing movies? I plan to rip some from Dvds, and wondered what would play best. I am using Vegan 3. I dont know much about divx vs other codecs.

I use mp4 I have 22 video and they only take 20gb of space. I have heard of guys using .mov but I think it is a full 1080 few so it will probably use a lot more space. I think mp4 is only 720 capable

JoeMofknDot said:
I use mp4 I have 22 video and they only take 20gb of space. I have heard of guys using .mov but I think it is a full 1080 few so it will probably use a lot more space. I think mp4 is only 720 capable
Click to expand...
Click to collapse
I want to convert some mkvs and some DVDs to mp4 for an up coming trip, has anyone used handbrake? If so what profile or preset are you using?

jamesgf said:
I want to convert some mkvs and some DVDs to mp4 for an up coming trip, has anyone used handbrake? If so what profile or preset are you using?
Click to expand...
Click to collapse
Handbrakes stock settings work fine for me I tried anyvideoconverter but converted files gave corrupt error

Depends on the source. DVD = standard video, so I would actually recommend Xvid in an AVI container. They play very nicely, plus it's a pretty standard format. And for problematic AC3 audio, you can use an app like Rockplayer. MKV also works nicely in Rockplayer. Or you can even encode to MP4 if you want iPod / iPad compatibility.
For High-Def, I would personally recommend MP4 (h263), only because h264 is so problematic. I use Handbrake and then alter the iPad Profile from h264 to MP4 (h263) and it works very nicely on our device. Yes, it's not "standard" so my files are really only for this device or my PC.

I'm not an expert on video formats or ripping/converting. However, I've spent the last couple of days (off and on) trying to find the best way to get vids on the gTab. As of this morning, the best option I've found is using Pazera. I used the "Video to iPod" converter with the following settings:
Output file format
MP4 (MPEG-4/AAC)
Bitrate: 1000 kbit/s
FPS: 30
Audio - Left it in "Auto"
Advanced Settings
Resolution: 1280 x 720 - HD720
The quality looks really good. No issues with the audio either. My only problem is the file size is 1.2GB. The vid I converted was 2 1/2 hours but I still think I want the file size around 500 to 700MB. I'm going to adjust the settings some more and see if I can find the balance between video quality and file size. It just takes an hour or so to convert it so this may take a few days.
I hope this is helpful to everyone. If anyone else has any experience with Pazera and can recommend good settings, I'm all ears!

Sly Soft's AnyDVD to rip and them AnyDVDMobile to convert (I use ipad's default settings on the mobile conversion and they work great - I use those settings b/c I my kids use the same rips for the ipod touch and it comes out as something they all can use (rather than keeping multiple copies for each device).

I have been using this to convert HD video into something the hardware decoder can play without issue:
Code:
INPUT="My_movie.mkv"
OUTPUT="My_movie-gtab.mp4"
ABITRATE=64k
VBITRATE=1500k
RESIZETO="-s 1024x576"
ffmpeg -strict experimental -y -i $INPUT -f mp4 $RESIZETO -vcodec libx264 \
-vpre default -vpre ipod640 -acodec aac -ab $ABITRATE \
-ac 2 -b $VBITRATE -threads 0 $OUTPUT
1000k for the video bitrate would net you about 480M/hour, with 1500k at about 700M/hour (which is fine by me).
The RESIZETO will work for 720p and 1080p content as it's resizing for the longer width. If you have SD content (DVDs) just comment out the RESIZETO. If you have something that is anamorphic (check ffmpeg -i $FILENAME) you will need to do your own math, or just leave it and up the bitrate. A good rule of thumb for high quality is:
0.14 * Height * Width * frames/sec
So 0.14 * 576 * 1024 * 29.97 = 2477260bps, or ~ 2500k, about 1.1G/hour
adjusting the number downward will reduce quality, but it's a choice between video quality and size at this point.
I have tested this with a few videos (Big Buck Bunny, originally 1080p content) and with some 720p videos. 1500k worked out really well.

Great info ckelly33 and ckelly. I'm starting to think the question is more on "what are the acceptable formats". Everyone is different and the output they are looking for is just as different. I'm still trying for 500 to 700MB.
I tried again and I think I've got it like I want it. Need to test it some more. On the last conversion I noticed a button for max file size. That got me right where I want to be!

ima_UNC_fan said:
Great info ckelly33 and ckelly. I'm starting to think the question is more on "what are the acceptable formats". Everyone is different and the output they are looking for is just as different. I'm still trying for 500 to 700MB.
I tried again and I think I've got it like I want it. Need to test it some more. On the last conversion I noticed a button for max file size. That got me right where I want to be!
Click to expand...
Click to collapse
So far, It has accepted mp4 and avi containers (I prefer mp4), as well as mp3/aac for audio and h.264(main profile). Reports from roebeet says h.263 works as well. I have not tested xvid yet. I had issues with ac3 audio, so I don't think it supports that.
Of all of those, h.264 is a very very high quality codec, so I would recommend trying to use h.264/aac for encoding if at all possible.

What software do you use to play 1080p mp4 movies?

I tried RockPlayer Lite and some other players in the market but none work.
Please help.

vitalplayer?

Try doubletwist. Plays mp4

junks2010 said:
I tried RockPlayer Lite and some other players in the market but none work.
Please help.
Click to expand...
Click to collapse
It's not really just a question of what player - it's a question of what 1080p mp4 files too. Tegra 2 is extremely limited in what it will play back in a 1080p mp4 so how the mp4 is encoded matters as well. I think I read somewhere that it's baseline profile only...and that's with hardware acceleration. Software only, I'm guessing that no file of that size will play - it's too many pixels to push around.
And Rockplayer is my mp4 player of choice (to the extent I actually registered for it to get rid of the ads and the R). In hardware mode, it doesn't bat an eye at my 720p mp4s in main profile.

Judo Jeff said:
It's not really just a question of what player - it's a question of what 1080p mp4 files too. Tegra 2 is extremely limited in what it will play back in a 1080p mp4 so how the mp4 is encoded matters as well. I think I read somewhere that it's baseline profile only...and that's with hardware acceleration. Software only, I'm guessing that no file of that size will play - it's too many pixels to push around.
And Rockplayer is my mp4 player of choice (to the extent I actually registered for it to get rid of the ads and the R). In hardware mode, it doesn't bat an eye at my 720p mp4s in main profile.
Click to expand...
Click to collapse
x2. If the 1080p video is encoded the right way, even the vanilla player will play it.
I've been using h263 1080p / 720p MP4's and they work well. Even some MKV's will work with the vanilla player, if encoded a certain way.

roebeet said:
x2. If the 1080p video is encoded the right way, even the vanilla player will play it.
I've been using h263 1080p / 720p MP4's and they work well. Even some MKV's will work with the vanilla player, if encoded a certain way.
Click to expand...
Click to collapse
Any luck getting h264 1080p to play? Any specific software you recommend to convert files to appropriate encoding?

I've had success in the past doing it and watching 1080p .mov movie trailers but haven't done so since I've upgraded to TnTLite 5.0. I would recommend Handbrake for encoding and then playing with it. From using Mediainfo on them, I think they were Level 4.1 main profile with 2 reference frames, no Cabac.
I found this on fudzilla from google (I can provide a link if needed)
First of them is H.264 with sub standards Baseline Profile (B frames) — 1080p/20Mbps, Main Profile (B Frames, CAVLC) — 1080p, Main Profile (B Frames, CABAC, no weighted prediction) — 720p/6Mbps and High Profile (B Frames, CABAC, no weighted prediction).
Tegra 2 also supports High Profile (B Frames, CABAC, no weighted prediction), MPEG-4 (Simple, B frames and ASP Profiles) — 1080p/8Mbps, H.263 (Profile 0) — 720×576/4Mbps, DiVX (DiVX 4/5) — 1080p/8Mbps, XviD (XviD Home Theater) — 1080p/8Mbps, MPEG-2 (Main Profile @ Main Level) — 720×576/10Mbps, VP6 (simple and advanced profile) — 720p30/2Mbps, Sorenson (simple and advanced profile) — 720×576/4Mbps, JPEG up to 80 Mpixel per second.
Click to expand...
Click to collapse
Caveat - 1080p encoding is slow and the files are big. Unless you are doing 1080p encoding for some other purpose, I wouldn't do it just to play on the G-Tab. It really seems to be stretching the limits of the technology. I prefer to do a really good quality 720p encode instead. They look equally good on the G-Tab at a smaller file size - and on a 60" plasma I still can't tell that they're worse. I had floated my encode parameters for handbrake somewhere back in this section.

vitalplayer, vanilla player? What is better, what supports more formats and it is more convenient?

absorbers said:
vitalplayer, vanilla player? What is better, what supports more formats and it is more convenient?
Click to expand...
Click to collapse
The only luck I've had with hardware accelerated video (the high-def stuff) is Rockplayer or vanilla player. Don't like the lack of file browsing you get with the vanilla player. You can get around that by using a file explorer to open your videos instead of the gallery.
I have a couple of mkvs that Rockplayer won't play (SD ones at that), so maybe an experiment is in order!

[Q] Video Convert configurations

Guys I have HTC sensation,
Can any one tell me the configurations to convert the video to play on my phone..
like wise,
video size
bitrate
frame rate
aspect ratio
etc
video codec
I use imToo video converter..
I need HD video..
everytime i convert I see quality is gone worse..
Help././

Just use some more advanced media player, like MX Video Player. Streams mkv, mp4 and avi seamlessly over upnp - So ill guess it plays most others as well.

I'm using DicePlayer. It plays everything so far.

Either use MoboPlayer
https://play.google.com/store/apps/...GwsMSwxLDEsImNvbS5jbG92NHIuYW5kcm9pZC5uaWwiXQ..
Or convert your videos to be 960x540