I used to have a Blue Angel, now I have a Kaiser - both suffer from the same annoyance.
In Fn mode, the Backspace (delete to left of cursor) becomes Delete (Delete to right of cursor) and the arrow keys turn into other things as well.
The backspace issue would be circumventable if the left arrow still worked, you could do LEFT, DEL instead of BKSP.
All I would like is some way to be able to punch in numbers but still be able to access BKSPACE...
Thank god it works as I want in the phone dial screen on the kaiser (automatically assumes number on key not letter) which was the main reason I wanted something like this, but some way to have a fn lock that only changes the keys with numbers on them rather than all the blue Fn symbols (ie changing bksp) would be nice too.
Any ideas?
Hi All,
I have been trying to get japanese input working on my Raphael, and have run into some problems. Here's what I have done:
1. Installed LesJapanNo6 - all working/tested no problems
soft reset
2. Installed IME_31J_QVGA_F file
soft reset
-> manila.exe error, device.exe error, and another exe error (can't remember now - think it was TouchFlo3d related). Hardware keys dead.
3. Made the registry edit to get hardware keys working
soft reset (note, regional settings still Japanese)
After that, every time I would try and input something, or change the input method, I get ongoing crashes in device.exe (until I closed the kayboard).
I then decided to change the regional setting back to English (UK), and then soft reset. Now it starts with no errors, but input is stuck on hiragana and the keyboard icon has disappeared so no standard romaji input.
I think I now have to install the enable_ime_2 and/or enable_ime_3 cabs, but am paranoid I have already done something wrong (crashes etc from step 2). Can anyone more experienced hint at the final steps to get this all working?
Thanks,
Raj
The steps you have above should work fine, but use the VGA version:
http://rapidshare.com/files/159514259/IME_31J_F.cab.html
You might need to go ahead and hard reset before you try again.
Just for reference, I have LetsJapanNo6 and IME_31J_F on my Raphael 1.90.405.1 WWE (UK stock ROM), with the following reg tweaks applied:
Code:
[HKCU\Keyboard Layout\Preload]
default = "E0010411"
[HKCU\Keyboard Layout\Preload\1]
default = "E0010411"
[HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME]
Option3 = "D"
[HKLM\System\CurrentControlSet\Control\Layouts\e0010411]
Keyboard Layout = "00000409"
Word of caution: when you go to edit the reg values, highlight the text and write over it; don't use the backspace key, because for some reason it inserts a lot of garbled text. Once you've saved the reg edits and soft-reset, the backspace key functions as normal again.
Also consider using PQzII to map keycode 0xE6 to IME; this will allow you to press the SYM key on the hardware keyboard to toggle between ascii (A→a) and kana (A→あ) input.
Other known issues: JP IME breaks T9/word suggestion, some other minor oddities.
SoftBank is releasing its version of the Raphael, so be on the lookout for a native JP ROM (which will have everything set up correctly) in the future.
Working perfectly now, fantastic!!!
Thanks!!!
I tried to map the SYM button to IME. But there is no way for me to specify 0xE6 in the IME menu.
is the new Raphael PQzII different?
aquasesh said:
I tried to map the SYM button to IME. But there is no way for me to specify 0xE6 in the IME menu.
is the new Raphael PQzII different?
Click to expand...
Click to collapse
I typed it in.
I'm using 008e1, but the latest e2 should be fine.
I have had this working for about a month now but was wondering how to get a keyboard shortcut to switch the kana/romanji input. This works perfect.. thanks!!!
thanks!!!
just a shot question:
as I use the hw-kb of my xperia for inputting text, it would be cool to have the tegaki-kb as standard one. Whenever I set it in Windows Mobile-Settings, it gets switched back to romaji-kb on restart.
is there a reg-hack for this?
would greatly appreciate your help!!!
ttkman said:
just a shot question:
as I use the hw-kb of my xperia for inputting text, it would be cool to have the tegaki-kb as standard one. Whenever I set it in Windows Mobile-Settings, it gets switched back to romaji-kb on restart.
is there a reg-hack for this?
would greatly appreciate your help!!!
Click to expand...
Click to collapse
It might be a problem with Xperia Panels resetting it to romaji-kb (TouchFlo3D does the same thing on the Touch Pro).
If you use PQzII, you can configure it to override the default input panel. You can even specify different default panels for portrait and landscape. Just open up the setup program (PQzII_Setup) and the settings is on the first page.
nevermind, got everything working!
thanks!
Hello all.
I want to ask someone,how can I enter this symbol ° on a WM6 Smartphone?
I want to enter GPS coordinates to my Toshiba for geocaching,but I didn't found that symbol anywhere.
Is there a way to modify the symbol table(normally poped up by holding # button during text enter),because I want to have more useful symbols instead of the smilies f.ex.?
Thanks very much in advance,Tomas.
Ok, I searched around for about an hour, and must not be using the right search term or something. Anyway,
I have an HTC HD2, and i'm trying to run gotomypc with it (and pandora). I can run both, but i have to map the hardware button to my input panel in order for it to come up in either application. Thats all well and fine, except i also like the default long press key option that brings up my voice command. (And for those that don't have an HD2, there is only 1 mappable hardware key). So i have to jump back and forth on button assignments to use applications.
So point is, i installed AE Button Plus, and it appears to be able to do the trick, yet i can't find what file to point the assigned long press button too. Where is "input panel"/aka SIP located at/what directory?
Or does someone have an easier suggestion for mapping a previously unassignable hardware key to the SIP?
Thanks in advance!
I have a verizon tp2 that i bought on ebay recently and it works great other than a little issue with some of the function keys. more than half are not the one that the key says it is and others don't work at all, some are the correct key. for instance the ":" key actually produces a "/", the ";" key produces a "\", trying to type a comma just results in it doing a period which is the primary function of that key. "=" is a "_", and on and on. interestingly, all the symbols on the number keys work correctly and " is a " so not all of the symbols on the letter keys are messed up, but most are.
the keyboard is set to english, my region is USA, and the on screen keyboard works correctly.
It came loaded with energy rom and I just loaded the most recent version of energy on it cause i kinda like it and i was hoping reloading the rom would fix it, it didn't. I have looked all over for settings related to this and i see nothing. Is the keyboard itself screwy or something?
you just need to install the verizon keyboard cab, or install the verizon provisioning. it's in the energy rom thread
awesome, that fixed it thanks. If anyone else has the issue and wants the fix I linked it here.