Database Info

NEW ROM: RUU-Prophet-AKU2.2-2.20-2.47.21-Jester-r1

Hi,
I've created another ROM for the Prophet
This is based on the Qtek 2.20 WWE ROM (thx mwiberg)
This is a very clean and stable ROM, it has the standard Qtek 2.20 WWE ROM, with the qtek links/images/junk taken out, and it has some patches in the ExtRom to enable MMS/GPRS/A2DP
This ROM will upgrade your SPL to 2.20.000
This ROM will upgrade your Radio to 02.47.21
This ROM will upgrade your OS to the Original Qtek AKU 2.2 OS (2.20.7.34 WWE)
This ROM contains my own version of the Qtek ExtRom (2.20.7.114)
This ROM has a patched installer, so it will not check your CID
This ROM has both splash screens changed (the white HTC one and the next one with the IPL and SPL info)
This ROM has a standard page pool of 12MB
My ExtRom:
A2DP_Cert_Signed.cab = Certificate to install the A2DP patch
A2DP_Patch.cab = A2DP Patch
AutoRun.exe = Needed to start the ExtRom Installation
Cert_SPCS.CAB = Certificate for SPCS
Config.txt = config file for the ExtRom
MP-Shorcut-MMS1-Java5xx-CyberonVoice-CV-04Nov05.CAB = Voice Speed Dailer
MP_Customization_Prophet_Qtek_WWE_051205.CAB = Various Prophet/MMS/HTC registry setting
MP_CVSDcpl_20060220.cab = Voice Tag installer
MP_mHub_WWE_060124-2.CAB = WWE language
MP_MMSAutoDisconnect_060106.CAB = MMS Auto Disconnect Patch (stops GPRS after getting MMS)
MP_MMS_Patch.CAB = MMS Setttings
MP_SmartDialing_enable_0915_signed.CAB = Enable Smart Dialing
PP_DisconnectButton_16.CAB = GRPS Disconnect button
PP_ExtVersion.CAB = Set Ext Rom Version
PP_OperatorName.CAB = Populate the Operator Names Database
PP_Prophet-UAProf_AKU2.sa.CAB = registry setting for HTC prophet
prophet_a2dp.cab = A2DP Stereo Patch
P_ECall_112_911_QTEK_Wizard.cab = Set 112 and 911 as emergence numbers
P_PT_EnableSPN_Wizard_20060109.CAB = Enable download of Operator name (OTA)
Just download, run the file and after the upgrade is done, hard reset your Prophet (hold down both the camera and comm manager buttons on the side while pressing the reset button, hold the two buttons untill the screen comes up, then press the left green phone button)
Enjoy !
This is ONLY for G3
download G3 here
This is ONLY for G4
download G4 here

And yes, before you ask, I will release a splash screen updater for the people who don't like my Jester Splash Screen (Shame on you ! )

The Black HTC Logo's
This will ONLY replace both Splash Screens, it will NOT install or change anything else !
1. The White HTC logo will be replaced by a black image (nothing on it)
2. The Second Splash Screen will be replaced by a nice HTC Logo.
Download Here
Again, just download and run the file.

Thanks jester, another fine release im sure.
How does this differ to the b1 of the same description? Just want to know so i can decide if to go from the b1 to the r1

dannyoneill said:
Thanks jester, another fine release im sure.
How does this differ to the b1 of the same description? Just want to know so i can decide if to go from the b1 to the r1
Click to expand...
Click to collapse
go for this release, the other one is a beta, this is the release version
I contains some patches that were not in the beta (mainly MMS/grps/ad2p patches that didnt work correctly)

Jesterz,
After trying lsvw's roms, you finally came out of beta, so i am ready to try your rom.
My question is does your rom have the latest (8 button) comm manager, Sim manager and HTC's task manager? (lsvw's aku2.3 has that, which is useful for me, so i don't have to install extra-ware).
secondly, does do these two cabs do? PP_OperatorName.CAB and P_PT_EnableSPN_Wizard_20060109.CAB. I know you put in a short description, but what exactly does populate operator name do? and what exactly does download operator name do?
lastly, Does your rom have those so called "optimized" registry settings? such as increasing file cachse, disable animation, blah blah. Basically i'm asking if your rom is just a CLEAN rom or CLEAN and OPTIMIZED rom.
finally, there seemed to be flavors of 8 mb pp size and 12 pp size. based on your expertise, is having bigger pp size faster? lsvw claims his 8 mb pp is faster, which confuses me and seems to contradict definition of pool size :S
i've been following your work closely, so thanks for all your work, and dedication. i am diligently waiting for your aku3.3 results

Jesterz,
I have been using LSVWs 2.3 ROM and found it very stable, but not stable enough to not want to try this one
So I just installed this ROM on my G4 M600 and first impressions were great, very clean but also very very fast (interestingly I had used the 8MB page ROM as advised on other threads for the LSVW install???)
However I've hit a big problem, for me anyway. On registering my iTechS38 headset it correctly reports the device to have both "Hands Free" and "Wireless Stereo" services. Ensuring both these are checked I'm disappointed to find A2DP doesn't then work (Windows Media Player, Mort Player etc). In addition on returning to the Bluetooth configuration and holding on the iTechS38 entry I'm only offered to "Set as Hands-free" no "Set as Wireless Stereo" as I was previously offered with LSVWs 2.3 ROM. Editing the entry and both services are shown and are checked.
In an effort to check I hadn't just forgotten some basic step I reflashed my device with LSVWs new 2.3.1 ROM. Once again I was immediately able to add my iTechS38 and start listening to music.
Now that I've seen how clean and FAST your ROM is (along with other peoples comments on stability) I'm very keen to get it running with A2DP. Given the very prominent A2DP modules (which I saw being installed) and refinement comments for the R1 release am I just missing something really simple something here?
Can anyone else out there confirm they have A2DP working, ideally with an iTechS38 headset?
Thanks in advance
Jeff
PS I'm more than happy to have your artwork appear on each reset (it still does following LSVWs 2.3.1 update!) in my eyes it's the least acknowledgement we owe to you for all your efforts. I await your AKU 3.3 release with anticipation and would be happy if the only significant improvement was a resolution of the A2DP quality issues.

Jesterz said:
The Black HTC Logo's
This will ONLY replace both Splash Screens, it will NOT install or change anything else !
1. The White HTC logo will be replaced by a black image (nothing on it)
2. The Second Splash Screen will be replaced by a nice HTC Logo.
Download Here
Again, just download and run the file.
Click to expand...
Click to collapse
If you install this new logos, do you have to hard reset you device? i didnt understand exactly.
Thank you!!!

no, just run the logo update and thats it, it only flashes the parts of the rom which holds the pics.

dobbing said:
Jesterz,
I have been using LSVWs 2.3 ROM and found it very stable, but not stable enough to not want to try this one
So I just installed this ROM on my G4 M600 and first impressions were great, very clean but also very very fast (interestingly I had used the 8MB page ROM as advised on other threads for the LSVW install???)
However I've hit a big problem, for me anyway. On registering my iTechS38 headset it correctly reports the device to have both "Hands Free" and "Wireless Stereo" services. Ensuring both these are checked I'm disappointed to find A2DP doesn't then work (Windows Media Player, Mort Player etc). In addition on returning to the Bluetooth configuration and holding on the iTechS38 entry I'm only offered to "Set as Hands-free" no "Set as Wireless Stereo" as I was previously offered with LSVWs 2.3 ROM. Editing the entry and both services are shown and are checked.
In an effort to check I hadn't just forgotten some basic step I reflashed my device with LSVWs new 2.3.1 ROM. Once again I was immediately able to add my iTechS38 and start listening to music.
Now that I've seen how clean and FAST your ROM is (along with other peoples comments on stability) I'm very keen to get it running with A2DP. Given the very prominent A2DP modules (which I saw being installed) and refinement comments for the R1 release am I just missing something really simple something here?
Can anyone else out there confirm they have A2DP working, ideally with an iTechS38 headset?
Thanks in advance
Jeff
PS I'm more than happy to have your artwork appear on each reset (it still does following LSVWs 2.3.1 update!) in my eyes it's the least acknowledgement we owe to you for all your efforts. I await your AKU 3.3 release with anticipation and would be happy if the only significant improvement was a resolution of the A2DP quality issues.
Click to expand...
Click to collapse
I will have a look at this, mind you, I don't have a headset like yours so it's hard to test, also I don't want to "mess around" too much with these patches as I want to keep things stable and in their original AKU 2.2 state as much as possbile
for the other people, no this does NOT contain the "new" comm manager (which is WAY to slow and unstable if you ask me) or the task manager (as that is an AKU 3 feature) I don't want to mix AKU features with this release as I want at least this release to be stable and as close to AKU 2.2 and as clean as possible.

buggybug0 said:
Jesterz,
secondly, does do these two cabs do? PP_OperatorName.CAB and P_PT_EnableSPN_Wizard_20060109.CAB. I know you put in a short description, but what exactly does populate operator name do? and what exactly does download operator name do?
lastly, Does your rom have those so called "optimized" registry settings? such as increasing file cachse, disable animation, blah blah. Basically i'm asking if your rom is just a CLEAN rom or CLEAN and OPTIMIZED rom.
finally, there seemed to be flavors of 8 mb pp size and 12 pp size. based on your expertise, is having bigger pp size faster? lsvw claims his 8 mb pp is faster, which confuses me and seems to contradict definition of pool size :S
i've been following your work closely, so thanks for all your work, and dedication. i am diligently waiting for your aku3.3 results
Click to expand...
Click to collapse
the cabs, the first just puts two operator names in the registry (telecom operator names, like Orange,KNP etc) to create the entries as they are not there to begin with
the second cab enable OTA reading of the operator name (it will read the name of the telecom operator that is being transmitted from the GSM tower) and it will update the previous entry with the correct name
This ROM is clean, i didn't add the optimize reg setting you describe, you are welcome to do so on your own
the standard page pool is 12 mb, you would think the bigger to PP the better, however, if you decrease the pp to 8 mb the OS will have more memory available for programs, which might speed up your prophet, so it depends which software you run.
I believe the 8mb is a little faster, however it's not much.

hi Jesterz. My phone is O2 Neo with no CID Unlock. Can i upgrade my phone to your rom ??
Thanks for your answer !!

FYI, i have installed this rom for a week now...and i cannot be more satisfied with its performance. If you are looking for a rom that is stable, fast and capable of receiving calls, do not look further! This is by far the best rom i have tested...and i have almost tested every single rom out there regarding AKU2.2 and AKU2.3 by Jester and LvsW...

Hi there,
I've not yet tested your updaten just installed.
Your boot screen scares me ! !
illanz

hi Jesterz! my phone is g4 cid locked, and has a dutch version of windows mobile. can i upgrade it with your rom?
tomas

jester cooked Rom
first jester, greetings, one hell of a job.
i tested your rom on Pro application (i develop security solutions and now i enter the Xda applications) and remote video takes lots of resources , but your ROM deal with it the best. no clogging gagging what so ever.
how ever i have a question: is it possible from you to allocate more memorey
for running programs and less for storage, or there is physicale barricade?
thanks for your replay

xmanmaster: yes, there is a phsical limitation because of WM5. Programs & data are stored in internal flash memory (on the remaining of the 128MB ROM after the windows installation). The RAM is 64MB and the free amount remaining does not depends on the ROM used, unless the cooker plays with the pool size. Standard pool size of 12MB leaves about 24MB free, 8MB pool size leaves 28MB accordingly.
jester: Tried standard release with 12MB pool since 2 days and today i'm trying 8MB beta version. The only issue which surprised me in these 2 versions is that RESCO KEYBOARD doesn't want to become default input method anymore. Registry key doesn't change and if i force manually, Prophet doesn't boot, ending to hard-reset. That was ot the case with previous Qtek 2.09 ROM, imate 2.13 ROM and Dopod 2.15 ROM. Do you have a comment on this?
I did not yet notice any visible gain over Dopod ROM but maybe time will show.
By the way the boot image is very cool and won't change it. I would srongly welcome ALIEN as well.

CID Locked or not
Can anyone tell me how come I can find my O2 Xda Neo G4, is CID locked or not???
Also can I load this ROM, regardless it is CID locked or not?
Sorry for such basic Q's...

MMS Missing
Hi Jesterz, I have a XDA Neo. I had uploaded yr Beta version which worked fine. Today I have uploaded the latest version r1.
Have not checked everything but i fidn that in messages switch accounts option MMS in missing.
can u help ??
thanks in anticipation

Jesterz said:
The Black HTC Logo's
This will ONLY replace both Splash Screens, it will NOT install or change anything else !
1. The White HTC logo will be replaced by a black image (nothing on it)
2. The Second Splash Screen will be replaced by a nice HTC Logo.
Download Here
Again, just download and run the file.
Click to expand...
Click to collapse
This Logo File Replacer works on other ROMs?
Thanks
/FiShBuRn

What can i do with my Kaiser?

hello to all of you.
first of all, as everyone, i want to thank everyone who is working hard to make our phones more interesting...
i have a TYTN II - Kaiser
windows mobile 6 professional build 5.2.1620
Rom Version 1.56.405.5
Radio Version 1.27.12.11
Protocol Version 22.45.88.07H (if it's even relevent)
i want to first of all if is there any fix for the bad sound on BT?
is there an update to windows mobile 6.1 and what is the difference? i didn't find an update to my rom version...
doe's WM 6.1 fixes the BT bad quality?
and now, i want to know what can i do to make my kaiser more intersting and fun.
please write me everything that come's in mind.
Thank You very much!!!

tlccksww said:
hello to all of you.
first of all, as everyone, i want to thank everyone who is working hard to make our phones more interesting...
i have a TYTN II - Kaiser
windows mobile 6 professional build 5.2.1620
Rom Version 1.56.405.5
Radio Version 1.27.12.11
Protocol Version 22.45.88.07H (if it's even relevent)
i want to first of all if is there any fix for the bad sound on BT?
is there an update to windows mobile 6.1 and what is the difference? i didn't find an update to my rom version...
doe's WM 6.1 fixes the BT bad quality?
and now, i want to know what can i do to make my kaiser more intersting and fun.
please write me everything that come's in mind.
Thank You very much!!!
Click to expand...
Click to collapse
It's ok guys I got this one.
http://www.google.com/advanced_search?hl=en

alltheway said:
It's ok guys I got this one.
http://www.google.com/advanced_search?hl=en
Click to expand...
Click to collapse
LOLz.
You need to do nothing, just send me your phone.

i know it's quite a big question but it would be nice to get some ideas.
things you tried and happy with it.
and an advice about the WM 6.1...
thanx

he's already told you what to do. Anyway, here is another hint, read the stickies & wiki.

tlccksww said:
i know it's quite a big question but it would be nice to get some ideas.
things you tried and happy with it.
and an advice about the WM 6.1...
thanx
Click to expand...
Click to collapse
It is a big question, but all your questions are answered in this huge forum already, so you have to go and do some reading and searching for yourself and you will find all your answers, plus more and you will learn a lot. You will see what people said about 6.1 and you will see waht people said about BT just by reading other threads.

Dude, theres official BT fix to download from the HTC: (Bluetooth Hot Fix (for HTC TyTN II) )
http://rapidshare.com/files/77706792/Kai06492.CAB.html
When it comes to "what You can do with You device" the limit is the limit of Your imagination. The people at xda-developer is doing magic, but please use the wiki's and the search function like:
http://wiki.xda-developers.com/
From this wiki You select the device of Your interest (Kaiser) http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Now You have the world in front of You: Reviews, Discussions, Hacks and tweaks, ROM upgarding etc.

tlccksww said:
hello to all of you.
i want to know what can i do to make my kaiser more intersting and fun.
please write me everything that come's in mind.
Click to expand...
Click to collapse
1. the vibrate function can provide you hours of enjoyment, with proper placement (external or internal, your choice)
2. install as many programs as possible, filling up both main memory and storage card, using them once or twice then never use them again. after flashing a new rom, install a new assortment of software you probably don't need.
3. re-encode your favourite pr0n to ppc scaling and impress your friends with today's pocket pr0n.
4. port over wm5 from the wizard (blinding speeds, you won't be sorry)
5. read ALL the stickies in Kaiser upgrading area of forum (this isn't near as fun as the other suggestions, but you'll be able to answer your own questions, and be comfortable in the knowledge that you can hack your phone "without any help")
1 and 3 make a nice combo too!

Yes there is a WM6.1 upgrade, i am using Shaps at the moment and it seems to work fine for me.
WM6.1 doesnt give you a huge amount new, Shaps 6.1 rom for me has been stable and quick, i dont tend to install much on my phones though other than the included stuff. I do a few bits and install TomTom. 6.1 has threaded sms which is nice but has some annoying little issues, like i cant seem to find a way to forward sms messages any more. bit annoying.
Flicking through some of the other forums people seemed to be muttering about not being able to sync there 6.1 phones with ex2003, i use ex2007 though so i cant comment, mine works fine.
Havent noticed any bad sound quality over bluetooth. Be more specific though, do you mean stereo bluetooth or just normal.
I use the htc home plugin looks nice and works well.
Hope i have helped.
Rob
ps. Remember before you rush out and start flashing roms, read the wiki and things. You have to do stuff like hard spl and things first.
If i were you i would do it in this order.
1. hard spl
2. sim unlock (if needed)
3. wm 6.1 rom
4. radio rom

zetajunkie said:
1. the vibrate function can provide you hours of enjoyment, with proper placement (external or internal, your choice)
2. install as many programs as possible, filling up both main memory and storage card, using them once or twice then never use them again. after flashing a new rom, install a new assortment of software you probably don't need.
3. re-encode your favourite pr0n to ppc scaling and impress your friends with today's pocket pr0n.
4. port over wm5 from the wizard (blinding speeds, you won't be sorry)
5. read ALL the stickies in Kaiser upgrading area of forum (this isn't near as fun as the other suggestions, but you'll be able to answer your own questions, and be comfortable in the knowledge that you can hack your phone "without any help")
1 and 3 make a nice combo too!
Click to expand...
Click to collapse
You are one sick and twisted individual and I like it.

Start with the beginning of the internet at www.www.com and read through the entire thing.

I like to turn on wifi, 3g, gps, and bluetooth and use my kaiser to keep my coffee warm.

Help with upgrading my K-JAM to WM6 & picking a ROM, etc.

Hey all, I hope you'll go easy on me as this is the first time I've ever flashed a WM device and the prospect of going wrong has caused me to post here! If anyone could talk me through this I'd be most greatful.
First off thanks for the guide which I've been studying for the best part of the day! I now think I'm ready to give it a try.
I have an i-mate K-JAM with an IPL/SPL of 2.16 which I assume means I have a G3.
I hope I've got it right...
I assume I'll need to downgrade using the Button rom to 1.05 then use Lokiwiz to perform a CID unlock (dunno if my device is CID locked or not, I'll just guess that it is).
Next step will be to upgrade to this T-Mobile ROM and then upgrade to IPL/SPL 3.08 to make the device boot faster.
Now it's time to flash with a WM6 rom right?! .
I'm a little wary of the huge variety of ROMs available. I realise I can't ask 'what's the best ROM' which is fine but I'd like to know which roms people would recommend for maintaining the same functionality of the original WM5 rom that came with my K-JAM, give me the ability to make VoIP calls (I have a voipcheap sip account) and be rather speedy.
I've heard good things about the TNT ROM which appears to have the above things I need. I assume this is the ROM I'll need - I think I'd prefer to add apps seperately so I guess it's best to go with the 'Official' version over 'Professional'.
About VoIP - I've seen people have been having issues with the other persons sound coming from the loudspeaker, has this issue been sorted now?
Let's say I decide to go back to WM5 (for whatever reason) at a later stage, I assume this'll still be possible by following the exact same downgrade/upgrade steps in the guide?
I hope I'm on the right path. Thanks to anyone who can help out!

HAY
I UPDATE MY K-JAM WITH TNT WM 6.1 TOUCHFLO ROM IT WORKING FINE
LINK.
http://forum.xda-developers.com/showthread.php?t=367534

fayizk1 said:
HAY
I UPDATE MY K-JAM WITH TNT WM 6.1 TOUCHFLO ROM IT WORKING FINE
LINK.
http://forum.xda-developers.com/showthread.php?t=367534
Click to expand...
Click to collapse
Cheers, did you follow the same kinda procedure in my post? Have you messed with VoIP at all, if so how's it working for you?
Is WM6 running a lot smoother than WM5?

All done!
Just have one last question for now here

SMS92 said:
All done!
Just have one last question for now here
Click to expand...
Click to collapse
Sorry, I've tuned into your question late. If it helps, I'm using mfrazz's XM6r3 ROM (I tried a more recent one that was buggier and went back to 3.) VoIP (Internet Calling) worked "right out of the box"- I just had to load one of the VoIP configuration utilities floating around here to enter my provider settings.
The only two issues really are that it uses the loadspeaker instead of the earspeaker (but bluetooth works fine) and the biggest issue- the Wizard is just too d**m slow for Internet Calling to work well- the audio is very choppy without overclocking (which I'm loathe to do.)
Fring, from Fring.com is a decent app for VoIP on slow WM phones like the Wizard, so I have that installed as well. It lets you use Skype, Google Talk, and a few other VoIPs as well as one SIP provider all in one app. It's not perfect either- it also uses the loudspeakers, it's akward to dial from (it has no real "dial pad"- you can either dial an existing contact by selecting one, or another number by selecting any contact and "overriding" their displayed number), it doesn't support DTMF (so there's no way to "press 1 for English...") and it always leaves the device volume at full blast when you exit the app, but it's got the best audio quality of any VoIP app I've used on the Wizard. (I used it from Mexico back in January over my hotel's WiFi to make $0.02/minute calls back to the States rather than T-Mobile's generous $1.49/min roam rate!)

O2 Xda Exec: upgrade to WM6.1

Good morning all,
I'm a very new member, and I'm looking to upgrade my device to WM6.1.
Details of my device:
O2 Xda Exec, Monthly Contract O2 SIM, WM5.0, OS 5.1.1.1700 (Build 14354.0.1.1), Processor PXA270-520MHz, Memory 49.96MB.
I'm a writer and use Word, Notes (including recordings), Active Sync (Vista Laptop with Windows Mobile Device Centre, email (hotmail and ntl), phone, texting, camera--I think that's all.
My biggest problems with 5.0 are that I can't edit Word 2007 documents (.docx) and can't use SDHC cards. So really, I want a basic (vanilla?) version that behaves pretty well like the proprietory product. I'm not really too interested in lots of additional apps.
Bearing in mind that I'm very much a user, I'd be very grateful if somebody could advise me as to a ROM that's:
a) stable;
b) easy to install;
c) has all the features of 6.1; and finally
d) not too many whizz-bangs.
I appreciate that a lot of time, effort and expense goes into producing the ROMs--so I'm prepared to make a comensurate donation.
Cheers,
Plantaen.

I think Tomal 8.2 will do for you. Its the most stable and fast ROM I have come accross. Another new version from TOmal is in Beta 2 stage. May be you can upgrade to that as well once the final version released.

Read Wiki
Would first advise you to go through Wiki and understand what you are trying to do and find whether your Universal (O2 XDA Exec) is fully unlocked etc.,
Read as much as you can in Wiki as it helps to prevent future messup as anything going wrong could end up your Uni just a costly paper weight.
Tomal's ROMs are great and once you are sure that your phone is fullly unlocked in all respects, you can try any flavour starting from 7.7 through 8.5
Hope this helps.
Regards

I would recommend Tomal's Vanilla version: http://vidmes.com/xda/Uni/ROMs/Tomal...960_VANILA.exe. Give that a try and see how you like it.

plantaen said:
Good morning all,
I'm a very new member, and I'm looking to upgrade my device to WM6.1.
Details of my device:
O2 Xda Exec, Monthly Contract O2 SIM, WM5.0, OS 5.1.1.1700 (Build 14354.0.1.1), Processor PXA270-520MHz, Memory 49.96MB.
I'm a writer and use Word, Notes (including recordings), Active Sync (Vista Laptop with Windows Mobile Device Centre, email (hotmail and ntl), phone, texting, camera--I think that's all.
My biggest problems with 5.0 are that I can't edit Word 2007 documents (.docx) and can't use SDHC cards. So really, I want a basic (vanilla?) version that behaves pretty well like the proprietory product. I'm not really too interested in lots of additional apps.
Bearing in mind that I'm very much a user, I'd be very grateful if somebody could advise me as to a ROM that's:
a) stable;
b) easy to install;
c) has all the features of 6.1; and finally
d) not too many whizz-bangs.
I appreciate that a lot of time, effort and expense goes into producing the ROMs--so I'm prepared to make a comensurate donation.
Cheers,
Plantaen.
Click to expand...
Click to collapse
Welcome to the forum
I personally recommend Tomal ROM´s specially v7.6
Please READ the Wiki
Good luck,

http://vidmes.com/xda/Uni/ROMs/Tomal...960_VANILA.exe. Nothing is found in this link. Is there any alternative link avail.

Plz help
I like to upgarde my o2 xda exec frm wm5 to wm6.1. I like to download Tomal 8.2 from :http://vidmes.com/xda/Uni/ROMs/Tomal...960_VANILA.exe." But file is missing. Is there any alternate link to download this file?

Here poperly link:
http://vidmes.com/xda/Uni/ROMs/Tomal/TML_v82_WM61_19960_VANILA.exe

Thank you!
I'm sorry this reply's a little delayed--more trouble with IE, so I finally bit the bullet and downloaded Firefox.
I've read all the helpful advice, particularly regarding Wiki, and then make my mind up.
Cheers,
Ian.

Thanks You!
For the link. I could download perfectly

plantaen said:
Good morning all,
I'm a very new member, and I'm looking to upgrade my device to WM6.1.
Details of my device:
O2 Xda Exec, Monthly Contract O2 SIM, WM5.0, OS 5.1.1.1700 (Build 14354.0.1.1), Processor PXA270-520MHz, Memory 49.96MB.
I'm a writer and use Word, Notes (including recordings), Active Sync (Vista Laptop with Windows Mobile Device Centre, email (hotmail and ntl), phone, texting, camera--I think that's all.
My biggest problems with 5.0 are that I can't edit Word 2007 documents (.docx) and can't use SDHC cards. So really, I want a basic (vanilla?) version that behaves pretty well like the proprietory product. I'm not really too interested in lots of additional apps.
Bearing in mind that I'm very much a user, I'd be very grateful if somebody could advise me as to a ROM that's:
a) stable;
b) easy to install;
c) has all the features of 6.1; and finally
d) not too many whizz-bangs.
I appreciate that a lot of time, effort and expense goes into producing the ROMs--so I'm prepared to make a comensurate donation.
Cheers,
Plantaen.
Click to expand...
Click to collapse
if you look for serious word editing, I would suggest you to use the softmaker http://www.softmaker.com/english/
Regarding a ROM.. I would suggest Tomal V 7.6 or 7.7. my personal favoured is V7.7.
Anyhow before doing something on the rom read carefully and bring you up to speed. I heart upgrade on Vista cn be tricky so you need to find info and make sure you have at least bootlaoder > v1

Maybe U don't need to upgrade your ROM
Hi, Plantaen.
I think maybe U don't need too upgrade Ur ROM, U can try these :
1. file : PsiDocSDHC.cab, so U can read Ur SDHC Card In Ur Uni in ROM WM 5, like I do. U can search this file in this ROM.
2. I think U can save as Ur document in doc format, rather than docx format.
Hope this helps.
Cheers.

good link
pinelesss said:
Here poperly link:
http://vidmes.com/xda/Uni/ROMs/Tomal/TML_v82_WM61_19960_VANILA.exe
Click to expand...
Click to collapse
Thanks for the link...

After running the exe and upgrading, my XDA fails to respond
Hi, i used the "http://vidmes.com/xda/Uni/ROMs/Tomal/TML_v82_WM61_19960_VANILA.exe" to upgrade my XDA Executive and after the upgrade was over it asked me to soft reset my device, i did that and the screen displays Press '0' to restore factory settings or 'X' to cancel. the device is non responsive after that, pressing '0' or 'x' just exits and the device doesn't reboot. How can i now use my device? Please help.

Arif Nasim said:
Hi, i used the "http://vidmes.com/xda/Uni/ROMs/Tomal/TML_v82_WM61_19960_VANILA.exe" to upgrade my XDA Executive and after the upgrade was over it asked me to soft reset my device, i did that and the screen displays Press '0' to restore factory settings or 'X' to cancel. the device is non responsive after that, pressing '0' or 'x' just exits and the device doesn't reboot. How can i now use my device? Please help.
Click to expand...
Click to collapse
Welcome to forums
Have you tried to reflash?
If so and did not worked, try to do a Doc format
Instructions in the Wiki
Good luck,

if you've got an SD card in it, remove that and try again

anychance of a new link..i know i'm like two years late :s

DANQUAHSTUDIOZ said:
anychance of a new link..i know i'm like two years late :s
Click to expand...
Click to collapse
you're lucky, I 've seen that ROM in http://www.mediafire.com/?ix0z22bttv9

WM6.1 BETA TEST 3 By SiliX and Strik3r for hp ipaq 512 514

Well Folks it Look Like it couldn't be done but now thanks to SiliX and Strik3r its Finnaly Arrived check it out here http://www.hp-club.ru/forum/viewtopic.php?f=11&t=334
Direct ifolder Download
4Non RussiAn Users check how to download from ifolder

At Last...big ups for SiliX and Strik3r!
It will be good if somebody upload the file somewhere outside Russia because the traffic is exceeded...

I don't know them. Will it be for all smartphone ? Exclaibur compatible ?
What are the changes on this ROM ? Where can we get pics ?

defcomg, add to topic please - Update your device only from 2.05 RUSSIAN rom! (You can get it here). in other words:
1) Flash your devise with 2.05 Russian
2) Flash devise with our 6.1 beta
Final will be done in a week (i think)
Now i need one to test it and write - work/or not work. But careful.

Gprs and egde
well il be willing to try it but the lack of gprs well uhm i use it daily heck im using it to post this right now. could you please upload the next rom at megaftp or a static url or www.hotlinkfiles.com thanx its just that i use my phone to download and egde gets interupted sometimes

http://ifolder.ru/10941215
Try that. That is final version, without BTH and WiFi (Now they disabled)

i cant download it now stupid newtork down anyway thanx

Flash with 2.05 Rusian - OK
Flash with 6.1 final version - after flash I can't start device. Start proces is still on screen with logo and version (iPAQ 500 Series Voice Messenger 2.05.00 0.76)
EDIT: Master Reset fixed it...

nadidlo, thanks Did you find English localization in menu?

Yes, menu and somethings are in english. Some program are in Rusian, but no problem. Good work.
I had problem with PIN, I pressed some many buttons on device. After that i chose English and PIN and everything work corectly.
btw:sry my english, it isn't ok

nadidlo, my english is worse, so thats nothing
Can you tell me that programs are in Russian? (I'm dont interesting in start menu shorcuts).

hi Strik3r, i install WM6 and work find in english ( i'm italian) ,but i would like if you put Windows Live Messenger and the original File Explorer can you do it?

More instant acces to Camera functions and set instensity backlight on display could by useful.
It is possible than after upgrade with WM 6.1 is battery fast discharged?
Is there any way how can i change text color on homescreen? And can I organize items on homescreen? Somethings are uselessly for me.

In rusian are this program:
In start - Internet folder, software for sharing internet and opera mini
In file manager - button for new folder is in rusian.
Game ?emulator? Sega
In Accesories- Sim* and Settings (icon for wifi and phone, regedit, Mobile ntp client)
*.... i don't know what meaning this rusian text

Strik3r, i think that bluetooth don't go...

nikola360, bluetooth and wi-fi removed...
nadidlo, thanks
It is possible than after upgrade with WM 6.1 is battery fast discharged?
Click to expand...
Click to collapse
No, that cant be so...

bluetooth so there is no possibility to make it work?
WiFi works well, i also navigate

Leave other more updated ROM?

Hey Could Someone Upload the wm6.1 rom and the russian rom to a non Ftp Static Links, Reason is Internet Cost here in S.A are off the charts no jokes so iv manage to get free internet nomally no matter what i typed id get redirected to a url that tells me i must recharge my sim with credit i managed to bypass that by using the taget site ip as my proxy and typing in the url of the redirection and it takes me not to the recharge site but the target ip url now most sites bring up apache succes page so im left with web proxy sites thats how im able to browse could someone upload it to eg www.megaleecher.com www.megaftp.com www.hotlinkfiles.com thanks

RapidShare Link
Zshare Link
Bandongo
Megaupload here is a mirror of the lastest lite rom wm6.1 for ipaq 5xx, thanks for the creators... flash first with RUssian rom, anyone who got it working ok??