Hi,
I've created another ROM for the Prophet
This is based on the Qtek 2.20 WWE ROM (thx mwiberg)
This is a very clean and stable ROM, it has the standard Qtek 2.20 WWE ROM, with the qtek links/images/junk taken out, and it has some patches in the ExtRom to enable MMS/GPRS/A2DP
This ROM will upgrade your SPL to 2.20.000
This ROM will upgrade your Radio to 02.47.21
This ROM will upgrade your OS to the Original Qtek AKU 2.2 OS (2.20.7.34 WWE)
This ROM contains my own version of the Qtek ExtRom (2.20.7.114)
This ROM has a patched installer, so it will not check your CID
This ROM has both splash screens changed (the white HTC one and the next one with the IPL and SPL info)
This ROM has a standard page pool of 12MB
My ExtRom:
A2DP_Cert_Signed.cab = Certificate to install the A2DP patch
A2DP_Patch.cab = A2DP Patch
AutoRun.exe = Needed to start the ExtRom Installation
Cert_SPCS.CAB = Certificate for SPCS
Config.txt = config file for the ExtRom
MP-Shorcut-MMS1-Java5xx-CyberonVoice-CV-04Nov05.CAB = Voice Speed Dailer
MP_Customization_Prophet_Qtek_WWE_051205.CAB = Various Prophet/MMS/HTC registry setting
MP_CVSDcpl_20060220.cab = Voice Tag installer
MP_mHub_WWE_060124-2.CAB = WWE language
MP_MMSAutoDisconnect_060106.CAB = MMS Auto Disconnect Patch (stops GPRS after getting MMS)
MP_MMS_Patch.CAB = MMS Setttings
MP_SmartDialing_enable_0915_signed.CAB = Enable Smart Dialing
PP_DisconnectButton_16.CAB = GRPS Disconnect button
PP_ExtVersion.CAB = Set Ext Rom Version
PP_OperatorName.CAB = Populate the Operator Names Database
PP_Prophet-UAProf_AKU2.sa.CAB = registry setting for HTC prophet
prophet_a2dp.cab = A2DP Stereo Patch
P_ECall_112_911_QTEK_Wizard.cab = Set 112 and 911 as emergence numbers
P_PT_EnableSPN_Wizard_20060109.CAB = Enable download of Operator name (OTA)
Just download, run the file and after the upgrade is done, hard reset your Prophet (hold down both the camera and comm manager buttons on the side while pressing the reset button, hold the two buttons untill the screen comes up, then press the left green phone button)
Enjoy !
This is ONLY for G3
download G3 here
This is ONLY for G4
download G4 here
And yes, before you ask, I will release a splash screen updater for the people who don't like my Jester Splash Screen (Shame on you ! )
The Black HTC Logo's
This will ONLY replace both Splash Screens, it will NOT install or change anything else !
1. The White HTC logo will be replaced by a black image (nothing on it)
2. The Second Splash Screen will be replaced by a nice HTC Logo.
Download Here
Again, just download and run the file.
Thanks jester, another fine release im sure.
How does this differ to the b1 of the same description? Just want to know so i can decide if to go from the b1 to the r1
dannyoneill said:
Thanks jester, another fine release im sure.
How does this differ to the b1 of the same description? Just want to know so i can decide if to go from the b1 to the r1
Click to expand...
Click to collapse
go for this release, the other one is a beta, this is the release version
I contains some patches that were not in the beta (mainly MMS/grps/ad2p patches that didnt work correctly)
Jesterz,
After trying lsvw's roms, you finally came out of beta, so i am ready to try your rom.
My question is does your rom have the latest (8 button) comm manager, Sim manager and HTC's task manager? (lsvw's aku2.3 has that, which is useful for me, so i don't have to install extra-ware).
secondly, does do these two cabs do? PP_OperatorName.CAB and P_PT_EnableSPN_Wizard_20060109.CAB. I know you put in a short description, but what exactly does populate operator name do? and what exactly does download operator name do?
lastly, Does your rom have those so called "optimized" registry settings? such as increasing file cachse, disable animation, blah blah. Basically i'm asking if your rom is just a CLEAN rom or CLEAN and OPTIMIZED rom.
finally, there seemed to be flavors of 8 mb pp size and 12 pp size. based on your expertise, is having bigger pp size faster? lsvw claims his 8 mb pp is faster, which confuses me and seems to contradict definition of pool size :S
i've been following your work closely, so thanks for all your work, and dedication. i am diligently waiting for your aku3.3 results
Jesterz,
I have been using LSVWs 2.3 ROM and found it very stable, but not stable enough to not want to try this one
So I just installed this ROM on my G4 M600 and first impressions were great, very clean but also very very fast (interestingly I had used the 8MB page ROM as advised on other threads for the LSVW install???)
However I've hit a big problem, for me anyway. On registering my iTechS38 headset it correctly reports the device to have both "Hands Free" and "Wireless Stereo" services. Ensuring both these are checked I'm disappointed to find A2DP doesn't then work (Windows Media Player, Mort Player etc). In addition on returning to the Bluetooth configuration and holding on the iTechS38 entry I'm only offered to "Set as Hands-free" no "Set as Wireless Stereo" as I was previously offered with LSVWs 2.3 ROM. Editing the entry and both services are shown and are checked.
In an effort to check I hadn't just forgotten some basic step I reflashed my device with LSVWs new 2.3.1 ROM. Once again I was immediately able to add my iTechS38 and start listening to music.
Now that I've seen how clean and FAST your ROM is (along with other peoples comments on stability) I'm very keen to get it running with A2DP. Given the very prominent A2DP modules (which I saw being installed) and refinement comments for the R1 release am I just missing something really simple something here?
Can anyone else out there confirm they have A2DP working, ideally with an iTechS38 headset?
Thanks in advance
Jeff
PS I'm more than happy to have your artwork appear on each reset (it still does following LSVWs 2.3.1 update!) in my eyes it's the least acknowledgement we owe to you for all your efforts. I await your AKU 3.3 release with anticipation and would be happy if the only significant improvement was a resolution of the A2DP quality issues.
Jesterz said:
The Black HTC Logo's
This will ONLY replace both Splash Screens, it will NOT install or change anything else !
1. The White HTC logo will be replaced by a black image (nothing on it)
2. The Second Splash Screen will be replaced by a nice HTC Logo.
Download Here
Again, just download and run the file.
Click to expand...
Click to collapse
If you install this new logos, do you have to hard reset you device? i didnt understand exactly.
Thank you!!!
no, just run the logo update and thats it, it only flashes the parts of the rom which holds the pics.
dobbing said:
Jesterz,
I have been using LSVWs 2.3 ROM and found it very stable, but not stable enough to not want to try this one
So I just installed this ROM on my G4 M600 and first impressions were great, very clean but also very very fast (interestingly I had used the 8MB page ROM as advised on other threads for the LSVW install???)
However I've hit a big problem, for me anyway. On registering my iTechS38 headset it correctly reports the device to have both "Hands Free" and "Wireless Stereo" services. Ensuring both these are checked I'm disappointed to find A2DP doesn't then work (Windows Media Player, Mort Player etc). In addition on returning to the Bluetooth configuration and holding on the iTechS38 entry I'm only offered to "Set as Hands-free" no "Set as Wireless Stereo" as I was previously offered with LSVWs 2.3 ROM. Editing the entry and both services are shown and are checked.
In an effort to check I hadn't just forgotten some basic step I reflashed my device with LSVWs new 2.3.1 ROM. Once again I was immediately able to add my iTechS38 and start listening to music.
Now that I've seen how clean and FAST your ROM is (along with other peoples comments on stability) I'm very keen to get it running with A2DP. Given the very prominent A2DP modules (which I saw being installed) and refinement comments for the R1 release am I just missing something really simple something here?
Can anyone else out there confirm they have A2DP working, ideally with an iTechS38 headset?
Thanks in advance
Jeff
PS I'm more than happy to have your artwork appear on each reset (it still does following LSVWs 2.3.1 update!) in my eyes it's the least acknowledgement we owe to you for all your efforts. I await your AKU 3.3 release with anticipation and would be happy if the only significant improvement was a resolution of the A2DP quality issues.
Click to expand...
Click to collapse
I will have a look at this, mind you, I don't have a headset like yours so it's hard to test, also I don't want to "mess around" too much with these patches as I want to keep things stable and in their original AKU 2.2 state as much as possbile
for the other people, no this does NOT contain the "new" comm manager (which is WAY to slow and unstable if you ask me) or the task manager (as that is an AKU 3 feature) I don't want to mix AKU features with this release as I want at least this release to be stable and as close to AKU 2.2 and as clean as possible.
buggybug0 said:
Jesterz,
secondly, does do these two cabs do? PP_OperatorName.CAB and P_PT_EnableSPN_Wizard_20060109.CAB. I know you put in a short description, but what exactly does populate operator name do? and what exactly does download operator name do?
lastly, Does your rom have those so called "optimized" registry settings? such as increasing file cachse, disable animation, blah blah. Basically i'm asking if your rom is just a CLEAN rom or CLEAN and OPTIMIZED rom.
finally, there seemed to be flavors of 8 mb pp size and 12 pp size. based on your expertise, is having bigger pp size faster? lsvw claims his 8 mb pp is faster, which confuses me and seems to contradict definition of pool size :S
i've been following your work closely, so thanks for all your work, and dedication. i am diligently waiting for your aku3.3 results
Click to expand...
Click to collapse
the cabs, the first just puts two operator names in the registry (telecom operator names, like Orange,KNP etc) to create the entries as they are not there to begin with
the second cab enable OTA reading of the operator name (it will read the name of the telecom operator that is being transmitted from the GSM tower) and it will update the previous entry with the correct name
This ROM is clean, i didn't add the optimize reg setting you describe, you are welcome to do so on your own
the standard page pool is 12 mb, you would think the bigger to PP the better, however, if you decrease the pp to 8 mb the OS will have more memory available for programs, which might speed up your prophet, so it depends which software you run.
I believe the 8mb is a little faster, however it's not much.
hi Jesterz. My phone is O2 Neo with no CID Unlock. Can i upgrade my phone to your rom ??
Thanks for your answer !!
FYI, i have installed this rom for a week now...and i cannot be more satisfied with its performance. If you are looking for a rom that is stable, fast and capable of receiving calls, do not look further! This is by far the best rom i have tested...and i have almost tested every single rom out there regarding AKU2.2 and AKU2.3 by Jester and LvsW...
Hi there,
I've not yet tested your updaten just installed.
Your boot screen scares me ! !
illanz
hi Jesterz! my phone is g4 cid locked, and has a dutch version of windows mobile. can i upgrade it with your rom?
tomas
jester cooked Rom
first jester, greetings, one hell of a job.
i tested your rom on Pro application (i develop security solutions and now i enter the Xda applications) and remote video takes lots of resources , but your ROM deal with it the best. no clogging gagging what so ever.
how ever i have a question: is it possible from you to allocate more memorey
for running programs and less for storage, or there is physicale barricade?
thanks for your replay
xmanmaster: yes, there is a phsical limitation because of WM5. Programs & data are stored in internal flash memory (on the remaining of the 128MB ROM after the windows installation). The RAM is 64MB and the free amount remaining does not depends on the ROM used, unless the cooker plays with the pool size. Standard pool size of 12MB leaves about 24MB free, 8MB pool size leaves 28MB accordingly.
jester: Tried standard release with 12MB pool since 2 days and today i'm trying 8MB beta version. The only issue which surprised me in these 2 versions is that RESCO KEYBOARD doesn't want to become default input method anymore. Registry key doesn't change and if i force manually, Prophet doesn't boot, ending to hard-reset. That was ot the case with previous Qtek 2.09 ROM, imate 2.13 ROM and Dopod 2.15 ROM. Do you have a comment on this?
I did not yet notice any visible gain over Dopod ROM but maybe time will show.
By the way the boot image is very cool and won't change it. I would srongly welcome ALIEN as well.
CID Locked or not
Can anyone tell me how come I can find my O2 Xda Neo G4, is CID locked or not???
Also can I load this ROM, regardless it is CID locked or not?
Sorry for such basic Q's...
MMS Missing
Hi Jesterz, I have a XDA Neo. I had uploaded yr Beta version which worked fine. Today I have uploaded the latest version r1.
Have not checked everything but i fidn that in messages switch accounts option MMS in missing.
can u help ??
thanks in anticipation
Jesterz said:
The Black HTC Logo's
This will ONLY replace both Splash Screens, it will NOT install or change anything else !
1. The White HTC logo will be replaced by a black image (nothing on it)
2. The Second Splash Screen will be replaced by a nice HTC Logo.
Download Here
Again, just download and run the file.
Click to expand...
Click to collapse
This Logo File Replacer works on other ROMs?
Thanks
/FiShBuRn
Related
For my 1,000th post to XDA-Developers.com, I present to you:
Crossbow Reloaded v1.5
A Faria ROM Kitchen Production by mfrazzz
This version fixes issues that were found with the first release of Crossbow Reloaded, and adds new features. Just like with the first release, please remember that this ROM is a product of what _I_ wanted, so no complaints about why does this rom have this in it, or why didn't you put this in there. If you don't like how this rom is spiced, then go grab the Faria ROM Kitchen and make your own version. I am open to ideas on how to improve the rom (most of the changes in this version are direct results of ideas and comments posted in the original release thread).
Please Note: this ROM was NOT intended to push the limits on speed optimization or memory optimization. It was made to be functional and something that I myself wanted and will use. I've found it to perform at a better than acceptable level for myself, and so far Battery life seems just as good as any other WM6 ROM I've tried. If you have Battery Life issues, make sure you flashed back to an official rom before you upgraded to this one, as that will correct extended rom corruption that has been shown to cause battery draining. Also note that I've been running this version for about 24 hours and have not even used overclocking and found it to perform very nicely (so Overclocking should work very nicely).
What's Different in V1.5 from V1.0?
Removed Transcriber (actually this wasn't in v1.0 but I just want to make it clear its not here either) (Can be added back via CAB)
Removed VoIP (can be added back via CAB)
Removed Voice Command (Can be added back via CAB)
Removed HTC Zip (Pocket RAR does zip and works better IMO)
Removed PHM Registry Editor
Added SQLCE
SIM Manager upgraded to v6.1
HTC X-Button upgraded to v1.5 and now turned on by default
Added WM5NewMenu
Added SMSDRFix
Added DotFred's SoftKeyAppletEx
Added WiFiFoFum
Replaced Adobe Reader LE with PocketXpdf (smaller, lighter, and works as well in my tests. If you really want Adobe Reader LE it can be added back via CAB file)
Fixed Regional Settings to default to English (United States) and use a slash for the date seperator (M/dd/yyyy)
Menu sounds now work by default
Pressing the "End Call" button now does not disconnect GPRS but minimized the active application. Pressing and holding the "End Call" button for about 5 seconds will do a GPRS Disconnect
Internet access over ActiveSync (USB) connection works (You must apply a registry fix on your PC first. See the next post for the fix)
Added 3 themes (.tsk) and 3 Ringtones from what was in the 1.0 release
Base ROM Information
This is straight out of the Faria ROM Kitchen V2 so its a "fixed" version of Faria's "the real thing" release that was then made vanilla and that I've added packages back into, and changed/fixed/enhanced.
ROM Version: 2.18.0.0 WWE
ROM Date: 02/14/06
Protocol: 4.1.13.09
ExtROM version: Faria V5.0
There is no Radio, IPL, SPL or Extended ROM.
In addition to the changes mentioned above for what is different, here is a list of the other added apps that were also in the 1.0 release:
Notepad editor
Pocket RAR
HTC X-Button (turned on by default)
PIM Backup
Total Commander
GSFinder
MoDaCo NoData (so you can turn off data sources)
mUn Keyboard Skin
WM5torage 1.73
dotFred TaskManager (with registry editor link)
BatteryStatus 1.04.202 Beta 3 Build 0195 (There are newer versions out now, but I had issues with battery drain and other problems so kept the same version as in the original release as it seemed to work well)
Smartskey 0.56 (DPAD is set to 0 in the .ini so the up and down scrolling works in the Phone dialer as expected in WM6)
10 Button CommManager with Black theme
New welcomehead.96.png (3rd splash screen) to match first two splash screens of the rom
Requirements
You MUST have an IPL and SPL at 2.xx or higher (BOTH not just one or the other).
You MUST be running ActiveSync 4.5 on Windows XP (Vista comes with the correct sync utility, although there have been issues reported about Vista and sync'ing with PPC's so be aware of that).
Before you attempt to upgrade to this ROM, Please follow this thread to learn how to flash roms and CID unlock, and how to fix issues you may run into! It is also recommended that you flash your phone with a Windows XP computer and not Vista. It will work with Vista, but if you run into problems Vista can't talk to a phone in Bootloader mode!
http://forum.xda-developers.com/showthread.php?t=298613
Recomendations
I HIGHLY Recommend that you flash back to an official rom before upgrading to this (or any) custom rom so you have a clean base (and correct any Extended ROM corruption you might have). G4 users would flash back to their provider's latest official release. G3 can use T-Mobile 2.26 for a good base.
Use BatteryStatus (its included in the rom!) to overclock (I use 260MHz), and the CPUscaler settings in BatteryStatus to set a min of 143MHz and a Boost of 273MHz.
For Cingular users, I recommend you use the T-Mobile 2.19 UK Radio. Newer Radio versions tend to have missed calls and SMS messages (just like with all other WM6 ROMs). G4 users, see the next post on flashing the Splash screens for a tip if you get errors trying to flash the 2.19 Radio ROM.
Credits
I would like to thank the following in help (directly and indirectly) with Crossbow Reloaded v1.5:
Faria for providing both the base rom and the ROM Kitchen that I used to "cook" this ROM.
Funman for his fantastic PDF document on using the ROM Kitchen and for answering questions and fixing bugs in packages I hastily put together
ADB100 for finding and fixing some bugs in packages I worked on
Molski for having a nice tutorial on various cooking tools and providing easy access to info at http://www.molski.biz
Everyone that installed and gave feedback and support on the original Crossbow Reloaded version
Many others here at XDA-Developers.com that provided information, tips, and suggestions that I used when putting this together
While I'm releasing this, I fully realize this is really just a repackaging of the Faria Vanilla ROM that is included in Faria's ROM Kitchen. Other than a couple of slight modifications, I don't take credit for a full "cooking" (although this one is more customized than the first release). This is more like taking a pre-packaged dinner, and adding the spices and herbs that I wanted for my taste buds. Believe me, this was not that hard to do, and I did not spend the countless hours that full blown chefs spend in providing amazing base roms. So a HUGE thanks goes to the REAL chefs that support our community!
Known Issues
None!
Official Download Sites for Crossbow Reloaded v1.5
I'll update this list with mirrors as they become available
HTTP Download - Thanks chamelion
HTTP Download 2 and HTTP Download 3 - Thanks Eximius
RapidShare
Also seeded on ThePirateBay for Torrent users.
.
Extra Cabs and Apps
Voice Command
MS Voice Command 1.6 US HERE and HERE and HERE
MS Voice Command 1.6 German HERE and HERE and HERE
MS Voice Command 1.6 FR HERE and HERE and HERE
MS Voice Command 1.5 UK HERE and HERE
Transcriber, VoIP, Adobe Reader LE, and more
The Black 3 Add-on CABs file has installable cabs for Transcriber, VoIP, Adobe Reader LE, and Windows Live & Messanger (slightly newer version than in Crossbow Reloaded v1.5). I've tested all of these on my Wizard and they work fine. Also included in this file is Cyberon VoiceCommander, Cyberon Voice Dial, VIjay555 utils, and a Slingbox patch (none of these I've tested).
NOTE: To fully setup VoIP, after installing the CAB from the above link, you also need to follow the steps found here:
http://forum.xda-developers.com/showthread.php?t=299950. ALso you can download the SIP Config Tool to setup VoIP (thanks bogdatov for pointing me to this thread!)
GPRS / MMS Setups
Attached to this post is the cab file for Cingular users to setup GPRS and MMS.
For T-Mobile US users, here's a link to a post by FZZF that has info for your setup of GPRS and MMS:
http://forum.xda-developers.com/showpost.php?p=1250747&postcount=408
MMS auto config t-mobile.cab (Thanks to marscandybars for posting this)
German users check HERE
Greek users, Tna posted a cab for Greek Operators, or check HERE
Connecting WM6 to the Internet via ActiveSync 4.5 on Windows XP
For those having issues connecting to the internet via Active Sync, cut and paste this code onto your PC in a file called net_over_activesync.reg and run it (on your PC not your phone)
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Splash Screens and Splash Only RUU for G4
For G4 users, I've attached a zip file with the Splash Screens of this rom (since you don't get them when you use the shell tool). As I understand it, this is completely safe for a G4 as its nothing but splash screens (no OS, IPL, SPL, Extended ROM, etc, just splash and htc logo screens). I've also placed the .bmp files that make up the splash screen in the zip file so you can see them directly before flashing this. Before anyone asks, yes, the htc logo one is grainy. I had to do that due to size limitations of the file. I tried for a couple of hours to get a nicer version to work but it wouldn't display correctly (seems to have to be pretty low res / non-complex)
If you have problems flashing the above RUU on a G4, then extract this http://forum.xda-developers.com/attachment.php?attachmentid=29158&d=1152698784 and pull the nk.nbf file out of the above Splash Screen file and put it into the directory of this one and run this RUU. You can use the same method for flashing the Radio Only ROM (pull the nk.nbf file out of the radio only rom and put it into the directory of this RUU and run it). Thanks anichillus for that link!
Weather Panel Setup
See my post in the Wizard forum on how I setup WeatherPanel. It will give you a fixed dll with correct moon phases through 2008, new/better Moon phase icons, and a cool theme called Chameleon-240 QVGA. I dumped SBSH Pocket Weather after seeing this setup
.
Reserved for future use
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
RIght on Right on!
Holy [email protected]! I just loaded the older version now this...LOL. I guess I'm gonna have to reflash again.
<Another one of your admirers>
Flashing this ROM doesn't work with Vista while T-Mobile's Original ROM just works fine..... It gives an MFC error,neither yours nor Core 2.0 works with Vista...am I missing something?
hooray...?
i just got the last version all customified, now i gotta flash the new one!!
keep up the great work!
All installed nicely. This ROM appears very quick and comprehensive enough for me. Thank you mfrazz.
I had to be quick to stop all the T-mobile extended rom installing, after following your advice and sticking a stock ROM on 1st. Funny thing is though ExtROM is listed as faria V5.0 but it definately contains stock T-mobile cabs etc.
Thanks once again
MMS included?
Hey mfrazzz - did you include all of the Cingular network settings? Figured I'd ask ya, since you were going for a "complete" rom.
mattk_r said:
Hey mfrazzz - did you include all of the Cingular network settings? Figured I'd ask ya, since you were going for a "complete" rom.
Click to expand...
Click to collapse
I didn't check before I installed the Cingular CAB, but I don't think so - it may not make T-Mobile users very happy!
mattk_r said:
Hey mfrazzz - did you include all of the Cingular network settings? Figured I'd ask ya, since you were going for a "complete" rom.
Click to expand...
Click to collapse
Nope, its service provider generic. I just updated the 2nd post with lots of add ons (Cingular and T-Mo US settings have info there).
BTW: Unless there is some huge issue, I think this will be it for Crossbow Reloaded, until the new Faria ROM Kitchen V3 comes out. This one has felt really solid to me (at least for what I use my phone for. I'm sure others out there will find stuff I missed in areas I don't touch ).
kkiran said:
Flashing this ROM doesn't work with Vista while T-Mobile's Original ROM just works fine..... It gives an MFC error,neither yours nor Core 2.0 works with Vista...am I missing something?
Click to expand...
Click to collapse
Sorry, I don't have Vista and have no experience with it. There are threads around here where people have discussed issues (and fixes) for installing roms via Vista.
b.mann said:
i just got the last version all customified, now i gotta flash the new one!!
Click to expand...
Click to collapse
Yeah, pretty much the same with me. Just had the V1.0 version really humming and started work on putting together all of the fixes and changes I wanted to do to make this one. I've flashed more in the last 3 or 4 days than I think I've flashed since getting addicted in January.
wizzzard said:
I had to be quick to stop all the T-mobile extended rom installing, after following your advice and sticking a stock ROM on 1st. Funny thing is though ExtROM is listed as faria V5.0 but it definately contains stock T-mobile cabs etc.
Click to expand...
Click to collapse
Yeah, I abort the T-Mo extended rom running too (and you do have to be quick). Yeah, the Faria "Extended ROM' is really in the \Windows area (as I understand it) and not really a true extended rom (at least when I cook this I'm not putting anything in the extended rom). So yes, its expected you will see the official rom's cab files still sitting happily in the Extended ROM.
Great rom.
Awesome mrfrazzz....just awesome!! Keep up the great work, Crossbow Reloaded works great for my needs.
Thank you so much!
Thanks guys. Hoping someone can do a review of this rom for me after they've played with it for a bit. I'm seeing lots of downloads for it on rapidshare (and trying to get some alternative download sites for it going). I'd just like to get some feedback on it.
I have to say I'm really happy with how this one turned out. So far its been nice, quick, and stable and I still haven't overclocked my phone yet as it seems to perform nicely at the default 195MHz for me (I'll look at overclocking it again, but just haven't felt the need yet).
I hop this release will fix my odd problem i had with first release.
after my battery was completely empty i charged it, phone worked, after few minuts it just jammed and i needed to do a hardreset.
Anyway thnx for this 1 and ill post 2 HTTP mirrors when i have some time to upload them, think somewhere in the morning.
My first ROM
Thanks so much mfrazz and everyone, this was my first ROM for my Dopod 838 and I've had this thing for a year now. Never bothered to play around with it and was never really happy about its functionality until now... its ridiculous how much better it is compared to the manufacturer ROM.
Just so many lil things are better. Working great for me. Thanks a bunch!
2 full speed HTTP mirrors
HTTP mirror 1
HTTP mirror 2
mfrazzz:
Kudos to you for the hard work in prepping this ROM. I've always appreciated (and been a fan of) your patience and professionalism! Now you have taken the plunge into cooking. Congrats!
I am currently using Faria's RT and am seriously considering your Reloaded version as permanent replacement, but I have three issues that I am wondering if this ROM version addresses. These seem to affect all WM6 Roms for the Wizard and I'm curious to know if this ROM corrects them.
1. GPRS data connection fails to re-connect when recovering from a low-signal situation.
2. Device does not vibrate upon receipt of a new email message when it is in sleep mode and the ringer is set to vibrate.
3. Meeting requests sent via the device's invite attendees function do not display the correct date in the recipient's Outlook. They show only the date of creation/modification and not the actual date when the event is to occur.
On another note, have you found a way to send contacts and calendar items via email as opposed to MMS or SMS? I know about the workaround that involves initiating a send via MMS, aborting, and then sending the created file manually via email. Is this still the only way?
Any information is greatly appreciated.
Awsome release I just wish it was more vanilla..this is the closest I can get to a GOOD rom with out all the extra apps. thanks again
Thanks!! looks like some good work cant wait to try it out!!!...as soon as I replace the power supply in my box....lol
3rd Party Apps?
I'm seriously considering this a my next flashing project (I run many 3rd party apps and it's always a pain to switch ROMs).
I remember when people were first releasing WM6 Wizard ROMs there was a lot of discussion about 3rd party apps not working. Is it still only a small subset of apps that work or can I expect most applications to now work fine?
XDA Mobile 6
Taking You to the Limit
XDA Mobile 6 (XM6 for short) is basically Crossbow Reloaded 1.7 rebuilt on the OS 5.2.318 Build 15342.4.0.01 rom that was provided to is by InGeNeTiCs from Howard Forums. You can read information on the work being done on this rom in various ways in this thread. Since the Crossbow Reloaded series was based on the Faria Vanilla Crossbow rom in his ROM Kitchen, and this rom is based on a different rom, I felt a new name was in order.
Please remember that this ROM is a product of what _I_ wanted with many inputs from users of the Crossbow Reloaded series, so no complaints about why does this rom have this in it, or why didn't you put this in there. If you don't like how this rom is spiced, then go grab a ROM, put it in one of the many Kitchens now out, and make your own version. I am open to ideas on how to improve the rom so constructive criticism is appreciated (to a point ).
Please Note: this ROM was NOT intended to push the limits on speed optimization or memory optimization (although it is significantly better than the Crossbow Reloaded series IMO due to the base rom it came from). It was made to be functional, stable, and something that I myself wanted and will use. I've found it to perform at a better than acceptable level for myself, and so far Battery life seems better than other WM6 ROMs I've tried. If you have Battery Drain issues, make sure you flashed back to an official rom before you upgraded to this one, as that should correct extended rom corruption that has been shown to cause battery draining. BatteryStatus is NOT included in this ROM, as I don't see overclocking as necessary. If you want to overclock, you are welcome to download and install BatteryStatus yourself.
Base ROM Information
The base rom was an "Official" Wizard WM6 ROM that was part of the development cycle of WM6 inside of Microsoft (Dogfood as they call it). The base rom was not a port of another device rom with drivers and stuff pieced and parted onto this one, but this was an actual Wizard WM6.
Windows Mobile 6, OS 5.2.318 Build 15342.4.0.01
ROM Version: 10.1.0.811 WWE
ROM Date: 08/11/06
Protocol: 4.1.13.09
ExtROM version: Faria V5.0
There is no Radio, IPL, SPL or Extended ROM.
What's In XDA Mobile 6?
Office 2007
New 8 Button CommManager (yeah only 8 buttons. If you want more then install one of the many 10 or more button ones )
Transcriber
VoIP (See next post for instructions to set this up)
SQLCE
mUn designed onscreen Keyboard
HTC X-Button v1.0 (The new 1.5 version has issues with impacting changes on the Today screen so I'm staying with v1.0) and turned on by default
Mobile Justice (a security app that will send an SMS if an unauthorized SIM is placed in your phone)
TodayAgenda
Notepad editor
Pocket RAR
SIP Config 2.0.1
StartClean
Pocket Screen Capture
HTC Audio Manager
CicleBT (Toggle BlueTooth on and off)
SynchroTime
1-Calc Lite
Total Commander Beta 2.5
WiFiFoFum 2.2.9
PIM Backup to 1.9
Windows Live Search searches via Google
MoDaCo NoData (so you can turn off data sources)
WM5torage 1.73
dotFred TaskManager (with registry editor link)
Smartskey 0.56 (DPAD is set to 0 in the .ini so the up and down scrolling works in the Phone dialer as expected in WM6)
SIM Manager
WM5NewMenu
SMSDRFix
DotFred's SoftKeyAppletEx
DotFred's TaskManager (and registry editor)
WiFiFoFum
Regional Settings default to English (United States) and use a slash for the date seperator (M/dd/yyyy)
Menu sounds work by default
Pressing the "End Call" button does not disconnect GPRS but minimized the active application. Pressing and holding the "End Call" button for about 5 seconds will do a GPRS Disconnect
Internet access over ActiveSync (USB) connection works (You must apply a registry fix on your PC first. See the next post for the fix)
Requirements
You MUST have an IPL and SPL at 2.xx or higher (BOTH not just one or the other).
You MUST be running ActiveSync 4.5 on Windows XP (Vista comes with the correct sync utility, although there have been issues reported about Vista and sync'ing with PPC's so be aware of that).
Before you attempt to upgrade to this ROM, Please follow this thread to learn how to flash roms and CID unlock, and how to fix issues you may run into! It is also recommended that you flash your phone with a Windows XP computer and not Vista. It will work with Vista, but if you run into problems Vista can't talk to a phone in Bootloader mode!
http://forum.xda-developers.com/showthread.php?t=298613
Recomendations
I HIGHLY Recommend that you flash back to an official rom before upgrading to this (or any) custom rom so you have a clean base (and correct any Extended ROM corruption you might have). G4 users would flash back to their provider's latest official release. G3 users can use T-Mobile 2.26 for a good base.
If you use BatteryStatus (its NOT included in the rom!) to overclock, I don't recommend overclocking above 260Mhz, and the CPUscaler settings in BatteryStatus should not be set to a min lower than 143MHz (or your device may not wake back up after going to sleep). Personally, I have not tried to overclock this rom due to the performance it already has.
I STRONGLY recommend you use the T-Mobile 2.19 UK Radio (this is a must for Cingular/AT&T customers). Newer Radio versions tend to have missed calls and SMS messages (just like with all other WM6 ROMs). G4 users, see the next post on flashing the Splash screens for a tip if you get errors trying to flash the 2.19 Radio ROM.
UPDATE: There appears to be a possible fix for the Radio issue on Cingular. Attached is a cab you can run to implement the change. I've successfully run Cingular 2.25 radio on my phone for 36 hours now with no missed calls or SMS messages. Others have had success with 2.61 radio after doing this fix. You can follow this thread (starting around post 9) on this.
Credits
I would like to thank the following in help (directly and indirectly) with XDA Mobile 6:
Faria for providing the initial ROM Kitchen that got me cooking
anichillus for the fantastic Core ROM Kitchen which was exclusively used in the production of this ROM
Dr Puttingham for the guides, information and giving me a pointer to the cool 8 Button CommManager in this rom
Molski for having a nice tutorial on various cooking tools and providing easy access to info at http://www.molski.biz
mattk_r for inspiration and pushing the envelope on compressing stuff
edhaas for the rompacker kitchen and squeezing tool ported over to the Wizard forum
Those that took the time to help beta/alpha test the early version of this base rom
InGeNeTiCs for taking the time to dump the rom Microsoft put on his phone so we could have this base rom
Everyone that installed and gave feedback and support on the Crossbow Reloaded versions
Many others here at XDA-Developers.com that provided information, tips, and suggestions that I used when putting this together
A HUGE thanks goes to all the chefs that support our community!
Known Issues
For those using ShellTool to flash this rom, Its been reported that shell too does not show that the flashing process has completed for some. Give the flash a good 15 - 30 minutes to make sure its done before you pull the plug. Those that have done this report that the phone boots fine into XM6.
The new CommManager has a bug where when you press the settings (right softkey) in it, it only shows one item: Wi-Fi Settings, and when you click on it you go to Bluetooth settings. The fixed version of this can be installed with the cab attached to this post. Soft reset the phone, install the cab, and it will soft reset after it completes, and you will have the fixed CommManager (no install of the 10 Button CommManager is required now). Updates to the 8 button CommManager can be followed in this thread.
The link for Midlet Manager is missing (but Midlet Manager is in the rom). To fix this use TotalCommander to create a shortcut in \Windows\Programs that points to \Windows\jmm.exe . Or the other option is to install a newer version of Midlet manager from This Thread.
Official Download Sites for XDA Mobile 6
I'll update this list with mirrors as they become available
HTTP Download (Thanks TheWizzard2203)
PutStuff and MegaUpload (Thanks Indra9110)
RapidShare
.
Addons for XDA Mobile 6
Voice Command
MS Voice Command 1.6 US HERE and HERE and HERE
MS Voice Command 1.6 German HERE and HERE and HERE
MS Voice Command 1.6 FR HERE and HERE and HERE
MS Voice Command 1.5 UK HERE and HERE
How to not have a 24hour Clock (or how to show AM/PM)
This works on all WM6 roms
Go to Start > Settings > System > Regional Settings
Make sure you have the correct Region selected
Click on the Time tab
Click on the drop down box for Time Style
Notice the little up and down arrows? This is a scrolling region in this dropdown. Click the up arrow a couple of times and you'll find h:mm:ss tt
Thats it. Microsoft is amazing at having a 2 line scrolling region on this dropdown. You'd think they would have had at least 3 or 4 lines show up for chosing (and it would be more obvious that its a scrolling region then too).
VoIP Setup Instructions
Thanks to joaosousa for the following steps!
!!! Only Tested in a Wifi network !!!
Install the wm6voip.cab.
Restart your Wizard (Soft Reset).
Go to Start > Programs > Accessories and open SIPConfig Aplication.
Insert your VoIP account information. (See example below)
Restart your wizard (Soft Reset).
Now you should be able to use VoIP, check the status of the service in the today screen.
SIPConfig configuration (VoipBuster account):
Service name: Voip
SIP Server: sip.voipbuster.com
UserName: my_voipbuster_user_name
Password: my_voipbuster_user_password
This didn't work? Then please check this thread:
http://forum.xda-developers.com/showthread.php?t=299950
GPRS / MMS Setups
Attached to this post is the cab file for Cingular users to setup GPRS and MMS.
For T-Mobile US users, here's a link to a post by FZZF that has info for your setup of GPRS and MMS:
http://forum.xda-developers.com/showpost.php?p=1250747&postcount=408
MMS auto config t-mobile.cab (Thanks to marscandybars for posting this)
Here's the settings for the original (Pre-Cingular) AT&T Wireless (blue sim)
German users check HERE
Greek users, Tna posted a cab for Greek Operators, or check HERE
European carriers should check out this thread by praneetsrivastav.
Connecting WM6 to the Internet via ActiveSync 4.5 on Windows XP
For those having issues connecting to the internet via Active Sync, cut and paste this code onto your PC in a file called net_over_activesync.reg and run it (on your PC not your phone)
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Splash Screens and Splash Only RUU for G4
For G4 users, I've attached a zip file with the Splash Screens of this rom (since you don't get them when you use the shell tool). As I understand it, this is completely safe for a G4 as its nothing but splash screens (no OS, IPL, SPL, Extended ROM, etc, just splash and htc logo screens). I've also placed the .bmp files that make up the splash screen in the zip file so you can see them directly before flashing this. Before anyone asks, yes, the htc logo one is grainy. I had to do that due to size limitations of the file. I tried for a couple of hours to get a nicer version to work but it wouldn't display correctly (seems to have to be pretty low res / non-complex)
If you have problems flashing the above RUU on a G4, then extract this http://forum.xda-developers.com/attachment.php?attachmentid=29158&d=1152698784 and pull the nk.nbf file out of the above Splash Screen file and put it into the directory of this one and run this RUU. You can use the same method for flashing the Radio Only ROM (pull the nk.nbf file out of the radio only rom and put it into the directory of this RUU and run it). Thanks anichillus for that link!
Weather Panel Setup
See my post in the Wizard forum on how I setup WeatherPanel. It will give you a fixed dll with correct moon phases through 2008, new/better Moon phase icons, and a cool theme called Chameleon-240 QVGA. I dumped SBSH Pocket Weather after seeing this setup
Hermes Black Cabs that may be of Interest
XM6 has Transcriber, VoIP, and Windows Live all integrated in it, but I wanted to point out the Black 3 Add-on CABs file as there are others in it that may be of interest. Included in this file is Cyberon VoiceCommander, Cyberon Voice Dial, VIjay555 utils, and a Slingbox patch (none of these I've tested) and Adobe Reader LE.
10 Button Black CommManager
Some seem to think 10 buttons are better than 8, and some just like the look of the 10 button CommManager over the 8 button one in this rom. So attached to this post is a zip file with the 10 Button Black CommManager. You shouldn't have to use the cert cab file, just run the CommManager one.
Turning off Word Selection
Some people do not like how Windows Mobile tries to suggest words that you may be typing. If you are one of those people, jacob-mda wrote up a post on how to turn it off. Check out This Thread.
New DialPad to match the CommManager
The EquinoXe was successful at pulling out the dial pad from the HTC Touch and it matches up with the CommManager in XM6 very nicely (see pic attached below). I've attached the CAB to this thread, so if you'd like to use this dialpad, just download and install. Cool!
More info to come, so check back here periodically!
.
Included Apps Info
Info on Included Apps
MobileJustice v0.8
MobileJustice is an Anti-theft app that you can configure on your phone. Just go to Start > Programs > Accessories and click on the MJConfig icon (first time in you will get a message that there isn't a config file, just click ok and it will be created). To us this, check the Enabled box, then click Add on the Allowed line. You can then setup your SIM card as an authorized one, and add other SIM cards IMSI numbers if you use more than one. Next click on Add next to Report to: and setup an SMS number (wife, friend, colleague) where you want the text message to go to if an unauthorized SIM is put into your phone. You can add multiple SMS numbers if you want. At this point, your phone will now be setup so that if an unauthorized sim is put in it, then it will send an SMS (with no record of it being sent) to your Report To list on the next boot (you can test this by not setting up (or removing) the Allowed and then doing a soft reset).
For more advanced, you can turn on the Disp MsgBox at the top and then put in some text in the MsgBox text line. This will pop up a Message box on the screen of the phone after a boot, if an unknown sim is in the phone.
You can also enable RMon (bottom half of the screen), put in a pass phrase, and then turn on MsgBox (GPS and LocCall do not work on Wizards, and the other options haven't been implemented in this version). By doing this, you can now send an SMS to your phone in the following format:
+m passphrase message
Rmon will intercept the sms message (so it will not show up as a received message), and if the passphrase matches the one you put in the configuration, then it will pop up a message box on the phone with your message in it (so you can secretly send messages to the thief to possibly intimediate them (or whatever).
The project page for MobileJustice is located at: https://sourceforge.net/projects/mjustice/
Just downloading now - I'll flash and post my comments
Downloading now
Thnx mfrazz!
Mirror commin soon
Works fine for now, only i missed battery status
Maybe an idea to put it back in? If it isnt needed for Overclock purposes its still handy for batteryStatus, Signalstrenght, Free mem etc
Think about it
Ohw i love the new com manager (L)
mfrazzz, you working late again, you must have been up all night.
Wow this looks like another great package, thanks for all your hard work and dedication.
Can you make a www.putstuff.com mirror?
It seems that i will flash it today... I am currently with faria's new rom, and i am loving it, but i must test XM6
WOOHOO!
Holy crap you guys rock!!
Ever since the thread of the possible new base ROM started, I've been backing up my stuff on an hourly basis waiting for the chance to wipe my 8125 G3.....
Now I know I'll be in 7th heaven in a little while....
Thank you so much for so much hard work..... so much for me getting anything done at work today!! LOL
Yo mfrazzz, you've really astonished me on how fast you made your new rom coming out. Really cool. And i'm interested in the cabs.
looks great!
can you provide info about free program and storage mem.?
hey
you did say not to say 'put this in, take this out' but figured its worth a shot...
could you provide a cab to change the keyboard style back to the stock black and white one?!
thanx
Yo mfrazzz,
As always, got you a 100Mbit Mirror again.
Good ol mFrazzz...now that's what I've been waiting for, the real deal. Thanks once more for all the effort and hardwork.
Thanks guys for the mirror! I'll be flashing real soon and updating as we go along.
2.25 Radio
I am using the orig. Official WM6 from Ingenetics and have no probs with radio.
Why can't / shouldn't your rom be used with 2.25 radio?
Is it a reg tweak, a program, or something else causing the problem?
theloon said:
I am using the orig. Official WM6 from Ingenetics and have no probs with radio.
Why can't / shouldn't your rom be used with 2.25 radio?
Is it a reg tweak, a program, or something else causing the problem?
Click to expand...
Click to collapse
Radios other than 2.19.11 are known to cause dialpad issues during calls in WM6.
ex.: If you try to check your voicemail, the keypad won't send tones to erase message. Soft re-set required to continue.
Others have had success with other radios but for the ones who didn't, radio 2.19.11 was the fix. There are write-ups about it all thru the site.
Thanks for the ROM. Installed it and running fine!
TheWizzard2203; thanks for the mirror.
You're welcome. As long as i trust the rom baker i'll supply a mirror. And i know mfrazzz always cooks the roms just the way we like it.
@mfrazzz: Isn't it possible to make the CommManager the way you made it look now, but then with the 10 buttons in it? That would be really nice. I really like the way it looks in your new rom, more than the black one with 10 buttons, but the 10 button comm manager has more functionality.
This com manager is like HTC Touch commanager...
XDA Mobile 6 Release 2a
Taking You to the Limit
Release 3 is now available! See http://forum.xda-developers.com/showthread.php?t=324632 for downloads and discussions on this latest version of XM6!
On 7/7/07 Release 2a replaced Release 2. See known issues for the slow program folder fix, or upgrade to Release 2a
XDA Mobile 6 Release 2a (XM6r2a for short) is the second version of the popular XM6 rom for the Wizard. This is mainly a release to fix some bugs, and update apps that were in the first version of XM6.
I'm also releasing a "Lite" (not Vanilla, or Clean, but "Less Filling") version of XM6. The Lite is the exact same build with Apps removed (but some "essential tools" are left in, thus its not Vanilla or Clean, but Lite).
XM6 is built on the OS 5.2.318 Build 15342.4.0.01 rom that was provided to us by InGeNeTiCs from Howard Forums. One major difference between the original Release and Release 2 is that in this version the ROM, SYS, and OEM folders originated from the Ingenetics Kitchen work by mattk_r (where the original release of XM6 was a mismash of Faria ROM kitchen OEM packages, and ones I built). Organization of this rom is much better (if you want to dump it)
Please remember that this ROM is a product of what _I_ wanted with many inputs from users of the Original XM6 and the Crossbow Reloaded series, so no complaints about why does this rom have this in it, or why didn't you put this in there. If you don't like how this rom is spiced, then go grab a ROM, put it in one of the many Kitchens now out, and make your own version. I am open to ideas on how to improve the rom so constructive criticism is appreciated (to a point ).
Please Note: this ROM was NOT intended to push the limits on speed optimization or memory optimization. It was made to be functional, stable, and something that I myself wanted and will use. I've found it to perform at a better than acceptable level for myself, and so far Battery life seems very good for me and those beta testing this. If you have Battery Drain issues, make sure you flashed back to an official rom before you upgraded to this one, as that should correct extended rom corruption that has been shown to cause battery draining. BatteryStatus is NOT included in this ROM due to how fast changes come out with this application, and not everyone likes it or uses it. If you want to overclock or use other features of BatteryStatus, you are welcome to download and install the latest version of BatteryStatus yourself.
Base ROM Information
The base rom was an "Official" Wizard WM6 ROM that was part of the development cycle of WM6 inside of Microsoft (Dogfood as they call it). The base rom was not a port of another device rom with drivers and stuff pieced and parted onto this one, but this was an actual Wizard WM6.
Windows Mobile 6, OS 5.2.318 Build 15342.4.0.01
ROM Version: 10.1.0.811 WWE
ROM Date: 08/11/06
Protocol: 4.1.13.09
There is no Radio, IPL, SPL or Extended ROM.
What's In XDA Mobile 6 Release 2a?
Both versions have the following
Office 2007
New 8 Button "Touch" Style CommManager (yeah only 8 buttons. If you want more then install one of the many 10 or more button ones )
VoIP (See next post for instructions to set this up)
SQLCE
HTC X-Button v1.0
Notepad editor
Pocket RAR (ROM already has associations with .rar and .zip setup)
SIP Config 2.0.1
SynchroTime
Total Commander Beta 2.5
PIM Backup to 2.4 (updated in 2a)
Windows Live Search searches via Google
WM5torage 1.75
SIM Manager 6.13
psShutXP was Removed in 2a due to it not working properly and causing problems with Programs folder
dotFred TaskManager (with registry editor link setup and associations built in for .reg files)
Regional Settings default to English (United States) and use a slash for the date seperator (M/dd/yyyy)
Menu sounds work by default
Pressing the "End Call" button does not disconnect GPRS but minimized the active application. Pressing and holding the "End Call" button for about 5 seconds will do a GPRS Disconnect
Internet access over ActiveSync (USB) connection works (You must apply a registry fix on your PC first. See the next post for the fix)
The Full Release also contains the following
mUn designed onscreen Keyboard skin (grey/green one)
Mobile Justice (a security app that will send an SMS if an unauthorized SIM is placed in your phone)
TodayAgenda
StartClean
Pocket Screen Capture
HTC Audio Manager
CicleBT (Toggle BlueTooth on and off)
1-Calc Lite
WiFiFoFum 2.2.12
MoDaCo NoData (so you can turn off data sources)
Smartskey 0.56 (DPAD is set to 0 in the .ini so the up and down scrolling works in the Phone dialer as expected in WM6)
SMSDRFix
DotFred's SoftKeyAppletEx
Requirements
You MUST have an IPL and SPL at 2.xx or higher (BOTH not just one or the other).
You MUST be running ActiveSync 4.5 on Windows XP (Vista comes with the correct sync utility, although there have been issues reported about Vista and sync'ing with PPC's so be aware of that).
Before you attempt to upgrade to this ROM, Please follow this thread to learn how to flash roms, CID unlock your phone, and how to fix issues you may run into! It is also recommended that you flash your phone with a Windows XP computer and not Vista. It will work with Vista, but if you run into problems Vista can't talk to a phone in Bootloader mode!
Recomendations
I HIGHLY Recommend that you flash back to an official rom before upgrading to this (or any) custom rom so you have a clean base (and correct any Extended ROM corruption you might have). G4 users would flash back to their provider's latest official release. G3 users can use T-Mobile 2.26 for a good base.
If you use BatteryStatus (its NOT included in the rom!) to overclock, I don't recommend overclocking above 260Mhz, and the CPUscaler settings in BatteryStatus should not be set to a min lower than 143MHz (or your device may not wake back up after going to sleep).
Radio Issues UPDATE: There appears to be a possible fix for the Radio issue on Cingular. Attached is a cab you can run to implement the change. I've successfully run Cingular 2.25 radio on my phone for many days now with no missed calls or SMS messages. Others have had success with 2.61 and 2.69 radios after doing this fix. You can follow this thread (starting around post 9) on this. A newer cab is now posted and info on it can be found around post 214.
Credits
I've moved the credits to the 6th post of this thread as this post has become too big.
Known Issues
The base rom has a bug / feature where if GPRS is active, unanswered calls may not show up as a missed call and may not give notification of the unanswered call. If this happens, the unanswered call shows up in the history as an answered call with a duration of 1 or 2 seconds.
In XM6r2 some people were having problems when they go to Start > Programs and the folder was taking a long time to paint or the phone would hang. To resolve this, remove the Shutdown.lnk and Display Switch.lnk located in \Windows\Start Menu\Programs or upgrade to XM6r2a
Every WM6 rom I've tried has an issue where if you use the "Press and Hold" of the CommManager button to switch to and from Vibrate mode, that the ringtone may not play when not in vibrate mode. To work around this go to Settings > Phone and play your ringtone and your ringing will work again.
Official Download Sites for XDA Mobile 6 Release 2a
XM6r2a Full Version
HTTP Download by n3rxs
FTP Download by TheWizzard2203
Sendspace Download
RapidShare Download
XM6r2a Lite Version
HTTP Download by n3rxs
FTP Download by TheWizzard2203
Sendspace Download
RapidShare Download
.
Voice Command
MS Voice Command 1.6 US HERE and HERE and HERE
MS Voice Command 1.6 German HERE and HERE and HERE
MS Voice Command 1.6 FR HERE and HERE and HERE
MS Voice Command 1.5 UK HERE and HERE
How to not have a 24hour Clock (or how to show AM/PM)
This works on all WM6 roms
Go to Start > Settings > System > Regional Settings
Make sure you have the correct Region selected
Click on the Time tab
Click on the drop down box for Time Style
Notice the little up and down arrows? This is a scrolling region in this dropdown. Click the up arrow a couple of times and you'll find h:mm:ss tt
Thats it. Microsoft is amazing at having a 2 line scrolling region on this dropdown. You'd think they would have had at least 3 or 4 lines show up for chosing (and it would be more obvious that its a scrolling region then too).
GPRS / MMS Setups
This rom uses the new Arcsoft 4.0 software which has SMS and MMS merged together. Overall I personally like this better in my using it, so I put it into this rom. To setup your MMS settings though is a little different / odd. Here's what you do:
Go to Messaging
Menu > New > MMS
Select whichever MMS template
Menu > Options > MMS Options
Now you are in the familiar MMS settings page. You can choose the Servers tab to setup your MMS server.
Here is a list of automated and manual ways of setting up GPRS and MMS for various cell providers and regions:
Attached to this post is the cab file for Cingular users to setup GPRS and MMS.
For T-Mobile US users, here's a link to a post by FZZF that has info for your setup of GPRS and MMS
Here's another link with cab files for T-Mobile US users:
MMS auto config t-mobile.cab (Thanks to marscandybars for posting this)
Here's the settings for the original (Pre-Cingular) AT&T Wireless (blue sim)
German users check HERE
Greek users, Tna posted a cab for Greek Operators, or check HERE
European carriers should check out this thread by praneetsrivastav.
VoIP Setup Instructions
Thanks to joaosousa for the following steps!
!!! Only Tested in a Wifi network !!!
Install the wm6voip.cab.
Restart your Wizard (Soft Reset).
Go to Start > Programs > Accessories and open SIPConfig Aplication.
Insert your VoIP account information. (See example below)
Restart your wizard (Soft Reset).
Now you should be able to use VoIP, check the status of the service in the today screen.
SIPConfig configuration (VoipBuster account):
Service name: Voip
SIP Server: sip.voipbuster.com
UserName: my_voipbuster_user_name
Password: my_voipbuster_user_password
This didn't work? Then please check this thread:
http://forum.xda-developers.com/showthread.php?t=299950
Connecting XM6r2a to the Internet via ActiveSync 4.5 on Windows XP
For those having issues connecting to the internet via Active Sync, cut and paste this code onto your PC in a file called net_over_activesync.reg and run it (on your PC not your phone)
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Splash Screens and Splash Only RUU for G4
For G4 users, I've attached a zip file with the Splash Screens of this rom (since you don't get them when you use the shell tool). As I understand it, this is completely safe for a G4 as its nothing but splash screens (no OS, IPL, SPL, Extended ROM, etc, just splash and htc logo screens). I've also placed the .bmp files that make up the splash screen in the zip file so you can see them directly before flashing this. Before anyone asks, yes, the htc logo one is grainy. I had to do that due to size limitations of the file. I tried for a couple of hours to get a nicer version to work but it wouldn't display correctly (seems to have to be pretty low res / non-complex)
If you have problems flashing the above RUU on a G4, then extract this http://forum.xda-developers.com/attachment.php?attachmentid=29158&d=1152698784 and pull the nk.nbf file out of the above Splash Screen file and put it into the directory of this one and run this RUU. You can use the same method for flashing the Radio Only ROM (pull the nk.nbf file out of the radio only rom and put it into the directory of this RUU and run it). Thanks anichillus for that link! You can also check this thread for another RUU that is in English and seems to work for most G4 users. Thanks Vippie!
Weather Panel Setup
See my post in the Wizard forum on how I setup WeatherPanel. It will give you a fixed dll with correct moon phases through 2008, new/better Moon phase icons, and a cool theme called Chameleon-240 QVGA. I dumped SBSH Pocket Weather after seeing this setup
Hermes Black Cabs that may be of Interest
Transcriber can be added back into XM6r2a by using the Black 3 Add-on CABs file. There may be others in it that may be of interest also for some. Included in this file is Cyberon VoiceCommander, Cyberon Voice Dial, VIjay555 utils, and a Slingbox patch (none of these I've tested) and Adobe Reader LE.
10 Button Black CommManager
Some seem to think 10 buttons are better than 8, and some just like the look of the 10 button CommManager over the 8 button one in this rom. So attached to this post is a zip file with the 10 Button Black CommManager. You shouldn't have to use the cert cab file, just run the CommManager one.
Turning off Word Auto Completion
Some people do not like how Windows Mobile tries to suggest words that you may be typing. If you are one of those people, jacob-mda wrote up a post on how to turn it off. Check out This Thread.
Auto Completion for Spanish
User peu found the file to change the auto completion of words to Spanish. You can check his post here for details and a link.
New DialPad to match the CommManager
The EquinoXe was successful at pulling out the dial pad from the HTC Touch and it matches up with the CommManager in XM6 very nicely (see pic attached below). I've attached the CAB to this thread, so if you'd like to use this dialpad, just download and install. Cool! WARNING: If you install this, you can't just uninstall it. It requires a HARD RESET or you have to reflash this rom to go back to the original dialpad that was included in WM6r2! Some love this DialPad and the features of it, and others don't like it.
BatteryStatus (for Overclocking, CPUScalar, and much much more)
BatteryStatus is a very popular utility around here and for good reasons. Currently its in a beta phase and the author is releasing new versions of the beta constantly so I decided not to put it in the rom and let people install whatever build of it they want. Also, some versions of BatteryStatus have been known to cause excessive battery drain, so be aware of that too. You can find it in the Official BatteryStatus thread and if you do use it, feel free to give feedback on it in that thread as they are always looking for ways to improve it.
NOTE: If you do use overclocking, I recommend you use the OMAP Apps tab to setup Camera to be at 195Mhz as it can mess up the display if you are overclocked and doing the camera.
-----------------------------------------------------------------------------------------------------------
I'm always updating these first posts, so check here periodically for new information!
.
Info on Included Apps
MobileJustice v0.8
MobileJustice is an Anti-theft app that you can configure on your phone. Just go to Start > Programs > Accessories and click on the MJConfig icon (first time in you will get a message that there isn't a config file, just click ok and it will be created). To us this, check the Enabled box, then click Add on the Allowed line. You can then setup your SIM card as an authorized one, and add other SIM cards IMSI numbers if you use more than one. Next click on Add next to Report to: and setup an SMS number (wife, friend, colleague) where you want the text message to go to if an unauthorized SIM is put into your phone. You can add multiple SMS numbers if you want. At this point, your phone will now be setup so that if an unauthorized sim is put in it, then it will send an SMS (with no record of it being sent) to your Report To list on the next boot (you can test this by not setting up (or removing) the Allowed and then doing a soft reset).
For more advanced, you can turn on the Disp MsgBox at the top and then put in some text in the MsgBox text line. This will pop up a Message box on the screen of the phone after a boot, if an unknown sim is in the phone.
You can also enable RMon (bottom half of the screen), put in a pass phrase, and then turn on MsgBox (GPS and LocCall do not work on Wizards, and the other options haven't been implemented in this version). By doing this, you can now send an SMS to your phone in the following format:
+m passphrase message
Rmon will intercept the sms message (so it will not show up as a received message), and if the passphrase matches the one you put in the configuration, then it will pop up a message box on the phone with your message in it (so you can secretly send messages to the thief to possibly intimediate them (or whatever).
The project page for MobileJustice is located at: https://sourceforge.net/projects/mjustice/
Original version links
Here are the links for the original release of XM6r2
In case someone still wants XM6r2, here are the original download links. You should install XM6r2a, but I'm keeping these links just in case
XM6r2 Full Version
HTTP Download by n3rxs
FTP Download by TheWizzard2203
SendSpace
RapidShare
MegaUpload
XM6r2 Lite Version
HTTP Download by n3rxs
FTP Download by TheWizzard2203
SendSpace
RapidShare
Note that psShutXP was removed from XM6r2, and PIM Backup was upgraded from 2.2 to 2.4. Those are the only changes between r2 and r2a.
Hey Brillant!!!
Do you have any screen shots to show the people, what a excellent system you have made??
I am running XDA Mobile 6 and look forward to flashing the "r2".
Great work
Darren
XM6r2 Credits
Credits
I would like to thank the following in help (directly and indirectly) with XDA Mobile 6:
Faria for providing the initial ROM Kitchen that got me cooking
anichillus for the fantastic Core ROM Kitchen which was exclusively used in the production of this ROM
Dr Puttingham for the guides, information and giving me a pointer to the cool 8 Button CommManager in this rom
Molski for having a nice tutorial on various cooking tools and providing easy access to info at http://www.molski.biz
mattk_r for inspiration and pushing the envelope and for the fantastic set of OEM packages
Those that took the time to help beta test XM6 Release 2. We worked out a number of issues with a nice long beta test!
Everyone that installed and gave feedback and support on the original XDA Mobile 6 thread
Everyone that I thanked in my other ROM releases!
mfrazzz said:
I'm still updating the first couple of posts. Screen shots are coming.
Since most seem interested in memory, the Lite version gives you about 29meg of free Program memory. The Full Version just over 28meg of free Program memory (so not a lot of difference, but thats right after flash).
Click to expand...
Click to collapse
Thanks for the quick answer. What time is it there? Here it's 9am.
Darren
mfrazzz,
you should try and get hold of a link for the 1.6 UK version of Voice command, as I had tried the 1.5 on the XDA Mobile 6 and it didn't work. 1.6 works fine.
Darren
Congrats!
Congrats on the final release. Unfortunately I never got round to installing the beta as I just didn't have time. Really looking forward to trying the final cooked version though - this looks like a superb combination of features and apps.
I trust you managed to resolve the comm manager issue?
melvynadam said:
Congrats on the final release. Unfortunately I never got round to installing the beta as I just didn't have time. Really looking forward to trying the final cooked version though - this looks like a superb combination of features and apps.
I trust you managed to resolve the comm manager issue?
Click to expand...
Click to collapse
No problem on not being able to help with the Beta, seemed a number of people I invited couldn't participate, but we all have lives outside of XDA (hard to believe, but we do ).
Yes, the CommManager issue in XM6 is fixed in XM6r2. And then the CommManager issue I had with the Lite beta is also fixed in this released version.
dleeming said:
you should try and get hold of a link for the 1.6 UK version of Voice command, as I had tried the 1.5 on the XDA Mobile 6 and it didn't work. 1.6 works fine.
Click to expand...
Click to collapse
If someone will upload the UK 1.6 someplace, I'll link to it in the second thread, but I've never seen a copy of the UK 1.6 version of VC.
And I'm MDT, so GMT -6... So its 1:35am here (and I'm heading to bed). But I made my goal of releasing this rom for the 4th of July. So my Fireworks for the Wizard community
Also screenshots have been uploaded to the first post, and the 2nd and 3rd posts have been updated with info...
Waiting for comments about the first splash screen... Finally did one that doesn't stink (IMO). I'm sure some won't care for it, but its fun for me (I'm a SciFi nut).
mfrazzz said:
Waiting for comments about the first splash screen... Finally did one that doesn't stink (IMO).
Click to expand...
Click to collapse
Please include screenshots of the splash screens in the first post.
thats now killing me! Already on Release 2!! Nice work
Do I need to Flash back to official Rom from XDA 6 to get XDA 6 R2 working well? Not a problem if I have the time.
Will see the test soon
I could not get ROMUpdateUtility.exe to work with my phone. I used Shelltool and had no problems!
Looks good.
i used T-Mobile 2.19.11 UK Radio with 8125 (G4)...
do I need setup mfrazzz Cingular WM6 Radio Fix.cab ???
It transpires that this ROM was released just in time for for dotfred to release PimBackup v2.3.
...and for WiFiFoFum v2.2.12 to come out.
melvynadam said:
It transpires that this ROM was released just in time for for dotfred to release PimBackup v2.3.
...and for WiFiFoFum v2.2.12 to come out.
Click to expand...
Click to collapse
Well guess I will have to test all of them now. ha ha ha
melvynadam said:
It transpires that this ROM was released just in time for for dotfred to release PimBackup v2.3.
...and for WiFiFoFum v2.2.12 to come out.
Click to expand...
Click to collapse
KKK that not fair!
ahh btw, mike i forgot to say, using shelltools to flash my device now take only 8-10 minutes to flash.
no more problem =]
Excellent job, mfrazzz. I have been running XM6 for a while now. I'll try XM62 and report back.
This is just great, for the first time in ages the flash completes in about 9 mins using shelltool. I personally had to change the 8 button touch comm manager for the same one again (sounds confusing) as the default one in this rom has cleartype enabled, and on some roms the same comm manager it's disabled, so i installed one again that has it disabled. Maybe there is an easier way to do it ?
I also had a few lockups while scrolling up and down in the programs section. So i removed the battery and it seems ok now.
Otherwise brill so far...
hmm, i had it lock up again in the programs section after trying shutdown, or display switch, one of those anyway. Also with the shutdown menu if you select shutdown it only turns off the display, so i don't think that works properly anyway. Finally if i turn off the phone it does'nt always start up correctly, it hangs half way through, so i have to reset it, then its ok again.
Maybe a few bugs, not sure ?
Crossbow Reloaded v1.7
Smooth and Stable WM6 Computing for the Wizard
The latest incarnation of the Crossbow Reloaded series is again based on the Faria WM6 ROM that was part of the Faria ROM Kitchen. I've continued to modify the base rom to adjust and update it and work out a few bugs / features, but its still the stable base that makes Crossbow Reloaded a dependable WM6 version for the Wizard devices. One of the major changes in the cooking process of this rom is the use of edhaas ROM Packer Kitchen. I highly recommend using the tools in this to gain extra room and to overall speed up how some things work.
Just like with the previous releases, please remember that this ROM is a product of what _I_ wanted with many inputs from users of 1.0 and 1.5, so no complaints about why does this rom have this in it, or why didn't you put this in there. If you don't like how this rom is spiced, then go grab the Faria ROM Kitchen and make your own version. I am open to ideas on how to improve the rom (most of the changes in this version are direct results of ideas and comments posted in the Crossbow Reloaded 1.5 thread).
Please Note: this ROM was NOT intended to push the limits on speed optimization or memory optimization. It was made to be functional, stable, and something that I myself wanted and will use. I've found it to perform at a better than acceptable level for myself, and so far Battery life seems just as good as any other WM6 ROM I've tried. If you have Battery Drain issues, make sure you flashed back to an official rom before you upgraded to this one, as that should correct extended rom corruption that has been shown to cause battery draining. Also note that I've been running this version for days and have not even used overclocking and found it to perform very nicely (so Overclocking should work very nicely if you feel the need).
What's Different in V1.7 from V1.5?
Removed Transcriber (actually this wasn't in v1.5 or v1.0, but I just want to make it clear its not here either) (Can be added back via CAB)
Added VoIP (See next post for instructions to set this up)
HTC X-Button downgraded to v1.0 (The new 1.5 version has issues with impacting changes on the Today screen) and now turned on by default
Removed PocketXpdf and added Adobe Reader LE back
Added Mobile Justice (a security app that will send an SMS if an unauthorized SIM is placed in your phone)
Added SIP Config 2.0.1
Added StartClean
Added Pocket Screen Capture
Added HTC Audio Manager
Added CicleBT (Toggle BlueTooth on and off)
Added SynchroTIme
Removed default Calculator and Added 1-Calc to replace it
Removed GSFinder (use Total Commander instead)
Upgraded Total Commander to Beta 2.5
Upgraded WiFiFoFum to 2.2.9
Upgraded PIM Backup to 1.9
Upgraded to Office 2007
Numerous fixes and tweaks. Also compression of some large app files that now actually make them start faster!
New first and second splash screens
Windows Live Search searches via Google
Base ROM Information
This is my modified version of Faria's WM6 found in the Faria ROM Kitchen V2, so its a "fixed" version of Faria's "the real thing" release that was then made vanilla and that I've added packages back into, and changed/fixed/enhanced.
ROM Version: 2.18.0.0 WWE
ROM Date: 02/14/06
Protocol: 4.1.13.09
ExtROM version: Faria V5.0
There is no Radio, IPL, SPL or Extended ROM.
In addition to the changes mentioned above for what is different, here is a list of the other added apps that were also in the 1.5 release:
TodayAgenda
Notepad editor
Pocket RAR
HTC X-Button 1.0 (turned on by default)
PIM Backup
Total Commander
MoDaCo NoData (so you can turn off data sources)
mUn Keyboard Skin
WM5torage 1.73
dotFred TaskManager (with registry editor link)
BatteryStatus 1.04.202 Beta 3 Build 0195 (There are newer versions out now, but I had issues with battery drain and other problems so kept the same version as in the original release as it seemed to work the best for me)
Smartskey 0.56 (DPAD is set to 0 in the .ini so the up and down scrolling works in the Phone dialer as expected in WM6)
10 Button CommManager with Black theme
SQLCE
SIM Manager
WM5NewMenu
SMSDRFix
DotFred's SoftKeyAppletEx
DotFred's TaskManager (and registry editor)
WiFiFoFum
Regional Settings default to English (United States) and use a slash for the date seperator (M/dd/yyyy)
Menu sounds work by default
Pressing the "End Call" button does not disconnect GPRS but minimized the active application. Pressing and holding the "End Call" button for about 5 seconds will do a GPRS Disconnect
Internet access over ActiveSync (USB) connection works (You must apply a registry fix on your PC first. See the next post for the fix)
Requirements
You MUST have an IPL and SPL at 2.xx or higher (BOTH not just one or the other).
You MUST be running ActiveSync 4.5 on Windows XP (Vista comes with the correct sync utility, although there have been issues reported about Vista and sync'ing with PPC's so be aware of that).
Before you attempt to upgrade to this ROM, Please follow this thread to learn how to flash roms and CID unlock, and how to fix issues you may run into! It is also recommended that you flash your phone with a Windows XP computer and not Vista. It will work with Vista, but if you run into problems Vista can't talk to a phone in Bootloader mode!
http://forum.xda-developers.com/showthread.php?t=298613
Recomendations
I HIGHLY Recommend that you flash back to an official rom before upgrading to this (or any) custom rom so you have a clean base (and correct any Extended ROM corruption you might have). G4 users would flash back to their provider's latest official release. G3 users can use T-Mobile 2.26 for a good base.
If you use BatteryStatus (its included in the rom!) to overclock, I don't recommend overclocking above 260Mhz, and the CPUscaler settings in BatteryStatus should not be set to a min lower than 143MHz (or your device may not wake back up after going to sleep).
For Cingular users, I STRONGLY recommend you use the T-Mobile 2.19 UK Radio. Newer Radio versions tend to have missed calls and SMS messages (just like with all other WM6 ROMs). G4 users, see the next post on flashing the Splash screens for a tip if you get errors trying to flash the 2.19 Radio ROM.
Credits
I would like to thank the following in help (directly and indirectly) with Crossbow Reloaded 1.7:
Faria for providing both the base rom and the ROM Kitchen that I used to "cook" this ROM.
edhaas for porting and putting together the RomPacker Kitchen and the tools to squeeze / compress apps
Funman for putting together the fantastic PDF document on using the ROM Kitchen and for answering questions and fixing bugs in packages I hastily put together
ADB100 for finding and fixing some bugs in packages I worked on
Molski for having a nice tutorial on various cooking tools and providing easy access to info at http://www.molski.biz
abenk for providing the new Crossbow Reloaded logo
ANTC for ideas and inspiration on parts of this release
Those that took the time to help beta test this version in its early stages
Everyone that installed and gave feedback and support on the previous Crossbow Reloaded versions
Many others here at XDA-Developers.com that provided information, tips, and suggestions that I used when putting this together
A HUGE thanks goes to all the chefs that support our community!
Known Issues
After flashing, verify your phone keypad is there. If its not, you will need to try doing a "Clear Memory" or Hard Reset. If that doesn't work, then reflash the rom. I'm trying to find the cause of this now.
It has been found that this camera patch will help improve the camera app in lower light conditions.
Official Download Sites for Crossbow Reloaded v1.7
I'll update this list with mirrors as they become available
PLEASE READ THIS
There are known issues with this rom on SOME phones. The obvious issue is after flashing you will not have a phone keypad. Those using ShellTool are finding they have to flash their devices twice. Most missing the keypad can immediately reflash the rom a second time and then its fine. If you have issues, the look through the thread and see if its been reported already. I'm working on rebuilding this, but since its working for some people, I'm not pulling the links. Your decision to download and flash this rom is YOUR decision. If the rom causes you issues, you were warned and it was your decision. Don't PM me about issues.
HTTP 1 and HTTP 2 (Thanks Eximius!)
There are also mirrors posted in posts 7 & 8 (not linked here by request of the owners). Thanks Kage Musha and TheWizzzard2203 for those!
RapidShare
Public Beta Release of 1.7.1
http://forum.xda-developers.com/showpost.php?p=1292376&postcount=219
Voice Command
MS Voice Command 1.6 US HERE and HERE and HERE
MS Voice Command 1.6 German HERE and HERE and HERE
MS Voice Command 1.6 FR HERE and HERE and HERE
MS Voice Command 1.5 UK HERE and HERE
Transcriber and more
The Black 3 Add-on CABs file has installable cabs for Transcriber, VoIP, Adobe Reader LE, and Windows Live & Messanger (slightly newer version than in Crossbow Reloaded v1.5). I've tested all of these on my Wizard and they work fine. Also included in this file is Cyberon VoiceCommander, Cyberon Voice Dial, VIjay555 utils, and a Slingbox patch (none of these I've tested). Since Adobe Reader and VoIP are in 1.7 you won't need those, but for those wanting Transcriber, just run the cab on your phone and you can scribble away on your screen
VoIP Setup Instructions
Thanks to joaosousa for the following steps!
!!! Only Tested in a Wifi network !!!
Install the wm6voip.cab.
Restart your Wizard (Soft Reset).
Go to Start > Programs > Accessories and open SIPConfig Aplication.
Insert your VoIP account information. (See example below)
Restart your wizard (Soft Reset).
Now you should be able to use VoIP, check the status of the service in the today screen.
SIPConfig configuration (VoipBuster account):
Service name: Voip
SIP Server: sip.voipbuster.com
UserName: my_voipbuster_user_name
Password: my_voipbuster_user_password
This didn't work? Then please check this thread:
http://forum.xda-developers.com/showthread.php?t=299950
GPRS / MMS Setups
Attached to this post is the cab file for Cingular users to setup GPRS and MMS.
For T-Mobile US users, here's a link to a post by FZZF that has info for your setup of GPRS and MMS:
http://forum.xda-developers.com/showpost.php?p=1250747&postcount=408
MMS auto config t-mobile.cab (Thanks to marscandybars for posting this)
German users check HERE
Greek users, Tna posted a cab for Greek Operators, or check HERE
Connecting WM6 to the Internet via ActiveSync 4.5 on Windows XP
For those having issues connecting to the internet via Active Sync, cut and paste this code onto your PC in a file called net_over_activesync.reg and run it (on your PC not your phone)
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Splash Screens and Splash Only RUU for G4
For G4 users, I've attached a zip file with the Splash Screens of this rom (since you don't get them when you use the shell tool). As I understand it, this is completely safe for a G4 as its nothing but splash screens (no OS, IPL, SPL, Extended ROM, etc, just splash and htc logo screens). I've also placed the .bmp files that make up the splash screen in the zip file so you can see them directly before flashing this. Before anyone asks, yes, the htc logo one is grainy. I had to do that due to size limitations of the file. I tried for a couple of hours to get a nicer version to work but it wouldn't display correctly (seems to have to be pretty low res / non-complex)
If you have problems flashing the above RUU on a G4, then extract this http://forum.xda-developers.com/attachment.php?attachmentid=29158&d=1152698784 and pull the nk.nbf file out of the above Splash Screen file and put it into the directory of this one and run this RUU. You can use the same method for flashing the Radio Only ROM (pull the nk.nbf file out of the radio only rom and put it into the directory of this RUU and run it). Thanks anichillus for that link!
Weather Panel Setup
See my post in the Wizard forum on how I setup WeatherPanel. It will give you a fixed dll with correct moon phases through 2008, new/better Moon phase icons, and a cool theme called Chameleon-240 QVGA. I dumped SBSH Pocket Weather after seeing this setup
More info to come, so check back here periodically!
.
Info on Included Apps
MobileJustice v0.8
MobileJustice is an Anti-theft app that you can configure on your phone. Just go to Start > Programs > Accessories and click on the MJConfig icon (first time in you will get a message that there isn't a config file, just click ok and it will be created). To us this, check the Enabled box, then click Add on the Allowed line. You can then setup your SIM card as an authorized one, and add other SIM cards IMSI numbers if you use more than one. Next click on Add next to Report to: and setup an SMS number (wife, friend, colleague) where you want the text message to go to if an unauthorized SIM is put into your phone. You can add multiple SMS numbers if you want. At this point, your phone will now be setup so that if an unauthorized sim is put in it, then it will send an SMS (with no record of it being sent) to your Report To list on the next boot (you can test this by not setting up (or removing) the Allowed and then doing a soft reset).
For more advanced, you can turn on the Disp MsgBox at the top and then put in some text in the MsgBox text line. This will pop up a Message box on the screen of the phone after a boot, if an unknown sim is in the phone.
You can also enable RMon (bottom half of the screen), put in a pass phrase, and then turn on MsgBox (GPS and LocCall do not work on Wizards, and the other options haven't been implemented in this version). By doing this, you can now send an SMS to your phone in the following format:
+m passphrase message
Rmon will intercept the sms message (so it will not show up as a received message), and if the passphrase matches the one you put in the configuration, then it will pop up a message box on the phone with your message in it (so you can secretly send messages to the thief to possibly intimediate them (or whatever).
The project page for MobileJustice is located at: https://sourceforge.net/projects/mjustice/
Thanx will flash in a few hours
Eelco
Could you give any info about available memory?
Hi and thank you! I've just flashed my QTek 9100 and everything is fine. Still can't activate VOIP from Comm manager even after configuring it with SIPConfig
But all other things are great!
Thank you again
Just flashed with the ROM. It looks nice so far. I haven't used Crossbow Reloaded before so I don't know the changes form earlier versions.
Here is a mirror for the people who dislike rapidshare like me Please do not share htis link outside these forums.
Hey mfrazzz, great work man. Got you a mirror:
Mirror
And please don't share this link outside the forums.
There ya go.
Cheers.
Thnx!
Will post few mirrors soon!
mirror here and here
Just flashed it, awesome ROM! Good call on changing the BatteryStatus, I had major drain issues with the newest version, also.
mfrazzz said:
All... I'm going back and forth on a couple of things. I put Office 2007 in the latest build I'm running. I'll probably keep it in, but its huge compared to Office 2003 (another 2meg larger it appears). I thought with the latest RomPacker kitchen I could get Office 2K7 and PocketXpdf back in, but that just won't happen. If I go back to Office 2003 then I can get PocketXpdf (or maybe even AdobeReaderLE) back in the rom. Comments?
Click to expand...
Click to collapse
escrimps said:
OK. I may be the only one voting this way, but I vote for office 2003.
Click to expand...
Click to collapse
I second the vote:
I know it's a lot of work building these ROMS but a Office 2003 version would be nice. Would it be hard to replace 2007 with 2003? You have the ROM built and I'm not talking about building a new one just making a change to the ROM you have.
The Vanilla Rom that Faria built was in part to reduce the amount of memory used.
Just my 2 cents, but thanks for listening.
Thanks for all your work from us that haven't ventured into the Kitchen.
FeedBack
So far so good...
Voip calls will only work after installing the wm6VoIP.cab
You can download it from here.
I have also installed ptravelAlarm, this is a great app that can be used to set your own alarms.
JPS
patryq said:
Could you give any info about available memory?
Click to expand...
Click to collapse
Ugh! Thats what I get for putting this out so late last night... I took a bunch of screen captures, then realized I needed to change something so reflashed again and lost all of that. I can't flash to a clean rom at the moment to get new captures, but after the flash there was 28meg free Program memory.
I'll update the first post with captures in a few hours.
@farrusete - Yep, thats what I figured on VoIP. Sorry, but I just couldn't seem to get past that.
@Kage and Wizzzard - Thanks for the mirrors, but I won't put those in the first post as that post tends to be posted in other forums
@Eximius - I'll update your mirror in the first post shortly
@nfollmer - thanks, and yes, major issues for me with the newer BS versions (it would just disappear off the screen sometimes)
@Cing 8125 - I'll consider a Office 2003 release, but it isn't quite as easy as you think since I completely replaced it with 2007. Would have to have a seperate code line (with how I have it setup now).
@joaosousa - Are you saying you have VoiP working? If so, please let me know the details so I can update the 2nd post with info. Thanks!
Voip
Yes, i have VoIP working.
I have just installed the wm6voip.cab i have posted in my previous post and after a restart i configured the SIP service using the SIPConfig Tool.
The only problem is that the sound comes out from the side speakers and not from the "normal call" speaker. But this seams to be a problem that all wizard's rom's have.
In SIPConfig i used my VoipBuster account.
Service name: Voip
SIP Server: sip.voipbuster.com
UserName: my_voipbuster_user_name
Password: my_voipbuster_user_password
I will install later on this afternoon. I need something stable mine is always locking up on me and I lose messages.
Hows A2DP working on this one?
mfrazzz said:
@Cing 8125 - I'll consider a Office 2003 release, but it isn't quite as easy as you think since I completely replaced it with 2007. Would have to have a seperate code line (with how I have it setup now).
Click to expand...
Click to collapse
Thanks, I was hoping it might be easy but no rush on my part if you do it.
Faria said he will release a v3. Maybe that would be a good time to do it. That is if you do your build again then.
faria said:
thanks guys for all coments and help.....i just cant find enougth hours in a day!!!! but as soon as i can i will release v3..... it is a total new rom.
Click to expand...
Click to collapse
Before installing this rom i have downgraded to an official rom from qtek.
After 3 hours of use i got 0 problems.
Sounds really good....I'll play with tonight also.
Thanks for the ROM
Junkie gotta Flash
Latest Update (25 June 21:07 GMT8)
Now that Beasty is offering "official" help and expertise on the VC component, we can look forward to improve the VC even further. I understand that you may encounter odd bugs while using the VCs and this is to be expected. The intention is to gather inputs for a more stable release soon. Cheers.
25 June 2008 - MAJOR Update
Version: EF 2.40 WWE WM6.1 Build 19900.1.0.3 + VC Ready Components
Pagepool 6.5MB for 64MB Unis (G4/G3)
As per advised earlier, the rom now offers Video Call option which can be enabled if you wish to use Video Telephony. BUT please consider this as a beta Release (on the VC part) because, like Beasty and Laurentius before me, I only managed to get VC running up to 70-80% with so many other possibilities unexplored. In fact after many sleepless night and red eyes, I am running out of ideas on how to get the VC build up to 100% - and with regard to this, I am sharing the very same Kitchen that I use to cook the roms with all the contents to those interested in doing further development on the VC part. The Kitchen is based on ThingsOnASpring and all credits should go to him.
Background:
The VC components have been ported over from Dopod 900 official rom 1.30 release in WM5 flavor. Apparently, our Uni will not aknowledge the later versions of Video Telephony dlls and drivers which I took from the official Athena WM6 and Tytn. I have tried all combinations to no avail (with the later version VC dlls).
Only with proper arrangement of WM5 VC Dlls, Intellidial and Camera components will the VC work properly on our Unis.
So, the end result is a forced entry of WM5 dlls into WM6.1 build. And because of this it is expected to behave somewhat oddly on certain functions (more about this later)
So how does it work:
Download the rom here:
Version: EF 2.40 WWE WM6.1 Build 19900.1.0.3 + VC Ready Components
After the first boot, to enable VC, go to Programs and click on Enable Video Call icon which will run a cab installer automatically. YOU NEED A SOFT RESET to activate the changes
IMPORTANT:
- Making a VC will trigger self dial (dial onto itself), just click answer and the dialer will continue to make the VC. Once connection is establish, if the VC interface is not shown to you, click on "Call Status" and you should see the two windows of both caller and recepient
- Ending a call or unable to establish 3G VC due to signal or other issues, the screen will show "Connected:" but do not panic, this is a small display bug and does not mean that you are connected to 3G network unecessarily
- Should the dialer pads become sluggish after a while, a soft reset may be required. But this happens very rarely.
And finally, for those interested to cook your own custom rom based on this build, please download the kithen here:
http://www.mediafire.com/?lecmcgmmmz2
The kitchen is ready to cook EF 2.40 release.
Again, thank you for your support and hope you guys will have fun beta testing the VCs. It's not perfect but at the very least provide a glimmer of hope of what to come.
PS:
If you find my handiwork to be useful and feels like buying me a drink, please PM me for Paypal ID.
UPDATE:
Video Telephony has been successfully integrated into the build I am using now.
In the next 24 hours I will be testing it extensively to see if there's any bug or issues.
We all know that previous efforts by WM6 chefs was fraught with difficulties, I expect mine to be no different. But at least the indication has been good so far. We shall see how this will fare later.
On the other hand, I may remove the inclusion of Ext Rom as usable drive due to the issue of storing email attachments.
Hope to get some good results soon.
Latest Update:
A friend of mine is using Uni G4 and he has been able to flash this rom successfully
Important UPDATE:
I just found out that my Uni is ACTUALLY A G3!. So this Rom will definitely work on all G3. Silly me, I didn't read the Wiki thoroughly enough to differetiate a G3 and G4 LOL!
If you are keen on 19900 WM6.1 in Vanilla flavors, please read on. I have just recently micgrated from O2 Xda Flame to Dopod 900 (HTC Universal) and have ever since been looking for a "stock" looking WM6.1 WWE. The readily available Vanillas seems to suffer from "excessive parts removal" to make them light and have suffered from odd behaviours on my aged G3. Since I am not new to Rom Cooking (my previous work can be found at www.xdaflameusers.com), I decided to cook my own WWE and the one I am using now seems to be quite a performer.
This ROM is build on four separate instances:
ThingsOnASpring Kitchen ->
Tomal's 7.7 19900 nk.nbf decoded and extracted ->
OEM Components deconstructed and removal of extras ->
SYS Components revised and HTC Official Kaiser WM6.1 WWE was used as filler to restore missing components ->
Reg Mods all over for performance and stability ->
Additition of minor HTC OEM components & drivers ->
Mo3ulla 2.15 (19588) nk.nbf used as target donor host ->
ThingsOnASpring XIP as the base XIP donor ->
RESULT:
EF 2.22 WWE 19900.1.0.3 Vanilla for G3 Universal (G4 not tested because mine is on G4)
Main attributes:
- Very stock looking
- 7.5MB Pagepool for 64MB Unis and FF Pagepool for 128 Unis (need someone to test this)
- Upon first boot, 40.XXMB of Storage and 26.XXMB of Memory
- Extended ROM already unlocked and ready for use - renamed as 10MB_Store. Update: I am looking into preventing clashes of SD card and Extended ROM for mail attachments
- Includes native support for both normal SD and SDHCs, SD Settings has been removed in favor of static SDHC components which will read/write both normal SD and SDHC. This has been rigorously tested with my 8GB Sandisk MicroSDHC (with SD adapter) and Kingston 4GB SDHC Class4. Both performs flawlessly tested using Windows Media Player with over 1000 songs on high bitrate MP3s. Using the old SDHC drivers, pause gaps between songs was around 5-6 seconds but now the gap has been reduced to 3-4 seconds
- Includes HTC Network Wizard for easy 3G/GPRS setup
- Grayscale BG for CommManager with all Stock features restored
- Runs perfectly with Radio 1.18
- Exchange Push Mail fully tested on 3G/GRPS - worked flawlessly
- Excellent synergy with SPB Mobile Shell 2.0 and Pocket Plus 4
- .NET CF3.5 installed and confirmed running perfectly
- Games, Transcriber, Schap VOIP, OneNote & Windows Live etc removed
- Registry cleaned of excess traces
- No FDISK/RAMDISK included for stability sake
- Proven stability with 3G/GPRS always on & Activesync in background with Microsoft DirectPush. On top of that with SPB Shell, SPB Finance, Windows Live and Pocket Plus running back to back
Downloads:
EF 2.22 19900.1.0.3 64MB Unis (Pagepool 7.5MB)
EF 2.22 19900.1.0.3 128MB Unis (Pagepool FF)
Note:
Before you flash, it's a good idea to blank out your Extended ROM to avoid complications. Default HTC Autoinstall from extended rom has been known to cause system freeze on first boot
If you are new to flashing, I highly recommend reading the Universal Wiki - the Wikis has been a great help to me when I first started over 2 weeks ago
Credits:
Of course, this has been possible due to the the hard works of Tomal, Mo3ulla, ThingsOnASpring and many more before them. They deserve all the credits where applicable.
Disclaimer:
There's always risk with cooked roms flashing. Do this at your own discretion and do it only if you are absolutely certain of your intent
Thanks & enjoy!
MMS
Hi there org kampung
before i flash this ROM just want to confirm if you haven't excluded the MMS because i used it alot since VC is not applcable for WM6. Thank you.
**ohh before that do you know where i can upgrade my UNI to 128 RAM here in KL & how much shal it cost me??
nyok80 said:
Hi there org kampung
before i flash this ROM just want to confirm if you haven't excluded the MMS because i used it alot since VC is not applcable for WM6. Thank you.
Click to expand...
Click to collapse
Alo bro. Yes MMS from Acrosoft is included....forgot to mention
PS:
I am in the process of looking for supplier for the chips first. most likely Farnell Newark in PJ will have them (or can bring them in)
This rom for G3?
Many thanks!
0979720384 said:
This rom for G3?
Many thanks!
Click to expand...
Click to collapse
Pal....EFN indicated his Vanilla build support G4 only.
Maybe works for G3
bramblyrose said:
Pal....EFN indicated his Vanilla build support G4 only.
Click to expand...
Click to collapse
what I understand is "not tested on G3" which doesn't mean "not supported", the ROMS used for cooking this one are both G3/G4
EFN said:
Alo bro. Yes MMS from Acrosoft is included....forgot to mention
PS:
I am in the process of looking for supplier for the chips first. most likely Farnell Newark in PJ will have them (or can bring them in)
Click to expand...
Click to collapse
Good to see that are more Malaysian developer. Looking forward to have a Malaysian shop that can solder/upgrade our UNI to 128mb + reasonable price. Keep us posted dude.
0979720384 said:
This rom for G3?
Many thanks!
Click to expand...
Click to collapse
Why dont u just try it? u can always revert back to your trusty old rom if failed.
Yes, the base roms used to construct this one has been known to support G3. I see no reason it should not work with a G3. BUT I have never tested this build on a G3 because I don't have one. Any takers?
Thanks
Wow, let me check this one out then i will tell you what will happen to my exec G3. Anyway, thanks a lot for a new cooking that makes me so curious.
Important UPDATE:
I just found out that my Uni is ACTUALLY A G3!. So this Rom will definitely work on all G3. Silly me, I didn't read the Wiki thoroughly enough to differetiate a G3 and G4 LOL!
satanisme:
All we need to do now is get the 128 chips. There's a lot of handphone repair shops at Lowyat plaza that can do hot blower soldering with the proper tools. Of course we will have to tell them precisely which chips to take out and what to solder in
Can you confirm how you got you email attachments to the storage card. The messaging options only sees the 10_MB storage?
wow, what a great rom. i'm using it right now....
DanT said:
Can you confirm how you got you email attachments to the storage card. The messaging options only sees the 10_MB storage?
Click to expand...
Click to collapse
DanT, thanks for the feedback. I may have made aq mistake here in this particular regard. You are right about attachments getting saved in Ext rom (10MB_Storage) instead of SD card. But no worries, I am in the process of working a fix on this. Stay tuned
madmonkey & the rest:
Thanks buddies, ping me if you see any issues okay. I am gathering feedbacks now for an upcoming update to this version.
EFN said:
DanT, thanks for the feedback. I may have made aq mistake here in this particular regard. You are right about attachments getting saved in Ext rom (10MB_Storage) instead of SD card. But no worries, I am in the process of working a fix on this. Stay tuned
madmonkey & the rest:
Thanks buddies, ping me if you see any issues okay. I am gathering feedbacks now for an upcoming update to this version.
Click to expand...
Click to collapse
Thanks, apart from that issue it looks like a great ROM. I eagerly await your update.
EFN said:
DanT, thanks for the feedback. I may have made aq mistake here in this particular regard. You are right about attachments getting saved in Ext rom (10MB_Storage) instead of SD card. But no worries, I am in the process of working a fix on this. Stay tuned
madmonkey & the rest:
Thanks buddies, ping me if you see any issues okay. I am gathering feedbacks now for an upcoming update to this version.
Click to expand...
Click to collapse
If you renamed the extended ROM to anything whose first letter was alphabetically greater than capital S (from "Storage Card") wouldn't do?
Just a thought...
Cheers!
Carlos
Quick question
Does the ROM contain the RGUs?
If it does, this may be a better base for me to use with the Diamond addons, rather than Ranju's 19900 build...
-PJC
pjc007 said:
Does the ROM contain the RGUs?
If it does, this may be a better base for me to use with the Diamond addons, rather than Ranju's 19900 build...
-PJC
Click to expand...
Click to collapse
The rgus are not included in the rom itself due to over 1.15MB size added if they are not deleted. But I can share the ones still in OEM & SYS of the kitchen I use. Anyway I am in the habit of modifying the output hv files (Default.hv & User.hv) directly just before cooking so the rgus may only reflect 80% of the actual mods done. If you extract this rom, just before you pkg them into SYS and OEM, grab the hv files and convert them into master rgus.
casouzaj:
Yes I am thinking of testing this out. Thanks for the input
EFN said:
The rgus are not included in the rom itself due to over 1.15MB size added if they are not deleted. But I can share the ones still in OEM & SYS of the kitchen I use. Anyway I am in the habit of modifying the output hv files (Default.hv & User.hv) directly just before cooking so the rgus may only reflect 80% of the actual mods done. If you extract this rom, just before you pkg them into SYS and OEM, grab the hv files and convert them into master rgus.
Click to expand...
Click to collapse
OK - thanks - I'll download & extract & give that a go...
-PJC
A very nice and stable ROM. I am using it now happily. Even the phone hangs once in an outgoing call and i have to soft reset. Gazak Allah Khayran dear EFN.