Database Info

Swedish characters on keyboard

Since I had severe problems getting the swedish characters to work after upgrading to WM6 (Pandora 3.2) I thought I'd provide the other swedes here with my sollution.
For the hardware keyboard:
Open a registry editor and locate
HKCU >> ControlPanel >> Keybd
Change the string from 0409 to 0414 and save.
Turn the wizard off by using the power button. Do no soft reset. If you soft reset sometimes the registry is not saved.
Turn the wizard on. You should now have swedish characters.
The value 0409 is for english. I could not get it to work by replacing it with 041d which is the code for Swedish according to Microsoft (all country codes can be found here http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx )
However, one user in the forum used 0414 which is really Norwegian_Bokmal but they also use å, ä and ö. Tested this and it worked.
Some threads tell you to also change the value in two other places:
HKCU >> keyboard layout >> Preload >> 1 >> Default and
HKCU >> keyboard layout >> Preload >> Default
Do not change these settings. It will do nothing except disabling the auto complete function. I also encountered problems starting the wizard after changing these settings.
To get swedish characters on the onscreen keyboard I installed SkandinaviskTastatur5 which can be found here:
http://forum.xda-developers.com/showpost.php?p=1150091&postcount=97
Hope this helps!

thanks.
Good job.
Just helped a friend.
Daniel

I dont understand how to change the langue on the harwere keyboard, plz help me!! // Michael

Tackar! Usally I use Registry Wizard for this, but with this method I don't have to install any 3:d-part programs

Perfekt!
Tack för hjälpen

Didnt work for me.
I tryed this at my Kaister with 6.1 but it didnt work. did try both 0414 and 041d.

For the hardware keyboard the only way I've ever got it to work is by using a proggie called "skandinavisk tastatur". Comes as a .cab- just install and it lets you choose which nordic keyboard layout to use. It's a bit tricky to track down (I think it is freeware though), but nothing half an hour on google will fix

Carrotcake said:
For the hardware keyboard the only way I've ever got it to work is by using a proggie called "skandinavisk tastatur". Comes as a .cab- just install and it lets you choose which nordic keyboard layout to use. It's a bit tricky to track down (I think it is freeware though), but nothing half an hour on google will fix
Click to expand...
Click to collapse
About 30sec google, here you go: http://www.idedata.no/programmer/progredirector.asp?ID=581&type=mips
But I like the sulotion in the first post more

Thank you so much for the information, I've been looking for a way to get Scandic letters working for quite some time now. Finally I can use my Wizard normally.
I can also confirm that this works for Finnish. As stated in the first post, just navigate to HKCU - ControlPanel - Keybd and change "Locale" to "0414", hard restart via the power button and you're done.

HEJ
JaX3RiR said:
Thank you so much for the information, I've been looking for a way to get Scandic letters working for quite some time now. Finally I can use my Wizard normally.
I can also confirm that this works for Finnish. As stated in the first post, just navigate to HKCU - ControlPanel - Keybd and change "Locale" to "0414", hard restart via the power button and you're done.
Click to expand...
Click to collapse
in fact, i suggest you to use the EZIMPUT from cracing, there is swedish as well.
i have a wizard with swedish characters on keyboard, if you want i can take a shot and send via email to you, so you can easily figure how to "design2 the characters on your keyboards....
Jag kan inte pråta på svensk, med jag vill hjelp (hope is the correct way to write in swedish)
Vi ses

QWERTZ (german) keyboard in WM6

Is there any way to get my my german keyboard-layout back after
an upgrade to the V5 WM6-rom?
It just drives me crazy to no longer find most keys
and to be unable to type Umlauts at all.

http://rapidshare.com/files/30744168/deutsch_wm6_.cab
install and look ...

Or do it by hand:
a)Fire up your favorite registry editor on the PDA (like Resco)
b) Open this Key:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
c) change "Layout" to (decimal):
66567

Mjammjam said:
Or do it by hand:
a)Fire up your favorite registry editor on the PDA (like Resco)
b) Open this Key:
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Qwerty]
c) change it to (decimal):
66567
Click to expand...
Click to collapse
Thanks a lot!
Umlauts are still in the Nth instead of the first position on
the symbol key but at least I can type normaly again .

MarcusWolschon said:
Thanks a lot!
Umlauts are still in the Nth instead of the first position on
the symbol key but at least I can type normaly again .
Click to expand...
Click to collapse
just edit the /windows/sym.txt file and set the umlauts to first position.

Instead of the 66567 (which is 10407 hex) you can also use 132103 (20407 hex). Don't know the differences. But 0407 is the country code for Germany.
For manual dictionary installation, copy the contents of the attached zip file to your \WINDOWS directory on your device and change the following registry key:
[HKLM\SOFTWARE\Microsoft\Spell Check]
Main_Dict="\windows\mssp2_ge.lex"
I also attached my personal sym.txt (with many added symbols).
Cheers,
-mARKUS

{Solved} Kaiser harware keyboard keys remapping

All keyboard layouts are hardcoded in keypad.dll.
Look any any hex editor at offset 0x1d8c0 (in current version of this dll, but can be easily found in newer released - see screenshot).
It contains national characters in unicode (like russian ones), FN+ combinations, etc.
Now you can map keys the way you like.
Hi! Does anybody know how to remap keys in english layout the way you like (for example, dvorak layout?) Also I would like to change some FN+key to my very own. I know there is AEKMap software, but I'm curiuos is it possible to make it editing some files (dll or configuration or registry) and flashing them with ROM (or just overwriting in \windows folder). The first and simplest task to start with I would like to remap FN+Q to print @ symbol (instead of !), and FN+W to print ! symbol (instead of @). Who knows how to do that?
p.s.: and what cwslayout=1 registry key is actually for? i've googled for "CWSLayout" and found nothing but links to our forum

[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"CurLang"=dword:0000040c
"CWSLayout"=dword:00000000
this is for french vesion, so "CurLang"=dword:00000409 is for english, and "CurLang"=dword:00000804 is for CHS, OK, change it to what ever you want.

i'm not talking about layouts... I'm talking about mappings. imagine i want to make a dvorak mappings for wm. this is what i need to do... imagine i've opened my device, and changed all keys in hardware- so instead of qwertyuiop you will see poiuytrewq for example. and want WM also print correct characters as i made in my new hardware keyboard...

updated first post

qooqoo said:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"CurLang"=dword:0000040c
"CWSLayout"=dword:00000000
this is for french vesion, so "CurLang"=dword:00000409 is for english, and "CurLang"=dword:00000804 is for CHS, OK, change it to what ever you want.
Click to expand...
Click to collapse
HI I am not a expert in that so can help me.
I have got the duttty's ROM whitch is in english with a qwerty keyboard and I 'd like to get a french keyboard does it exist a cab for that ? If not can you explain to me how to do ??
Thanks

Nice research and finding, mate....
Very ussefull to flash WWE in non english Kaiser and go back to localized mappings for the hard keybd
Cheers...
JugglerLKR said:
All keyboard layouts are hardcoded in keypad.dll.
Look any any hex editor at offset 0x1d8c0 (in current version of this dll, but can be easily found in newer released - see screenshot).
It contains national characters in unicode (like russian ones), FN+ combinations, etc.
Now you can map keys the way you like.
Hi! Does anybody know how to remap keys in english layout the way you like (for example, dvorak layout?) Also I would like to change some FN+key to my very own. I know there is AEKMap software, but I'm curiuos is it possible to make it editing some files (dll or configuration or registry) and flashing them with ROM (or just overwriting in \windows folder). The first and simplest task to start with I would like to remap FN+Q to print @ symbol (instead of !), and FN+W to print ! symbol (instead of @). Who knows how to do that?
p.s.: and what cwslayout=1 registry key is actually for? i've googled for "CWSLayout" and found nothing but links to our forum
Click to expand...
Click to collapse

qooqoo said:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
"CurLang"=dword:0000040c
"CWSLayout"=dword:00000000
this is for french vesion, so "CurLang"=dword:00000409 is for english, and "CurLang"=dword:00000804 is for CHS, OK, change it to what ever you want.
Click to expand...
Click to collapse
Hi,
sorry but what is CHS
Keep up the pressure !!

gijo1 said:
Hi,
sorry but what is CHS
Keep up the pressure !!
Click to expand...
Click to collapse
Simplified Chinese characters

i'm going to take my first step into hex editing. can you recommend hex editor freeware and setup-free ?

JugglerLKR said:
All keyboard layouts are hardcoded in keypad.dll.
Look any any hex editor at offset 0x1d8c0 (in current version of this dll, but can be easily found in newer released - see screenshot).
It contains national characters in unicode (like russian ones), FN+ combinations, etc.
Now you can map keys the way you like.
Hi! Does anybody know how to remap keys in english layout the way you like (for example, dvorak layout?) Also I would like to change some FN+key to my very own. I know there is AEKMap software, but I'm curiuos is it possible to make it editing some files (dll or configuration or registry) and flashing them with ROM (or just overwriting in \windows folder). The first and simplest task to start with I would like to remap FN+Q to print @ symbol (instead of !), and FN+W to print ! symbol (instead of @). Who knows how to do that?
p.s.: and what cwslayout=1 registry key is actually for? i've googled for "CWSLayout" and found nothing but links to our forum
Click to expand...
Click to collapse
I have no idea about what CWSLayout really mean, but it's just solved the problem of "FN+Q to print ! ...". I got FN+Q to print @ since I set CWSLayout to 0.

Same problem
gijo1 said:
HI I am not a expert in that so can help me.
I have got the duttty's ROM whitch is in english with a qwerty keyboard and I 'd like to get a french keyboard does it exist a cab for that ? If not can you explain to me how to do ??
Thanks
Click to expand...
Click to collapse
I also have dutty's rom which is in English, but my Kaiser hardware was bought in HK, meaning the original OS was in Traditional Chinese. Whenever I type Fn+S, do not print _ , but print " , i want to fix it so that i type Fn+S Kaiser can print _, just like the keyboard shows.

bruxe said:
I have no idea about what CWSLayout really mean, but it's just solved the problem of "FN+Q to print ! ...". I got FN+Q to print @ since I set CWSLayout to 0.
Click to expand...
Click to collapse
im gonna take a stab at it and CWS probably stands for Cingular WirelesS... Even though its now att the CID is still CWS
SO, if you dont have an ATT tilt, then i would suggest either setting that string to 0, or deleting it!

I think that I have the same problem.
I am completly new to this, and I appreciate any help.
I live and work in China, and I just bought an HTC TYTN II (it is the Taiwan version) and some of the keys are different from my friend's Vodafone 1615. I am trying to figure out how to flash the phone into English, and it seems that when I will do that, that some of the keys will not do what is printed on the key itself. Can anyone tell me what to do? Is there a specific English Rom flash for my phone, or will I need to learn how to re-map the keys after I flash it to English, or should I just take the phone back (My phone is still brand new.) and trade it for the Vodafone 1615? I like the look of this TYTN II that I picked out better, but if I am going to have to put up with keys which don't match correctly, then I prefer to just trade it for the Vodafone.
Thanks for any help.

but it's just solved the problem of "FN+Q to print ! ...". I got FN+Q to print @ since I set CWSLayout to 0.
Click to expand...
Click to collapse
I had a similar problem, just that FN+Q would print @ and not ! even though ! was what was printed on the keyboard.
i didnt find a CWSLayout string so i made one and set it to 1 and now it finally shows up on the screen just like how its printed on the keyboard.

bruxe said:
I have no idea about what CWSLayout really mean, but it's just solved the problem of "FN+Q to print ! ...". I got FN+Q to print @ since I set CWSLayout to 0.
Click to expand...
Click to collapse
shogunmark said:
im gonna take a stab at it and CWS probably stands for Cingular WirelesS... Even though its now att the CID is still CWS
SO, if you dont have an ATT tilt, then i would suggest either setting that string to 0, or deleting it!
Click to expand...
Click to collapse
Hi, bringing up the old post, but it might shade some light for others with similar issues:
I have a QWERTY layout, but it appears that although "Y" was in its place - some of the "Fn+" characters were not:
Q W E R T Y
@ ! ? / # 1
As I see from the posts above - you guys has "!" mapped to "Q".
Now - on my Kaiser, although with English layout, the Function + characters are mapped differently. And you have the paramenter CWS set as 1?
I had it also, and I mistyped most of my Fn+ characters (Fn+Q = ! instead of = @ and so on...).
(thanks to you and these posts) I set CWSLayout=0, and did a soft reset.
Now - I have an @ in place of Q and all the other characters mapped according to my hardware keyboard.
Once again - thanks.
p.s. - I just wanted to "elaborate" a bit more for the guys with this issue so it could be more clear...

Make $100! I need a 20 languages t9 cab file

Hi there..
I know I can install a single language with a t9 cab file. But what I need is installing many languages in a single go. They are used on the Imate SPL.
I have quite a few Imate SPL phones to sell and installing single languages takes a lot of my time, so a single big file would save me trouble. I could install all languages seperately with Active Sync, but then I need something that can adjust the registry so that they are all available from the t9 menu, now only the last one installed shows.
I use all the languages from this page, from Czech to Turkish (no Chinese)
http://melgurth.ovh.org/index.php?page=downloads
Only for Portuguese I use another one, because the one from the page doesn't work. I use this one:
http://rapidshare.com/files/71913751/t9_Eng-Portug.rar
Of course I don't want to be a free rider, so the first to make me a fully working multi language .cab file or a proper registry edit thingy gets $100!
Maybe it already exists, well that is also worth it to me, let me know please.

adriaanb said:
Hi there..
I know I can install a single language with a t9 cab file. But what I need is installing many languages in a single go. They are used on the Imate SPL.
I have quite a few Imate SPL phones to sell and installing single languages takes a lot of my time, so a single big file would save me trouble. I could install all languages seperately with Active Sync, but then I need something that can adjust the registry so that they are all available from the t9 menu, now only the last one installed shows.
I use all the languages from this page, from Czech to Turkish (no Chinese)
http://melgurth.ovh.org/index.php?page=downloads
Only for Portuguese I use another one, because the one from the page doesn't work. I use this one:
http://rapidshare.com/files/71913751/t9_Eng-Portug.rar
Of course I don't want to be a free rider, so the first to make me a fully working multi language .cab file or a proper registry edit thingy gets $100!
Maybe it already exists, well that is also worth it to me, let me know please.
Click to expand...
Click to collapse
i dont think this is a problem
or you may chang your ROM,this is a better way
add input changer in your settings, cpl.xml control it
Find what`s difference in the cab:
reg:
[HKEY_LOCAL_MACHINE\T9 Input Method\IME]
"0400"="t9AW.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method]
"Current IME"="0400"
"Current LDB"="0405"
"Default Alpha LDB"="0405"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Ime File"="T9Ime.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\LDBs]
"0405"="T9CzechLdb.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\LDBS]
"0405"="t9 Czech"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\Languages]
"Available"="0405"
you can chang it to:
[HKEY_LOCAL_MACHINE\T9 Input Method\IME]
"0400"="t9AW.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\0405]
"Current IME"="0400"
"Current LDB"="0405"
"Default Alpha LDB"="0405"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Ime File"="T9Ime.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\LDBs\0405]
"0405"="T9CzechLdb.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\LDBS\0405]
"0405"="t9 Czech"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\Languages\0405]
"Available"="0405"
and other reg
.....
.....
FILES:
t9 czech.cab:
T9AW.dll 47kb
T9AWEngine.dll 154KB
T9IME.dll 82kb
T9ImeRes.dll 10kb
T9imePrefs.dll 29kb
T9CzechLdb.dll 122kb
T9ImeRes.Dll.0405.mui 11kb
t9 Danish.cab:
T9AW.dll 47kb
T9AWEngine.dll 154KB
T9IME.dll 82kb
T9ImeRes.dll 10kb
T9imePrefs.dll 29kb
T9DanishLdb.dll
T9Imeres.Dll.0406.mui
t9 English.cab
t9 Portuguese.cab
.....
.....
you see,just the two files are different
or you can send me a ROM you use,i will try..

Easy
lovebabyjing said:
i dont think this is a problem
Click to expand...
Click to collapse
Thats true!
If he really give 100 US$ to that person who did that 30min work that would be a easy earned money! ;o)
If you want to - I can do it for you!

[How To] Change XT9 dictionary

I have seen a lot asking how to change the XT9 dictionary to a language not listed. After having a hard time finding a solution myself i decided to write this guide.
If you are using a ROM with another language than the language you want your XT9 dictionary to be and that dictionary language isn't in the XT9 language menu, don't worry. All you need to do is adding a few things in the registry.
First go to:
HKEY_LOCAL_MACHINE\Software\Tegic\eT9\
Open the key:
AvailableLanguages
In this you will see a Value like:
0109,010C,0107,0110,010A
These are the langues (you currently) can choose between. Add the language you want to use, ex. danish is 0106:
0106,0109,010C,0107,0110,010A
Here's a list of most of the dictionary codes (sorry i don't know all of them, if anyone got a complete list be free to reply with a link or the list and i'll add it):
0101 = Arabic
0105 = Czech
0106 = Danish
0107 = German
0108 = Greek
0109 = English
010A = Spanish
010B = Finnish
010C = French
0110 = Italian
0113 = Dutch
0114 = Norwegian
0115 = Polish
0116 = Portuguese
010e = Hungarian
0118 = Romanian
0119 = Russian
011B = Slovak
011D = Swedish
011F = Turkish
Unknown = Serbian
Next go to:
HKEY_LOCAL_MACHINE\Software\Tegic\eT9\LdbFiles\
Add a new string value with the name of the language you want to add (ex 0106 for danish). Then in value add the filename of the dictionary you want to link the language to. Here's a list of the dictionaries in the WWE 1.61 ROM (my guess of languages in parentesis):
ARlsUN_xt9.ldb (Arabic)
CSlsUN_xt9.ldb (Serbian)
DAlsUN.ldb (Danish)
DElsUN_xt9.ldb (German)
ELlsUN_xt9.ldb (Greek)
ENlbUN_xt9s.ldb (English)
ESlsUN.ldb (Spanish)
FIlsUN.ldb (Finnish)
FRlsUN_xt9s.ldb (French)
HUlsUN_xt9.ldb (Hungarian)
ITlsUN.ldb (Italian)
NLlsUN_xt9.ldb (Dutch)
NOlsUN.ldb (Norwegian)
PLlsUN_xt9.ldb (Polish)
PTlsUN_xt9.ldb (Portuguese)
ROlsUN_xt9.ldb (Romanian)
RUlsUN_xt9.ldb (Russian)
SKlsUN_xt9.ldb (Slovak)
SVlsUN.ldb (Swedish)
TRlsUN_xt9.ldb (Turkish)
After adding the value, soft reset your phone and you can now choose the language you added in the XT9 menu.
Should you still experience minor problems, like freezes, slow dictionary, etc., try this. Go to:
HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\LanguageKeyBoardIDMapping
Take the dictionary code you just added, and replace the FIRST 2 digits with 09. For example if you added 0106, you change that to 0906. Now add a new string value, name it the original code, ex. 0106 and as value you input the 09 value, ex. 0906 (Thanks to bel_z_bub).
26/03/10 - Added the missing dictionary codes!

hi,
is there any ways to add entries to the dictionary? I cant find the eT9MyWords.exe anywhere..

Very good tip. Working for Romanian.
Thank you!

idestiny said:
hi,
is there any ways to add entries to the dictionary? I cant find the eT9MyWords.exe anywhere..
Click to expand...
Click to collapse
You should have eT9MyWords.exe in the Windows folder. At least mine is there.
savagemari said:
Very good tip. Working for Romanian.
Thank you!
Click to expand...
Click to collapse
Glad it's working

how do I dissable he xT9?? I dont really using it in my language.. coz my finger keeps on accidentaly pressing xT9 and ABC

Hungarian language code for xt9: 010e

Romanian 0118

I already posted something like that here guess I should have made a topic about it..
but it kept crashing/not working sometimes (well, three times total since) and after some more searching I think you also must add a value to:
HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\LanguageKeyBoardIDMapping
for Dutch I added a new string value named 0113 with a value of 0913
just take the last two numbers/letters of your languages code and put 09 in front of it..
there might be more that need to be changed.. I'm still testing this change as I just found out..

SK is Slovak (not slovakian )

bel_z_bub said:
I already posted something like that here guess I should have made a topic about it..
but it kept crashing/not working sometimes (well, three times total since) and after some more searching I think you also must add a value to:
HKEY_LOCAL_MACHINE\Software\Tegic\eT9\Sip\LanguageKeyBoardIDMapping
for Dutch I added a new string value named 0113 with a value of 0913
just take the last two numbers/letters of your languages code and put 09 in front of it..
there might be more that need to be changed.. I'm still testing this change as I just found out..
Click to expand...
Click to collapse
The error you describe on the other post happened on mine with original ROM as well without changing XT9, so far i haven't experienced it after instaling WWE ROM and changing it to Danish XT9 dictionary.
Should i experience it, then as i say it's just like with the original ROM, it's not a sideeffect of doing this.
From the name of the folder you listed above, i guess that just for using other keyboardmappings, with different languages. Unless you have another alphabet (not ABC) i guess it's not needed to add.

20mihalko said:
SK is Slovak (not slovakian )
Click to expand...
Click to collapse
Thank you Updated.

AeroByte said:
The error you describe on the other post happened on mine with original ROM as well without changing XT9, so far i haven't experienced it after instaling WWE ROM and changing it to Danish XT9 dictionary.
Should i experience it, then as i say it's just like with the original ROM, it's not a sideeffect of doing this.
From the name of the folder you listed above, i guess that just for using other keyboardmappings, with different languages. Unless you have another alphabet (not ABC) i guess it's not needed to add.
Click to expand...
Click to collapse
From the keys in that folder listed above, you might guess windows is missing a value when you change languages as all the original languages are there. Seems like it's only logical to add your new values there as well don't you think? The same keyboardmapping or not, windows apparently needs a value when you change languages. Why would all the values be different if it's the same mapping?
The crashes occured when I changed language from dutch to english and back to dutch again when typing. And after a night of hardcore testing with the new keyboardID, it hasn't crashed anymore.
o yeah. I think SV is Svenska (Swedish) but not sure..

I think that "ELlsUN_xt9.ldb" stands for Greek (=ELLINIKA in greek).
If you can find the code then we can also use the Greek Dictionary...

AeroByte, where did you get the WWE 1.61 ROM ? Did it come on your device ? Is this an official ROM ? Could you post a link from where I could get it ?
Thanks

tripolaris said:
I think that "ELlsUN_xt9.ldb" stands for Greek (=ELLINIKA in greek).
If you can find the code then we can also use the Greek Dictionary...
Click to expand...
Click to collapse
Greek should be 0108 if I am correct.
Use this page: http://www.science.co.il/language/Locale-Codes.asp?s=country
All 04 must be changed to 01 (i.e. 0408 to 0108, etc).

MateiF said:
AeroByte, where did you get the WWE 1.61 ROM ? Did it come on your device ? Is this an official ROM ? Could you post a link from where I could get it ?
Thanks
Click to expand...
Click to collapse
There's only an official 1.61 ROM out in WWE/Russian. (You can get everything in Russia )
I'm using a cooked 1.61 ROM from kwbr, the maker of Topix. You can find it here:
http://forum.xda-developers.com/showthread.php?t=595318

bel_z_bub said:
From the keys in that folder listed above, you might guess windows is missing a value when you change languages as all the original languages are there. Seems like it's only logical to add your new values there as well don't you think? The same keyboardmapping or not, windows apparently needs a value when you change languages. Why would all the values be different if it's the same mapping?
The crashes occured when I changed language from dutch to english and back to dutch again when typing. And after a night of hardcore testing with the new keyboardID, it hasn't crashed anymore.
o yeah. I think SV is Svenska (Swedish) but not sure..
Click to expand...
Click to collapse
Well, i dont have the value added and i still haven't experienced it. But now people can read it if they experience the same.

erdoke said:
Greek should be 0108 if I am correct.
Use this page: http://www.science.co.il/language/Locale-Codes.asp?s=country
All 04 must be changed to 01 (i.e. 0408 to 0108, etc).
Click to expand...
Click to collapse
Yeah i assumed that, but as i couldn't verify it, i wouldn't just assume it

Tnx this should be a sticky!

AeroByte said:
Well, i dont have the value added and i still haven't experienced it. But now people can read it if they experience the same.
Click to expand...
Click to collapse
Allright have it your way, but I think the guide is incomplete like this.. it seems only logic to add the value.. just like you added it to the AvailableLanguages key.. and I wrote a ton of messages today english and dutch and haven't had any problems anymore..