Related
Recently i started to use activesync to share internet connection over BT with my pc, it works fine, though i have two questions:
first one is the synchronisation wizard that pops up immediatly after my wizard connects. i've noticed that i need to close it for net link to be established. I'd like to disable it somehow, so that i don't need to get anywhere close to my PC to connect, it's quite annoying. I even tried to capture the AS window with my own software to close it, but was unable to recognize it properly. any chance to do it?
other thing is, when i use usb to sync with AS, i am able to acces lan resources with total commander. I was hoping i can do the same with BT connection, but so far i was unable to locate the proper solution for this idea... would be cool if i had it working, i used to do it over wifi, but i prefer using BT now, help anyone...
thanks in advance guys
Still nothing, i'm stuck with this problem, would be grateful for any solution
Life can be so cruel...
So just for your information guys, problem is solved. though im rather mad about it, as it happened an ugly way;]
so i;ve finally managed to create an application that captures proper Activesync windows and closes synchronisation wizard, so that my xda establishes connection without me even touching desktop pc. thats fine. i just couldn't remember where in registry to place my app so that it opens when i connect (i don't like the idea of my program just sitting in windows tray all the time), the idea is cool, it's almost finished, i go google. "activesync registry"
first result is this...
http://www.pocketpcfaq.com/applications/undocumentedactivesync.htm
you can't imagine how angry i get... ;]
anyway, there's no need for my program to exist, i just change/add one registry value, thats it...
just why couldn't i find it for over a month, and i did right after i found another way to solve it??? life sucks ;]
ok so I have a cingular 8125 which i CID unlocked and SIM unlocked. I have the T-mobil 2.26 as a ROM base and was running black dimond 1.0 touch ROM with no syncing prolbems. This past weekend my phone froze and i wasnt able to reset it, so i re flashed my base rom. I then tried to Flash the new dimond 2.0 touch rom and it flashed fine, but when i went to sync it up all it did was say it was syncing. I let it run over night and it was in the same state (saying it was syncing) that i left it in. I tried flashing another custom rom but ended up with the same result. I tried deleting active sync 4.5 and re-installing, and even tried a beta version of 4.5 but nothing has worked. PLease any help would be much appreciated. Thanks in advanced.
could be outlook...outlook sometimes acts finicky...
recommendation would be to save your pim information...it's usually in some sort of personal folder, and then reinstall outlook. Move your pim information back and resync.
I had this same problem, but i fixed it.
I had this same problem using Diamond 1.1, so i thought it was the rom, but....Then, I used Octavoi, and I had the same problem, so i figured it was Windows Vista's Device Center (replaces ActiveSync), but... Then I found out that it stilled synced fine on my XP laptop (ActivSync 4.5), so.... i woke up one night and suddenly decided to remove my USB hub that my phone was connected through, and then I directly connected my phone to my computer (which actually gives it a direct undivided power source, it seems). After this, it synced in 4 minutes, and i finally got all my contacts back. Could this possibly be your case as well? That's all i can offer.
nope im this isnt my prolbem. and i cant find that folder that you were talking about on out look either. i tried flashing a bunch of diff roms but all it does is say its syncing and then my comp sends nothing? any more ideas would be greatly appreciated. thanks
martystoked said:
nope im this isnt my prolbem. and i cant find that folder that you were talking about on out look either. i tried flashing a bunch of diff roms but all it does is say its syncing and then my comp sends nothing? any more ideas would be greatly appreciated. thanks
Click to expand...
Click to collapse
Hi,
try to disconnect firewall or antivirus programs.
tried it. i acutally just tried syncing on another computer and it works. any thoughts on why it wont work for my comp, when it did before?? or how to transfer my contacts from one comp to another so i can at least get them on my phone??? thanks guys
martystoked said:
tried it. i acutally just tried syncing on another computer and it works. any thoughts on why it wont work for my comp, when it did before?? or how to transfer my contacts from one comp to another so i can at least get them on my phone??? thanks guys
Click to expand...
Click to collapse
Use PIMBackup, it saves and restores that information and more (which you can choose from)... i think it's free, it came with my ROM (Octavaoi 4.5), so u might search for it.
i would uninstall some stuff with your phone unplugged and reboot it then reconnect it and make sure that the usb cord or jack is working
Betcha I had it worse...
I'm a total newb to this stuff. I'm totally blown away by the level you folks are discussing thing at.
I just replaced my Audiovox 6600 with a Cingular 8125 w/WM6. I had to upgrade to Activesync 4.5 and it was going exactly what you describe.
I SPENT OVER 8 HOURS ON THE PHONE WITH THE MICROSOFT "HELP" if you can call it that.
The rapimgr.exe file was getting caught in a loop and hogging all the CPU. The answer was in:
Settings --> Connections --> USB to PC -->: Uncheck the "Enable advanced network funcionality" box
BTW - after the marathon "help" session, I was the one that figured it out.
gwydionjhr said:
I'm a total newb to this stuff. I'm totally blown away by the level you folks are discussing thing at.
I just replaced my Audiovox 6600 with a Cingular 8125 w/WM6. I had to upgrade to Activesync 4.5 and it was going exactly what you describe.
I SPENT OVER 8 HOURS ON THE PHONE WITH THE MICROSOFT "HELP" if you can call it that.
The rapimgr.exe file was getting caught in a loop and hogging all the CPU. The answer was in:
Settings --> Connections --> USB to PC -->: Uncheck the "Enable advanced network funcionality" box
BTW - after the marathon "help" session, I was the one that figured it out.
Click to expand...
Click to collapse
Ok...props to you. First post and it's to help someone else with a well described solution. I hope this solves the person's problem and I'll have to remember to suggest this to folks having activesync issues... so much for "advanced network functionality" huh?
thanks alot... tried to fix this for 2 days. big props to you..
all of a sudden it wont sync. it makes noises like its doing something but it wont reconize on my pc.
got any idea?
Obvious but you probably already tried: Soft reset the device and reboot your computer.
Main other things to look at would be have you installed or changed anthing on your computer that can be blocking the connection like a firewall etc etc? Mine was blocking mine even though it made the sycing sound.
Have you installed anything recently on your device that might be causing problems?
i dont think so. the other night..late i was trying to make activesync not open by it self. i fixed it but not sure what i did. i think it was with the clock syncro to the network tab
Hello.
I asked the forum search about it, but cant find really an helpful answer.
I do have strong problem with Active Sync. Sometimes it works, sometimes it doesnt. Sometimes, I got to install Active Sync new or drop out the device and add it new to get it done.
Button for fast data connection at the Touch Pro is enabled. Working with 4.5.0 and XP.
Can someone please get me a tip?
Hardware Problem?
I had the same problem with my TyTN II which is the reason I switched to Touch Pro.
The problem I could not synch was because of the MiniUSB connector. I had to change the main board twice. So now my wife owns the TyTN II
i solved that problem by changing another usb slot (it didn't work with USB from my monitor...)
Thank you.
I tried all 6 USB Ports and nothing helped.
Also, I tried to disconnect all other USB devices, also enabled and disabled the "Charging while connected to the PC" button.
Any other suggestions?
I also had thrown out the second device I had in Active Sync.
drdurango said:
Thank you.
I tried all 6 USB Ports and nothing helped.
Also, I tried to disconnect all other USB devices, also enabled and disabled the "Charging while connected to the PC" button.
Any other suggestions?
I also had thrown out the second device I had in Active Sync.
Click to expand...
Click to collapse
Have you disabled "advanced network functionality" in Settings>Connections>USB to PC ?
also try reinstalling active sync again...
@Wonkotehsame:
Yes, I disabled this function.
@ yahu:
So I did. Not just one time, many times. Always after reinstalling, it workes. Some time later, I am loosing connection.
Also, if I try to copy larger files like GPS software with appr. 1,4 Gb the transfer to the Memory card stoppes with the failure message: no such file found.
Can this be something along with the Active Sync problem?
I too have problems with this. ActiveSync says phone is set up to sync with a different computer, but it's not.
Still nobody any hint for this problem?
My problem is a little bit diferent...
My vista won't sync with my Artemis, but it syncs with my Glofiish M700..
If i change the PC (OS XP x64), the artemis syncs.....
So, my Vista Notebook is angry with my Artemis... neither USB/BT sync can be done...
Nice to hear that a lot of people have similar probs ;-)
What I have done now, deleted all of my connetions features/partnerships and made all new.
For now (maybe until Monday...) it works, but now I dont get a folder on the desktop of my mobile device. Is this an optional setting? Can someone tell my how to do?
I dont believe that NOBODY has an help for this problem.
As of today, no Active Sync in any ways is possible with my phone. Even not if I make a new installation.
Also; I made sure that all Anti Virus and Firewalls do allow all 3 Active Sync Files.
What can I do else???
Another try for the specialists:
I have copied now my Outlook.pst to a different Desktop, installed there the Active Sync. I worked w/o prob. That means, the problem got to be with the Desktop.
Last try: Who can help?
drdurango said:
Another try for the specialists:
I have copied now my Outlook.pst to a different Desktop, installed there the Active Sync. I worked w/o prob. That means, the problem got to be with the Desktop.
Last try: Who can help?
Click to expand...
Click to collapse
Looks like you are on your way to finding the root cause. I would try the same computer but a different user to see if it is related to the user setting.
This is what I have done last night. 2nd user, installed OL new and also Active Sync.
Nothing. Same problems.
I restarted the Desktop AND the device several times.
Nothing.
But, when I came this morning, it worked the first time.
The second it failed. I will go and purchase a new Desktop for the thanks of Mr. Microsoft!
has anyone found a real solution for this problem?? mmy computer recognizes the phone a a disk drive bt active sync does nothing. any help would be greatly apprecated
I'm getting this too. Sometimes ActiveSync works, sometimes it doesn't. I can't figure out what causes it to work and not work...
Theres only two possible solutions I know of from all I've ever heard of the problem:
1. Settings-->Connections-->USB to PC. Also, I know the prompt asking you if you would like to use as a disk drive comes up if you've set your phone to be read as an sd card reader. If the pop up annoys you, try removing the SD card and trying again.
2. Hard reset.
Sorry if it doesn't seem favorable to you guys.
I have searched extensively and can't find answers that work for me.
I have tried several of the latest 6.5.1 and 6.5.3 roms on my Wing (which is HardSPL'd) and almost all of them have the same issues:
1) My USB to PC icon is gone in Settings\Connections. Did MS move it somewhere else? I'm having Activesync issues and think this is why, but can't change the "advanced network setting."
2) Wifi... I tap on it to turn it on or off, and more than half the time, nothing happens. It'll either stay on, or stay off. Ideas?
I had some of the same issues with some older 6.5 roms as well. Do I need to update/downgrade some of the individual device drivers or something? I'm at a loss.
Thanks, and sorry if this repeats anyone else's posts.
I am also having similar issues. I HardSPLed my wing and after I did that successfully I decided to update my wing with SIMPLY EVERYTHING 6.5.1 BUILD 23616 so I flashed it on my wing. It's installed fine and is working but now my wing doesn't connect via active sync to my PC (same PC i used to HardSPL my wing and flash this build). The USB cable is connected firmly as it does charge my phone, just fails to connect the phone with the PC via active sync.
I would really appreciate if someone can either provide a fix for this issue on this thread or tell us a way to somehow flash the device with another ROM (from storage card somehow).
Thanks in advance.
Sort of solved...
This is the one I found that works best on my Wing:
Search forums for "Illconcepts Current Projects" (won't let me post a link)
(the 28014 Titanium at the top of the page)
It is flashed from SD card like most are now (nice!).
Occasionally (usually after soft reset) the first time I try to turn on wifi it will fail to start the wifi, but it works after that until next soft reset. Have had no connection issues with ActiveSync.
Big plus of this rom is that it's fast, is lean and leaves lots of program space. I added Office and such, but on the SD card, so I can still run Skyfire (just about every other rom I tried didn't have enough program memory free to consistently run Skyfire after I installed all my standard programs).
Only down side I see (if this is one?) is that it has old PIE, not newer version, and PIE doesn't work properly at all. Only problem this has caused me is making it difficult to download/install java apps easily, as Opera Mini always seems to give me "invoke errors" when I try to download files, and since Skyfire only seems to be detected as a "full" browser, it won't pull up mobile versions of most sites, thus won't get access to the java app links, etc. Would be nice to hear of a solution for this (preferably how to fix Opera Mini's "Opera Invoke Error")
i guess this wil help u all coz it worked for me
rprakash said:
I am also having similar issues. I HardSPLed my wing and after I did that successfully I decided to update my wing with SIMPLY EVERYTHING 6.5.1 BUILD 23616 so I flashed it on my wing. It's installed fine and is working but now my wing doesn't connect via active sync to my PC (same PC i used to HardSPL my wing and flash this build). The USB cable is connected firmly as it does charge my phone, just fails to connect the phone with the PC via active sync.
I would really appreciate if someone can either provide a fix for this issue on this thread or tell us a way to somehow flash the device with another ROM (from storage card somehow).
Thanks in advance.
Click to expand...
Click to collapse
all you guys just need to open network cards under connections in settings. just tap the Sdio wlan wirelss adapter and then select name servers and copy the dns and alt dns as the same as in your desktops. Select ok and restart your phone..
it should work just fine...
all the best..
uh...no...
Doesn't have anything to do with DNS settings. DNS settings doesn't affect whether or not the wifi card turns ON or OFF. It affects connections. This is different, dude.