Related
This is for everyone out there who upped to WM6 on wizard models and found ActiveSync not recognising your fone over USB. Download ActiveSyncMode.cab (sometimes named ActiveSyncMode.sa.cab) and install it on your Fone. Run it - Start/Programs/ActiveSyncMode.exe -
http://www.utstar.com/pcd/downloads/ActiveSyncMode.sa.CAB
Select 'USB Serial Sync Mode'. Now try connecting your fone and it should work.
I tried almost 50 posts and advices over 3 days and this one worked like a charm. I know there must be other issues with other fones which have different solutions. Please feel free to add to this thread all/any verified solutions.
hi,
i have tried it, but it doesnt work. do you have made spacially things to get i work ?
Not really. Installed ActiveSyncMode. Ran it and selected USB mode instead of RNDIS mode. This fixed the problem for me with a WM6 upgraded 8125 and 2 other friends with Original ROM 8125 and Original ROM MDA.
i unchecked "Enable advanced network functionality" in USB to PC settings on my phone and got activesync to work for me when i was having trouble
us687008 said:
This is to everyone out there who upped to WM6 on wizard models and found ActiveSync not recognising your fone over USB. Download ActiveSyncMode.cab (sometimes named ActiveSyncMode.sa.cab) and install it on your Fone. Run it - Start/Programs/ActiveSyncMode.exe -
http://www.utstar.com/pcd/downloads/ActiveSyncMode.sa.CAB
Select 'USB Serial Sync Mode'. Now try connecting your fone and it should work.
I tried almost 50 posts and advices over 3 days and this one worked like a charm. I know there must be other issues with other fones which have different solutions. Please feel free to add to this thread all/any verified solutions.
Click to expand...
Click to collapse
Hi! I've got the same problem, and i was solutionated with reinstall the activesync. So go to microsoft site, and download the activesync 4.5 again. After that try to sync your pda, and maybe its solve.
THANKS VERY MUCH
YOU SOLVE GREAT PROBLEM
us687008 said:
This is for everyone out there who upped to WM6 on wizard models and found ActiveSync not recognising your fone over USB. Download ActiveSyncMode.cab (sometimes named ActiveSyncMode.sa.cab) and install it on your Fone. Run it - Start/Programs/ActiveSyncMode.exe -
http://www.utstar.com/pcd/downloads/ActiveSyncMode.sa.CAB
Select 'USB Serial Sync Mode'. Now try connecting your fone and it should work.
I tried almost 50 posts and advices over 3 days and this one worked like a charm. I know there must be other issues with other fones which have different solutions. Please feel free to add to this thread all/any verified solutions.
Click to expand...
Click to collapse
THANK YOU!!! What exactly does this cab do to fix the problem?
us687008 said:
This is for everyone out there who upped to WM6 on wizard models and found ActiveSync not recognising your fone over USB. Download ActiveSyncMode.cab (sometimes named ActiveSyncMode.sa.cab) and install it on your Fone. Run it - Start/Programs/ActiveSyncMode.exe -
http://www.utstar.com/pcd/downloads/ActiveSyncMode.sa.CAB
Select 'USB Serial Sync Mode'. Now try connecting your fone and it should work.
I tried almost 50 posts and advices over 3 days and this one worked like a charm. I know there must be other issues with other fones which have different solutions. Please feel free to add to this thread all/any verified solutions.
Click to expand...
Click to collapse
I had to reinstall WM6 and now ActiveSyncMode.sa.CAB no longer fixes my connectivity problem. I'm getting fed up with WM6.
I have tried everything else and will now try this. I did not realize that this was such a problem, until I started researching to solve my own problem. So good luck to me.
Fixed it with my own build. So far. I still have to try and sync with another computer. That is where the biggest problem has been for me, is syncing with two computers.
Under Vista 64, I normally have McAfee firewall at the highest setting and also have Windows Firewall on.
At first, after upgrading to WM6, I could not sync. I then found some registry fix procedures and tried them but it did not work. I then installed ActiveSyncMode.sa.cab and it allowed me to sync. Maybe that combined with the prior registry fix might have allowed me to sync.
However, after I uninstalled WM6 and reinstalled it, I could not sync anymore. I installed ActiveSyncMode.sa.cab again, but it did not work this time. I did not try the registry fix this time because I can't find the procedures, which I originally found online. I can't remember how to find them again.
I then turned off both Windows Firewall and McAfee firewall and I was able to sync again.
I then reinstalled Windows Mobile Device Center while having the firewalls off, hoping it would allow the installations to complete properly.
I then turned on Windows Firewall but it was still blocking the sync.
I restored Windows Firewall back to default and it made it worse. I then had to reinstall Windows Mobile Device Center and was able to sync again with Windows Firewall on. Often I would have to disconnect the cradle to establish reconnection.
Next, I needed to figure out how to turn on McAfee firewall and allow it to sync.
I then contacted McAfee and they told me to exclude Universal Plug and Play (UPNP) port 5000 and Windows File Sharing (NETBIOS) port 137-139. It didn't work exactly until I lowered the firewall one level. What all this networking stuff means, I don't know. I'll have to do more searches on them.
I now need to figure out how to put McAfee firewall back at maximum level while still allowing me to sync.
a_ok2me said:
Under Vista 64, I normally have McAfee firewall at the highest setting and also have Windows Firewall on.
At first, after upgrading to WM6, I could not sync. I then found some registry fix procedures and tried them but it did not work. I then installed ActiveSyncMode.sa.cab and it allowed me to sync. Maybe that combined with the prior registry fix might have allowed me to sync.
However, after I uninstalled WM6 and reinstalled it, I could not sync anymore. I installed ActiveSyncMode.sa.cab again, but it did not work this time. I did not try the registry fix this time because I can't find the procedures, which I originally found online. I can't remember how to find them again.
I then turned off both Windows Firewall and McAfee firewall and I was able to sync again.
I then reinstalled Windows Mobile Device Center while having the firewalls off, hoping it would allow the installations to complete properly.
I then turned on Windows Firewall but it was still blocking the sync.
I restored Windows Firewall back to default and it made it worse. I then had to reinstall Windows Mobile Device Center and was able to sync again with Windows Firewall on. Often I would have to disconnect the cradle to establish reconnection.
Next, I needed to figure out how to turn on McAfee firewall and allow it to sync.
I then contacted McAfee and they told me to exclude Universal Plug and Play (UPNP) port 5000 and Windows File Sharing (NETBIOS) port 137-139. It didn't work exactly until I lowered the firewall one level. What all this networking stuff means, I don't know. I'll have to do more searches on them.
I now need to figure out how to put McAfee firewall back at maximum level while still allowing me to sync.
Click to expand...
Click to collapse
After doing all the steps above, I found that all I needed to do was lower the McAfee firewall level one notch to be able to sync. However, I'm still going to figure out why I had previously been able to sync at the maximum security level. There must be some exclusion that got remove that I need to add again.
Activesync and HTC s620 issues.
This issues is driving me completely insane, So far this thread is about the only related info on the problem too. I find it hard to believe there aren’t more people out there with these issues, anyway here’s were I’m at:
Got a HTC s620 Smartphone from BT, Active sync simply didn’t work from day one and me being an IT support guy I haven’t been able to resist going back to the issue.
For over a week I have made pretty much no progress at all, I can’t find a activesyncmode.sa.cab file for my phone that works yet so got nowhere with that, the HTC website is about as useful as a chocolate fire guard.
The first leap of progress was spotting a trick on here of disabling the advanced network functionality on the phone its self.
It was baffling me at first why my computer was picking up the phone as if it was a network adapter. (And trust me I tried all sorts of in depth stuff down that avenue). It makes sense now though that the Smartphone can be setup to act as a network adapter/modem. Hence now I’ve disabled the advanced network functionality on my phone Active sync instantly make noises and hey presto ‘Connected’ and then a few moments later I’ve now got some other critical error
So my quest continues, but I will get to the bottom of this if it kills me!
So for the record, anyone with a HTC s620 Smartphone running Windows Mobile 6, before you do anything else do this:-
Start
Settings
6. Connections
7. More…
4. USB to PC
(Remove the bloody tick from box) Enable advanced network functionality
I will report back with my next hurdle…
OK, as much as I’d played around with my firewall it would turn out that this is the second culprit causing my problems. I tried installing Activesync on my Laptop and Desktop and had the same errors, however the only thing those to computer have in common is the Iolo System Shield installed. Last night to just ensure I wasn’t going mad, I tried it on my wife’s laptop and hey presto! It worked first time. So naturally, I’ve uninstalled the Iolo System Shield from my computer and bingo, worked straight away.
This is annoying however, because I did everything from the Microsoft Help setting up exceptions etc. in my firewall. But there you go.
In brief:
Check your device has the advanced network functionality disabled.
Uninstall your 3rd party firewall and test to pin point the cause, then you know what you’re dealing with.
Just a second thought of advice, one of the first things I tried was disabling the firewall, from my experience that wasn’t enough, it had to be uninstalled to get it to work. Before anyone else goes down the hair pulling road of trying anything and everything under the sun, uninstall your firewall/system guard software. At least if it works after that you know exactly what is causing the problem.
Then getting it to work with the firewall installed is something you can focus on possible in conjunction with the software vendor.
I fixed teh same problem by unchecking the advanced box but .....
after oving back to wm5, I cant connect as well. I look for the working solution from WM6, but I cant find the menue to disable the advance usb connection.
It looks like that is the problem to sync with vista 64
Hope somebody has a idea.
thx in advance
My USB connection to activesync stopped working. (although at my second pc it still works OK)
It works via InfraRed though!
I think this USB problem started when I was trying to connect via bluetooth.
Don't you just hate ActiveSync!?
Well, maybe the problem is with Windows XP... because it doesn't recognizes the PDA.
Anybodies help? Thanks in advance.
No file ActiveSyncMode.cab !
Help
No worries, new link:
http://www.pcdphones.com/downloads/ActiveSyncMode.sa.CAB
Also attached to be safe
would be a shame to let a useful thread go into some archive, so I'm resurrecting this oldie.
Also, I remedied this activesync issue with a more straigtforward fix. Fresh flash of 6.5. After deleting all the USB devices in the device mgr (didn't help), I saw there was a WM6.5 setting for default behavior on PC Connection (or something similar to that). Changed it from "setup" to "sync" & that silly white toggling screen went away and allowed a flash back to 6.1.
Hello.
I asked the forum search about it, but cant find really an helpful answer.
I do have strong problem with Active Sync. Sometimes it works, sometimes it doesnt. Sometimes, I got to install Active Sync new or drop out the device and add it new to get it done.
Button for fast data connection at the Touch Pro is enabled. Working with 4.5.0 and XP.
Can someone please get me a tip?
Hardware Problem?
I had the same problem with my TyTN II which is the reason I switched to Touch Pro.
The problem I could not synch was because of the MiniUSB connector. I had to change the main board twice. So now my wife owns the TyTN II
i solved that problem by changing another usb slot (it didn't work with USB from my monitor...)
Thank you.
I tried all 6 USB Ports and nothing helped.
Also, I tried to disconnect all other USB devices, also enabled and disabled the "Charging while connected to the PC" button.
Any other suggestions?
I also had thrown out the second device I had in Active Sync.
drdurango said:
Thank you.
I tried all 6 USB Ports and nothing helped.
Also, I tried to disconnect all other USB devices, also enabled and disabled the "Charging while connected to the PC" button.
Any other suggestions?
I also had thrown out the second device I had in Active Sync.
Click to expand...
Click to collapse
Have you disabled "advanced network functionality" in Settings>Connections>USB to PC ?
also try reinstalling active sync again...
@Wonkotehsame:
Yes, I disabled this function.
@ yahu:
So I did. Not just one time, many times. Always after reinstalling, it workes. Some time later, I am loosing connection.
Also, if I try to copy larger files like GPS software with appr. 1,4 Gb the transfer to the Memory card stoppes with the failure message: no such file found.
Can this be something along with the Active Sync problem?
I too have problems with this. ActiveSync says phone is set up to sync with a different computer, but it's not.
Still nobody any hint for this problem?
My problem is a little bit diferent...
My vista won't sync with my Artemis, but it syncs with my Glofiish M700..
If i change the PC (OS XP x64), the artemis syncs.....
So, my Vista Notebook is angry with my Artemis... neither USB/BT sync can be done...
Nice to hear that a lot of people have similar probs ;-)
What I have done now, deleted all of my connetions features/partnerships and made all new.
For now (maybe until Monday...) it works, but now I dont get a folder on the desktop of my mobile device. Is this an optional setting? Can someone tell my how to do?
I dont believe that NOBODY has an help for this problem.
As of today, no Active Sync in any ways is possible with my phone. Even not if I make a new installation.
Also; I made sure that all Anti Virus and Firewalls do allow all 3 Active Sync Files.
What can I do else???
Another try for the specialists:
I have copied now my Outlook.pst to a different Desktop, installed there the Active Sync. I worked w/o prob. That means, the problem got to be with the Desktop.
Last try: Who can help?
drdurango said:
Another try for the specialists:
I have copied now my Outlook.pst to a different Desktop, installed there the Active Sync. I worked w/o prob. That means, the problem got to be with the Desktop.
Last try: Who can help?
Click to expand...
Click to collapse
Looks like you are on your way to finding the root cause. I would try the same computer but a different user to see if it is related to the user setting.
This is what I have done last night. 2nd user, installed OL new and also Active Sync.
Nothing. Same problems.
I restarted the Desktop AND the device several times.
Nothing.
But, when I came this morning, it worked the first time.
The second it failed. I will go and purchase a new Desktop for the thanks of Mr. Microsoft!
has anyone found a real solution for this problem?? mmy computer recognizes the phone a a disk drive bt active sync does nothing. any help would be greatly apprecated
I'm getting this too. Sometimes ActiveSync works, sometimes it doesn't. I can't figure out what causes it to work and not work...
Theres only two possible solutions I know of from all I've ever heard of the problem:
1. Settings-->Connections-->USB to PC. Also, I know the prompt asking you if you would like to use as a disk drive comes up if you've set your phone to be read as an sd card reader. If the pop up annoys you, try removing the SD card and trying again.
2. Hard reset.
Sorry if it doesn't seem favorable to you guys.
I've tried using Resco Explorer 7.05/Total Commander 2.5.1/HTC's Network Plugin
For some reason i can't seem to map network drives.
In resco when i try to connect to a drive it tells me it's not accessible
In Total Commander it just doesn't connect
In HTC's Network plugin it writes: "Map Drive Failed"
-I'm using Vista on the comp i want to share folders in.
-Sharing works fine on all comps other than in my PPC (not password protected)
-It seems as not only it doesn't map the drive but doesn't acknowledge as anything but the computers on the network exist. no folders inside those computers. Thought about changing my ppc's domain but i don't know how to do that.
any help would be appreciated.
thanks
Yeah, VISTA FILE SHARING is a bit tricky! You not only have to share that particular drive / folder; you also have to check the settings in the SHARING CENTER - in addition you might have to adjust the file permissions as well.
Everything is perfect on file settings. i have a network running 3 computers and 2 laptops all sharing folders no passwords all permissions set. only thing not able to read the folders is the PPC. It finds the comps on the network but doesn't show the folders.
Did you MOUNT the drives in RESCO? You can't just click on it in the FILE EXPLORER - tap and hold, then select MOUNT DRIVE or FOLDER (depending on what you're sharing).
What RESCO VERSION did you use?
dude... i can't see drives nor folders.
i'm using 7.05
for the record, i tried looking at a winxp comp instead of a vista one.. can't see anything.
tried accessing through ip and name.. both come out with nothing..
I wish someone would help with this also. I have two computers and 1 ppc on my home network. My ppc(HTC Titan) used to be able to access both computers. Then all of a sudden it stopped working for my main computer(bedroom) with all MY files on it, but it still accesses files on my second computer(upstairs). On the main computer(bedroom) I can access the shared folders of the second computer(upstairs), but the second computer can't access the files from the main computer.I dont know whats wrong, but it seems more like a computer issue. I operate Windows XP on a Dell. The network folder used to work perfectly for me and I can't put my fiinger on what's blocking it.
This might be the wrong thread to post this issue(maybe the wrong website) but I thought I would ask since the issues are similar. If it's a ppc program for accessing the shared folders on a computer, then someone should have a How-To or a check list of how to set both up for the program to work fluently. Can somebody please post what you need to do on the computers to ensure sharability of the file systems.
The reason why this is so important to me is because I have been hooking-up my Titan since may 2008 and I am near completion. I'm totally done adding app's and the functionality of the device is superb except for this issue. Just bought a 16gb micro sdhc card and that works great. My girlfriend just ordered a seido 3500mah extended battery with the door to fit and a rubberized hard case for extended battery fit. I'm so excited about have the best phone setup of my life but I everytime I go back to this issue I get pissed off. It was all good til about 4 months ago and I don't know why it suddenly stopped working. Please HELP!!!
If the HTC Network plugin is not locating your shared files on your network, this likely suggest that it is an issue with your network settings. I suggest playing around with your security settings; however, I just recently had a problem accessing any of my shared files over any of my computers between each other and between my HTC Device. It just suddenly stopped working. I knew that I didn't change any settings myself and had tried many things to try to resolve the problem without success. I then decided to run my anti-spyware programs and Anti-Virus programs and let them run overnight. In the morning, the Anti-spyware removed several things - One was labeled as high risk and the others were low and the Anti-Virus found two high risk viruses. Everything was taken care of automatically and voila - I had no problems connecting to my shared files with my computers or my HTC Device. I ran the spyware and virus check programs again and everyting was clean.
the problem is that i can't even map the drives. i can see the comps on the network using the HTC Network Plugin but can't do anything other than that. when i try mapping a drive it tells me that i can't.. for some reason.
i removed password protection...shared the drive... nothing works.
I am assuming you are trying to connect through WIFI -
Make sure that you are actually connected to your network. My device has on several occasions connected to my neighbours wifi rather then my own - results in not being able to access shared folders
Through HTC NEtwork plugin you are exploring the computer for the shared folders right? You say you can see the computers - when you click the plus next to the specified computer in the network plugin are you getting any results at all there.
Make sure you don't have (I don't know if this is what it is called) MAC address filter or password. One of my friends has an open WIFI Network but has MAC Address filter which stops you from actually being able to use the network. You can connect but that is it. You wouldn't be able to surf the internet at all through WIFI either if this was the problem.
If it is none of these, Maybe it is a Windows VIsta problem - I don't know, I have XP
Do you have trouble connecting to other shared folders on other peoples WIFI networks also? (people who have XP)
-XP doesn't work either.
-i can see the comps, so i'm obviously connected to the network.
-i have mac filtering - see previous statement
-wifi works - see previous previous statement
dunno what to do.
Maybe something with your WIFI Settings on your device then?
Maybe you can review your settings on your device - Anythign that you think might be causing the problem - Describe it here, I will check my device settings (even though different devices - should still be the same - and will let you know if there are any differences. I must go eat dinner right now, but will check back after supper and bathing my daughter and putting her to bed. in a hour and a half two hours from now...
Set your desktop to support NTLM instead of just NTLMv2.
That way I got shared folders working with the HTC Network Plugin and my Vista desktop. Unfortunately some HTC apps (like HTC Camera) only expect your device to have two drives (internal ROM and flash card) so when you mount a network drive, they can't access your flash card.
Well, i can start searching, but if you don't mind, could you tell me how to do that?
nir36 said:
Well, i can start searching, but if you don't mind, could you tell me how to do that?
Click to expand...
Click to collapse
Start.
Run.
Type "mmc".
Ok.
File.
Add/Remove Snap-in.
Group Policy Object Editor.
Add.
Finish.
Ok.
Local computer policy.
Computer configuration.
Windows settings.
Security settings
Local policies.
Security options.
Right click on "Network security: LAN Manager authentication level".
Choose "Properties".
From the drop-down box, choose one of the first three options (you'll have to experiment).
Ok.
thank you very much. i will try it out and post the results
wow. it worked. WONDERFUL.
thank you SO much.
nir36 said:
wow. it worked. WONDERFUL.
thank you SO much.
Click to expand...
Click to collapse
I'm glad it worked for you.
everything seems to work great now... and very fluently. it's superfast.
feanor512 said:
Start.
Run.
Type "mmc".
Ok.
File.
Add/Remove Snap-in.
Group Policy Object Editor.
Add.
Finish.
Ok.
Local computer policy.
Computer configuration.
Windows settings.
Security settings
Local policies.
Security options.
Right click on "Network security: LAN Manager authentication level".
Choose "Properties".
From the drop-down box, choose one of the first three options (you'll have to experiment).
Ok.
Click to expand...
Click to collapse
I wish it worked for me too, but when I get to the "Group Policy Object Editor" I'm getting lost. I don't see that anywhere. Is my computer missing important files? I'm using windows xp. I hope I don't have to restore the whole computer to get the file sharing working. But if I gotta do it I will.the phone see's the computer, but no file sharing. It is that important to me to share files between my phone and computer. My home setup is sweet, and my phone is an extension of it.
Any Other Ideas
So, I have gone through and done everything suggested here. Lan Authentication, created private network, reconnect, everything I can think of...nothing seems to work
Does anyone have any further ideas about what could possibly work to create a LAN over WIFI?
Hardware:
Vista Business, Mogul 6.1 stock ROM 5.2.19208 and Folder Plugin build 30468.
DONE SO FAR:
Have created an adhock private network...connected to it on my device no problem. But when i go to search for my computer in network plugin under the browse menu it thinks about it and in the end doesn't see anything...
so, at wits end...I know I am new but most of the info over is fairly beyond my level I am certinaly a lurker and no info over at PPC Geeks with solutions...either way alot of the stuff over there comes from over here so thought I would see if anyone had some suggestions.
thanks for the help,
icn4d
Hello people.
I recently reinstalled my Win7 and I wanted to connect it with my X1, but when I plugged the phone in for the first time, Windows started downloading some weird drivers (RNDIS?) instead just opening the device control panel thing. Now I'm pretty much stuck and can't connect my phone to my PC (I get the connection error sound every time), except for the disk mode.
I've serched for some answers here on xda as well as on the internet and all the fixes I found either don't work, are already applied or open up new problems for me.
Here's what I've tried already:
Rebooting PC countless times
Turning off the advanced network settings in usb to pc menu on X1,
Reinstalling WMDC countless times
Downloading some weird WMDC updates from microsoft download center
Configuring the registry (Enum key) - getting access denied error to everything I'm trying to do there
Opening the device manager in Windows - It's just blank.
About the software and ROM status, my X1 was just HR'd and I've installed just some basic stuff like the performance pack (Advanced Config + SKTools), MortScript and S2P.
I know that the problem here is rather related to PC, but I hope you guys still can help me, as I'm running out of ideas (and sanity).
Sorry for my english (not my native language), and please do help me if you can.
Same problem here.
So far I've been able to troubleshoot it a little.
First off RNDIS is the regular WinMo driver. So nothing weird there.
Secondly WMDC does work when you run the app as an administrator (on my end anyways). That is in no way a solution though... just a workaround.
I now need to pinpoint the part that needs the actual admin rights.
I'm going to keep on trying to find the answer and I hope more people will help.
Thanks for replying for my post.
Launching WMDC isn't the problem for me though. It starts up fine, it just doesn't connect with the phone.
Keeping fingers crossed for a solution, and thanks again.
I managed to get it started too now.
Again, as an administrator it runs all fine and dandy, but no sigar as a user.
So after I get it started no connection whatsoever. Still looking...
Got it!
Installed the drivers through SCCM at system deployment. Then WMDC installs perfectly.
It still wouldn't run though. And this was because of a policy which was enabled: WPD Device: deny read/write access
Enabling write access solved my problem.
hi henk!
I had the same problem.
I changed the policy, then win7 installed drivers for the xperia, it recognizes the phone, I'm able to navigate into the memory card...
But the wmdc don't see my xperia is connected, and if I try to transfer some music from win7 to my xperia, it's very slow(1b/s)!
Have you got any idea?
Had you the same slow speed?
I dont know if this is the right way to ask this question, or the ringt place in the forum. I just know ive always found a lot of answers here before and now ive come to a dead end. Ive had a problem with my samsug sgh-i780 for atleast six months that i cant fix. I try to every once in a while, but just end up extremely frustrated and agitated. So, this time the same thing happend again, but i am willing to try and do something productive instead and vent my anger and problem here instead
The problem with the phone is that it refuses to connect to the internet. But only specific programs on the phone. Most of them connects perfectly, both via GPRS and WIFI. The problem is the programs that are from microsoft. They all promply refuse to acknowledge any connection whatsover to the internet.
I use WM 6.1, its not the shipped OS but i've updated it with samsungs official updating rom. So, the programs that refuses are IE, windows marketplace, windows update,the built-in podcasts and rss-reader program, maybe some others.
However, these programs COMPLETELY REFUSES to connect. Almost INSTANTY an alert window with "no connection avaliable. please change your settings or try again." or something similar pops up. Immedietly. Extremely provocing to me, since I know theres both a working gprs and wi-fi connection that ALL the other programs (opera (3 different versions)), coreplayer, etc can use, and do USE flawlessly all of the time. Gah, even writing about it drives me crazy
So anyways. Ive googled this thoroughly on SEVERAL occasions, ive gone through every single internet setting i've found on this mobile phone and changed it back and forth on several occasions, ive searched and searched this forum several times but ive ended up with nothing to guide me in troubleshooting/fixing this and i feel like my next step is throwing it into the wall. Wich wouldnt really SOLVE the problem... but atleast eradicate it
Long post, my bad, ill try and keep it shorter. Just wanted to write it all out, maybe im leaving out important info, feel free to ask me complete your picture if this with whatever you need to know. Maybe someone of you recognizes this problem immedietly and knows what it is and how to fix it. Any way, im happy to recieve any ideas and suggestions you might have.
Thank you in advance,
Malte
The best thing you can do right now is wait until i bring an SGH-780i from my workplace and go through the steps with you I'll have it by tuesday/wednesday.
(that is, because i can't really think of a reason for this to happen unless microsoft has found a way to block unofficial roms from using their applcations (doubtful)).
Awesome! I like the timing of yours; tuesday is my birthday
Will be waiting
/Malte