I need to cid unlock my prophet(s200,jamin)
I tryed with the software in wiki-developers
but it makes problem does anybody help me by cid unlocking for chipshet for 0001
http://blog.neten.de/read.php?66
???????????????????????????????
A little bit difficult for us to understand the link you posted. Is possible to update in english? Thank you in advance!
yes please if this is a way to cid unlock a G4, can someone please translate?
not really a solution
I read the entire post. It is NOT a CID unlock, basically the guy just ran aWizard and ignored the error of CID unlock error. The screen says CID unlock success, but it doesnt really unlock CID. rest explains what roms he used to update his O2 xda. Mostly are in Simplified Chinese ROM. Nothing special or new in that post. Search is still on.
Kensu, thanks for your time!
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
abubasim said:
If you want to install a new ROM then there is no need to unlock CID. This procedure explains a method for updating all components except IPL/SPL on a Wizard. The same procedure and the same tools in the document can be used on a Prophet.
Pay attention to the warnings on the first page though. The procedure is not trivial so make sure you know what you are doing before you actually do it!
Click to expand...
Click to collapse
Has someone already successfully tried this procedure on a prophet?
inshar said:
Has someone already successfully tried this procedure on a prophet?
Click to expand...
Click to collapse
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
abubasim said:
Yep! Works well, as long as you try AKU2.x or better for the OS module. It didn't work with i-mate's old 1.2 ROM for JAMin but that just confirms what the article says. Everything else I've tried so far worked.
Click to expand...
Click to collapse
I can confirm!
I have used the procedure tonight and all worked perfectly!
Enough simple and with no unpgrading problems!
Now I have Italian rom on my device!
Thanks for help!
Prophet ( Qtek S200)
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Merlino said:
Hi inshar.
Have you tried with prophet with JAMin_ITA_2130921_21309111_020720_ship ROM ?
Do the settings remain the same as k-jam (ex. OS start address 80040000, HTC logo ?
Thank you
Merlino
Click to expand...
Click to collapse
Yes that rom and the configuration is the SAME of K-Jam (i had a 02 Mini S before thiefed :-(( )
Thanks
Great !
It works... Thank you so much
Merlino
Hello all,
i'm new here and i dont understand something :
following this tutorial can i install on my o2 neo an italian 2.13 rom instead of the english 2.15 i am currently using?
in other words can i "down"date my rom from 2.15 to 2.13?
another question: wich is the best italian rom so far?
i've managed to find only a 2.13 around,are there any newest italian rom around?
thanks
Probably I made something wrong, my device is DEAD!!! I have been severals hours to fix it but no way.
Now I can see the device in boot loader mode (3 colors)
IPL 1.00
SPL 2.15.0001
How can I recover the installation?
You have missmatch in IPL and SPL version.
Your IPL is corresponding to DOC G3, but SPL DOC G4.
This should not be the case. What was your original DOC?
Do you have USB connection when in rainbow screen?
rgds,
fdp24
No, I don't have a USB connection. Tonight I was thinking and I going to try to put the ROM stop at bootloader. Let me try it now. As soon as I have some news I'll post it. Thanks!
I just finish to download the Dopod 818 Pro Rom stop at bootloader fix but now the problem is getting biger, I mean, the battery is empty, so I can not charge the device with the USB or AC cable. I have to find a battery to try with this Rom. Or go to the technical support and try to fix it.
The screen is on and of by it self efvery couple minutes (just for a while)
Finally I got a charged battery from my brothyer and I started to download the mentioned rom, but at 80% stop, I get an error message.
ERROR 326 Invalid Command. This NBF file cannot be used for your PDA Phoen. Please check your NBF.
How could I do? Suggestions???
I made a call phone to the service mantenience and I have a date to try to fix it. I'm affraid they are going to tell me something I don't like to heard, but...
Now I'm going to start a new life without my Prophet for a few days, or at least, hope so.
hi there
i am using imate jamin da problem with my cell is
i upgraded my rom to qtek 2.20000 it was working absolutely fine with 8 icons in my comm manager then i upgraded to RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-b1 and it has severely damaged my cell as my phone my phone hangs white booting it shows me the colour screen with
IPL 1.00 and SPL 2.20.0001
on the Screen
OS and GSM is not displayed
I tried rom update several times but its not working
i even tried to format my phone but it gives FAT16 format failed
I even tried to upgrade to jesters RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1 but still its not working and givng same problem
now i dont understand what to do
i just brought this phone from dubai last month its under warranty will imate people sort this problem ????
guys please give me Advice and solution for this IPL SPL Problem
Thanks in Advance
Hello, I feel sorry for your bricked Prophet but here some informations. First of all, there is no need to write in big red letters. This usually annoy people or make them feel offended. You are not more important than others - who have their own problems as well. Writing normally would usually give better chances for a reply.
Here some feedback for your problem :
a) As long as you can get back into the boot loader as long everything is recoverable (hold camera button and reset and keep the camera button pressed until you get into the boot loader with the different colors). As long as this is still there as long you can recover.
b) Get an official ROM from your service provider for your Prophet and flash it back.
c) Only problem you might have is the updated boot loader (2.20).
big red annoys me.
You did not try to flash your G3 phone with a G4 rom now did you? (or G4 with G3 rom..)
As Spatzm said: Try to get into bootloader. If that works try updating again with the official qtek 2.20 rom. (here). And READ that topic about how to install and get yourself the ROMUpdateUtility_NoID.exe from the ftp (see wiki).
Since you tried to update with the 2.20 rom (which is the base of Jesters rom) you cannot downgrade, that's why you need to use the 2.20 official qtek rom (which is suitable for both G3 and G4). You can only downgrade if you have a CID unlocked G3 (if you don't know if it's CID unlocked then it's not ) with a G4 device you cannot downgrade to put it down shortly.
Hello
Are there anyone who can help me Flashing my Wizard to a touch?
Pm me for my msn
My cid is locked
http://forum.xda-developers.com/showthread.php?t=298613
as self explanatory as can be
Thats not my problem..
Okay, here it is:
My cousin has a S200 and i have a wizard, i went to him and he said "Oh yea, of course i know how", so we used a program i think Sspl and to the left there was a picture of his prophet and we pressed "upgrade" so my problem is now that i have a strange rom on my phone, and belive me, its VERY slow and when i want to see battery status it says "Unknown" and it doesnt recharge i think (No orange light). My phone is CID locked, so i want to unlock it, but when connecting to a computer it doesnt connect proberly. Fx. in Wizard service Tool i can "Enab. Rapi + Unsigned Apps" but i cant Read Cid, it says my device isnt connected. (Wish i could before) so i need help down grading to my old software and unlocking and finally, flash it to a touch...
Soz bad english
NB! Its G4 - This is my first Windows mobile flashing, but i am an expert on flashing Sony ericssons
Versions:
IPL 2.18.0001
SPL 2.18.0001
GSM 03.02.11
OS 2.20.7.34
Oh yea thanks guys..
Figured it out myself
Now running with BD
Hi,
Im using a Qtek S200 G4 and Im a newbie.
Ive tryed to install Windows mobile 6.1 and the ROM patching seems to be successfull but when the phone reboots I cant get through the BOOT screen (three colors). I believe I´ve follow guides correctly. Now I have reinstalled the defualt rom for this phone again and it works fine.
I´ve also patched the phone with HardSPL G4.
The ROMs ive tryed ton install:
wm61_korand_3_1
RomProphetManila2D Diamond
Any suggestions?
Does no one have a solution for me?
Anyone please help me
sta1n said:
Anyone please help me
Click to expand...
Click to collapse
if you have already hardspl your device can you post what comes up in first boot screen Mine is like this
Code:
IPL 2.10.0001
SPL 2,G4.4PDA
GSM 02.19.21
With my phone you can see that the hardspl was successful because it displays
SPL 2.G4.4PDA
Hi, I’m flashing newbie. I need to get my ipl / spl version to know what is my hardware versions (G3 or G4) and unlock the CID. The goal is to change my radio rom.
I’ve found 2 methods to get it and no one work for me.
I have a red splash screen and I can’t see anything on my phone boot. (It’s a SFR VodafonePhone)
I’ve try the tool WizardServiceTool v4.2.2 but it not work (script problem…)
I Have Raphael device (diamond Touch Pro) RATH100, my SIM is unlock (I have call SFR, it’s free).
I’ve change my rom for the last Energy rom (Really good job!) but WizardServiceTool v4.2.2 not work too.
Any Help will be really appreciated.
BOB
My Red splash screen hide my IPL / SPL.
Someone know if I can change my splash screen without unlock my CID ?
Please UP…
bob37 said:
My Red splash screen hide my IPL / SPL.
Someone know if I can change my splash screen without unlock my CID ?
Please UP…
Click to expand...
Click to collapse
Yes, follow this tutorial and you should be fine.
Thanks for you're response Bruce.
I will try it.
Bob
Thanks again Bruce, my splash screen is changed.
But I don’t see my IPL/SPL number just the RGD tab :
R 1.02.25.19
G 52.33.25.17H
D 5nergy ROM
I understood that the IPL / SPL numbers are displayed during the boot but maybe I'm wrong.
Someone can help me?
BOB
bob37 said:
Thanks again Bruce, my splash screen is changed.
But I don’t see my IPL/SPL number just the RGD tab :
R 1.02.25.19
G 52.33.25.17H
D 5nergy ROM
I understood that the IPL / SPL numbers are displayed during the boot but maybe I'm wrong.
Someone can help me?
BOB
Click to expand...
Click to collapse
You have to go into bootlaoder mode to see the IPL/SPL, what displays during bootup is the Radio\ROM version.
To go into bootloader mode, you hit soft reset while holding Down Volume. A tricolored screen will appear and this should display 1.90 OLINEX.
Yes I’ve 1.90 OLINEX.
So, I just want be sure, it would like to say it’s G3 wizard and I need follow the G3 guide (http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies) to unlock my CID and update my radio ROM (my SIM I early unlocked)?
Bob
bob37 said:
Yes I’ve 1.90 OLINEX.
So, I just want be sure, it would like to say it’s G3 wizard and I need follow the G3 guide (http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies) to unlock my CID and update my radio ROM (my SIM I early unlocked)?
Bob
Click to expand...
Click to collapse
Yes, I believe that's a great place to start.