hi,
i wanted to upgrade rom to 2006-10-05_Upgrade ROM_AKU2.3_lvsw, but when i start UPGRADE_ROM.bat it writes me ˝the system cannot execute the specified program˝.... i have g4
What i am doing wrong, please help me.
Thank you
Are there any instructions how to upgrade this rom, or any other?
tnx
Can you find more information on XDA-Wiki. You have to follow the ten steps the guys from PDAMobiz mentioned.
do i need to unlock CID?
Yes first you follow the ten steps, finally you can be able to put the ROM version you wish.
SPEEEED said:
hi,
i wanted to upgrade rom to 2006-10-05_Upgrade ROM_AKU2.3_lvsw, but when i start UPGRADE_ROM.bat it writes me ˝the system cannot execute the specified program˝.... i have g4
What i am doing wrong, please help me.
Thank you
Click to expand...
Click to collapse
Just a doof ball question. Are your running the update from your PC or your SD Card?
i am running from update from PC, is this ok? Where can i find instructions for unlockin cid? On wiki are't for 2.15.0001
I tried to unlock cid with this instructions http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=437&PN=1 ,but when i done first proces my phone stop at dopod screen.
Please help me because i would realy like to upgrade it to lvsw edition...
thank you
also he said you must downgrade to a specific rom first and listed the link.
read the post fully and you should be ok
i downgraded to RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID, read all thread...
allways the same
problem is with my computer. On other computer was everething fine. Somebody knows why?
thank you anyway...
Try upgrading/re-installing active sync to 4.1 or higher
i have allready 4.5
SPEEEED said:
i have allready 4.5
Click to expand...
Click to collapse
thats a BETA version, try 4.2
can anybody help he how to flash rom or change rom in windows vista
as i just bought new computer with windows vista loaded & it gives me hard time flashing rom
thanks
bhamanis said:
can anybody help he how to flash rom or change rom in windows vista
as i just bought new computer with windows vista loaded & it gives me hard time flashing rom
thanks
Click to expand...
Click to collapse
Aaarrrrrgh !!!
Don't be a lame ! go through the darn 'stickies', there's a very thorough written guide by dharvey on this very subject.But I'll still advise you and also recommended to flash or upgrade through using winXP.
I use ShellTool while upgrading my g3 Wizard to winmo 6. Try using the search engine in the forum.
1. i downloaded duttys rom
2. extracted the rom to my pc
3. ran hard spl(completed the process)
4. phone restarted and nothing changed
please help
running hardspl only installs hardspl
run the RUU for dutty's rom
gula187 said:
1. i downloaded duttys rom
2. extracted the rom to my pc
3. ran hard spl(completed the process)
4. phone restarted and nothing changed
please help
Click to expand...
Click to collapse
What you are doing wrong is posting this question in the wrong thread! Also might try reading here at dutty's wiki.
XtreMe_G said:
running hardspl only installs hardspl
run the RUU for dutty's rom
Click to expand...
Click to collapse
i followed all the directions but its still the same rom
Just read. . . what it says in the sticky that says "How to Flash a rom". . .
gula187 said:
i followed all the directions but its still the same rom
Click to expand...
Click to collapse
It does not sound like you did follow all the directions. You state that in number 3 you ran hard spl. Great. That only gets your device ready for receiving new ROMs....it does NOT actully put a new ROM on your device. Step 4 should be running the Dutty Rom .exe also.
There are other steps too. The Wiki and Sticky (hey that rhymes ) have lots of info, and in many cases, step by step processes. Try reading them again and see what you missed.
Best of luck to you. Once you get the process down, you can repeat and repeat and repeat.
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Have youtried with a previous Tomal ROM?
It worked for me in a similar problem
Good luck
kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Have you removed your SIM and SD card, before trying to re-flash?
I did
I had removed SD card and SIM card, but it stil stuck at 10%. But if I updated the radio, it will finish 100%, whwn it comes to Ext Rom and CE update, it just finished at 10%. Did I Brick my uni ? anybody can help ?
kotabunga said:
After updating with Tomals 8.2, I softreset but then all blank
I get to bootloader in try to flas it again but CE updating stop in 7% and then error....
I try all the methods using mtty and use the tool...but no luck, it still stop at 10% when updating CE
Pls anybody help!!!!!
Click to expand...
Click to collapse
Pls anybody help me too! same problem stuck up and updating stops at 7%
giving ce rom update error?
Do a hard reset first and clear the phone by pressing 0 when promted
report back
kotabunga said:
I had removed SD card and SIM card, but it stil stuck at 10%. But if I updated the radio, it will finish 100%, whwn it comes to Ext Rom and CE update, it just finished at 10%. Did I Brick my uni ? anybody can help ?
Click to expand...
Click to collapse
Try to flash each part one at a time, not all of them at the same time.
Note that this ROM do not work with some extended rom and that blank page at first was the reason of that. Flash your extended rom with the tomal's own extended rom. You can find it...(oh no it has been removed, I will try to upload it for you). After flashing the extended rom try ato re-flash the rom and at last try to re-flash the radio (If you need it). Beware that flashing extended rom will erase your own extended rom so try to find one and decode its files to have your customization files back...
Hope it works
I have problem uploading file try to search for "Tomal_extrom" yourself and I will try to upload it...
Tried to flash Tomals ext ROM...but wont work too....I'm hopeless, maybe I should say goodbye to my uni,.....
same
ah i just got the tomal_extrom @ vidmes.com/xda
and now i am going to try with it will revert back
i did try the ext rom but the process failed.
can anybody help with mtty v1.16 as given in uni manual?
thnks for the help anyways buddys
digitalir said:
ah i just got the tomal_extrom @ vidmes.com/xda
and now i am going to try with it will revert back
i did try the ext rom but the process failed.
can anybody help with mtty v1.16 as given in uni manual?
thnks for the help anyways buddys
Click to expand...
Click to collapse
Seems your DOC is corrupted and unable to write.
Use mtty tool and re-format it, I'm pretty sure that everything will be OK then. But make sure that you have disabled AS before executing mtty!
pls give the action step by step, im very hopeless
tomal said:
Seems your DOC is corrupted and unable to write.
Use mtty tool and re-format it, I'm pretty sure that everything will be OK then. But make sure that you have disabled AS before executing mtty!
Click to expand...
Click to collapse
pls can u tell me the process to do it?
thnks
the wiki is your friend: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Do not try to use copy paste in MTTY, type every command.
Before doing this ( steps 1 to 17) beware that you must download an original rom to get the windows mobile rom, the radio rom and the extended rom ( see step 13).
Last time I took Tomal v8.2, his extended rom and radio 1.15, put all 3 in the RUU folder and runned the update utility. It will take arround 20 minutos to flash the 3 files. thx to TehPenguin you can get these files here: http://vidmes.com/xda/Uni/ROMs/Tomal/ and here: http://vidmes.com/xda/Uni/Radios/
Be advised that I've not read the other posts on the thread, so I don't know if you should try this process or not.
Cheers
ultravox said:
the wiki is your friend: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
Do not try to use copy paste in MTTY, type every command.
Before doing this ( steps 1 to 17) beware that you must download an original rom to get the windows mobile rom, the radio rom and the extended rom ( see step 13).
Last time I took Tomal v8.2, his extended rom and radio 1.15, put all 3 in the RUU folder and runned the update utility. It will take arround 20 minutos to flash the 3 files. thx to TehPenguin you can get these files here: http://vidmes.com/xda/Uni/ROMs/Tomal/ and here: http://vidmes.com/xda/Uni/Radios/
Be advised that I've not read the other posts on the thread, so I don't know if you should try this process or not.
Cheers
Click to expand...
Click to collapse
mtty do not format radio rom, so you don't need to re-flash it.
No progress
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
kotabunga said:
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
Click to expand...
Click to collapse
AS means active synchronize. Disable USB connection in AS. It has been written there bro...
kotabunga said:
digitalir, did you make any progress ? I'm not....
Tomal, what do you mean about AS ?
Thx
Click to expand...
Click to collapse
my friend,
active sync AS
ok
well i am just back on my chair so looking forward to do it right away
will keep u posted
tried ! but in vain!
yes i have already gone through the wikipage and tried it but after typing the command it just says its invalid command.
i have tried all the ways i can with mtty given in wikipage with no results positive.
pls can anybody suggest the commands for doc format
again thnks
hey!
after much gogling i got mtty1.16 and tried but it does not show the usb port.
so again googling does it support usb 2.0
i think it doesnt.
ok i will try on my old laptop with usb 1.1 tonight at home.
Tomal 1st thnks for ur help and valuable time
can u pls give the details for properly formatting the doc [pls.
any luck ? I dont....my uni still dead...tried with usb 1...no luck...
Hi,
Trying to Flash Hard SPL 3.56 to my T-mobile based tytn II. Everytime i go through the process (using Jump SPL) it fails at 0% with Error [262] Update Error.
Can anyone give me any pointers on where i might be going wrong? I am using Windows XP (first tried with a Vista laptop which had the same problem despite downgrading drivers to try to resolve).
As far as I can tell i've been following the guide properly.....
Thanks very much
Jason
Do you have .net installed in your machine?
jasonfrancis170 said:
Hi,
Trying to Flash Hard SPL 3.56 to my T-mobile based tytn II. Everytime i go through the process (using Jump SPL) it fails at 0% with Error [262] Update Error.
Can anyone give me any pointers on where i might be going wrong? I am using Windows XP (first tried with a Vista laptop which had the same problem despite downgrading drivers to try to resolve).
As far as I can tell i've been following the guide properly.....
Thanks very much
Jason
Click to expand...
Click to collapse
ask your question here http://forum.xda-developers.com/showthread.php?t=433835 and please don't start new threads
msd24200 said:
ask your question here http://forum.xda-developers.com/showthread.php?t=433835 and please don't start new threads
Click to expand...
Click to collapse
You read my head.......
Held back from posting earlier as didn't to be the first post of doom...
Mods please close.
Over/Under on posts before lock! 8
Apologies
Sorry about that everyone! I'll post in the right place now.
Jason