Crossbow Reloaded v1.5 and Email Vibration - 8125, K-JAM, P4300, MDA Vario ROM Development

I have a Cingular 8125 and I just did my first update. When I was on WM5 I use to get a vibrate alert when the phone was on or in standby mode. I installed Crossbow Reloaded v1.5 and now it only vibrates when the phone is on. Everything else works great and I am very happy with Crossbow Reloaded v1.5. When I am at work I turn off all sounds so I need the vibrate to work to know if I have mail. I spent all day setting up the phone so is there some registry fix or sometime I can do without having to redo everything again? Here is my info.
ROM Version: 2.18.0.0 WWE
ROM Date: 02/14/06
Radio Version: 02.19.11
Protocol: 4.1.13.09
ExtROM version: Faria V5.0
Thanks

Instead of starting a new thread, post your question on the existing Crossbow 1.5 thread.

Related

New BETA ROM: RUU-Prophet-AKU2.3-2.20-2.47.21-Jester-b3

Hi,
I've created another BETA ROM for the Prophet
This ROM will upgrade your SPL to 2.20.000 (Only G3 !)
This ROM will upgrade your Radio to 02.47.21
This ROM contains the stripped PDAMobiz Final AKU 2.3 OS
This ROM contains the stripped Qtek ExtRom (2.20.7.114)
This ROM has a changed CID (now 11111111) (This needs testing on G4)
This ROM has a standard page pool of 12MB
I've taken the base Qtek 2.20 OS and incorporated the AKU 2.3 files from the PDAMobiz OS, however, I've removed all the extra "junk" so this is a pretty clean ROM.
The ExtRom base came from the Qtek 2.20 ROM, however, it has the qtek links/images removed.
For the dutch users, i've patched this ROM so it doesn't change "wel" into "we'll" when you create an SMS
My ExtRom:
A2DP_Patch.cab
AutoRun.exe
Cert_SPCS.CAB
Config.txt
MP_Customization_Prophet_Qtek_WWE_051205.CAB
MP_CVSDcpl_20060220.cab
MP_mHub_WWE_060124-2.CAB
MP_MMSAutoDisconnect_060106.CAB
MP_SmartDialing_enable_0915_signed.CAB
MP-Shorcut-MMS1-Java5xx-CyberonVoice-CV-04Nov05.CAB
P_ECall_112_911_QTEK_Wizard.cab
P_PT_EnableSPN_Wizard_20060109.CAB
PP_DisconnectButton_16.CAB
PP_ExtVersion.CAB
PP_OperatorName.CAB
PP_Prophet-UAProf_AKU2.sa.CAB
Signed_A2DP_Cert.cab
What was changed over beta 2 you ask ?
well, I've ripped more crap out of the ROM and changed the stylus gif mentioned by lvsw.
Also, I've changed the G4 version, it does NOT include any SPL, hopefully this will make the ROM upgrade work (test this !)
Just download, run the file and after the upgrade is done, hard reset your Prophet (hold down both the camera and comm manager buttons on the side while pressing the reset button, hold the two buttons untill the screen comes up, then press the left green phone button)
As this is a BETA, please report any errors here, thanks
For G3 ONLY:
Removed, working on new version
For G4 ONLY:
Removed, working on new version
when i update, my xda neo doesn't start. it just shows the bootscreen with the 3 colors.
DocMAX said:
when i update, my xda neo doesn't start. it just shows the bootscreen with the 3 colors.
Click to expand...
Click to collapse
On G4 not working "ship-updater" with "mod-OS"!
Work only PDAmobiz updater
Jesterz, please, in extrom add MP_MMS-patch (patch for activation menu "MMS-config"). I can give you this cab!
lvsw said:
On G4 not working "ship-updater" with "mod-OS"!
Work only PDAmobiz updater
Jesterz, please, in extrom add MP_MMS-patch (patch for activation menu "MMS-config"). I can give you this cab!
Click to expand...
Click to collapse
Ok, thanks, I will repacked the G4 version.
I will check the MMS patch. anc create beta 4...
DocMAX said:
when i update, my xda neo doesn't start. it just shows the bootscreen with the 3 colors.
Click to expand...
Click to collapse
if your prophet is G4, try to fix the rom you want to upgrade with tool calls typho5 (same to Wizard G4). i've fixed already by that way. or email me ([email protected]) to get the rom i used
boongdang said:
if your prophet is G4, try to fix the rom you want to upgrade with tool calls typho5 (same to Wizard G4). i've fixed already by that way. or email me ([email protected]) to get the rom i used
Click to expand...
Click to collapse
Can you share what you did to get this ROM working please ?
I don't have a G4 so I can't test my ROMs on it
Thanks !
Jesterz said:
Ok, thanks, I will repacked the G4 version.
I will check the MMS patch. anc create beta 4...
Click to expand...
Click to collapse
Look attach
lvsw said:
Look attach
Click to expand...
Click to collapse
I got it already,but spasiba !
Beta 4 almost ready.
jester, would you say this version is better than RUU-Prophet-AKU2.2-2.20-2.47.21-Jester-b1.exe?
Stuck at bootup screen
I updated to this ROM, now my device is stucked at splash screen. The one that says..IPL 2.09, SPL 2.20.0000 , GSM 02.47.21
What do I do now? I tried hard resetting it but it gets stuck on the same screen. The upgrade went OK (100% with congrats..) How can I reverse to or update to another ROM if it can't establish a sync?
Thanks.
Tried it and didnt like it, still too much of PDAmobiz custom stuff around. Like doesnt delete cabs after install, has the gPS icon in settings, doesnt automatically bring up the keyboard when input is needed and some other nasty bits.
why cant they just give us an updated clean rom instead of trying to make things better.
Back to jesters awesome 2.2 rom.
download file?
Where is the link to download this file?

WM6 how to customize menu? Remove some network customization?

Hi,
I've successfully installed WM6 on my Cingular 8125. I installed the Crossbow version. Great stuff.
What wonder me is, some of my network stuff is still there in the menu (GetGood, ClearView PDF reader, etc) even though the apps are not there anymore. Try to dig the forum but can't find the way to remove them...
Any tip on removing those? My phone is Cingular but I'm on T-Mobile network now.
Thanks,
um.. which rom did u install there is about 10 wm6 roms now..
jacob-mda said:
um.. which rom did u install there is about 10 wm6 roms now..
Click to expand...
Click to collapse
I installed the Crossbow version with the extended ROM.
tempoct said:
I installed the Crossbow version with the extended ROM.
Click to expand...
Click to collapse
You don't have to be so explicit
I agree! My psychic advisor Miss Cleo got busted so's I have no way of knowing your device info ie IPL/SPL, GSM, OS ... catch my drift?
Everytime I've seen this happen it's been that the device isn't CID unlocked... everytime.
ah... pardon NOOB!
OS 5.2.318 (Build 15341.4.0.01)
ROM version: 2.18.0.0 WWE
ROM date: 2/14/06
Radio Version: 02.61.11
Protocol Version: 4.1.13.28
ExtROM version: 2.25.11.102
IPL/SPL: 2.25.0001
All downloaded and followed instruction in this thread;
http://forum.xda-developers.com/showthread.php?t=298967
Any recommendation? More info needed?
anyone?????
No way to get rid of Cingular bloatware??
OK, First I would redo everything (unlocking, etc) as per DrPuttingham above. If you really successfully flashed a custom rom, its unlikely the extended rom would have the Cingular stuff still there. If you are stubborn, and just want to get rid of the Cingular stuff, do a hard reset, and when you get the message saying 3 seconds to customize, do a soft reset before it starts (put the stylus in the reset hole). Then the extended rom will not load.
Good luck,
Re: Extended rom
OK, I want to amend what I said above. I checked my extended rom today and found that indeed the X-plore rom flash had *not* wiped the previous (T-Mobile 3.3 German) extended rom. So, I apologize. It appears to be at least more common than I thought. I have now gone back and done a hard-reset and soft-reset to remove the customizations from the T-Mobile 3.3 rom (which I actually hadn't noticed).
Thanks for teaching me about this. I'll be more careful in my own flashing from now on!
Regards,

Wifi Problems

Hi,
I have a prohpet which originally had the following firmwares etc:
IPL: 2.10
SPL: 2.10.0000
GSM: 02.07.20
OS: 2.10.7.27 NOR (Norwegian)
After following the instructions on how to first downgrade to wm5 (NoVendorId) and then upgrade to wm6 (I use pdaviet 4.0.0.4) my wifi stopped working. Nothing comes up in the list. Yes, I did do a hard reset, and yes I can access the wlan from my other phone. It didn't even work in the wm5 novendor version. Everything else seems to be working fine. Does anyone know what the problem can be? I even installed WifiFofum (http://www.aspecto-software.com/rw/applications/wififofum/) but that did not work either.
I would appreciate any help...
The new firmware etc is now:
IPL: 2.10
SPL: 2.20.0000
GSM: 2.61.21
OS: 4.0.0.4 PDAViet
when i was on PDAViet 4.0.0.0.4,i noticed that WiFi didn't turn on when i pressed the comm manager button... Instead,it turned 1-2 minutes later by itself.... So i went back to PDAViet 4.0.0.0.3a...
Will try...
OK, I will try to flash it with 4.0.0.3a later today.
BTW, how did you notice that wifi did not get turned on?
/Espen
Still not working...
I downgraded to 4.0.0.3a, and wlan is still not working. Any suggestions are welcome.
Still not working...
I think I have tried every possible rom now, and still no go on getting wlan/wifi to work. It just wont search or find any networks. If someone has the same problem or a solution, please let me know.
one solution could be to upgrade to radio 2.69 ¿?. well. you can try, at least this upgrade isn't so "destructive" as the ones you used previously
I tried that, and didn't work. Atlast I tried the AKU rom, and it bricked my rom. Now when it starts the radio does not show, and the os wont start. Tried to flash back with no luck.
wargamez said:
I tried that, and didn't work. Atlast I tried the AKU rom, and it bricked my rom. Now when it starts the radio does not show, and the os wont start. Tried to flash back with no luck.
Click to expand...
Click to collapse
Obviously, you have a phone got bad WiFi hardware if you said you couldn't get it working under WM5.
Look at it this way, these WM6 ROMs have come a long way. They still get bugs here and there, but if you still get one consistance WiFi problem, most likely is not the ROM causing it. You are hitting your head against a brick wall.

Does my tilt have the default rom and radio?

I bought a tilt off of ebay and I would like to know if it has the original rom and radio from att. When I click on About from Settings/System I get the following, CE OS 5.2.1620 (Build 18125.0.4.2). When I got to Device Information it says under Version ROM version: 1.57.502.2, ROM date: 08/25/07, Radio version: 1.27.12.11, Protocol version: 22.45.88.07H. Any help would be appreciated.
The reason I am asking is that I am having an issue with seeing any programs in Remove Programs. The more frusteration issues is that because of this I cant install or uninstall any of the loaded programs on it. When I got the phone there were no issues, and then all of a sudden one day vola. If this is all default, can I hard reset my phone and then try a restore from my sprite backups? I have already tried a restore with older backups and the problem is still there.
gehcmatt said:
I bought a tilt off of ebay and I would like to know if it has the original rom and radio from att. When I click on About from Settings/System I get the following, CE OS 5.2.1620 (Build 18125.0.4.2). When I got to Device Information it says under Version ROM version: 1.57.502.2, ROM date: 08/25/07, Radio version: 1.27.12.11, Protocol version: 22.45.88.07H. Any help would be appreciated.
The reason I am asking is that I am having an issue with seeing any programs in Remove Programs. The more frusteration issues is that because of this I cant install or uninstall any of the loaded programs on it. When I got the phone there were no issues, and then all of a sudden one day vola. If this is all default, can I hard reset my phone and then try a restore from my sprite backups? I have already tried a restore with older backups and the problem is still there.
Click to expand...
Click to collapse
Hi:
Yes, those are the original ATT ROM and Radio.
Not sure about your other issues, sorry.
I'm sure someone with more knowledge will come along to help you
gehcmatt said:
I bought a tilt off of ebay and I would like to know if it has the original rom and radio from att. When I click on About from Settings/System I get the following, CE OS 5.2.1620 (Build 18125.0.4.2). When I got to Device Information it says under Version ROM version: 1.57.502.2, ROM date: 08/25/07, Radio version: 1.27.12.11, Protocol version: 22.45.88.07H. Any help would be appreciated.
The reason I am asking is that I am having an issue with seeing any programs in Remove Programs. The more frusteration issues is that because of this I cant install or uninstall any of the loaded programs on it. When I got the phone there were no issues, and then all of a sudden one day vola. If this is all default, can I hard reset my phone and then try a restore from my sprite backups? I have already tried a restore with older backups and the problem is still there.
Click to expand...
Click to collapse
Yes if you already have a backup on you pc you should be able to hard reset. Also after you hard reset and if you don't want all the extra apps on it, you should reset the phone when its going through the customization process. pretty much after you go through the screen alignment, date, password etc. Right after this do a reset and you want have all the AT&T boat load of software. Then you can install what you want.

HELP: Restoring Sprite Backup after ROM upgrade

Hello,
i have a great problem . First i made a backup with Sprite BAckup and my kaiser had:
ROM: 1.56.412.4
Radio: 1.27.12.11
Then I did an ROM upgrade to:
ROM: 3.29.00.00
Radio: 1.65.17.56
Protocol: 25.83.40.02H
That was ok, and then y restore the Sprite backup, but i think it changed the OS registry or another item, but when it power off and now i try to power on the kaiser it doesn't work, i view only the HTC symbol, but no the windows mobile 6.1 logo.
It' doesn't connect by Active Sync and i can't do anything with it.
Could anybody help me, please??????
Regards
Jorge
__________________
Kaiser
ROM: 3.29.00.00
Radio: 1.65.17.56
Protocol: 25.83.40.02H
Sprite backups can only be restored to the same ROM. The easiest thing for you to do is a HARD RESET, which will reset the current ROM to all defaults and you should be able to boot back into the device. You just have to make whatever changes you had in your old ROM on the new ROM.
Again, do no attempt to restore the backup. If you want to restore the backup, you need to re-flash the old ROM and restore.
Thanks,
i have done the HARD RESET and installed the new ROM again and it's ok.
ecltech said:
Sprite backups can only be restored to the same ROM. The easiest thing for you to do is a HARD RESET, which will reset the current ROM to all defaults and you should be able to boot back into the device. You just have to make whatever changes you had in your old ROM on the new ROM.
Again, do no attempt to restore the backup. If you want to restore the backup, you need to re-flash the old ROM and restore.
Click to expand...
Click to collapse
Not entirely true. The newer Sprite backup (not the oem one that comes with the tilt) allows for 3 or 4 levels of restoration...including one level that is made specifically for cross rom upgrades (ie from L26's v9 to garmin 1.2) and another for upgrades with the same rom type (ie upgrading from garmin 1.1 to garmin 1.2). I dont think that this was present in the older version.
jorgim said:
Hello,
i have a great problem . First i made a backup with Sprite BAckup and my kaiser had:
ROM: 1.56.412.4
Radio: 1.27.12.11
Then I did an ROM upgrade to:
ROM: 3.29.00.00
Radio: 1.65.17.56
Protocol: 25.83.40.02H
That was ok, and then y restore the Sprite backup, but i think it changed the OS registry or another item, but when it power off and now i try to power on the kaiser it doesn't work, i view only the HTC symbol, but no the windows mobile 6.1 logo.
It' doesn't connect by Active Sync and i can't do anything with it.
Could anybody help me, please??????
Regards
Jorge
__________________
Kaiser
ROM: 3.29.00.00
Radio: 1.65.17.56
Protocol: 25.83.40.02H
Click to expand...
Click to collapse
I goto the same problem just a week ago....
and i also tried migration facility ( offered thru Sprite 6.22 Version ) But bottom line is - you have to install everything again after reflashing the new RUU... All you can recover safely is your PIM data... thats all
Once again, not entirely true, it depends on where software makes its changes. I have plenty of apps that get restored (most with serials still intact) after using sprite 6.2.2

Categories

Resources