Hi,
I have a prohpet which originally had the following firmwares etc:
IPL: 2.10
SPL: 2.10.0000
GSM: 02.07.20
OS: 2.10.7.27 NOR (Norwegian)
After following the instructions on how to first downgrade to wm5 (NoVendorId) and then upgrade to wm6 (I use pdaviet 4.0.0.4) my wifi stopped working. Nothing comes up in the list. Yes, I did do a hard reset, and yes I can access the wlan from my other phone. It didn't even work in the wm5 novendor version. Everything else seems to be working fine. Does anyone know what the problem can be? I even installed WifiFofum (http://www.aspecto-software.com/rw/applications/wififofum/) but that did not work either.
I would appreciate any help...
The new firmware etc is now:
IPL: 2.10
SPL: 2.20.0000
GSM: 2.61.21
OS: 4.0.0.4 PDAViet
when i was on PDAViet 4.0.0.0.4,i noticed that WiFi didn't turn on when i pressed the comm manager button... Instead,it turned 1-2 minutes later by itself.... So i went back to PDAViet 4.0.0.0.3a...
Will try...
OK, I will try to flash it with 4.0.0.3a later today.
BTW, how did you notice that wifi did not get turned on?
/Espen
Still not working...
I downgraded to 4.0.0.3a, and wlan is still not working. Any suggestions are welcome.
Still not working...
I think I have tried every possible rom now, and still no go on getting wlan/wifi to work. It just wont search or find any networks. If someone has the same problem or a solution, please let me know.
one solution could be to upgrade to radio 2.69 ¿?. well. you can try, at least this upgrade isn't so "destructive" as the ones you used previously
I tried that, and didn't work. Atlast I tried the AKU rom, and it bricked my rom. Now when it starts the radio does not show, and the os wont start. Tried to flash back with no luck.
wargamez said:
I tried that, and didn't work. Atlast I tried the AKU rom, and it bricked my rom. Now when it starts the radio does not show, and the os wont start. Tried to flash back with no luck.
Click to expand...
Click to collapse
Obviously, you have a phone got bad WiFi hardware if you said you couldn't get it working under WM5.
Look at it this way, these WM6 ROMs have come a long way. They still get bugs here and there, but if you still get one consistance WiFi problem, most likely is not the ROM causing it. You are hitting your head against a brick wall.
Related
Please help. I wqas trying to update my radio rom to 1.13 but the error 114 appeared and asked me to disconnect my imate jam and do a soft reset. I did that but its stuck with blank screen that shows SERIAL ta the top of the screen and V1.02 at the bottom. I tried removing the battery and replacing it back but it still shows the black screen.. now im stuck please help...
Have you tried hard resetting at the bootloader screen (this is the SERIAL
screen)
Hard reset is:
__ + __ + Reset button
hi
i tried hard resetting but it didnt make any difference.. now i nearly had a heart attack... what i did was reconnected my imate to my pc and ran the rom update again... to my surprise it did the update then asked me to hard reset... thats it my radio version in now updated... now im going to observe its behaviour first before installing everything again...
cheers
Good to hear, looks like everything went fine.
What ROM are you using? Just curious
Jorgee said:
Good to hear, looks like everything went fine.
What ROM are you using? Just curious
Click to expand...
Click to collapse
hi its:
Rom Version 1.12.00WWE
Rom Date May 28, 2005
Radio Version 1.12.10
Protocol Version 1337.42
ExtRom Version 1.12.171WWE
now im reverting back to the original rom version then ill update the radio version with 1.13 just in case i made a bad patch cos of disconnecting it during update.. :lol:
ayos to!
It looks like you are using a very old rom, BTW, the newest RADIO is 1.04.10....
Do you have a Vodafone v1640?
no i am using imate new jam. imate says it has the latest rom version.
Oh, sorry i thought it was a Universal....
Well hope everything is now okay
Hello this is my first post.
I have recently been trying out various WM6.1 roms and now have the issue where I can only use GSM (G3 and HSPDA just don't work)
I have tried various radios and downgrading to a reconstructed stock rom. However nothing seems to work. From reading other threads it seems to be a hardware issue, so I need to restore it back to the original settings for repair.
I have the original OS on now, but need to now put back on the original radio and SPL version; however I don't know which versions these are. Also I have a custom start screen so need to go back to the original T-mobile one as well. Any help on how to do this would be appreciated.
Thanks.
I had a problem like you aswell; after upgradig my sound just went away, even after installing the radio. What I did was flash my TYTN2 with the official 6.1 rom (radio included). It's in of the threads, I don't think it'll take you too long to find it =)
Hope that helps!
I have tried various combinations of the original (6.1 and T-mobile) roms and radios and nothing seems to work.
I think that one of the radio roms may have fried my G3/HSPDA chip. GSM works fine but I bought the phone for hi speed data and now can't use it. If any one knows a software fix for this it would be billiant. However at the moment I think I will have to wait until T-mobile bring out a rom so I can restore the SPL & splash screen from that. (hope that wont be to long)
Any other suggestions welcome as I will try anything to get this problem sorted.
idenmark said:
I have tried various combinations of the original (6.1 and T-mobile) roms and radios and nothing seems to work.
I think that one of the radio roms may have fried my G3/HSPDA chip. GSM works fine but I bought the phone for hi speed data and now can't use it. If any one knows a software fix for this it would be billiant. However at the moment I think I will have to wait until T-mobile bring out a rom so I can restore the SPL & splash screen from that. (hope that wont be to long)
Any other suggestions welcome as I will try anything to get this problem sorted.
Click to expand...
Click to collapse
Radio 1.27.12.11 should work fine
How did this finish? Have you sent back your device or did you have it working? Did you find, if yes, where did you find the SPL and Splash screen?
Let me know, thanks in advance!
I decided to wait until the new T-mobile rom came out with proper SPL / Radio, and just stick with GSM.
I couldn't find either the proper SPL or splash screen. I think these need to be extracted from a proper T-mobile ROM.
However after 4 days G3/HSPDA just started working again. I didn't change the rom or radio (just stuck with Sluth's WM6.1). I must conclude that it was something to do with T-mobiles network settings that they resolved.
Hey Guys,
I set my Polaris back to Original ROM (WM6.0)[GERAMN] (http://forum.xda-developers.com/archive/index.php/t-379796.html) everything worked, but then I noticed that the polaris goes in "stand-by-mode" and the screen is black. Normally I push the on/off-button to turn on the display but this doesn't work any more. Also the buttons arn't working... Only a Soft-Reset helps...
Can anybody help me?
thx
I had it too. Do you have the latest radio rom installed?
1.59.42.15? My device does it with that radio.
NeoS2007 said:
I had it too. Do you have the latest radio rom installed?
1.59.42.15? My device does it with that radio.
Click to expand...
Click to collapse
My Radio-ROM is: 1.58.21.23
ROM-VERSION: 1.25.407.1 GER
Do you have a Step-by-Step instruction how to reflash everything back to the original GERMAN ROM (also SPL-SCREEN), because of the warrenty?!
SPL-SCREEN shows:
POLA100 MFG
SPL-2.20.OliNEx
CPLD-2
i have solved the probelm.
i installed a RADIO: 1.58.26.20
but the reception (GSM) is very bad...
any help?
I had this problem, sent phone back to O2, if you find out what radio gives a good signal I would be very interested, as you can read from my thread I have lost signal all together since receiving phone back
I have sort of the same problem, my polaris is in Spanish.
I figured out that the problem was in the usb connection.
Its very rare, but it works.
I have to use the phone with the checkbox of the "enable advanced network funcions" checked. That is in Settings, connections, usb to pc (or something like that, again, my phone is in spanish)...
If i uncheck that, when the phone enters in the sleep state, it hangs and never wakes up.
I hope this is usefull.
Chears.
Multiple Errors...
Hey Guys!
I use the XDA Orbit2 (polaris) with the 1.64.08.21 Radio and the latest german udK ROM.
The Screenerror disappears after flashing the udK ROM and the bad Radio with flashing the 1.64.08.21.
The screen thing is in my oppinion only an O2 error, and the radio thing is an HTC bug.
So try to flash and be happy!
But read the "HOWTO to HARDSPL" your device and "HOWTO FLASH"!!
Without you could brick your device!!
So far
Frank
e.g. everything you do with your device is on your on risk!!!
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
i was needing this help so much, please help me guys, i tested my chip on another mobile and worked the edge
Be sure to flash Hard SPL before you do anything!!!!!
After you do that, you can go ahead and flash.
If I were you, I'd flash a different radio to see if it works better, I recommend .28, .32, and the .19 test.
If that doesn't work then let us know.
basmareck said:
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
Click to expand...
Click to collapse
I cannot say if your radio is the problem. If you're installing an official HTC or provider ROM, you do not need HardSPL. If you want to install a cooked one here off XDA, you do. This great guide will help you flash a cooked ROM and/or radio: http://forum.xda-developers.com/showthread.php?t=448008
You're right, if you flash a radio, then you will not lose anything in your Storage Memory. If you flash a ROM, you will, so be sure to back up your PIM. PPCPimBackup does a great job for that, you can find it at d0ugie's site: http://blownfuze.org/ Your contacts and calendar should come back right away after the restore, but the messages take a while to rebuild, so don't touch it for at least 15 mins after the reboot.
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
basmareck said:
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
Click to expand...
Click to collapse
By default, you cannot flash anything but an HTC or provider ROM; you cannot flash radios either. You have to flash HardSPL before you flash a custom ROM or a radio.
Have you tried running SSPLManual.exe as outlined in the guide above, step 2 note 2?
Hello,
I am experiencing random freezes with almost any WM6.$ ROM i flash it with.
My current setup is:
HardSPL 3.56
Radio Version: 1.65.21.18
ROM Version: Anryl 21500 rev6
I have also tried Medkid's versions, 1.33, 1.62, 1.62F
Ill give wjtk's version a try today see how this goes.
The problem is, that it will freeze on stupid times, while its a clean installation. e.g. yesterday Medkid's 1.62F froze up on me when i tried to change the time. Then it needed a soft reset through the button, it froze on the boot screen (the one that shows the radio version etc etc) had to soft reset again through the button and i somehow hard reset it that way...
Any ideas?
(Im pretty sure i have CID unlocked it, is there any way to check it?)
Thanks in advance,
Andrew
dumraden said:
Hello,
I am experiencing random freezes with almost any WM6.$ ROM i flash it with.
My current setup is:
HardSPL 3.56
Radio Version: 1.65.21.18
ROM Version: Anryl 21500 rev6
I have also tried Medkid's versions, 1.33, 1.62, 1.62F
Ill give wjtk's version a try today see how this goes.
The problem is, that it will freeze on stupid times, while its a clean installation. e.g. yesterday Medkid's 1.62F froze up on me when i tried to change the time. Then it needed a soft reset through the button, it froze on the boot screen (the one that shows the radio version etc etc) had to soft reset again through the button and i somehow hard reset it that way...
Any ideas?
(Im pretty sure i have CID unlocked it, is there any way to check it?)
Thanks in advance,
Andrew
Click to expand...
Click to collapse
This subject has been covered many many times, there really was no need to start yet another thread on it.
Try flashing cmonex's 3.29hard s Spl., it is a patched spl for random freezes.
http://rapidshare.com/files/191032042/Cmonex_s_HardSPL3.29_SD.zip
6.5 is still in development so it can't be error free no matter you change the radio's, SPL's. But our master chefs are really working hard to outperform MS guyz.
denco7 said:
This subject has been covered many many times, there really was no need to start yet another thread on it.
Try flashing cmonex's 3.29hard s Spl., it is a patched spl for random freezes.
http://rapidshare.com/files/191032042/Cmonex_s_HardSPL3.29_SD.zip
Click to expand...
Click to collapse
sakshamkatyal said:
6.5 is still in development so it can't be error free no matter you change the radio's, SPL's. But our master chefs are really working hard to outperform MS guyz.
Click to expand...
Click to collapse
Well said guys.. closing thread as answers are out there without a new thread