What's diff. between IPL/SPL 2.26 with 3.08? - 8125, K-JAM, P4300, MDA Vario ROM Development

I use Cingular 8125 with IPL/SPL 2.26 and OS Xplore 1.1 and Radio 2.19.
Now I down load IPL/SPL 3.08 should I upgrade ornot?
Thanks

Related

IPL 1.000 ????? Any problem to upgrade to AKU3.3????

i find that the number of IPL shown in bootloader is 1.000....
IPL 1.000
SPL 2.15.000
GSM 02.19.21
OS 2.15.23.27
is there any problem to upgrade to AKU3.3.?....
i did a little search in this forum...and IPL for the others are always 2.xx.00x...
i know that i have a G3 modal....and i 've unlock the CID...(but i wonder if i did it successfully...)...
push~...help me
I've experienced it but no solution unfortunately...​
There should be no problem, just make sure you update to a 2.20 ROM first before you start upgrading to an AKU3.x or WM6 ROM
My IPL after unlocking and upgrading to WM6 remains 1 but SPL is 2..how to make both of them 2?​
I posted IPL 2.10 for G3 search for it
nope...no problem at all...
mine had a plan upgrade IPL/SPL to 3.08
haven't tried it...
but mine already aku 3.3
it works fine..as he said,don't forget upgrade to aku 2.2 as "starters"
what's the purpose and benifit to ungrader over IPL 1.0?
exe read what do IPL and SPL mean in the WIKI, it is like the BIOS of the mainboard in PC, basic inpot output system
I did as you suggested and found nothing regarding IPL SLP in the wiki. Lots of link on there does not display anything when clicked.

IPL/SPL Benefits

I currently have IPL/SPL: 2.26 is it good to upgrade IPL/SPL to 3.08 i see alot of people have this. WM6 on my G3 Wizard. Can someone tell me what is the benefit of having IPL/SPL 3.08.... SIM/CID Unlocked.
i kno that when u update your IPL/SPL to 3.08 when you turn it on it starts the phone up faster...less time with splash screens...**(but it does boost your phone speed overall...i think...so small u would barely notice tho...)**
** - not sure
I dont suppose any of you guys have IPL/SPL v 2.xx to pass on do you ?? Or know where i can get hold of such? I tried to upgrade my miniS to WM6 but used the IPL/SPL 3.08 as i couldnt find v2. now i cant get the wm6 rom to take.
cheers. ANdy
It comes with the t-mobile rom.
http://forum.xda-developers.com/showthread.php?t=305225

Cingular 8125 CAMERA LED FLASH WORK ON WM6

Hi,actually i am planing to UPGrade my cingular 8125 FROM wm5 to wm6 so i am bit confuced for some resions i need some help 1st my camera led flash will work on WM6 if yes how i do Upgrade
Cingular 8125
IPL/SPL 2.25
GSM 02.25.11
OS 2.25.11.1
Dont know CID locked or UNLOCK
Yes your flash will work and read this link on how to upgrade. http://forum.xda-developers.com/showthread.php?t=298613

Cannot upgrade to any WM6

Hi guys.
I have this iMate Kjam (Not mine). It was with a T Mobile Official ROM and has IPL/SPL at v2.26. I checked and there was no G4 sign anywhere. Someone had to remove the CID thing to this. I downloaded several WM6 ROMs but once the complete flashing and the device reboots, I'm still in the T-Mobile ROM. I down-flashed to the age-old Button Love WM5 base ROM and here is the ROM status:
IPL: 1.01
SPL: 2.26
GSM: 1.12.10
OS: 1.5.4.2
If I upgrade from this point with, let's say, TNT5.0, here is what happens:
IPL: 1.01
SPL: 2.26
GSM: 1.12.10
OS: 1.5.4.2
Same right? but all the graphics change when booting. There is the HTC logo when device is turned on and there is the TNT 5.0 "BOOM" title when OS is loading (with the IPL/SPL/GSM/Radio)
Can someone tell me what is going on? HardSPL (http://forum.xda-developers.com/showthread.php?t=332320) clearly tells me that device is NOT G4
Doomer D. Great said:
Hi guys.
I have this iMate Kjam (Not mine). It was with a T Mobile Official ROM and has IPL/SPL at v2.26. I checked and there was no G4 sign anywhere. Someone had to remove the CID thing to this. I downloaded several WM6 ROMs but once the complete flashing and the device reboots, I'm still in the T-Mobile ROM. I down-flashed to the age-old Button Love WM5 base ROM and here is the ROM status:
IPL: 1.01
SPL: 2.26
GSM: 1.12.10
OS: 1.5.4.2
If I upgrade from this point with, let's say, TNT5.0, here is what happens:
IPL: 1.01
SPL: 2.26
GSM: 1.12.10
OS: 1.5.4.2
Same right? but all the graphics change when booting. There is the HTC logo when device is turned on and there is the TNT 5.0 "BOOM" title when OS is loading (with the IPL/SPL/GSM/Radio)
Can someone tell me what is going on? HardSPL (http://forum.xda-developers.com/showthread.php?t=332320) clearly tells me that device is NOT G4
Click to expand...
Click to collapse
Update:
I was able to install the official T-Mobile ROM onto Button Love ROM. Here is the screen statistics:
IPL: 2.26
SPL: 2.26
GSM: 02.25.11
OS: 2.26.10.2
If I try to upgrade to WM6 now, nothing will happen as I've already tried. After the flash process, it will still be official TMobile...
What should I do now? If I compare the properties of this Wizard with my own, I'm pretty sure this should be a G4 device.
Flash Buttons ROM again and do a CID unlock. That's it! Have fun!
I have a G3, but I had to flash Button twice so that the IPL/SPL matched, then I unlocked and reflashed 2.26 stock (again be sure that IPL/SPL match numbers), then from there I joined rom flashers anonymous!
akashastrega said:
I have a G3, but I had to flash Button twice so that the IPL/SPL matched, then I unlocked and reflashed 2.26 stock (again be sure that IPL/SPL match numbers), then from there I joined rom flashers anonymous!
Click to expand...
Click to collapse
Trying the Button Love ROM the third time... the SPL just won't drop... whats going on?
Cyberdyne said:
Flash Buttons ROM again and do a CID unlock. That's it! Have fun!
Click to expand...
Click to collapse
The only avaliable HardSPL tool doesn't recognize the device as G4... so how do I forced CID unlock? I tried SoftSPL... but at that time, my IPL and SPL were different...
Lets face the situation
IF you have
IPL 2.26 or 1.xx
SPL 2.26 or 2.XX
You have a G3 device - forget do not use Hard SPL or Soft SPL, these are ONLY FOR G4 DEVICES
Since you have a G3 Device you have 2 options
If you have IPL 1.xx and SPL 2.xx . use WST (Wizard Service Tools) to unlock your CID device
http://forum.xda-developers.com/showthread.php?t=329170
Note that only with IPL 1.xx you are hable to unlock your CID with WST
If you have IPL 2.xx and SPL 2.xx, than you must downgrade both to IPL/SPL 1.xx with an official ROM
Before you do something, install WST in you PC, and check the real situation of your device
Pisca said:
Lets face the situation
IF you have
IPL 2.26 or 1.xx
SPL 2.26 or 2.XX
You have a G3 device - forget do not use Hard SPL or Soft SPL, these are ONLY FOR G4 DEVICES
Since you have a G3 Device you have 2 options
If you have IPL 1.xx and SPL 2.xx . use WST (Wizard Service Tools) to unlock your CID device
http://forum.xda-developers.com/showthread.php?t=329170
Note that only with IPL 1.xx you are hable to unlock your CID with WST
If you have IPL 2.xx and SPL 2.xx, than you must downgrade both to IPL/SPL 1.xx with an official ROM
Before you do something, install WST in you PC, and check the real situation of your device
Click to expand...
Click to collapse
Excellent.
If I'm on Button Love ROM, I have IPL v1.x ad SPL v2.x
Should I upgrade to WM6 from here?
If not, then I have to upgrade to Officia T-Mobile ROm. Then IPL/SPL = v2.26 but WM6 won't flash...
Ah ! c'mon guys
Give this guy a break.
Doomer D. Great
Go read and fully undrstand this guide to CID unlock your phone and upgrade.
BTW,its a G3 phone you got there,forget anything about G4,you are only concern shud be regarding G3 device.
Doomer D. Great
Go read and fully undrstand this guide to CID unlock your phone and upgrade.
BTW,its a G3 phone you got there,forget anything about G4,you are only concern shud be regarding G3 device.
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
zabardast_1 said:
Doomer D. Great
Go read and fully undrstand this guide to CID unlock your phone and upgrade.
BTW,its a G3 phone you got there,forget anything about G4,you are only concern shud be regarding G3 device.
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Click to expand...
Click to collapse
Actually, I followed what Pisca said about using WT and it worked... in Button Love, I finally CID unlocked and upgraded to Official TMobile. Then TNT5.0. All Well
Thank you very much!
Problem solved
Doomer D. Great said:
Excellent.
If I'm on Button Love ROM, I have IPL v1.x ad SPL v2.x
Should I upgrade to WM6 from here?
If not, then I have to upgrade to Officia T-Mobile ROm. Then IPL/SPL = v2.26 but WM6 won't flash...
Click to expand...
Click to collapse
Ok, if you are on IPL 1.xx and SPL 2.xx, you can use WST-Wizard Service Tool 4.2.2 to CID unlock
Then you should load a carrier ROm T-Mobile to get IPL/SPL 2.xx
But allways read as mentioned in the previous post
Doomer D. Great said:
Actually, I followed what Pisca said about using WT and it worked... in Button Love, I finally CID unlocked and upgraded to Official TMobile. Then TNT5.0. All Well
Thank you very much!
Problem solved
Click to expand...
Click to collapse
Great forget my last post

I have a Problem

Hello, My English is not please not bad so well thus its. I am quite again and have several questions. Which is IPL and SPL on the boat screen on my MDA Vario? I wanted it gladly bottles however it went not as I wanted. My Bootscreem data is:
IPL 1.01
SPL 3.08
GSM 02.25.11
OS 2.26.10.2
If you have downgraded by flashing Button's Rom 1.05 for CID unlocking,then reflash the button's rom once more to get SPL 1.xx also and use lokiwiz02 tool to CID unlock,otherwise download WST_4.2.2 from the below link and run it to CID unlock the phone,after that upgrade to IPL/SPL 2.xx by flashing T-Mobile 2.26 or any AKU 2 official rom and than you can upgrade to any wm6.1 latest roms.
WST_4.2.2 :-
http://forum.xda-developers.com/showthread.php?t=329170

Categories

Resources