Hi all I'm still newbie in this forum.
I have a MDA Vario T-Mobile I bought it from my friend (2nd hand), now its used a iMate ROM. I don't know which ROM that he used to upgrade the PDA.
I want to ask can I upgrade my MDA to WM6? When I resest my MDA it displayed:
IPL 1.01
SPL 1.06
GSM 01.01.10
OS 1.1.9.3
What should I prepared to upgrade my MDA to WM6? Thanks before.
Regards
Dari mana?
From the looks of your IPL and SPL, seems to be a G3... so not a problem...
from wiki
A G3 Wizard will have the following
IPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.).
SPL: 1.xx or 2.xx or 2.xx.00x (Note that this version only has TWO 0's.)
A G4 Wizard will have the following
IPL: 2.xx.000x (Note that this version has THREE 0's.)
SPL: 2.xx.000x (Note that this version has THREE 0's.)
@new2city
Dari Bali-Indonesia.
So what (file) should I prepared to upgarde my ROM to WM6?
Oh I forget I have another problem. Why my MDA when sync with my PC sometimes disconnect by itself, now it's more worst I can't sync my MDA to my PC. I used Active Sync 4.0 Windows 2000 SP4.
HELP....SOS....
macam ni, susah sikit.. (dari Malaysia)
I don't know but after reading so many brick units, maybe it is better you do a hard reset and see if it solves your Active Sync connection problems before attempting an upgrade..
My MDA now can connect.
@new2city
If I want to upgrade to WM6 what should I prepared? How I can know my MDA wa CID unlocked? I read on Faria WM6 thread we must have 2xxx bootloader version. I don't know how we can know our bootloader version? And the last question I want to know how to hard reset my MDA?
Thanks
http://forum.xda-developers.com/showthread.php?t=298613
If I want to used faria ROM I read it must be 1.xx version. When I read in http://forum.xda-developers.com/showthread.php?t=298613 we must update to T-Mobile 2.26. What should I choose still in 1.xx ot upgrade to 2.26?
kumis_merah said:
If I want to used faria ROM I read it must be 1.xx version. When I read in http://forum.xda-developers.com/showthread.php?t=298613 we must update to T-Mobile 2.26. What should I choose still in 1.xx ot upgrade to 2.26?
Click to expand...
Click to collapse
you have to upgrade using that 2.26 rom!!! If you dont BEWARE the Devil will come for you
Ya you have to or you could just brick your phone! You have to have IPL/SPL above 2.00. The rom 2.26 as above will give you IPL/SPL 2.26.
And before you try to flash make sure you have read all you can, cus it does not always go right first time and you need to know what to do if you have a problem.
If you start flashing and it reset. Dont think it is dead try below
Hold the button voice button and press the reset button, when it sorts its self out you should have a screen with 3 colors. Connect your USB and flash away but use a non cooked rom. Flash T-mobile 2.26 again
I once had to re-flash my phone 6 times before I was happy! Then found out that i could have sored the problem by using a reg key!! LOL oh well!
I have already SPL 1.06 and IPL 1.01 can I directly unlock my MDA using lokiwiz? No need to downgrade to button ROM.
Thanks to the answer this forum rocks....
kumis_merah said:
I have already SPL 1.06 and IPL 1.01 can I directly unlock my MDA using lokiwiz? No need to downgrade to button ROM.
Thanks to the answer this forum rocks....
Click to expand...
Click to collapse
If you are still on IPL/SPL 1.XX
you should be able to unlock it with the lokiwiz software.
enjoy
Thanks guys now I'm on Faria ROM real thing but I'm still confused about my MDA why everytime I want to sync I must replace the USB cable more than two times to get syncronize with my PC. Some times it disconnect by it self, than I must reconnect again. Anyone know what happen to my MDA?
I have a Cingular 8125 locked G4 to cingular. Can I flash 2.26 IPL/SPL on it? how about SPL/IPL3.08?
Not unless you want an expensive paperweight.
My 8125 is perfect example of doing that .......So please don't try.
Thanks
Thanks. I will live with 2.25 and if I use that website unlock what are the chances for flashing roms directly and flash IPL/SPL too?
I currently have IPL/SPL: 2.26 is it good to upgrade IPL/SPL to 3.08 i see alot of people have this. WM6 on my G3 Wizard. Can someone tell me what is the benefit of having IPL/SPL 3.08.... SIM/CID Unlocked.
i kno that when u update your IPL/SPL to 3.08 when you turn it on it starts the phone up faster...less time with splash screens...**(but it does boost your phone speed overall...i think...so small u would barely notice tho...)**
** - not sure
I dont suppose any of you guys have IPL/SPL v 2.xx to pass on do you ?? Or know where i can get hold of such? I tried to upgrade my miniS to WM6 but used the IPL/SPL 3.08 as i couldnt find v2. now i cant get the wm6 rom to take.
cheers. ANdy
It comes with the t-mobile rom.
http://forum.xda-developers.com/showthread.php?t=305225
Hi guys.
I have this iMate Kjam (Not mine). It was with a T Mobile Official ROM and has IPL/SPL at v2.26. I checked and there was no G4 sign anywhere. Someone had to remove the CID thing to this. I downloaded several WM6 ROMs but once the complete flashing and the device reboots, I'm still in the T-Mobile ROM. I down-flashed to the age-old Button Love WM5 base ROM and here is the ROM status:
IPL: 1.01
SPL: 2.26
GSM: 1.12.10
OS: 1.5.4.2
If I upgrade from this point with, let's say, TNT5.0, here is what happens:
IPL: 1.01
SPL: 2.26
GSM: 1.12.10
OS: 1.5.4.2
Same right? but all the graphics change when booting. There is the HTC logo when device is turned on and there is the TNT 5.0 "BOOM" title when OS is loading (with the IPL/SPL/GSM/Radio)
Can someone tell me what is going on? HardSPL (http://forum.xda-developers.com/showthread.php?t=332320) clearly tells me that device is NOT G4
Doomer D. Great said:
Hi guys.
I have this iMate Kjam (Not mine). It was with a T Mobile Official ROM and has IPL/SPL at v2.26. I checked and there was no G4 sign anywhere. Someone had to remove the CID thing to this. I downloaded several WM6 ROMs but once the complete flashing and the device reboots, I'm still in the T-Mobile ROM. I down-flashed to the age-old Button Love WM5 base ROM and here is the ROM status:
IPL: 1.01
SPL: 2.26
GSM: 1.12.10
OS: 1.5.4.2
If I upgrade from this point with, let's say, TNT5.0, here is what happens:
IPL: 1.01
SPL: 2.26
GSM: 1.12.10
OS: 1.5.4.2
Same right? but all the graphics change when booting. There is the HTC logo when device is turned on and there is the TNT 5.0 "BOOM" title when OS is loading (with the IPL/SPL/GSM/Radio)
Can someone tell me what is going on? HardSPL (http://forum.xda-developers.com/showthread.php?t=332320) clearly tells me that device is NOT G4
Click to expand...
Click to collapse
Update:
I was able to install the official T-Mobile ROM onto Button Love ROM. Here is the screen statistics:
IPL: 2.26
SPL: 2.26
GSM: 02.25.11
OS: 2.26.10.2
If I try to upgrade to WM6 now, nothing will happen as I've already tried. After the flash process, it will still be official TMobile...
What should I do now? If I compare the properties of this Wizard with my own, I'm pretty sure this should be a G4 device.
Flash Buttons ROM again and do a CID unlock. That's it! Have fun!
I have a G3, but I had to flash Button twice so that the IPL/SPL matched, then I unlocked and reflashed 2.26 stock (again be sure that IPL/SPL match numbers), then from there I joined rom flashers anonymous!
akashastrega said:
I have a G3, but I had to flash Button twice so that the IPL/SPL matched, then I unlocked and reflashed 2.26 stock (again be sure that IPL/SPL match numbers), then from there I joined rom flashers anonymous!
Click to expand...
Click to collapse
Trying the Button Love ROM the third time... the SPL just won't drop... whats going on?
Cyberdyne said:
Flash Buttons ROM again and do a CID unlock. That's it! Have fun!
Click to expand...
Click to collapse
The only avaliable HardSPL tool doesn't recognize the device as G4... so how do I forced CID unlock? I tried SoftSPL... but at that time, my IPL and SPL were different...
Lets face the situation
IF you have
IPL 2.26 or 1.xx
SPL 2.26 or 2.XX
You have a G3 device - forget do not use Hard SPL or Soft SPL, these are ONLY FOR G4 DEVICES
Since you have a G3 Device you have 2 options
If you have IPL 1.xx and SPL 2.xx . use WST (Wizard Service Tools) to unlock your CID device
http://forum.xda-developers.com/showthread.php?t=329170
Note that only with IPL 1.xx you are hable to unlock your CID with WST
If you have IPL 2.xx and SPL 2.xx, than you must downgrade both to IPL/SPL 1.xx with an official ROM
Before you do something, install WST in you PC, and check the real situation of your device
Pisca said:
Lets face the situation
IF you have
IPL 2.26 or 1.xx
SPL 2.26 or 2.XX
You have a G3 device - forget do not use Hard SPL or Soft SPL, these are ONLY FOR G4 DEVICES
Since you have a G3 Device you have 2 options
If you have IPL 1.xx and SPL 2.xx . use WST (Wizard Service Tools) to unlock your CID device
http://forum.xda-developers.com/showthread.php?t=329170
Note that only with IPL 1.xx you are hable to unlock your CID with WST
If you have IPL 2.xx and SPL 2.xx, than you must downgrade both to IPL/SPL 1.xx with an official ROM
Before you do something, install WST in you PC, and check the real situation of your device
Click to expand...
Click to collapse
Excellent.
If I'm on Button Love ROM, I have IPL v1.x ad SPL v2.x
Should I upgrade to WM6 from here?
If not, then I have to upgrade to Officia T-Mobile ROm. Then IPL/SPL = v2.26 but WM6 won't flash...
Ah ! c'mon guys
Give this guy a break.
Doomer D. Great
Go read and fully undrstand this guide to CID unlock your phone and upgrade.
BTW,its a G3 phone you got there,forget anything about G4,you are only concern shud be regarding G3 device.
Doomer D. Great
Go read and fully undrstand this guide to CID unlock your phone and upgrade.
BTW,its a G3 phone you got there,forget anything about G4,you are only concern shud be regarding G3 device.
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
zabardast_1 said:
Doomer D. Great
Go read and fully undrstand this guide to CID unlock your phone and upgrade.
BTW,its a G3 phone you got there,forget anything about G4,you are only concern shud be regarding G3 device.
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Click to expand...
Click to collapse
Actually, I followed what Pisca said about using WT and it worked... in Button Love, I finally CID unlocked and upgraded to Official TMobile. Then TNT5.0. All Well
Thank you very much!
Problem solved
Doomer D. Great said:
Excellent.
If I'm on Button Love ROM, I have IPL v1.x ad SPL v2.x
Should I upgrade to WM6 from here?
If not, then I have to upgrade to Officia T-Mobile ROm. Then IPL/SPL = v2.26 but WM6 won't flash...
Click to expand...
Click to collapse
Ok, if you are on IPL 1.xx and SPL 2.xx, you can use WST-Wizard Service Tool 4.2.2 to CID unlock
Then you should load a carrier ROm T-Mobile to get IPL/SPL 2.xx
But allways read as mentioned in the previous post
Doomer D. Great said:
Actually, I followed what Pisca said about using WT and it worked... in Button Love, I finally CID unlocked and upgraded to Official TMobile. Then TNT5.0. All Well
Thank you very much!
Problem solved
Click to expand...
Click to collapse
Great forget my last post
Hello, My English is not please not bad so well thus its. I am quite again and have several questions. Which is IPL and SPL on the boat screen on my MDA Vario? I wanted it gladly bottles however it went not as I wanted. My Bootscreem data is:
IPL 1.01
SPL 3.08
GSM 02.25.11
OS 2.26.10.2
If you have downgraded by flashing Button's Rom 1.05 for CID unlocking,then reflash the button's rom once more to get SPL 1.xx also and use lokiwiz02 tool to CID unlock,otherwise download WST_4.2.2 from the below link and run it to CID unlock the phone,after that upgrade to IPL/SPL 2.xx by flashing T-Mobile 2.26 or any AKU 2 official rom and than you can upgrade to any wm6.1 latest roms.
WST_4.2.2 :-
http://forum.xda-developers.com/showthread.php?t=329170