Related
I found two days ago that doing a WM6 ROM upgrade on my Jasjar via a PC running VISTA Ultimate, the device got stuck in BootLoader Mode.
I have Bootloader v2.01 on my device.
The only way to recover was to attach the Jasjar to a PC running XP and then start from scratch.
I tried it again today and got the same result!
I recommend NOT to upgrade ROM on a PC running VISTA.
I hope this helps someone, somewhere.
Thankyou to all the gods that walk amongst us monkeys.
Drongo said:
I found two days ago that doing a WM6 ROM upgrade on my Jasjar via a PC running VISTA Ultimate, the device got stuck in BootLoader Mode.
I have Bootloader v2.01 on my device.
The only way to recover was to attach the Jasjar to a PC running XP and then start from scratch.
I tried it again today and got the same result!
I recommend NOT to upgrade ROM on a PC running VISTA.
I hope this helps someone, somewhere.
Thankyou to all the gods that walk amongst us monkeys.
Click to expand...
Click to collapse
There is a thread about upgrading with Vista in the General part of the Universal forum... there are drivers supplied there to upgrade with Vista, some are successful.
where is this thread?
http://forum.xda-developers.com/showthread.php?t=291723
Seek and ye shall find
ooooo thanks
hi. i have the same problem. i try to upgrade from vista my spv m5000 and now the pc don't recognise the device, and i can't woork with the ppc. it simply don't start.
can you give me any solution?
thanks
paulo
never upgrade your ROM in Vista 32 0r 64bit doesn't work at all or may kill your device.
Windows Xp is the way to update ROM
I upgrade fine using vista but you must use the guide to do it right
OMG it is finally updating. Using XP.
Got stuck in bootloader after trying to flash from Vista. Thought I "bricked" (as you guys almost universally put it) the thing. Fixes didn't work (I already had the USB Modem driver installed, mtty didn't see any USB connection, and so on...)
Connecting to an XP laptop and works perfectly.
In Vista, in the boot loader mode you have to use the old XP drivers dated 2004. When you put your Universal in the boot loader and connect to your PC under Vista, than under device manager the USB driver must be 2004. If not then you have to install the old 2004 driver.
KOR!
Hi guys,
can someone help me ?
I want to flash my XDA Neo with a new ROM (WM6)
However,
I have successfully connected my Phone with ActiveSync 4.5 on WinXP SP2
Then I run an RUU Utility.
The Phone goes into Bootloader (RGB Screen) and then the connection is lost.
From then I couldn't etablish a connection to the Phone.
Is there another way to flash the ROM of my Phone ? e.g. from SD Card directly ?
Any help appreciated - thx
Flashx4u said:
Hi guys,
can someone help me ?
I want to flash my XDA Neo with a new ROM (WM6)
However,
I have successfully connected my Phone with ActiveSync 4.5 on WinXP SP2
Then I run an RUU Utility.
The Phone goes into Bootloader (RGB Screen) and then the connection is lost.
From then I couldn't etablish a connection to the Phone.
Is there another way to flash the ROM of my Phone ? e.g. from SD Card directly ?
Any help appreciated - thx
Click to expand...
Click to collapse
I would join to this question - I have the same problem: somewhere in the middle of flashing my Prophet with Prophet_PV_Temp my Prophet started a dead-cycle with connecting-disconnecting...And I can not reflash it. Now I also have Bootloader (RGB screen) which is on when Prophet is not connected to PC and when I connect it to PC, it disconnects-reconnects-disconnects-reconnects-......
What is the solution?
The problem SOLVED!
ZRimaZ said:
I would join to this question - I have the same problem: somewhere in the middle of flashing my Prophet with Prophet_PV_Temp my Prophet started a dead-cycle with connecting-disconnecting...And I can not reflash it. Now I also have Bootloader (RGB screen) which is on when Prophet is not connected to PC and when I connect it to PC, it disconnects-reconnects-disconnects-reconnects-......
What is the solution?
Click to expand...
Click to collapse
So ,finally I found the solution with this issue and problem with my Prophet's restarting after it's registering to the cellular network (I wrote about it in another treeds as well).
After I tried to reflash my Prophet with different WM6 ROMs, different Radio ROMs, reassembled and cleaned it, reflashed to original WM5 ROM and nothing helped, I just came to an idee to replace the battery, unless Prophet indicated that still it's a lot of power (min 50%)...I ordered the battery and when I received it and replaced, everything is running as it should be!!!!
Hi my Qtek 9000 doesn't work anymore after installation of Ranju_v77_WM61_19900_19900_1_0_2.
it never finished it.
but when i try to recovery on qtek or with the pc, with the Ranju installation program.
it also said don't look weird if you only got usb with the version number on your pda screen.
that window comes after if the installation failed, but when i try to back it up the program stops working.
so now i can't use my pda please help me.
Greetz, (n00b)
pommie said:
Hi my Qtek 9000 doesn't work anymore after installation of Ranju_v77_WM61_19900_19900_1_0_2.
it never finished it.
but when i try to recovery on qtek or with the pc, with the Ranju installation program.
it also said don't look weird if you only got usb with the version number on your pda screen.
that window comes after if the installation failed, but when i try to back it up the program stops working.
so now i can't use my pda please help me.
Greetz, (n00b)
Click to expand...
Click to collapse
Hi,
The answers you seek are in the WIKI.
Hold the backlight + power button whilst resetting the device. This will put you back into bootloader mode, you can then reflash the Rom.
I would also advise that you SuperCid your device before flashing any Roms, if you haven't done so already.
Again this is documented in the Wiki.
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Cheers,
Beasty
my screen show me serial v1.01 and if i put the usb cable in it shows me usb v1.01
on my pc it installed as microsoft usb sync, but it won't connect on windows mobile device center.
so i can't use mtty even if i unselect usb in windows mobile device center i still can't select usb in mtty ive tried few times to delete and reinstall on my pc but still does not work.
pommie said:
my screen show me serial v1.01 and if i put the usb cable in it shows me usb v1.01
on my pc it installed as microsoft usb sync, but it won't connect on windows mobile device center.
so i can't use mtty even if i unselect usb in windows mobile device center i still can't select usb in mtty ive tried few times to delete and reinstall on my pc but still does not work.
Click to expand...
Click to collapse
The problem is Vista!
Search the forum and you will find a post with a fix (old drivers) for Vista, or just use a Windows XP or previoous MS OS to flash your device.
I would suggest XP if you plan to keep flashing in the near future
do i need to super cid my htc universal in order to upgrade to ranju v77. my universal is branded dopod 900 and can use with any simcard. thanks
lucky for me, i also got a pc with xp sp2 but my pda works with ranju v77 thnx man.
only from nokia phones i can't send file with bluetooth, phones like samsung works fine
Attached you find all you need to flash cooked ROMs on your Dash3G (Maple).
The sspl/hardspl are confirmed to work fine on the HTC Maple platform (Dash3G, SNAP S520, SNAP S521). Any phone that says MAPL1XX under the battery should work just fine with the sspl and hardspl. This has been tested by oOkBa yesterday night. His cooked roms flash extremely fast and he noticed no problems except for the splash screens. Apparently HTC changed the format slightly. Should be easy to tackle and has nothing to do with the sspl/hardspl.
Now for the bad news ... It will not work on the HTC Cedar platform (GSM/CDMA, HTC Ozone XV6175, Verizon). Running the sspl on an Ozone will definitely brick it. Also the HTC Willow platform (SNAP S511, Sprint) is not supported. Please see this post for more info and how you can help.
There are 2 packages both contain a SSPL, HardSPL, patched ROM updater and the original Maple SPL. The first package is based on SPL 1.17 (tested by oOkBa) and the second is based on SPL 1.19 (tested by Gawain1986)
Instructions:
1. remove SD and SIM cards (don't forget otherwise the sspl is likely not to work!!)
2. connect your device to your pc with a USB cable and wait until it is synced
3. extract the file "Dash3G HardSPL by JockyW.zip" and execute "auto.bat"
4. follow all instructions given on screen: first the sspl is copied to the device and executed. You must confirm running JumpSPL on the device: first time you must click Yes to allow it to run, you also must click the trackball to continue execution of JumpSPL. The device display will turn dark and after that the romupdate tool will install the hardspl on your device. (the identification string in the tri-color bootloader screen is "1.17.hard")
5. if you have difficulties to install 1.17 then try 1.19
6. to test the sspl and the hardspl you can flash the attached splash.nbh
Once the HardSPL is installed on your device you can flash any Maple cooked or original ROM.
Have fun,
JockyW
Excellent work!! JockyW is the man! Please donate to a great cause! This now opens the door to amazing possibilities! Thank you thank you!!
ookba said:
Excellent work!! JockyW is the man! Please donate to a great cause! This now opens the door to amazing possibilities! Thank you thank you!!
Click to expand...
Click to collapse
couldnt of said it better myself..
oo..
my Snap 526 is MAPL110..
should i gib it a shot?
but i need a plan b in case something goes wrong.. any idea how to hard reset the snap with the scrollball?
I have the same mapple, ithink it's ok.
before running this file, do we have to dump the rom? and do we have to use the spl backup kit berfore?
(sorry for all these questions)
First of all, there's really no need to run this yet until there are custom ROMS to flash. If you want to simply test or prep, go for it. I can confirm it works in a MAPL100 so I don't see why any other device with MAPL1XX should be an issue. I will build some factory ROMS as well as some custom cooks in the next days for you guys to play with and test.
see i dont think alot of the new people understand the process.
the spl does nothing more than ENABLE ur device for a rom, thats it!
nothing fantastic, its not a completely diff o.s. on ur device..just preps it for whats to come.
what happend with my device today was a fluke!
i was testing and working at the same time..i could have missed a step, one of my work programs on my laptop could have set something off..i dunno.
Bricking usually isnt a part of getting a SPL for a device..just ALOT of testing. SO now is the another part of the process..the waiting process. Waiting for a rom cooker to successfully establish something, test it, and release it.
in this game..u need patience.
So I;ve been trying this and it seems something is going wrong...
Ik run auto.bat, JumpSPL gets copied and started, the device screen goes black, and when I reconnect the USB cable to get the "Smartphone Sync" driver working, my Windows 7 install tells me that there is something wrong with the USB device.
It will then refuse to use any driver I try to add to the device.
Any thoughts?
PS. It's a SNAP S521 (MAPL110)
EDIT: Windows XP x64 has the same problem.
Gawain1986 said:
Ik run auto.bat, JumpSPL gets copied and started, the device screen goes black, and when I reconnect the USB cable to get the "Smartphone Sync" driver working, my Windows 7 install tells me that there is something wrong with the USB device.
Click to expand...
Click to collapse
First, this has not yet been tested on Win7. Second, it should not be necessary to unplug and replug the cable. Try again and just wait a minute or so to allow Win7 to install the driver. Other thing you can do to make sure the driver is already installed is to put the phone in bootloader mode and connect it by usb cable.
ps: it is normal the display turns dark after running the sspl
ok, i understand there are 3 steps. but I would like to know how to do the first one:
dumping my rom.
First I entered the bootload by holding the volume down button and turning the device on...
It said:
Code:
MAPL110
SPL-1.19.0000
MicroP-Maple (LED) v6
ENGID 0x2
PCBID 0x80
PanelInfo 15-0x2
I connected it to the computer and it recognised the Qualcomm phone immediately and settled on the HTC USB Sync driver.
Then I restarted the phone and connected it again, ran auto.bat... it ran SSPL again and I waited.
So after I tried waiting for 5 minutes, WIndows 7 did not see a new device, it stayed with it's normal RNDIS driver.
So I took the plunge and ran the RUU, which told me it could not connect to the phone.
I unplugged the phone and replugged it and it said there was an error regarding the USB device.
Can it be that because my SPL version is higher than the HardSPL or SSPL, that it's getting into conflict with itself?
Hi,
First thanx for your hard working.
I got some trouble when trying to install the Hard SPL.
My SNAP from france, S521 Mapl100 under the Battery; Just HTC no operator
I launched the auto.bat
The device display turned dark and tri-color bootloader screen said "1.19.hard
The flashing process start and stuck at 0%
Unplugged the USB and the phone restart well.
Is this Hard SPL
Enter bootloader. If you see "1.17.Hard" the HardSPL is succesfully installed and you can flash any cooked and official roms in the near future.
Fabtwone said:
Hi,
First thanx for your hard working.
I got some trouble when trying to install the Hard SPL.
My SNAP from france, S521 Mapl100 under the Battery; Just HTC no operator
I launched the auto.bat
The device display turned dark and tri-color bootloader screen said "1.19.hard
The flashing process start and stuck at 0%
Unplugged the USB and the phone restart well.
Is this Hard SPL
Click to expand...
Click to collapse
Gawain1986 said:
Can it be that because my SPL version is higher than the HardSPL or SSPL, that it's getting into conflict with itself?
Click to expand...
Click to collapse
Please first try it on WinXP before we draw wrong conclusions.
Good work jocky - nice to see you about again
Thread Stuck.
Dave
jockyw2001 said:
Please first try it on WinXP before we draw wrong conclusions.
Click to expand...
Click to collapse
Did that immediately after I posted... it just keeps telling me the USB device is "malfunctioning" somehow...
Gawain1986 said:
Did that immediately after I posted... it just keeps telling me the USB device is "malfunctioning" somehow...
Click to expand...
Click to collapse
Ok, if there are similar problems i can try to build a sspl based on 1.19
Please dump it and attach (see first post for the link to the dump kit)
To anyone who has problems, please look up your current SPL version.
(press volume down and power on).
Is there anyone who succesfully flashed the HardSPL where the old SPL version was 1.18.00 or higher?
jockyw2001 said:
Ok, if there are similar problems i can try to build a sspl based on 1.19
Please dump it and attach (see first post for the link to the dump kit)
Click to expand...
Click to collapse
Here you go...
http://www.mediafire.com/?sharekey=cb564520d236e90090a82c7bb0fad7ade04e75f6e8ebb871
Gawain1986 said:
Here you go...
http://www.mediafire.com/?sharekey=cb564520d236e90090a82c7bb0fad7ade04e75f6e8ebb871
Click to expand...
Click to collapse
Try the attached sspl which is based on your v1.19 SPL.
Run sspl.bat (preferrably in XP)
I'm sorry, but the new 1.19 SSPL is not working either. The phone stays in the black screen and both Windows XP x64 and Windows 7 x86 keep telling me the USB device is malfunctioning.
I have had some experience with unlocking my previous Tornado, VOX, Kaiser and X1 and I'm pretty sure I need to see a tri-color scren when invoking JumpSPL.
So maybe that's the problem?
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
tljubas said:
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
Click to expand...
Click to collapse
Download and install Windows mobile device center
ducbinh.vn said:
Download and install Windows mobile device center
Click to expand...
Click to collapse
incorrect....you need to download Windows XP mode from Microsoft online(search it on google) then run the installler, etc... then run Windows XP mode, plug in your phone through USB and in the top corner of the Windows XP mode under the USB tab click attach "wizard usb serial" or whatever is the appropriate name.Hope that helps!!!
Nope, when RUU starts to do the upgrade, Conection fails on Windows XP mode, axactly the same on Win7. The solution? Good old fashioned Win XP.
CAPHI said:
Nope, when RUU starts to do the upgrade, Conection fails on Windows XP mode, axactly the same on Win7. The solution? Good old fashioned Win XP.
Click to expand...
Click to collapse
When i used xp mode i found that in order to have a successful flash you must hard reset your phone before you flash, mount the device with the RUU running from the desktop, and once the RUU begins you must remount your device once it gos into the boot screen(it shows up as unidentified...but its the one highest up in the list)then your device will do its thing and then you magically have a new ROM! Hope this helps, and yes obviously Windows XP is a better solution but the thread is updating a ROM on Windows 7...
OK, i got it... im downgrading my PC to Windows XP SP3...
Thanks guys
no need to downgrade OS, use vmware to install XP inside it
my IPL/SPL 2.24. how can i know if it is CID unlocked or not??
tljubas said:
Hi, Im new to this forum and Im interested in putting a new ROM on my Wizard.
On my PC i have the new Win7 Ultimate.
How does the process ofputting a new ROM on my phone go on my windows??
Thank you, regards
Click to expand...
Click to collapse
hi download windows mobile device center 6.1 from ms i have it much better then active syn no need to load xp or anything so the member thats said its incorrect is wrong
grtz cyber weesje
BASSMANBOB said:
incorrect....you need to download Windows XP mode from Microsoft online(search it on google) then run the installler, etc... then run Windows XP mode, plug in your phone through USB and in the top corner of the Windows XP mode under the USB tab click attach "wizard usb serial" or whatever is the appropriate name.Hope that helps!!!
Click to expand...
Click to collapse
he is right your incorrect windows mobile device center 6.1 no need to downgrade or load the xp virtual unit for that i use it daily and many ohters active syn is old ms even stopt working on it
grtz weesje
tljubas said:
my IPL/SPL 2.24. how can i know if it is CID unlocked or not??
Click to expand...
Click to collapse
When your Wizard is starting up, there comes a screen with in the left up corner some info like CID etc. When your Wizard is CID unlocked, then there behind CID x.xx.olip.
I know that it works with a g4 version of the wizard. Look around for more info
Edit: This is only when you succesfully installed Hardspl
I just flashed a rom on my p3300 yesterday and I did it on Windows 7 ultimate.. For me it was working just like that..
Today I will try my fathers Wizard on it
**edit**
No luck on Windows 7 installing WM6.5 on the wizard..
I installed XP on VMware and that worked for me..
Used activesync 4.5 on it.. Installed the CR96 WM6.5 of Cracing
Works like a charm!!
So yeah... Install VMware, that will be the best way to flash your Wizard.
Holla!