Database Info

Tilt Bricked?

Possibly the fastest phone brick in history... I did everything wrong...
AT&T Tilt, Windows Vista host machine
I ran the SSPL, NOT the Hard-SPL...
16% thru it failed
Rebooted, tri color screen, but not the same extact screen I had seen after running the SSPL on my Tilt.
Hard Reset, said yes take me to factory settings, back to same tricolor screen
Plugged it into a XP box, drivers installed, plugged in USB (it shows USB connection on the screen) Activesync of course wont go green
Loaded both the Kraiser rom and the Cingular rom, both fail at 1% and reboot the device and same invalid device ID..
Any ideas, aside from I'm a r-tard?

I ran the Hard-SPL on my HTC and it worked as it should. I'd say give that a shot, THEN try flashing the ROM of your choice.
-Mc

Problem is, when I run hard spl it expects activesync to be running, but in bootloader mode AS doesnt connect so Hardspl wont load =/

- Disable activesync usb connections
- Connect to bootloader with mtty and type the following commands to know your CID and Model ID:
Code:
Cmd>task 32
Cmd>info 2
Cmd>getdevinfo
Paste the output here, and also tell me which SPL version you have on your device.
Also, does the tri-color shows "RUURUN" or similar in the screen?
You should flash a ROM matching your CID to fix it.

Cmd>task 32
No card inserted
Level = FF
Cmd>info 2
HTCSCWS__001Ùü¤HHTCE
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSKAIS1*00CS_0HTCE
Cmd>
Device screen says
RUUNBH
KAIS1*0
SPL-1.56.0000
CPLD-8

Flash this ROM, should bring it back to life.

I'm leeching it now, 40% done, also FYI, I've posted on the Official ROM forum new links to most utilities and ROMs hosted on my servers off the rapidshare, to share free of charge.

Ahh, life saver =) Thanks, I'll be sure to add that rom to my list of full Kraiser roms on my web server, now to correctly flash it back with the HTC rom.
Thanks!

Same problem as TS. Bigger problem ... does anyone have the Dutch ROM?
Tnx!

I got the same problem as Palmore. After 16%, stuck, then bricked. I am downloading the ROM pointed by POF (thanks man!!) hopefully will unbrick it. Now, how do we get the HTC Kaiser ROM on this thing? Anyone?

It's on my phone. Tell me how do dump it and I ll send it to you.
Wouter
Lukstra said:
Same problem as TS. Bigger problem ... does anyone have the Dutch ROM?
Tnx!
Click to expand...
Click to collapse

ludovich said:
I got the same problem as Palmore. After 16%, stuck, then bricked. I am downloading the ROM pointed by POF (thanks man!!) hopefully will unbrick it. Now, how do we get the HTC Kaiser ROM on this thing? Anyone?
Click to expand...
Click to collapse
Run the Hard-SPL utility on your PC, and follow the instructions (sticky on this forum)
It will allow you to flash any ROM after that, I've flashed the AT&T Rom, the HTC rom and back and forth, pulling cabs out of the AT&T rom for the items I like (IM utility etc)

Palmore said:
Possibly the fastest phone brick in history... I did everything wrong...
AT&T Tilt, Windows Vista host machine
I ran the SSPL, NOT the Hard-SPL...
16% thru it failed
Rebooted, tri color screen, but not the same extact screen I had seen after running the SSPL on my Tilt.
Hard Reset, said yes take me to factory settings, back to same tricolor screen
Plugged it into a XP box, drivers installed, plugged in USB (it shows USB connection on the screen) Activesync of course wont go green
Loaded both the Kraiser rom and the Cingular rom, both fail at 1% and reboot the device and same invalid device ID..
Any ideas, aside from I'm a r-tard?
Click to expand...
Click to collapse
If you are a r-tard, it must be catching - same situation here at 16% and 1% now......

andydempsey said:
If you are a r-tard, it must be catching - same situation here at 16% and 1% now......
Click to expand...
Click to collapse
LIFE SAFVER

nispen said:
It's on my phone. Tell me how do dump it and I ll send it to you.
Wouter
Click to expand...
Click to collapse
Hi Wouter,
I bought a new Kaiser today (yes now I have two of them ).
I will see if I can dump the Dutch ROM myself and see what happens next.
Thanks for your help anywhy!
- Lucas

Bricked
Ok, so here is my situation. I have a Tilt and Vista.
I ran HardSPL and I am at the tri-color screen. I have:
KAIS1*0
SPL-1.JumpSPL
CPLD-8
USB (in the middle of the screen)
I tried disconnecting and reconnecting it several times. I cant get HardSPL to run again (it hangs at the first section looking for ActiveSync) I tried restarting Vista several times. I can NOT turn off my device, as holding down the power button does not appear to work.
I have tried just running a couple of .exe roms (AKU 0.7.0 ROMS) and I get the connection error [264]. I cant re-establish my ActiveSync connection. In device Manager I have Microsoft USB Sync for the mobile device, but I cant get ActiveSync (Mobility Center) to see it.
I have tried opening MTTY to run "boot" but it says USB Port Can NOT be opened.
I just need some direction here, as it seems like everything hinges on my ActiveSync connection. I have been up and down the Wikis for Hermes and all the similar ones, and I think I am SOL.
I WILL GLADLY DONATE if thats what it takes for someone to help me. Thanks guys, I cant wait for my HTC Rom to work.

Vista Problem.
First off, i had the same problem as you so i just found an XP box to use.
Second, even with XP i still managed to **** up because i did not read the directions all the way through. This device is totally different so make sure you read all the directions.
If you have no access to an XP machine then u can just "obtain" a copy of XP and dual boot just for flashing your device.
If you have no idea what I am saying then read some more. the hermes forums have some great information when it comes to flashing via Vista.

For all you guys that just saved between $300.00-$500.00. How about sending POF like %5 or %10 of what he just saved you...
I'm just sayin'
Later, Lew

Have you installed the XP activesync drivers under Vista? The Hermes Wiki mentions somewhere how to do that.
Jabbs19 said:
Ok, so here is my situation. I have a Tilt and Vista.
I ran HardSPL and I am at the tri-color screen. I have:
KAIS1*0
SPL-1.JumpSPL
CPLD-8
USB (in the middle of the screen)
I tried disconnecting and reconnecting it several times. I cant get HardSPL to run again (it hangs at the first section looking for ActiveSync) I tried restarting Vista several times. I can NOT turn off my device, as holding down the power button does not appear to work.
I have tried just running a couple of .exe roms (AKU 0.7.0 ROMS) and I get the connection error [264]. I cant re-establish my ActiveSync connection. In device Manager I have Microsoft USB Sync for the mobile device, but I cant get ActiveSync (Mobility Center) to see it.
I have tried opening MTTY to run "boot" but it says USB Port Can NOT be opened.
I just need some direction here, as it seems like everything hinges on my ActiveSync connection. I have been up and down the Wikis for Hermes and all the similar ones, and I think I am SOL.
I WILL GLADLY DONATE if thats what it takes for someone to help me. Thanks guys, I cant wait for my HTC Rom to work.
Click to expand...
Click to collapse

Best Forum Ever
I
I got it working. I had to pull the battery out of the phone to get it out of bootloadr, it was just plain stuck. Then, in Vista, I needed to F8, disable driver enforcement, I replaced the wceusbh.inf in device manager, and relaunched HardSPL and there she was! Now for the BigStorage.
Thanks to all that helped, I will be donating pof for sure

Tilt / HardSPL solution not working for display driver 1.82.00 Kaiser

First of all, I wish to say thanks to jockyw2001 for coming up with a solution for all those 1.56/1.57 Tilts. You guys all got a Merry Christmas... you lucky SOBs. Haha
However, there are newer versions of the Kaiser/Tilt coming out with 1.82.00 display versions and the current fix for 1.56/1.57 do not work. They get to the WSOD and stall.
I may be one of the first to have a 1.82.00 phone - I understand that it is the latest version put out by HTC, but I won't be the last. So I am hoping that jockyw2001 reads this thread and will continue to work on finding solutions for these newer versions of the Kaiser.
@jockyw2001
I've got a bounty for you if you can figure this one out... I need to switch from Traiditonal Chinese (which my phone came with) to the WWE ROM to be able to use this phone. Thanks a bunch beforehand!
Michael

Mike some questions:
1. did you try 1.93 (i posted in the original thread)?
2. do you see tri-color with any of the versions you tried?
3. do you see "USB" on the display after a few seconds? If yes with which version?
4. do you see "unrecognized device" after unplug and replug usb cable? or do you see MS sync device in device manager?
5. do you have MTTY up and running?
Note that you should always run the SSPL with USB cable connected!!

Answer to your questions...
jockyw2001 said:
Mike some questions:
1. did you try 1.93 (i posted in the original thread)?
2. do you see tri-color with any of the versions you tried?
3. do you see "USB" on the display after a few seconds? If yes with which version?
4. do you see "unrecognized device" after unplug and replug usb cable? or do you see MS sync device in device manager?
5. do you have MTTY up and running?
Note that you should always run the SSPL with USB cable connected!!
Click to expand...
Click to collapse
A1. I did try 1.93 and I still got WSOD, I lost USB connectivity at that point
A2. No tri-color screen with 1.56, 1.93 or the original HardSPL v1
A3. I do not see "USB" anywhere, the connection goes dead at WSOD
A4. No and no.
A5. I got MTTY 1.42 and tried it, but I'm not sure I'm using it correctly. I'll have to re-read some posts for that.
Thanks for the followup. I'll try and figure out MTTY and get back to you on this.
Michael

good luck to ya..
i am sure it ll just be a matter of time before u get a solution, he is pro and before u know it u will be part of the flashing world here on xda..
the team here on xda rocks..!!

a in yul said:
i am sure it ll just be a matter of time before u get a solution, he is pro and before u know it u will be part of the flashing world here on xda..
the team here on xda rocks..!!
Click to expand...
Click to collapse
Thanks for the well wishes... I have faith in these guys based on the body of work that is available here. Almost every HTC phone ever made has been hacked so I know it's a matter of time before they get this one sorted out.
Michael

Hi dear,
I have the same problem.
During the installation of Hardspl on my new Tilt, the PDA doesn't go in Bootloader mode (3 colors screen) but stop it in a white screen......and I can only make a soft reset to continue to use it.
I have read something about these new version of Kaiser but I need to reflash my Tilt.
Is there someone who know the way to resolve this problem?
I'll post my Boot version shortly....
Thanks and regards
Daniele

I have a 1.57 (from the ROM version in Device Information, right?) Tilt that's new (stock at&t ROM without the customizations). I get the WSOD using both the methods of doing the HardSPL. I was hoping to start fooling around with my new toy!
I'll re-read the forum, but my experience seems consistent with the people in this thread.
TTFN

If I have some time left today I will post another patched SPL.
Oh yeah it *does* cost time ya know ...

You wouldn't happen to be able to pull your existing Traditional Chinese ROM off of that their badboy would you?
I'd really like getting my hands on a chinese ROM for the IME.

Please try the attached file. Follow the instructions exactly!!
The only thing I'd like to know is if display is tri-color and if "USB" appears.
Don't do anything else with it!
- download the attached file
- REMOVE SIM and SD CARDS !!
- connect usb cable
- copy sspl-1.16-test-on-kaiser.exe to your device and run it (leave usb cable connected!)
- screen should be tri-color and after a few seconds "USB" should appear on the display

display is tri-color and "USB" appears
Orange Tytn II French version HSPL 1.81
The test is ok ...

Patrick27 said:
Orange Tytn II French version HSPL 1.81
The test is ok ...
Click to expand...
Click to collapse
Thx, will wait for feedback from the original poster.
Do you actually have trouble running pof's SSPL and my SSPL 1.56 ??

re 1.81
it is ok with 1.56

Chinese ROM
ouminan said:
You wouldn't happen to be able to pull your existing Traditional Chinese ROM off of that their badboy would you?
I'd really like getting my hands on a chinese ROM for the IME.
Click to expand...
Click to collapse
I guess I'll have to go check some threads about how to dump the ROM on the Kaiser. I thought I saw an HTC traditional chinese ROM on one of the links for the Kaiser though. I'll have a look. If not, I'll do my best to dump this bad boy for you.
Michael

Hi there,
I just tried your new test file on my 1.57 Tilt and followed your instructions exactly. It worked. I get the tri-color screen and it says USB on it. It also says:
KAIS1*0
SPL-1.16.Jump
CPLD-0
Thank you for your efforts... no more WSOD!
So, is that it or is there another step? I'm not sure.
TTFN

greggerca said:
Hi there,
I just tried your new test file on my 1.57 Tilt and followed your instructions exactly. It worked. I get the tri-color screen and it says USB on it. It also says:
KAIS1*0
SPL-1.16.Jump
CPLD-0
Thank you for your efforts... no more WSOD!
So, is that it or is there another step? I'm not sure.
TTFN
Click to expand...
Click to collapse
Yes sounds like progress
With this 1.16 do you see "unrecognized device" after unplug and replug usb cable? or do you see MS sync device in device manager?
Can you also try with 1.93 from this post please.
@MikeLim: did u try?

1.16 Did not work...
jockyw2001 said:
Please try the attached file. Follow the instructions exactly!!
The only thing I'd like to know is if display is tri-color and if "USB" appears.
Don't do anything else with it!
- download the attached file
- REMOVE SIM and SD CARDS !!
- connect usb cable
- copy sspl-1.16-test-on-kaiser.exe to your device and run it (leave usb cable connected!)
- screen should be tri-color and after a few seconds "USB" should appear on the display
Click to expand...
Click to collapse
jockyw2001,
I followed your instructions to the letter but still ended up on WSOD. After about 15 seconds the USB connection times out and dies. Back to the drawing board
Michael

Just for info, I noticed this thread whilst looking for a solution to my WSOD, my Kaiser is 1.88.00.00 - (UK Orange) I used the JumpSPL1.56-kais on mine, and it worked fine, Tri-Color - USB, then installed
Also, I can tell you that so far, I have been unable to SIM-unlock via IMEI-Unlock.

MikeLim said:
jockyw2001,
I followed your instructions to the letter but still ended up on WSOD. After about 15 seconds the USB connection times out and dies. Back to the drawing board
Michael
Click to expand...
Click to collapse
After unplug and replug of the usb cable, please check if there is a microsoft usb sync device in device manager
Have you ever tried a hard reset and then run a SSPL?

jockyw2001 said:
Yes sounds like progress
With this 1.16 do you see "unrecognized device" after unplug and replug usb cable? or do you see MS sync device in device manager?
Can you also try with 1.93 from this post please.
@MikeLim: did u try?
Click to expand...
Click to collapse
Let's see... when I unplugged the USB cable and re-plugged it, Vista detected a new device and started installing a USB Sync driver. I think it finished. Actually Windows Update decided there was a new HTC Sync driver available for me, but it didn't successfully install. I'll try the next step.
TTFN

HardSPL will not install - WHITE SCREEN

The issue is back, I recently bought a new device and I cannot HardSPL it. Many ppl are having this problem. Is it cause the device is new?? Can someone think of a way to fix it?
Related Links:
HardSPL will not install - WHITE SCREEN: SOLVED - http://forum.xda-developers.com/showthread.php?t=354061
HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free) - http://forum.xda-developers.com/showthread.php?t=334679

Someone?????????????

xmoo said:
The issue is back, I recently bought a new device and I cannot HardSPL it. Many ppl are having this problem. Is it cause the device is new?? Can someone think of a way to fix it?
Related Links:
HardSPL will not install - WHITE SCREEN: SOLVED - http://forum.xda-developers.com/showthread.php?t=354061
HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free) - http://forum.xda-developers.com/showthread.php?t=334679
Click to expand...
Click to collapse
Are you saying the info at:m http://forum.xda-developers.com/showthread.php?t=354061 does NOT fix the problem?
A friend of mine in Los Angeles had the same problem with his boss' new Tilt but was able to get it fixed with that information. I think I read somewhere that Tilts made withina certain time frame and with certain serial numbers are subject to this phenomenom. Sorry, can't point you to the exact forum.

JPIndustrie said:
MikeLim/JockyW,
I think I have the same exact issue. I'm on my 3rd North American ATT OEM Tilt, and I have the same exact symptoms that MikeLim talked about.
Tried your fix (with the SIM/MicroSD removed) and all i get is the WSOD, with ActiveSync timing out, and "windows Mobile-based device #7" in Device manager (with the same exact ID's).
Any ideas?
Thanks
Click to expand...
Click to collapse
Wonder_Man said:
I am having the same problem, when using JumpSPL it simply hangs at the white screen, it never continues to the tri-color screen. From what I read, only JumpSPL needs to be on the phone, then loaded through the phone menu. I get a white screen, and disconnected on activesync. Is it possible to continue install (disconnect usb,reconnect usb, installing HardSPL) without seeing the tri-color screen? Or am I babbling like my mother on a long distance call?
Click to expand...
Click to collapse
I posted that in the old thread yesterday, I recently got my Tilt about 3 weeks ago. I too cannot get past the WSOD. I didn't want to start flashing until I was sure that you could still do it with the WSOD on screen.

Same problem here and mine is about 2 weeks old.
Anyone with a brand new tilt(less than a few weeks old) have success getting past the white screen?

SPL v1.5 ???

Same for me white screen ... 09/08/07 RB01/EU

The new device I have bought is diffrent than the one I bought 2 days after it's release.
The new one is a bit thinner, The keyboard keys are slighter (No click sounds). Video is working better (NOT FULLY). So think that is the issue, new device new spl needed.

Ok so we need wait the new SPL

darko91 said:
Ok so we need wait the new SPL
Click to expand...
Click to collapse
Think so, or we doing something wrong (Don't think so, i've SPl'd like 5 devices the same way, but this one is special).

I once posted SSPL 1.93 for testing here (no security bypass yet, only to see if it runs and if you can connect by mtty). Someone should try it.

When i use your i have the Tricolor stuff ...
and
KAIS130
SPL-1.93.0000
CPLD-8
But not the USB on the bottom
But i'm @ work i cant test mort now ...

That's at least something. And you didn't have tri-color screen with any of the other SSPLs (pof, my 1.56, etc) ?

No with the 1.56 i had the White screen ... Nice white anyway

Try the attached SSPL. It is again a test version, only to see if it shows tri-color and if there is USB connectivity. Don't try to flash HardSPL with it.
1. copy it to your device and run it
2. tri-color screen should be shown and after a moment the word "USB" should appear
3. unplug and replug USB cable and see if you can connect with MTTY or if that is a problem check in device manager if there is a USB Microsoft Sync device at the end of the devicelist
EDIT: I just fixed a small bug. The attached version works fine on my Kaiser.

why cant try flash the spl ? is it dengerous ? ...

darko91 said:
why cant try flash the spl ? is it dengerous ? ...
Click to expand...
Click to collapse
DON'T FLASH IT
Only test if this SSPL (aka JumpSPL) shows tri-color and offers a working USB.
Once that is confirmed I can add the security bypass patches so you can flash a HardSPL.

Im finely back to home ...
I try your SSPL ... but allways same thing ... stuck on Trycolor no USB on the bottom ...

darko91 said:
Im finely back to home ...
I try your SSPL ... but allways same thing ... stuck on Trycolor no USB on the bottom ...
Click to expand...
Click to collapse
What version is your installed SPL ?
If you start it, make sure that the USB cable is connected!

That work USB is ok !
I made a mystake i have start the program without the USB plug ...
Windows say to me after the replug new device found ex..... .....

how to install hard spl without windows running in kaiser?

how to install hard spl without windows running in kaiser?
can i use some Mtty commands to make this possible?

this should probably be posted in the threads pertaining to HardSPL, and to answer your question i think not. you have to run the KaisSSPL/JumpSPL in order to temporarily overwrite the SPL on the device. and you cannot just overwrite it by flashing HardSPL as you would a rom or we would have done that from the get go and have it included on every rom.

my kaiser has some problems and can not load windows , thats why i need to change spl and try to use other soft to recover problem.
i have problem with processor communication via I2C with PM7500 chip.
may be i have to brick it firs deleting boot and going to serial connection with processor? (like command task 2a - but in my spl this command not working)
thank you

actualy there is no issue for you.
you can not change spl without WM6.
i've got the same probleme.
let me know if you find a solution.

i thought that my tytn ii was bricked. now is alive. Read "Radio Hell" threads... check in what status is your tytn ii... (obviously at your own risk)....
first try with "solved radio hell thread", but if you erased all by mistake this thread helped me too:
http://forum.xda-developers.com/showthread.php?t=394584&highlight=oemsbl
rumensat said:
how to install hard spl without windows running in kaiser?
can i use some Mtty commands to make this possible?
Click to expand...
Click to collapse

pressing green key not working in 1.93 spl
mtty commands for formating not working with this spl

mtty command don't work for me.

nicx said:
mtty command don't work for me.
Click to expand...
Click to collapse
MTTY should work, just make sure you have unchecked "allow usb connections" in activesync.

rumensat said:
may be i have to brick it firs deleting boot and going to serial connection with processor? (like command task 2a - but in my spl this command not working)
Click to expand...
Click to collapse
which spl version is installed? write down all information shown on tricolor bootloader screen

jockyw2001 said:
which spl version is installed? write down all information shown on tricolor bootloader screen
Click to expand...
Click to collapse
RUUNBH
KAIS130
SPL-3.28.0000
CPLD-8
Serial / USB

rumensat said:
pressing green key not working in 1.93 spl
mtty commands for formating not working with this spl
Click to expand...
Click to collapse
hi,
i had rom radio 1.64.06.04.
for me this command work fine:
Try this from MTTY:
set 16 0
task 8
maybe that's will work for you.

set 16 0 -this command doing nothing
task 8 - reboot unit
at all there is no chance to brick this **** at all
I LIKE TO BRICK THIS **** AND TO START WITH SERIAL DRIVERS
i take off battery in every second when load rom and no chans for me to destroy stupid boot

I remember loading the original HTC ROM when in deep sh*t trouble... no need to have it booted to OS, only to tricolor screen
then you will boot to OS, install SOFT-SPL, then HARD-SPL and your custom ROM, Radio, splash...

i can not boot to Os , i have never seen OS in this unit

rumensat said:
i can not boot to Os , i have never seen OS in this unit
Click to expand...
Click to collapse
when you turn on the device, what do you see? tricolor screen? or white screen? or
you cannot boot to OS even after flashing a stock official HTC rom?

when turn device it is start load windows, after first screen go melodi which i see in rom named LB (low battery), and phone sw off.
i can load any original rom with success, but same story.
i thing problem is in I2C communication between proc and PM7500 chip , register for batt value is nor readable.
thats why i like to remake soft and take off power controll from it, but can not flash hard spl

rumensat said:
when turn device it is start load windows, after first screen go melodi which i see in rom named LB (low battery), and phone sw off.
i can load any original rom with success, but same story.
i thing problem is in I2C communication between proc and PM7500 chip , register for batt value is nor readable.
thats why i like to remake soft and take off power controll from it, but can not flash hard spl
Click to expand...
Click to collapse
Isn't it easier to apply for a warranty replace then?

here in Bulgaria HTC dont have service

Anyway I have seen some note that jocky is going to make the SPL flashable via SD memory card... maybe worth waiting then

BTW have you tried different battery?

Rom flash went terribly bad - your advice is needed

Hello,
Today i bought the kaiser and wanted to rom flash it to 6.1
My plan is to flash it to L26KDTLB6 (http://forum.xda-developers.com/showthread.php?p=2574491&posted=1#post2574491) i've followed the instructions here : http://forum.xda-developers.com/showpost.php?p=2261226&postcount=2
and the flash was in progress but cancelled after 14% due to communication problems (????)... now when i resettred my kaiser i see this weird red green blue and white screen.
I am terribly worried i might have ruined my kaiser even before really using it.
I am begging you for help.. i would appreciate any kind of help from you guys.
Thank you so much
MIke.

Wow! Sounds like you are in deep doodoo. I had almost an identical problem last night trying to flash ROMeOS 4.7. I went and read the stickies at the top of this forum and was back up running in no time.

loserp3 said:
Hello,
Today i bought the kaiser and wanted to rom flash it to 6.1
My plan is to flash it to L26KDTLB6 (http://forum.xda-developers.com/showthread.php?p=2574491&posted=1#post2574491) i've followed the instructions here : http://forum.xda-developers.com/showpost.php?p=2261226&postcount=2
and the flash was in progress but cancelled after 14% due to communication problems (????)... now when i resettred my kaiser i see this weird red green blue and white screen.
I am terribly worried i might have ruined my kaiser even before really using it.
I am begging you for help.. i would appreciate any kind of help from you guys.
Thank you so much
MIke.
Click to expand...
Click to collapse
Sounds like you did not HardSPL. The tri color screen you are seeing is called bootloader. It's not as scary as it might seem at first. When you connect yoru device to your computer does it still show the letters "USB" at the bottom? If so, try flashing the stock rom for your device and see if that will fix your problem. After that be sure to make sure you've properly hardspl'd your device before flashing anything else.

loserp3 said:
... i see this weird red green blue and white screen...
MIke.
Click to expand...
Click to collapse
HOW COME YOU KNOW HOW TO WRITE BUT YOU CAN'T READ?
geez...

I had the same problem once. I remember I solved it that I first flashed it back to the OEM that came with it, and then flashed it again. It worked. Hard SPL and CID unlocker helped being that the phone was locked.
If you dont have OEM OS you can always find one here, just use the Search button.
Secondly, you have to follow the steps exactly as instructed because those are the only way to successful flashing. Are you sure that you didnt overlook one of the steps?
Pay special attentiton to the 2nd Q&A and also other Q&A being that there are all the answers.
Happy flashing mate.

Hello all,
I was able to revert back to hTC'S 6.1 rom...So everything was back to normal.
The thing is, i really want to make the kaiser look good with the d3d driver and the touchflo 3d, I'll give the http://forum.xda-developers.com/show...=1#post2574491 rom one more shot this time ill use
SSPL-KAIS.exe (is that ok ?? will that prep my device for rom flashing ??? )
is there another cooked rom that has the touch flo 3d and the d3d drivers ???
appreciate your help
MIke.

loserp3 said:
Hello all,
I was able to revert back to hTC'S 6.1 rom...So everything was back to normal.
The thing is, i really want to make the kaiser look good with the d3d driver and the touchflo 3d, I'll give the http://forum.xda-developers.com/show...=1#post2574491 rom one more shot this time ill use
SSPL-KAIS.exe (is that ok ?? will that prep my device for rom flashing ??? )
is there another cooked rom that has the touch flo 3d and the d3d drivers ???
appreciate your help
MIke.
Click to expand...
Click to collapse
Do NOT flash another rom until you have hard spl'd your device. Make sure you check out the thread at the top of this forum, which you already sited once. You should also consider sim/security unlocking your device as well. You can ONLY use jumpspl to put hardspl on your device. Absolutely do not start flashing roms until you can enter bootloader and next to spl: see "hard spl" somewhere in the title.

Hi
Ok, here's what i've done to prepare the device
1) i ran kaiser-HardSPL.exe and loaded the nbh that came with it
2) I copied SSPL-KAIS.exe to the kaiser and ran it
thats it... i didn't however see hard spl in the title.. i did see JUMPspl though

loserp3 said:
Hi
Ok, here's what i've done to prepare the device
1) i ran kaiser-HardSPL.exe and loaded the nbh that came with it
2) I copied SSPL-KAIS.exe to the kaiser and ran it
thats it... i didn't however see hard spl in the title.. i did see JUMPspl though
Click to expand...
Click to collapse
you are so making this too hard on yourself. Follow these directions to the letter and you'll be fine:
How to Install 3.2x.Hard SPL:
1. Plug the device into your PC
2. Copy Jump/Soft to your device. use JumpSPL If you have the "White Screen" issue, if you don't, you can use SSPL-KAIS.exe.
3. Take out your SD card & SIM Card.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe and flash the SPL
If you have problems with the above process, try this:
1a. download the attached files
1b. pull out the battery and reinsert it (this step *is* important)
1c. connect your PC to phone with a USB cable
2. REMOVE SIM and SD CARDS !!
3. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe
4. after a few seconds "USB" appears on the phone display
5. unplug and replug the usb cable
6. deselect "Allow USB connections" in Activesync connection settings
7. now flash hardSPL (run KaiserCustomRUU.exe from flash-hardSPL.zip on your PC)
Notes:
With the JumpSPL you should *not* flash radio roms, OS roms or full roms. The JumpSPL is only needed to flash a HardSPL (or SPL)
the link to the thread in which this came from is here:
http://forum.xda-developers.com/showthread.php?t=396922
Having just redone this this morning to revert back to 3.29, I can confirm that it works.
In the future, please don't start a thread for this type of porblem. We all starte out by reading. I've been a part of this forum for 3 years and learned all I have from just reading and asking questions that could not otherwise be answered.

loserp3 said:
Hi
Ok, here's what i've done to prepare the device
1) i ran kaiser-HardSPL.exe and loaded the nbh that came with it
2) I copied SSPL-KAIS.exe to the kaiser and ran it
thats it... i didn't however see hard spl in the title.. i did see JUMPspl though
Click to expand...
Click to collapse
you did not read the instructions correctly. Try reading them again.
It says:
How to Install 3.2x.Hard SPL:
1. Plug the device into your PC
2. Copy Jump/Soft to your device. use JumpSPL If you have the "White Screen" issue, if you don't, you can use SSPL-KAIS.exe.
3. Take out your SD card & SIM Card.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe and flash the SPL
You are stopping at step 5. Perform steps 6, 7, & 8. After that time you can soft reset the device while holding down the camera button (that will take you to the tri colored bootloader screen) and it will say "hardspl" if you have done it correctly.
If you don't read more closely you WILL break your phone and nobody here will be able to help you. These procedures are easy enough to follow if you take your time and read. I only say this to save you a great deal of frustration when your phone dies later.
Also, remember in the future that all the information you are seeking is readily available if you look for it. Dont' expect someone to GIVE you the answer, and please please please....post your questions in a thread that is already around rather than starting a new one!

@ Scothua
like the way you think . . .

scotchua,
Thank you for your assistance. i've finally upgraded my rom.
thank you all.