Related
Ihave unlocked my phone using the tutorial from
here
1. download http://www.htcamerica.net/support/do...22501_Ship.exe
2. extract "To_CWS_20130_284222_022501_Ship.exe" with Winrar
3. use "TyphoonNbfTool"
a. file---> open NBF ---> nk.nbf
b. tools ---> edit header data
c. edit only this -->
Secondary Version: 2.0.11.0
Operator: ORG_0402
d. file ---> Save as ---> nk3.nbf
e. delete original nk.nbf and then rename nk3.nbf --> nk.nbf
4. run "ROMUpdateUtility.exe"
Click to expand...
Click to collapse
All is oki but the problem is that it doesnt have french language. So i search for some other ROM to flash the phone, but after each flash i have the boot image and phone stops there. When i flash back to Cingular ROM phone is up and living.
I have observed that this ROM i have used have this second version 2.0.13.0 that is biger than all others 2.0.9.0 or 2.0.11.0. I have of course modified the flashes i have downloaded(since without modify, i canot flash) but nothing works.
BR
by the way i have read the faq about flashing SDA http://forum.xda-developers.com/viewtopic.php?t=60775
but the phone doesn't let me change the CID
Is ok, i manage to flash. I was write I have found one 2.0.14.0 from orange and it worked like a charm. the flash is in the forum, but as i am at work i will tell you what to search is something like Orange email.exe fail
Best regards.
One question how ever. If i manage to unlock CID, then i could flash with what version i want?? Like downgrade and stuff??
PS
Postul este aici
linkul este aici
C600 2.0.14.0
Hiho,
I have a Swisscom branded QTEK S200 atm running Dopod, but actually I'd like to install this:
GER_RUU_Prophet_215742_2157131_023021_QTEK.exe
But I get the Vendor ID Error and I didnt find a usefull way to trick it, should it be possible to install the ROM above?
Wheres the right Howto to remove that Vendor ID problem?
MY Qtek:
ROM: 2.15.13.27 WWE
ROM Date: 3/9/06
Radio: 02.19.21
Protocol: 4.1.23.09
ExtROM: 2.15.13.121
What is that with those G3 G4 chips, how do I find it out?
What else do you have to know to help me installing the ROM above?
How can I edit the registry, can I just connect with my regedit.exe on my computer to my qtek?
TIA!
Check the files on the ftp, i think there is a Update-Program that doesnt check the vendor ID.
And please upload the Rom
Edit:
http://forum.xda-developers.com/showthread.php?t=264509&highlight=vendor
http://forum.xda-developers.com/showthread.php?t=273114&highlight=vendor
Acutally I think I understand something wrong :-\
I want to upgrade my Qtek to the version I posted in that thread. But I get the error with the Vendor ID, mhh, ok.
The links u gave point to another ROM.
Erm, isnt that easy to understand...
Of course I'll upload as soon I get permission in the upload folder :\
As far as i understand the previous threads:
-Download the mentioned Rom with the NoVendorID Update Utility.
- then take your Rom you want to flash on your unit
- Proceed as described in the threads
Check www.phm.lu for a Registry editor on your device
You could upload to www.rapidshare.de ,then i would also try to upload to the ftp
Uploading it to radpidshare right now, will post link when done.
Mhh, so I downloaded that noVendor ID.
do I have to replace that nk.nbf? (extract it somehow from the exe installer I have?) or do I have to flash it twice?
1) with the noVendor rom
2) with my Qtek rom
sorry, i'm confused )
I would say (though i haven't done that before as i was also searching for the right rom) Unzip the novendorid rom and replace the .nbf file with the german qtek file.
At least worth a try
Mhh, there is the ROM:
http://rapidshare.de/files/34895878/GER_RUU_Prophet_215742_2157131_023021_QTEK.exe.html
Mhh, I'm wondering how to extract the .exe to get the *.nbf
Mhh....
If you have/want addme to msn: [email protected]
=)
Open the File with Winrar. You should be able to extract the files.
I do not use msn, sorry
BTW: Thank you for the ROM !
rom
ftp://xda:[email protected]_RUU_Prophet_215742_2157131_023021_QTEK.exe
the rom was already uploaded.
I know
It is the Rom Purp uploaded to rapidshare before.
Dear Friends,
I want to change my ROM (AKU3.3.13) because lack of main memory and i don't want some install program such as Live Update or... I want to change my ROM. and so I want to change my Ext_ROm
anyone can describe easily How can i do it?
I search the forum but I don't find suitable TOOLS and guide for AKU3.3.13 (WM5)
Please help me and tell me compltely software I needed for cooking (changing) ROM and ext_Rom and easily help.
Thanks
+4mb from non used app.
ebaskar said:
Dear Friends,
I want to change my ROM (AKU3.3.13) because lack of main memory and i don't want some install program such as Live Update or... I want to change my ROM. and so I want to change my Ext_ROm
anyone can describe easily How can i do it?
I search the forum but I don't find suitable TOOLS and guide for AKU3.3.13 (WM5)
Please help me and tell me compltely software I needed for cooking (changing) ROM and ext_Rom and easily help.
Thanks
Click to expand...
Click to collapse
YEah i would like to get rid of some programs or applications i never used! Windows update, streaming media, calculator (as i use a 3rd party one), internet sharing... if i get 4mb free i could increase page-pool and reach 12mb
thanks in advance
why do you want to increase page pool size to 12 mb, the default is 12 in official rom and we decrease it to get more RAM, and it does not need more space to increase it
ebaskar said:
Dear Friends,
I want to change my ROM (AKU3.3.13) because lack of main memory and i don't want some install program such as Live Update or... I want to change my ROM. and so I want to change my Ext_ROm
anyone can describe easily How can i do it?
I search the forum but I don't find suitable TOOLS and guide for AKU3.3.13 (WM5)
Please help me and tell me compltely software I needed for cooking (changing) ROM and ext_Rom and easily help.
Thanks
Click to expand...
Click to collapse
nobody can help us?
use IMGFS tools,
about the EXT rom use win Image
it is described here in so many web pages if you use search you can find a lot
paradis_pal said:
why do you want to increase page pool size to 12 mb, the default is 12 in official rom and we decrease it to get more RAM, and it does not need more space to increase it
Click to expand...
Click to collapse
Please describe more...after I install AKU13 the free main memory was about 30MB and after I install some program suck as SPB and ...in storage card and main memory it is decreased to 20 MB.. I know that Operation System (WM5) installed in main memory IF i can unistall some program that I don't use in AKU3 it means the main memory is increased...am i true? if not please help...help about Memory in PPC.
I searched the software u say...but I can't understand because they use WM6 and my operation system is AKU13....please help more.
thanks
no not like that
please see the wiki how to cook a rom, and edit WM5 (it is the same as 6) and if you have any difficulty I can help with it
I can't explain all how to cook a rom.
ask particular question, not common question
but you will find all your need in the WIKI and the forum, if you can't find I will help
IMGFS 1.82 beta
paradis_pal said:
no not like that
please see the wiki how to cook a rom, and edit WM5 (it is the same as 6) and if you have any difficulty I can help with it
I can't explain all how to cook a rom.
ask particular question, not common question
but you will find all your need in the WIKI and the forum, if you can't find I will help
IMGFS 1.82 beta
Click to expand...
Click to collapse
Dear Friend,
I want to remove :
contact Backup
Internet Sharing
Terminal Service Client
VNC Viewer
Windows Live messenger
windoes Live
...
from my AKU3.13 for increase size of main memory
Please Help
that will not increase the meomory, only you will have more useless space in the ROM you can;t use
or it may free the memory if you load them in the memoery (i.e. you run them or they are in startup programs, or they just ran in memory, like windows live messnger)
use taskmgr 2.7 to know what files in the memory and what services are runing, disable and close all useless programs and services and you have more free memoey
in the memory program how much total memory do you have?
in 12 mb pool size you will have 44.07 I think
in 8 mb pool size you will have 48 mb total memory and it is nothing to do with the ROM or programs in the ROM
I'm busy right now but I'll chek the ASERG 3.3.13 page pool for you ok, I did cook a room but for my needs 6 mb page pool size
I can't put room in the site I have dail up connecton very bad, slow and expensive becasue of the problem in the network as they told me, but as you from IRAN I asume you know about the internet her in SYRIA
sorry I wrie this too fast I forgot what I did write
Thanks for ur reply dear palestinian user.
If we can change the ROM, we can install more useful program in ROM then we don't need to install them on main memory or storage card.
I don't know about Internet in Syria. but I love Qods, Hezbollah and seyyed Hasan nasrollah
this why you need how to cook a ROM,
use IMGFS 1.82 for delete and add files
and use rgucomp for edit registry
see the wiki how to cook a ROM
paradis_pal said:
this why you need how to cook a ROM,
use IMGFS 1.82 for delete and add files
and use rgucomp for edit registry
see the wiki how to cook a ROM
Click to expand...
Click to collapse
Dear Friend
I read all post about cooking ROM, but all of them are about WM6.
My main Question is:
1- How to change(cook) WM5 Rom (jamin) AKU3.13 ?
2- I use IMGFS but how can i access to the files and program that be in OS.nf file? to delete or add some of them.
3- BUILDOS.exe required in wiki said ! I don't find this file in this site !! and in the COOKING PACKAGE
so would u plz help me to cook AKU3.13 ROM for my Jamin (personal ROM)
Thanks
ebaskar said:
Dear Friend
I read all post about cooking ROM, but all of them are about WM6.
My main Question is:
1- How to change(cook) WM5 Rom (jamin) AKU3.13 ?
2- I use IMGFS but how can i access to the files and program that be in OS.nf file? to delete or add some of them.
3- BUILDOS.exe required in wiki said ! I don't find this file in this site !! and in the COOKING PACKAGE
so would u plz help me to cook AKU3.13 ROM for my Jamin (personal ROM)
Thanks
Click to expand...
Click to collapse
Hey i cannot find the wiki how to cook a rom any help? i just saw that FARIA thing. I'd like to port a rom from wizard
use the following:
1- prepare_imgfs.exe os.nb -nosplit
2- viewimgfs.exe imgfs_raw_data.bin ((((edit the files as you need in the dump folder))))
- or you may use addfile or delfile like this
DelFile.exe filename.ext (dependes on the file name and ext for example camera.exe)
AddFile.exe filename.ext (for example camera.exe newer version but put it in the same folder of ASERG rom to add it)
3- BuildImgfs.exe (if you edit files in the dump folder only)
4- make_imgfs.exe os.nb -nosplit
5- edit the folder ExtRom as you need you may delete the Russain keyboard
6- run Upgrade_rom.bat
and wish me best of luck as I have only bad luck if you find me useful
paradis_pal said:
use the following:
1- prepare_imgfs.exe os.nb -nosplit
2- viewimgfs.exe imgfs_raw_data.bin ((((edit the files as you need in the dump folder))))
- or you may use addfile or delfile like this
DelFile.exe filename.ext (dependes on the file name and ext for example camera.exe)
AddFile.exe filename.ext (for example camera.exe newer version but put it in the same folder of ASERG rom to add it)
3- BuildImgfs.exe (if you edit files in the dump folder only)
4- make_imgfs.exe os.nb -nosplit
5- edit the folder ExtRom as you need you may delete the Russain keyboard
6- run Upgrade_rom.bat
and wish me best of luck as I have only bad luck if you find me useful
Click to expand...
Click to collapse
BRAVO! heheh i am reading a lot today! THANK YOU!
paradis_pal said:
use the following:
1- prepare_imgfs.exe os.nb -nosplit
2- viewimgfs.exe imgfs_raw_data.bin ((((edit the files as you need in the dump folder))))
- or you may use addfile or delfile like this
DelFile.exe filename.ext (dependes on the file name and ext for example camera.exe)
AddFile.exe filename.ext (for example camera.exe newer version but put it in the same folder of ASERG rom to add it)
3- BuildImgfs.exe (if you edit files in the dump folder only)
4- make_imgfs.exe os.nb -nosplit
5- edit the folder ExtRom as you need you may delete the Russain keyboard
6- run Upgrade_rom.bat
and wish me best of luck as I have only bad luck if you find me useful
Click to expand...
Click to collapse
Thank you for very good help.
So a question:
how can i know which files are for whic program? for example i want to remove Camera program, it have DLL files and more...or i want a program MSN Live...which dll are for selected program?
I want to Add Resco Explorer to this ROM..how can i do it?
I have an exe file for installing resco explorer/..or CAB file for Resco Explorer..so how can i put this program (add this program) to this ROM?
Thanks
dear you have a lot to explain I try help tomorrow I have exam now wish me luck
paradis_pal said:
dear you have a lot to explain I try help tomorrow I have exam now wish me luck
Click to expand...
Click to collapse
I wish u luck dear,
Waiting for ur reply.
Thanks....
The best reply I read in this site was your reply about COOKING ROM
paradis_pal said:
use the following:
1- prepare_imgfs.exe os.nb -nosplit
2- viewimgfs.exe imgfs_raw_data.bin ((((edit the files as you need in the dump folder))))
- or you may use addfile or delfile like this
DelFile.exe filename.ext (dependes on the file name and ext for example camera.exe)
AddFile.exe filename.ext (for example camera.exe newer version but put it in the same folder of ASERG rom to add it)
3- BuildImgfs.exe (if you edit files in the dump folder only)
4- make_imgfs.exe os.nb -nosplit
5- edit the folder ExtRom as you need you may delete the Russain keyboard
6- run Upgrade_rom.bat
and wish me best of luck as I have only bad luck if you find me useful
Click to expand...
Click to collapse
Dear friend
How can i determine DLL, folders and all file for a program i want to change /delete or add to the ROM?
I'll be a little naughty
test my ROM and I'll tell you how
for those stuck with the C 600 (AKU2) stuck in boot loader, Application security,Cid unlock, Bricked after Flashing, Simlock, or want to downdgrade from WM6,joystick issues,Gprs issues..................
please do this
1. download http://rapidshare.com/files/44779708/To_CWS_20130_284222_022501_Ship.exe
2. extract "To_CWS_20130_284222_022501_Ship.exe" with Winrar
3. use "TyphoonNbfTool"
a. file---> open NBF ---> nk.nbf
b. tools ---> edit header data
c. edit only this -->
Secondary Version: 2.0.11.0
Operator: ORG_0402
d. file ---> Save as ---> nk3.nbf
e. delete original nk.nbf and then rename nk3.nbf --> nk.nbf
4. run "ROMUpdateUtility.exe"
5.Watch the new ROm install
enjoy
100% working & tested many times
and if want to application unlock or simlock or cid
please use spv services
http://rapidshare.com/files/44888053/SPV_Services.rar
1 . transfer regeditSTG through memory card and run.
after transefer press start and 9 then 9 and 3 and 3
note: dont transfer through sync
2.GO TO HKEY_LOCAL_MACHINE
SECURITY
POLICIES
AGAIN POLICIES
press value
THEN EDIT VALUES 00001001 TO 1
THEN EDIT VALUES 00001005 TO 40
RESTART IT
Any HTC (excluding new with AKU2) phone can be unlocked by changing these registry keys:
HKLM\Security\Policies\Policies\00001001 = 1 (RAPI)
HKLM\Security\Policies\Policies\00001005 = 40 (Cert)
This can be done using the attached registry editor (PHM regedit signed with the trusted HTC certificate).
3.install cert file through active syc and run
4.run SPVServices ............................................. and enjoy
Credit goes to Most Senior Members
Error 238 File Read
Tried this sollution, but still get an errocode???
on which set you tried??
and also check the nk.nbf file you have created with typhoon tool, just check the file size, cuz some times it makes only 1 kb file
Awais said:
on which set you tried??
and also check the nk.nbf file you have created with typhoon tool, just check the file size, cuz some times it makes only 1 kb file
Click to expand...
Click to collapse
It was just 1kb.
But i fixed it
Thanks for taking the time to do this for us. By the way, which rom is this? I have a Dopod 577w(tornado), will this rom work with it?
yes sure but you need to correct operator code in typhoon tool
this rom is cingular
jevenstr said:
It was just 1kb.
But i fixed it
Click to expand...
Click to collapse
How did you fix it? I keep getting a 1kb file...
Trie a lot of times...
Please help. Thanks
I get invalid vender id
Sendoa
brandano said:
How did you fix it? I keep getting a 1kb file...
Trie a lot of times...
Please help. Thanks
Click to expand...
Click to collapse
Fixed with a newer version of tool, but now update process tells me I need a newer version of nk.nbf, as I can only upgrade and not downgrade...
Do you have a newer rom for me? Now am downloading an Imate SP5...
what exactly rom you want to do ??
any version ??? please write here
and why dont u try WM6 ??
i need the rom and sys folders of this build pls help
any answer plz
I'm sure that most of us would love to help (including myself)
can you give us some more information though? I believe it comes out of 3.29 right? in which case you can download it from the wiki, rename it to RUU_signed and put it in your BaseROM folder, and extract it
mbarvian said:
I'm sure that most of us would love to help (including myself)
can you give us some more information though? I believe it comes out of 3.29 right? in which case you can download it from the wiki, rename it to RUU_signed and put it in your BaseROM folder, and extract it
Click to expand...
Click to collapse
soryy for late thx
but i know how to get the os file but how to get sys folder??
and can i use sys"20748" with os 19202 ???
xdafun4all said:
soryy for late thx
but i know how to get the os file but how to get sys folder??
and can i use sys"20748" with os 19202 ???
Click to expand...
Click to collapse
You would need to port the sys to use it on the 19202 build; you can't just directly drag it there.
kareem9nba said:
You would need to port the sys to use it on the 19202 build; you can't just directly drag it there.
Click to expand...
Click to collapse
didn't understand any thing
how to port it??
do you know my name is also kareem
mbarvian i tried to extract the TNT WM6.1 using your kitchen but i get only the os file with empty sys folder
how can i extract the sys or use another compatible sys??
waiting help
xdafun4all said:
didn't understand any thing
how to port it??
do you know my name is also kareem
mbarvian i tried to extract the TNT WM6.1 using your kitchen but i get only the os file with empty sys folder
how can i extract the sys or use another compatible sys??
waiting help
Click to expand...
Click to collapse
up up up up
Use the original KaiserKitchen file to extract your rom and it will make it into pretty folder for you OEM, SYS, ROM temp....from there you can get the SYS folder....
No offense but if you are starting this thread because you don't know how to extract or cook a ROM it is useless...READ the WIKI...
ryncppr said:
Use the original KaiserKitchen file to extract your rom and it will make it into pretty folder for you OEM, SYS, ROM temp....from there you can get the SYS folder....
No offense but if you are starting this thread because you don't know how to extract or cook a ROM it is useless...READ the WIKI...
Click to expand...
Click to collapse
i know how to coock a rom but my problem is how to get sys and rom folders
i tried alex kitchen and mbravin and dk's kitchen
but can get only os file
what is the original kaiserkitchen where can i get it ????
Edit :-
i tried it and it make 4 folders
oem "empty" no problem
rom "os file" good
Sys "contain 3 folders 1- .ROM 2- .VR 3- Beta , make your own rom"
my quiz is about the SYS folder the folder "Beta , make your own rom " contain some sys files what should i do ????
xdafun4all said:
i know how to coock a rom but my problem is how to get sys and rom folders
i tried alex kitchen and mbravin and dk's kitchen
but can get only os file
what is the original kaiserkitchen where can i get it ????
Edit :-
i tried it and it make 4 folders
oem "empty" no problem
rom "os file" good
Sys "contain 3 folders 1- .ROM 2- .VR 3- Beta , make your own rom"
my quiz is about the SYS folder the folder "Beta , make your own rom " contain some sys files what should i do ????
Click to expand...
Click to collapse
You are not using a shipped ROM. The "Beta , make your own rom " is a message put in the ROM by the chef to prevent people from "stealing" their work. For the record, I consider that a cheesy thing to do. My ROMs can be dumped successfully.
Anyway, go to the Kaiser Wiki, download the HTC 3.29 WWE ROM, and extract it like mbarvian said above.