Database Info

I need a German ROm for the S710

I need a German ROM for the S710, cooked or not.
Thank you

What roms do you have?

I have a Orange branded ROM and I would like to have a ROM without providersettings.

Well yoo could download the kitchen from Dr Martin Gonzo and get the sy and oem folder I uploaded and integrate them the way I wrote. Then flash it and install MoDaCo_Vox_eT9_Language_Pack.cab!
Kitchen: http://ostiedbrosse.free.fr/Xda-Dev/Vox kitchen v0.1c.rar
Sys:http://rapidshare.com/files/81390036/SYS.exe.html
Oem: http://rapidshare.com/files/81256247/OEM.exe.html
Integration:
Well I got that to work. German is in the language list now. The kitchen is working fine anyways. The only problem is the caps thing. What I did is:
1. I put all the folders with 407 in them from my sys folder to the kitchen's sys folder.
2. I copied the OEM_lang_0407 folder for German to the oem folder of the kitchen.
3. I looked for other mui files in the kitchen and copied the corresponding files from my dump to these folders.
4. I deleted all the files in Language_German except the .dsm and .rgu (make a folder in OEM and name it Language_German, the files for this folder are attached)
5. I ran G'Reloc and build a ROM and flashed that!
Here is the thread to the kitchen: http://forum.xda-developers.com/showthread.php?t=351431
EDIT: Maybe I will upload the whole kitchen with German or my ROM, but you will have to wait for that! The uploads would be in the kitchen thread or a new thread for the ROM!

Thank you frauhottelmann
I wait you ROM, I'm a newbie with ROM's and I'm not so sure with programing.

Well you don't have to know anything about programming. Dr. Martin Gonzo will upload the new kitchen with German support and when the wiki is done you do everything by yourself, because it might take a while for me to make a completely stable ROM and upload it! http://wiki.xda-developers.com/index.php?pagename=vox_cooking

You can try this:
http://www.swisscom-mobile.ch/scm/d...dm=Detail&pa=0x0x0x0x0x0x0x166x0&odg=Software

[POLL][REF]*SYS Porting Guide*[ONLINE]

SYS PORTING GUIDE
Special thanks goes to Monsterfly for helpful guidance on porting SYS to a new build
Inventory:
Tools you will need for porting the SYS
BuildOS+Package Tool by Ervius
G’Reloc Tool by Misar
Procedure:
Use BuildOS+Package tool to dump ORIGINAL ROM and build packages
Copy G'Reloc to the folder where you have original SYS folder
Run it and write down numbers under slot 0, slot 1 and size of rom
Use BuildOS+Package tool again to dump DONOR ROM and build packages
Replace your original SYS folder with Donor's SYS
Run G'Reloc again
Notice that this time numbers under slot 0, slot 1 and size of rom may be different
Just replace them with numbers you got in the firt step
Click »Doit!« and wait till it shows "Done" in the status bar
Use the OEM folder in which you have added ingredients and the XIP fodler that you ported
Info: In some cases you will need to copy WinCENLS_WWE folder to SYS folder (if not present in Donor's SYS) from your original ElfIn SYS otherwise your device will not boot
Build OS in the kitchen of your choice and flash the new build ROM to your device and HAPPY COOKING
Timebomb solution and the boxed closed / ok button solution found here by HTCTouchp

[POLL][REF]*XIP & SYS Porting Guide*[ONLINE]
XIP Porting Guide (Based on Bepe's Buildxip.exe tool)
More detailed Porting guide on manual XIP Porting can be found here
I have added pictorials in .pdf format at the end of this post. Too many pictures so the .pdf file
Special thanks goes to Ervius for a lot of helpful guidance on porting XIP to a new build
Inventory:
Tools you will need for porting the XIP
BuildOS+Package Tool by Ervius
XIPPort Tool by Bepe
M’Reloc Tool by Misar
Procedure:
To make life more simple, I am attaching the XIP.bin extracted from Kaiser 19209 build ROM by Ervius. Dump the XIP.bin file with XIPPort tool and choose to make packages. Download from here (Rapidshare Folder)
In the OUT folder, ignore or delete all the text files (.txt) These files are created by XIPPort tool only to know the physical addresses and are not required for porting
In files and modules folders, delete all folders except “MSXIPKernel” and “MSXIPKernelTLK” The modules and files from these folders are the only items which are to be ported to make a new build. DO NOT copy or replace any files and modules from OEMXIPKernel, as these are device specific
Now open the BuildOS+Package tool and on packaging page click open with option to choose dump folder. Select your original ElfIn XIP folder (OS 19199) and on right you will see the XIP in its directory structure. Don’t click on build packages (you can’t do it anyways, as package.sof file is not present in the XIP folder) Instead click on “OEMXIPKernel” and then right click to select export package. Choose to save on different location, like your desktop. This is only temporary requirement, just to be on safe side that you still don’t replace any files or modules seen in that folder
Now you copy and replace the files and modules seen in the “MSXIPKernel” and “MSXIPKernelTLK” from the new XIP in your original XIP folder, you need to copy and replace only those items found in your original folders, do not add anything new. Now compare each and every .rgu file from your new XIP with your original XIP and check if they are similar (NOT the .rgu files in “OEMXIPKernel”)
After all the files and modules are replaced and .rgu files checked, run the M’Reloc tool and check the modules addresses from your original XIP with your new XIP (Don’t do anything to the modules located in “OEMXIPKernel”) The addresses have to be similar to your original modules from your original “MSXIPKernel” and “MSXIPKernelTLK” folders
Changing of addresses through M’Reloc is not required if you are using the BuildOS+Package tool for cooking ROMs as Ervius has already included the address relocation system into his tool with BuildXIP
In a nutshell you need to follow the following copying & replacement structure and everything will work:
Original XIP (19199): OEMXIPKernel
Donor XIP (19209): MSXIPKernel and MSXIPKernelTLK
Replace this new XIP folder in ROM in Bepe's WM6.1 Elfin kitchen and cook to get 19209 Build XIP, HAPPY COOKING

I have managed to put together a clean Base WM6.1 ROM for Elfin (Touch XL - 128/256) with almost everything removed except the most essential system packages
Please take note, this is a base rom for cooking and not to be directly flashed on the device as it may be unusable. You need to populate the ROM with your choice of packages and the essentials to bring it up to the 50MB limit for making it usable
Link to download the dumped Removed packages: Here
Special thanks to
Bepe for his wonderful kitchen
Noonski for his valuable comments and suggestion all the way
Kokotas for his help in getting rid of the cube
Download Bepe's WM6.1 Kitchen for ElfIn and replace the OEM and SYS folders with yours and cook the OS.nb file
The archived OEM package (dumped and packaged) can be downloaded here
DOWNLOAD HERE (V1)
UPDATE
DOWNLOAD HERE (V2) (Further stripped down OEMApps & OEM_Lang_0409)
20296 MSXIPKERNEL. Mix this with OEMXIPKERNEL and you are ready to cook. Do M'relocing if necessary
Download here: View attachment 108115

SYS archieve
A. The archived SYS package 19199 buid. DOWNLOAD HERE
Stripped to down basic required
B. SYS ported from 19209 Build. DOWNLOAD HERE (Rapidshare Folder) This archieve is from my new ROM (XIP and SYS Ported to new build) Removed packages as per above ist
C. 19588 Build ROM Dump (OEM, SYS & XIP) DOWNLOAD HERE. Thanks to Koko for sharing this archieve (SYS, OEM & XIP)

Hi Abrabekar,
You really came in the right time! I'm about to remove all the unnecessary apps inside Elfin original ROM and now you came with WM6.1
You really save my time, many thanks to you!
Cheers,
Vibranze

Deleted! Double post.

well im just waiting for another version wm6.1 ROM for elfin~at least after swiftblade and couldyfa's~ any updated wm6.1 ROM for elfin is welcome! `cheers~

JohnQ said:
well im just waiting for another version wm6.1 ROM for elfin~at least after swiftblade and couldyfa's~ any updated wm6.1 ROM for elfin is welcome! `cheers~
Click to expand...
Click to collapse
@JohnQ.. this is not an upgrade to swiftblade's or cloudyfa's wonderful roms but just a clean base rom for everyone to cook have more personalised options

Hi Ababrekar,
Yeah, but how I supposed to populate the SYS and OEM folder? Or to be precised, how should I continue from your OS.nb file?
Cheers,
Vibranze
ababrekar said:
@JohnQ.. this is not an upgrade to swiftblade's or cloudyfa's wonderful roms but just a clean base rom for everyone to cook have more personalised options
Click to expand...
Click to collapse

vibranze said:
Hi Ababrekar,
Yeah, but how I supposed to populate the SYS and OEM folder? Or to be precised, how should I continue from your OS.nb file?
Cheers,
Vibranze
Click to expand...
Click to collapse
you need to populate the rom by adding your choice of packages. the essentials out the removed list would be phone dialer, commanager, bluetooth, netcf, audio manager. also you need to add files so the final cooked os.nb file is above 50mb limit

Don't Mind Vibranze he allready is running his own Rom...

Noonski said:
Don't Mind Vibranze he allready is running his own Rom...
Click to expand...
Click to collapse
i was answering his questions coz no question should go unanswered in my thread

I think it would be a good idea to post which kitchen you advice to cook the nb in.

I was wondering if there is a WM 6.1 Rom with nothing extra added. Just like an original HTC ROM? Like with no accessories folder, or HTC Action screen etc. I really don't like any of that stuff. I really only wanted WM 6.1 for the threaded sms.
Thanks in advance

canadian student said:
I was wondering if there is a WM 6.1 Rom with nothing extra added. Just like an original HTC ROM? Like with no accessories folder, or HTC Action screen etc. I really don't like any of that stuff. I really only wanted WM 6.1 for the threaded sms.
Thanks in advance
Click to expand...
Click to collapse
as i said, this is a bare naked base rom with all the packages removed for maximum user customisation. the packages removed are listed in my first post here
Noonski said:
I think it would be a good idea to post which kitchen you advice to cook the nb in.
Click to expand...
Click to collapse
good suggestion, like always brother i have updated the first post at the last line guiding to bepe's kitchen for cooking the nb file
(although i need bepe's or your guidance on how to get the exact same contents of his ROM folder from my ROM which can help everyone in achieving more customisation)

Well i've been working a month on SuperCore now but it now contains Packages for almost everything you have removed.
Looked up most of the registry settings for removed items to.
Generated new .dsm files and made option.xml for each.
And i still need to make registry keys to make removed controlpanel items work from SD.
So now i can wait another month before uploading new SuperProCore.
Now if somone could tell me how to make a os.nb.payload for ELF only with 4MB pp poeple would really be happy.

Noonski said:
Well i've been working a month on SuperCore now but it now contains Packages for almost everything you have removed.
Looked up most of the registry settings for removed items to.
Generated new .dsm files and made option.xml for each.
And i still need to make registry keys to make removed controlpanel items work from SD.
So now i can wait another month before uploading new SuperProCore.
Now if somone could tell me how to make a os.nb.payload for ELF only with 4MB pp poeple would really be happy.
Click to expand...
Click to collapse
even i'm looking for a way to get the exact contents of ROM folder what Bepe has in his kitchen for ElfIn. It contains XIP with a lot of other files. I wonder if having the os.nb.payload from my own rom would help rather than using bepe's file still waiting for a guidance
i am attaching the default.hv & user.hv files with the reg entries deleted as per the removed packages list. see if you can check and comment on it, it will be great
eagerly waiting for SuProCore

Most of the keys are double ussually.
So you'll find the same keys also in SYS and OEm .rgu files as in hives files.

Noonski said:
Most of the keys are double ussually.
So you'll find the same keys also in SYS and OEm .rgu files as in hives files.
Click to expand...
Click to collapse
oh ok. so to completely remove the removed package list from the rom, i will have to also edit the .rgu files found in oem & sys?

ababrekar said:
oh ok. so to completely remove the removed package list from the rom, i will have to also edit the .rgu files found in oem & sys?
Click to expand...
Click to collapse
Naah you really don't need to.
Those left behind registry settings ussually don't do any harm without the files present.

[Release] EasyPortOven V2 [Updated May 07, 2008] Now with XIP porting!!

This is a release for my ROM porting kitchen. It ports both XIP's and SYS folders [currently for the herald/atlas/wing only].
http://www.darthnet40.com/xda/ivanmmj/Kitchens/
Place bepe's kitchen in the Working_Folder (so that OEM/SYS/ROM and other folders are right within Working_Folder.) Alternatively, you can place also place all the files into EasyBakeOven's folder. Allow the Working_Folder to override EasyBakeOven's Working_Folder. You will not loose any data.
Place the SYS file you wish to port into Working_Folder (and delete your old SYS folder.) Place your xip.bin that you wish to port into the Prepare folder.
Obligatory Warning Label:
Use this at your own RISK. I cannot be held liable for any damage caused to your device by your own mistakes or by my mistakes in the instructions.
If you wish to know how to do this manually, head over to my HowTo thread.

thanks ivan

Could you please post a basic tutorial how to use this? I'm a bit confused. TY

Well, for now, since it's not a final release, just put the SYS folder from a ROM you want to port over into the Working_Folder and then run the batch file. Then take your favorite ROM (like JustClean) and delete the SYS folder that it came with. Then add the SYS you just ported over. Then just use my kitchen the way you would normally use it.
I'll try to write something more useful, or maybe automated the whole process more later, but for now, I don't have the time to. I hope my "tutorial" is useful, though!

Sry for being a bit stupid, but what is this supposed to port into what? It updates ROMs from ypur old EasyBakeOven?

CommZ said:
Sry for being a bit stupid, but what is this supposed to port into what? It updates ROMs from ypur old EasyBakeOven?
Click to expand...
Click to collapse
it is for porting for example a Kaiser SYS to a hreald SYS for cooking!!
to get a newer build.... the kaiser ones are allways earlier than all other devices...

Aah, so it is not much useful for me as I am barely able to use ivan's easy kitchen. Thanks

not working for me.... get an error... I/O error
g´reloc stop working
sorry...

papamopps said:
not working for me.... get an error... I/O error
g´reloc stop working
sorry...
Click to expand...
Click to collapse
That's strange.... Make sure that your SYS folder does not have a XIP folder in it or anything similar. If that doesn't work, try to run it WITHOUT the OEM.

ivanmmj said:
That's strange.... Make sure that your SYS folder does not have a XIP folder in it or anything similar. If that doesn't work, try to run it WITHOUT the OEM.
Click to expand...
Click to collapse
i run both with and without oem... and sys only has sys files. no xip!

papamopps said:
i run both with and without oem... and sys only has sys files. no xip!
Click to expand...
Click to collapse
One of the SYS folders that I found had a XIP something folder. (It wasn't called XIP, but it had files that the XIP had and it had XIP in its name.) This caused it to crash.

ivanmmj said:
One of the SYS folders that I found had a XIP something folder. (It wasn't called XIP, but it had files that the XIP had and it had XIP in its name.) This caused it to crash.
Click to expand...
Click to collapse
sorry. but my sys is completely similar to the one i use for herald. BUT i have to change some files to get it working fro herald.
i did manually with the wince_
and the shellres.dll and the other
the ones you have in your portkitchen. then treid to cook... all good BUT stuck at blackscreen after 2nd bootscreen!

papamopps said:
sorry. but my sys is completely similar to the one i use for herald. BUT i have to change some files to get it working fro herald.
i did manually with the wince_
and the shellres.dll and the other
the ones you have in your portkitchen. then treid to cook... all good BUT stuck at blackscreen after 2nd bootscreen!
Click to expand...
Click to collapse
so i should replace the shellres.dll and WinCENLS?

hmm... I thought I did that on the kitchen. It's very possible that I didn't upload the proper files, though...

Update. I updated it, now it even has XIP porting! Look for the walkthrough link for those who want to know how to do it by hand.

ivanmmj said:
Update. I updated it, now it even has XIP porting! Look for the walkthrough link for those who want to know how to do it by hand.
Click to expand...
Click to collapse
thanks!
ill use the nice and very easy walkthrough

Can you added support for htc wizard?

This is ancient. I haven't worked on this for ages. You no longer need this to port. There are much easier methods out there. Remind me again and I'll research it later.

By any chance, are you putting up .07 SJK with 28005/8 tonight. I kinda would like to reference what I did with your kitchen with what you are gonna do with yours.

Yes, I am. I'm actually in the mist of uploading it right now.

[Walkthrough] How to Port a ROM [XIP and SYS]

Obligatory Warning Label:
Use this at your own RISK. I cannot be held liable for any damage caused to your device by your own mistakes or by my mistakes in the instructions.
How to port a XIP:
Extract xip.bin from the build you want to port from
Download Bepe's XIPPort
Extract XIPPort to any folder
The folder should contain XIPPort.exe, pkgcommon.dll, and xip.bin you want to port.
Run XIPProt.exe
Press "Dump xip.bin" - This will create an OUT folder
Press "Make Pkgs"
Open the OUT folder and you will find two folders: Files and Modules
Copy the contents of MSXIPKernel and MSXIPKernelLTK with each folder (Files and Modules) and paste them to /ROM/XIP folder and replace. (Note: Don't worry about copying the .txt files, they are not needed.)
Source
How to port a SYS folder
Open your old SYS folder and copy the .VM and WinCENLS_WWE folders into your new SYS folder
Go to your old SYS\Shell and copy shell32.exe and shellres.dll into your new SYS\Shell
Source
Q&A
Q: What is the XIP?
A: It's the kernel of the ROM.
Q: What is the SYS folder?
A: It's where all the new apps included in each Windows Mobile release are stored.
Q: I did all this and I bricked my phone, help!!!
A: First, rest assured. Your phone is not bricked. See THIS thread on how to unbrick your phone. Secondly, refer to Q&A #4.
Q: This is too complicated... but I still want to port my own ROM. What should I do?
A: Easy. Use my EasyPortOven and the process will be automated.
Q: Where do I get the latest SYS folders? XIP's?
A: I don't know... Your guess is as good as mine. I just download Kaiser ROM's that have them since they tend to have the latest and greatest first. Do NOT PM me asking me where to find them.

well done ,thanks.

ivan i love you...lol just kidding silly goose but thanks a million

Ivan:
Can XIP or SYS folders be ported over different language ROMS?
Say... I have my spanish HTC WM6 ROM, can I port an english WM6.1 over it to obtain an unofficial spanish WM6.1?
I assume the XIP folder could be ported but porting the SYS folder would end with a spanish ROM and multiple applications in WWE (without even starting to think about localization codes troubles)
Thanks.

le_hades said:
Ivan:
Can XIP or SYS folders be ported over different language ROMS?
Say... I have my spanish HTC WM6 ROM, can I port an english WM6.1 over it to obtain an unofficial spanish WM6.1?
I assume the XIP folder could be ported but porting the SYS folder would end with a spanish ROM and multiple applications in WWE (without even starting to think about localization codes troubles)
Thanks.
Click to expand...
Click to collapse
You'd have to go through every file in the OEM folder and find every misdirected link (because of the different language) as well as replace every MUI. So in short, no it's not possible unless you have a LOT of time and want to work really hard. What I would do is just use any of the readily available Spanish Herald ROMs to obtain your OEM files.

mm this is a "fast" and dirty way:
If you use in.ex a 19199 build (0409 wwe)
you need to extract all mui files from 04xx (your langauge from another build, if you use wm6.1 you need to use mui from another wm6.1 build)
rename them from 04xx to 0409, replace all in you 19199 build with the new renamed ones
this can be done both in OEM and SYS

The thing is that i'd like to make a herald spanish 6.1 ROM but I can't find none to port on kaiser forums etc, so i was thinkong about alternatives

ivanmmj said:
Obligatory Warning Label:
Use this at your own RISK. I cannot be held liable for any damage caused to your device by your own mistakes or by my mistakes in the instructions.
How to port a XIP:
Extract xip.bin from the build you want to port from
Download Bepe's XIPPort
Extract XIPPort to any folder
The folder should contain XIPPort.exe, pkgcommon.dll, and xip.bin you want to port.
Run XIPProt.exe
Press "Dump xip.bin" - This will create an OUT folder
Press "Make Pkgs"
Open the OUT folder and you will find two folders: Files and Modules
Copy the contents of MSXIPKernel and MSXIPKernelLTK with each folder (Files and Modules) and paste them to /ROM/XIP folder and replace. (Note: Don't worry about copying the .txt files, they are not needed.)
Source
How to port a SYS folder
Open your old SYS folder and copy the .VM and WinCENLS_WWE folders into your new SYS folder
Go to your old SYS\Shell and copy shell32.exe and shellres.dll into your new SYS\Shell
Source
Q&A
Q: What is the XIP?
A: It's the kernel of the ROM.
Q: What is the SYS folder?
A: It's where all the new apps included in each Windows Mobile release are stored.
Q: I did all this and I bricked my phone, help!!!
A: First, rest assured. Your phone is not bricked. See THIS thread on how to unbrick your phone. Secondly, refer to Q&A #4.
Q: This is too complicated... but I still want to port my own ROM. What should I do?
A: Easy. Use my EasyPortOven and the process will be automated.
Q: Where do I get the latest SYS folders? XIP's?
A: I don't know... Your guess is as good as mine. I just download Kaiser ROM's that have them since they tend to have the latest and greatest first. Do NOT PM me asking me where to find them.
Click to expand...
Click to collapse
Great job bro,

ivan you rock!!
I learn so much from reading your threads.
I think im almost ready to cook a rom.
I was wondering if you could be my mentor??

It works and works very well, however, I have ported from Hermes XIP CE OS 19949 & build 19949.1.1.1
to Atom from orginal XIP and I have CE OS 5.2.1921 & build 19949.1.1.1 (WM6.1) how to gain CE of 19949? thank you very much for sharing.

homer285 said:
It works and works very well, however, I have ported from Hermes XIP CE OS 19949 & build 19949.1.1.1
to Atom from orginal XIP and I have CE OS 1921 & build 19949.1.1.1 (WM6.1) how to gain CE of 19949? thank you very much for sharing.
Click to expand...
Click to collapse
You ported the XIP AND the SYS folder?

Thanks for your reply, yes I did.

homer285 said:
Thanks for your reply, yes I did.
Click to expand...
Click to collapse
Are you using the imgfs.bin/os.nb from the Atom? The only time I've seen that is when you're using the imgfs.bin/os.nb from another device. It "lines up" enough for the ROM to work but somethings like the version numbers don't "line up." I'd need more information to find out what happened. Also, did you change the DPI of the ROM for any reason? or the DPI files?

ivanmmj said:
Are you using the imgfs.bin/os.nb from the Atom? The only time I've seen that is when you're using the imgfs.bin/os.nb from another device. It "lines up" enough for the ROM to work but somethings like the version numbers don't "line up." I'd need more information to find out what happened. Also, did you change the DPI of the ROM for any reason? or the DPI files?
Click to expand...
Click to collapse
yes Im using the Diskimage_Ver.nb0 from Atom in Rom folder, tried by hand and EasyPortOven same result, only build is porting not CE OS info. Perhaps I need a new XIP to try, anyway thanks for this great tool it really makes porting easy, seriously.
Edit: So the trick for me was the Atom needed porting directly, all modules must have address changed and then ported to diskimage_Ver via XIPPORT, drop into Kitchen/ROM folder along with everything mentioned here .

can anyone confirm if this works for the kaiser, and if it doesn't, what to use for the kaiser?
thanks in advance

I've heard that Keeping your original Device MetaData hive files isn't that important as the Hive Files get created.
But just to be on the Sure side.
When you put the Hive files from MetaData folder into the New Build from the Ported Sys.
Won't that make hive files with unneeded Reg entries?
instead of sticking with your original device Hive Files?

€dit: Wrong thread, sorry!

Drivers?
What about the drivers and files specific to the device?
Is it included in the .VM folder? Is it not necessary to copy the .ROM folder too?
So, in essence, I have to just copy the folders you have specified to the new SYS and XIP folders and use BuildOS. To cook a light and clean ROM, only these two folders are enough, right?
BTW, what is the OEM folder for? In the kitchens, I have used, they contain a few folders like OEMAPPS, OEMDRIVERS, etc, which in some kitchens are placed in the SYS folder instead.
I don't know where to place those folders. Is the location of those folders irrelevant? I am kinda noob to cooking. I've played with it a lot of times with mixed results. I am building it for Tornado btw.

rajathvsm said:
What about the drivers and files specific to the device?
Is it included in the .VM folder? Is it not necessary to copy the .ROM folder too?
So, in essence, I have to just copy the folders you have specified to the new SYS and XIP folders and use BuildOS. To cook a light and clean ROM, only these two folders are enough, right?
BTW, what is the OEM folder for? In the kitchens, I have used, they contain a few folders like OEMAPPS, OEMDRIVERS, etc, which in some kitchens are placed in the SYS folder instead.
I don't know where to place those folders. Is the location of those folders irrelevant? I am kinda noob to cooking. I've played with it a lot of times with mixed results. I am building it for Tornado btw.
Click to expand...
Click to collapse
Things have changed a lot since I wrote this... but:
The drivers are in the OEM folder (as well as most of the device specific stuff.)
You need the OEM, SYS and XIP in order to make ANY ROM.
You can move your OEM into your SYS but it makes it harder to port newer builds to your ROM later on.
You only need the .VM folder, not the .ROM folder. The kitchen will autoadjust itself.

Yep its been a long time... but is useful on old kitchens
I gues i have an hybrid
cause the process i use is like EXT packages + OEM packages + SYS + XIP
Something about a platform rebuilder + oldschool buildOS hahaha
Maybe you can help me Ivan using your process to port the xip i DID it! it works the sys too but....
I port the SYS from xbeta.cn hermes WWE, changing the .VM and shellres you know... and the xip usin xipport everything goes fine I port the Xip from Kaiser... but
But now everything i install says certificates untrested... i instal sdkcerts and nothing happends
do you think i port the sys or xip wrong?
thanks in advance I dont have an Herald, I had an hermes... but i think the process is the same...
wm6.5 build 21812

where are .dsm files?

Sorry for my English ...
I'm trying to learn how to build a kitchen and I followed the BEPE's guides perfectly but I have a problem:
When I use "NBHextract.exe" on "RUU_signed.nbh" the file that I get is "00_OS.nb" and not "OS.nb" as in BEPE's guide, same for the file "00_OS.nb.playload" has the same characteristics, and I know not explain why.
Also, I can not use in any way the "packagebuilder" tool to rebuild the "xip" folder because after having dumped "00_OS.nb.playload" the xip folder that I know, does not contain within it the file "*. dsm " essential to the operation of the tool.
can someone help me? (sorry but I translate before answering for now)
Thank you!
PS: other problem..
When I use "Dump_800" on "00_OS.nb" the files that I get are "00_OS.nb.playload", the IMGFS folder and the IMGFS.BIN.
This IMGFS.BIN was to be automatically erased at the end of the process of dumping, but strangely still active and has a size of about 63 MB, and in the prompt window, at the end of the process of dumping, i read this:
C:\xxxxxxxxxx\IMGFS.BIN
Access denied.
Where I wrong?
Thanx 4 all..

Any idea?...
Anything?...
That relief, then I am not the only one who does not understand anything!

ciko84xp said:
Any idea?...
Anything?...
That relief, then I am not the only one who does not understand anything!
Click to expand...
Click to collapse
I can't help you either ... try to PM one of the Chef you knew from the forum.

ciko84xp said:
Sorry for my English ...
I'm trying to learn how to build a kitchen and I followed the BEPE's guides perfectly but I have a problem:
When I use "NBHextract.exe" on "RUU_signed.nbh" the file that I get is "00_OS.nb" and not "OS.nb" as in BEPE's guide, same for the file "00_OS.nb.playload" has the same characteristics, and I know not explain why.
Also, I can not use in any way the "packagebuilder" tool to rebuild the "xip" folder because after having dumped "00_OS.nb.playload" the xip folder that I know, does not contain within it the file "*. dsm " essential to the operation of the tool.
can someone help me? (sorry but I translate before answering for now)
Thank you!
PS: other problem..
When I use "Dump_800" on "00_OS.nb" the files that I get are "00_OS.nb.playload", the IMGFS folder and the IMGFS.BIN.
This IMGFS.BIN was to be automatically erased at the end of the process of dumping, but strangely still active and has a size of about 63 MB, and in the prompt window, at the end of the process of dumping, i read this:
C:\xxxxxxxxxx\IMGFS.BIN
Access denied.
Where I wrong?
Thanx 4 all..
Click to expand...
Click to collapse
What rom are you trying to dump? if it is a custom rom....built by the new kitchen, it won't be dumpable. You will have to get a base from a chef or dump a factory rom.

parleyp said:
What rom are you trying to dump? if it is a custom rom....built by the new kitchen, it won't be dumpable. You will have to get a base from a chef or dump a factory rom.
Click to expand...
Click to collapse
I downloaded this "RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship", which should be the Official HTC ROM for TYTN II (my device), but I have the same errors described in the first post using the BEPE's kitchen!
What do you mean by "You will have to get a base from a chef?
I do not believe that any chef would give me his base, should give me the entire folder containing the kitchen built! Or not?

sorry for my english...
I try to dump the various types of ROM, but I always make the same mistakes! I do not know how ... believe me I tried all possible solutions!
But I do not surrender ... sooner or later arrive at a solution! Even at the cost of start over with another kitchen!
How many kitchens are there? tell me if you know there are others beyond that of bepe?

I am having the same issue with Bepes kitchen - I have the official signed rom from Sprint for the Mogul and every time I try to use dump_800.bat on the OS.nb file, it fails and says access is denied...

ciko84xp said:
sorry for my english...
I try to dump the various types of ROM, but I always make the same mistakes! I do not know how ... believe me I tried all possible solutions!
But I do not surrender ... sooner or later arrive at a solution! Even at the cost of start over with another kitchen!
How many kitchens are there? tell me if you know there are others beyond that of bepe?
Click to expand...
Click to collapse
There is KaiserKitchen by _Alex_ or KaiserChef by mbarvian and a few others - They both exist on the Wiki.
If the IMGFS.bin won't delete it's not that bad, just try and delete it afterwards.
If you are getting 00_OS.nb it might not be the orginal nbh you are dumping. I get 03_OS.nb when I dump the 3.34 HTC Kaiser ROM (which I rename to OS.nb before dumping). I also get 00_Unknown.nb, 01_SPL.nb 02_MainSplash.bmp (and .nb). Do you get any other nb files?
What the link for the ROM, and why are you using that one for the base? There are newer builds (like the 3.34).
Ta
Dave

DaveShaw said:
There is KaiserKitchen by _Alex_ or KaiserChef by mbarvian and a few others - They both exist on the Wiki.
If the IMGFS.bin won't delete it's not that bad, just try and delete it afterwards.
If you are getting 00_OS.nb it might not be the orginal nbh you are dumping. I get 03_OS.nb when I dump the 3.34 HTC Kaiser ROM (which I rename to OS.nb before dumping). I also get 00_Unknown.nb, 01_SPL.nb 02_MainSplash.bmp (and .nb). Do you get any other nb files?
What the link for the ROM, and why are you using that one for the base? There are newer builds (like the 3.34).
Ta
Dave
Click to expand...
Click to collapse
Sorry for my english.. i try to write wath i want tell you....
Problem solved... with "KaiserKitchen" by _Alex_ I have solved all problem with one file called "KaiserKitchen.batch"... this little application, extract .nbh file, dump IMGFS.BIN and create a SYS and OEM folders, dump OS.nb.payload and create a XIP folder... ALL IN ONE STEP!!! IT'S FANTASTIC...!
Yesterday I have cooked and flashed my 1st ROM... really ruins... but the feel thrill don't have comparisons!!!
Now i don't understand wath should i do to take the SYS folder by one ROM and build inside another ROM.. ex. i want to take the SYS folder by your ROM and build in my own ROM...! to do this, i need to copy also your XIP folder?
Sorry for the english and for the ignorance... but I'm beginners for now...!

ciko84xp said:
Sorry for my english.. i try to write wath i want tell you....
Problem solved... with "KaiserKitchen" by _Alex_ I have solved all problem with one file called "KaiserKitchen.batch"... this little application, extract .nbh file, dump IMGFS.BIN and create a SYS and OEM folders, dump OS.nb.payload and create a XIP folder... ALL IN ONE STEP!!! IT'S FANTASTIC...!
Yesterday I have cooked and flashed my 1st ROM... really ruins... but the feel thrill don't have comparisons!!!
Now i don't understand wath should i do to take the SYS folder by one ROM and build inside another ROM.. ex. i want to take the SYS folder by your ROM and build in my own ROM...! to do this, i need to copy also your XIP folder?
Sorry for the english and for the ignorance... but I'm beginners for now...!
Click to expand...
Click to collapse
There are a few tutorials on porting the SYS and XIP. The concept in bepe's kitchen videos is the same for the SYS in most kitchens (be aware of resolution and language specific files).
For the XIP, have a read around, there are many threads and tutorials on how to do it. But normally the XIP and SYS versions should match (or be very close).
Dave

DaveShaw said:
There are a few tutorials on porting the SYS and XIP. The concept in bepe's kitchen videos is the same for the SYS in most kitchens (be aware of resolution and language specific files).
For the XIP, have a read around, there are many threads and tutorials on how to do it. But normally the XIP and SYS versions should match (or be very close).
Dave
Click to expand...
Click to collapse
ok Dave.. I follow your advice! then you story if I have made progress ...! thanks!