my phone is stuck on splash screen.nothing happenting.plz some one help me.
mine one is g3.cid unlocked,.os is showing 2.15.13.27.i'm trying to re flash again.nothing happenin.it says pda is not connected
Damn dude......you just bricked your device!
Nah...lol. Just follow the steps in G3.2 and you'll be good to go again.
Nah...lol. Just follow the steps in G3.2 and you'll be good to go again.
http://forum.xda-developers.com/showthread.php?t=298613
GQ8125 said:
Nah...lol. Just follow the steps in G3.2 and you'll be good to go again.
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
oh thank god.thank you very much.i thot i lost my phone.i was thinkin to call tmobile to replace my phone.thankx bro
Related
I flashed a new ROM on my fuze and after turning it on- it just gets stuck on the start screen! It says
Smart Mobility
Test Only
Not for Sale
And then i says the following on the right bottom corner:
R 1.02.25.32
G 52.39c.25.22
D 1.95.00.00
And the following on the left bottom corner:
U
I did a hard reset three times but it is still stuck~!! PLEASE HELP ME OUT!
prateeksach said:
I flashed a new ROM on my fuze and after turning it on- it just gets stuck on the start screen! It says
Smart Mobility
Test Only
Not for Sale
And then i says the following on the right bottom corner:
R 1.02.25.32
G 52.39c.25.22
D 1.95.00.00
And the following on the left bottom corner:
U
I did a hard reset three times but it is still stuck~!! PLEASE HELP ME OUT!
Click to expand...
Click to collapse
Reflash, basically same thing happened to me on my first flash...what rom did u use? etc etc, try another rom
meth0dGSX said:
Reflash, basically same thing happened to me on my first flash...what rom did u use? etc etc, try another rom
Click to expand...
Click to collapse
I want to do that! But since it wont turn on, I cant connect it through active sync or the WMDC, so i cant flash a new rom!!! Is there some other way????? PLEASE HELPPPPP
Did you follow the instructions and do the Hard SPL first? you can flash from the bootloader or a SD card, read up before u go flashing
meth0dGSX said:
Did you follow the instructions and do the Hard SPL first? you can flash from the bootloader or a SD card, read up before u go flashing
Click to expand...
Click to collapse
I did a hard SPL the first time i flashed a rom on my fuze! How do u flash from a bootloader or a SD card????? Can u tell or guide to where i might know?
prateeksach said:
I did a hard SPL the first time i flashed a rom on my fuze! How do u flash from a bootloader or a SD card????? Can u tell or guide to where i might know?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=448008
http://forum.xda-developers.com/showthread.php?t=410150
prateeksach said:
I did a hard SPL the first time i flashed a rom on my fuze! How do u flash from a bootloader or a SD card????? Can u tell or guide to where i might know?
Click to expand...
Click to collapse
Did you confirm it was un-locked? If you do not know what bootloader is you need to go the Wiki and definitely read up some more....you should not have flashed without reading that thoroughly....after enter bootloader and confirm if it is un-locked and then you can proceed...
Now i know all the stuff! I checked the bootloader and stuff i have a hard SPL and now im going to flash a new rom from sd card! hope it works!
prateeksach said:
Now i know all the stuff! I checked the bootloader and stuff i have a hard SPL and now im going to flash a new rom from sd card! hope it works!
Click to expand...
Click to collapse
You should be good to go then....
wow, I'm surprised so many people don't flash via SD.. only way to go in my opinion.. otherwise just asking for trouble eventually
Black6spdZ said:
wow, I'm surprised so many people don't flash via SD.. only way to go in my opinion.. otherwise just asking for trouble eventually
Click to expand...
Click to collapse
Why asking for trouble? I've been flashing via PC for so long, so many times (cooked firmware and radio), on so 4 devices.. I have not encountered a brick ever. in fact, most of the issues you can just go into bootloader mode and reflash again..
I did it and it worked! This is a way easier method! I like it!!! BUT I STILL HATE MY PHONE cause I had a G1 last week and it got stolen! I hate it when that happens. I only got to use it for one week! Some B***H stole it!
i flashed SCH-I500_USCC_DI14_REL.tar.md5。When I use odin Installation cmw ,the phone stopped at the samsung splash screen does not work. How can I do?
qq25 said:
i flashed SCH-I500_USCC_DI14_REL.tar.md5。When I use odin Installation cmw ,the phone stopped at the samsung splash screen does not work. How can I do?
Click to expand...
Click to collapse
You also need to flash the pit file. If you follow the instructions in this thread, it will tell you exactly what to do. You don't use Odin to install CWM, btw.
Phidelt82 is correct.
Start with that thread. That will get you back to stock.
Then this thread. How to Mod My MEZ. That will get you started from Stock to get Rooted and install CWM and then its your choice of ROM and Theme if you choose.
please please please.. read. read and read everything twice. go slow and have patience.
And ask questions. I do not get a chance to post so much at the moment but always willing to help where I can if I can.
now my phone can not to work。I press step by step, and now my phone finish except call 911, any other phone cannot dial, what reason be?
Need to activate?How should do?
qq25 said:
Need to activate?How should do?
Click to expand...
Click to collapse
Just cool down. Your phone is booting. It works. I don't work for USCC so I'm not exactly sure how it works but I don't know if you would have to activate it again. I suggest you take the phone to the store and tell them it stopped working. They will probably get it all fixed up for you there. Since it's stock right now you shouldn't have any problems (=
PS: In the future, don't dial 911 to 'test' whether you phone works or not.. 0_o
dcow90 said:
Just cool down. Your phone is booting. It works. I don't work for USCC so I'm not exactly sure how it works but I don't know if you would have to activate it again. I suggest you take the phone to the store and tell them it stopped working. They will probably get it all fixed up for you there. Since it's stock right now you shouldn't have any problems (=
PS: In the future, don't dial 911 to 'test' whether you phone works or not.. 0_o
Click to expand...
Click to collapse
thanks ,i use this phone in china ^_^ 。
qq25 said:
thanks ,i use this phone in china ^_^ 。
Click to expand...
Click to collapse
Why would you be using a US Cellular phone in China?
phidelt82 said:
You also need to flash the pit file. If you follow the instructions in this thread, it will tell you exactly what to do. You don't use Odin to install CWM, btw.
Click to expand...
Click to collapse
Woah, what do you mean you don't use Odin to install CWM? The newb guide
http://forum.xda-developers.com/showthread.php?t=931169
says "
1.Shut phone off, pull battery out and leave it out.
2.Run odin (assuming you have it installed)
3.Load the cwm-recovery-all.tar file into the PDA spot"
And i've read like 15 other how tos that all say the same thing. That sounds like you install CWM with odin.
i have an [email protected] lg thrill its unlocked for t mobile whill flashing it to ginger bread remove my unlock???
No. You will need to re-root and re-flash clockworkmod recovery though.
silencethenoise said:
No. You will need to re-root and re-flash clockworkmod recovery though.
Click to expand...
Click to collapse
Thancks man somebody told i would loose my unlock how can i flash it i download a kdz file and a lg update program? ??
flow alkaeda said:
Thancks man somebody told i would loose my unlock how can i flash it i download a kdz file and a lg update program? ??
Click to expand...
Click to collapse
First off, you have some reading to do. The resources are pretty straightforward but I don't recommend proceeding until you're confident you understand what it'll take. Almost nothing you'd do would permanently brick your phone, but some of them could be a bigger pain to recover from than just getting the process right.
-How to flash the KDZ
http://forum.xda-developers.com/showthread.php?t=1287236
-How to prevent the tool from the above thread from updating and failing
http://forum.xda-developers.com/showthread.php?t=1473781
-The v21D KDZ
http://forum.xda-developers.com/showthread.php?t=1537936
-The root method for v21D
http://vulnfactory.org/blog/2012/02/26/rooting-the-lg-thrill-optimus-3d/
Read all of those THOROUGHLY before proceeding.
I suggest before visiting the above links, first to read the concise and very well organized guide of Lestat here:
http://forum.xda-developers.com/showthread.php?t=1540163
silencethenoise said:
First off, you have some reading to do. The resources are pretty straightforward but I don't recommend proceeding until you're confident you understand what it'll take. Almost nothing you'd do would permanently brick your phone, but some of them could be a bigger pain to recover from than just getting the process right.
-How to flash the KDZ
http://forum.xda-developers.com/showthread.php?t=1287236
-How to prevent the tool from the above thread from updating and failing
http://forum.xda-developers.com/showthread.php?t=1473781
-The v21D KDZ
http://forum.xda-developers.com/showthread.php?t=1537936
-The root method for v21D
http://vulnfactory.org/blog/2012/02/26/rooting-the-lg-thrill-optimus-3d/
Read all of those THOROUGHLY before proceeding.
Click to expand...
Click to collapse
it whont let me it keeps saying that my phone and the cable arent conected and it gives me this error to saying that i need a conection and i have a conection i really dont know what to do
flow alkaeda said:
it whont let me it keeps saying that my phone and the cable arent conected and it gives me this error to saying that i need a conection and i have a conection i really dont know what to do
Click to expand...
Click to collapse
yes i could do it thanckssss im in the proces of flashing it its so complicated wow but i hope i dont lose my unlock
Hi, can someone point me in the right direction of how to unroot and relock my bootloader on an AT&T (D850) LG G3? I got my G4 and want to sell my G3 as basically like new, locked, unrooted.
Thanks!
IlyaKol said:
Hi, can someone point me in the right direction of how to unroot and relock my bootloader on an AT&T (D850) LG G3? I got my G4 and want to sell my G3 as basically like new, locked, unrooted.
Thanks!
Click to expand...
Click to collapse
G4 , Anyway My guide includes the only method for going back to complete 100% stock, Use the tot method.
http://forum.xda-developers.com/showthread.php?t=2785089
hyelton said:
G4 , Anyway My guide includes the only method for going back to complete 100% stock, Use the tot method.
http://forum.xda-developers.com/showthread.php?t=2785089
Click to expand...
Click to collapse
Thank you sir!
Yes, the G4 is excellent
hyelton said:
G4 , Anyway My guide includes the only method for going back to complete 100% stock, Use the tot method.
http://forum.xda-developers.com/showthread.php?t=2785089
Click to expand...
Click to collapse
So I get to the part where I hit the yellow arrow but nothing happens. If I unplug the phone and plug it back in, COM41 says "Waiting for connection..." and nothing else happens.
Any ideas?
EDIT: I had installed new LG drivers for the G4, I thought those would be good but had to install the ones in the guide. My bad .
IlyaKol said:
So I get to the part where I hit the yellow arrow but nothing happens. If I unplug the phone and plug it back in, COM41 says "Waiting for connection..." and nothing else happens.
Any ideas?
EDIT: I had installed new LG drivers for the G4, I thought those would be good but had to install the ones in the guide. My bad .
Click to expand...
Click to collapse
Glad you got it! Enjoy the G4 . I'll prob wait a few til they go down in price used.
Sent from my iPhone using Tapatalk
hyelton said:
G4 , Anyway My guide includes the only method for going back to complete 100% stock, Use the tot method.
http://forum.xda-developers.com/showthread.php?t=2785089
Click to expand...
Click to collapse
IlyaKol said:
So I get to the part where I hit the yellow arrow but nothing happens. If I unplug the phone and plug it back in, COM41 says "Waiting for connection..." and nothing else happens.
Any ideas?
EDIT: I had installed new LG drivers for the G4, I thought those would be good but had to install the ones in the guide. My bad .
Click to expand...
Click to collapse
I got status 3, I'm good! Thanks for the assist!
IlyaKol said:
I got status 3, I'm good! Thanks for the assist!
Click to expand...
Click to collapse
I'm awaiting for some G4 kdz and tots before I open my G4 back to stock guide.
Sent from my iPhone using Tapatalk
Hi, I tried to root my phone with this guide androidxda.net/how-to-root-att-lg-g-flex-2-on-android-5-1-1-lollipop-with-one-click-root-method/
Anyway, when the phone rebooted it got stuck at the LG Logo and a Hard Reset doesn't do squat.
It just keeps bootlooping....
Any ideas?
Any help would be appreciated.
I have the same problem but I was able to root and it went into boot loop after I tried to apply the dual screen mod.
why don't enter recovery mode and flash KDZ again?
staticx1 said:
why don't enter recovery mode and flash KDZ again?
Click to expand...
Click to collapse
I will try to flash it, although I never understood what *.DLL file the Flashtool is looking for?
All I got my hands on was this *.KDZ file for my region.
Help..?
mrbennich said:
I will try to flash it, although I never understood what *.DLL file the Flashtool is looking for?
All I got my hands on was this *.KDZ file for my region.
Help..?
Click to expand...
Click to collapse
You need to install Visual C++ runtime library....
Just follow this guide and you'll be OK
http://forum.xda-developers.com/showthread.php?t=2797190
staticx1 said:
You need to install Visual C++ runtime library....
Just follow this guide and you'll be OK
http://forum.xda-developers.com/showthread.php?t=2797190
Click to expand...
Click to collapse
I'll try that out and return to you when I get the results. Working at the moment.
Thanks in advance!
Did you ever get this to work?
winkyeye said:
Did you ever get this to work?
Click to expand...
Click to collapse
I'm sorry to keep you waiting for my reply, I've been working 13h straight two days in a row so I haven't had the time.
Although I finish work in 8h - then I will try this out.
Thanks for checking though!
winkyeye said:
Did you ever get this to work?
Click to expand...
Click to collapse
Okay, I followed the guide and it worked! My phone lit up like a X-Mas Tree!!
THANK YOU!!