NEED HELP~~~ - JAMin, XDA Neo, S200 Software Upgrading

hi all~
HELP~~i try to upgrade my 818pro to wm6 CHT...finished than hard reset, but now goto the red,green,blue screen......
now how to do...... pls help
thx

hi all~
i found the solution. i get this <RUU_Prophet_220734_2207114_024721_NVID>
rom before. i try this rom can complete to fixed the bootloader screen!
thx a lot
i think maybe the wm6 rom cht have the problem , then make the machine cannot finish to flash the system.

Related

Qtek s200 Always in bootloader

Hi to all,
i have try to format S200 Qtek and now when i power on, i always have poot loader screen...
please what is wrong?
must i flash for solve pb?
if yes link with good french rom will be appreciate
thanks in advance for help
regards
First, you have provided absolutely no useful information:
What was on your device before you attempted to flash the Rom?
What Rom did you attempt to flash?
What info is displayed on the Bootloader screen?
If you can't answer these simple questions then you have not studied enough to even think of flash your Rom.
yes your right i have not say anythink in this post... sorry
ok so first i want to say i have solve my pb by flashing my ROm with
RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship.exe
first it was 2.9 rom version.
then the pb is come when i try to reset device with jafwm.
(service / reset device)
thanks for your reply
regards

Smart1 WM6 -> WM5

Hey !
Currently i have the Smart1 WM6 Rom installed which i think work great ! But i need to be able to charge my phone when its turned on so i have to go back to WM5.. So.. Can anyone tell me what i need to do to go back to WM5 ? Do i need to do any special things?
Thanks !
~D
Da9L said:
Hey !
Currently i have the Smart1 WM6 Rom installed which i think work great ! But i need to be able to charge my phone when its turned on so i have to go back to WM5.. So.. Can anyone tell me what i need to do to go back to WM5 ? Do i need to do any special things?
Thanks !
~D
Click to expand...
Click to collapse
*..sigh
read the wiki/use the advanced search function.. it's been explained a 1000 times. but allright..
- Just flash back to an AKU2.2(NoVendorID)-ROM (either Jesterz's or the one from smart1's thread)
Do this by entering bootloader (holding down camera-button and reset with stylus), pluggin in the USB and executing the *.exe on your PC.
- When flashed back to AKU2.2, you can flash any AKU2.2/2.3/3.3/WM6-ROM you want, as long as you read the install-notes of that particular ROM.
grtz

TCK o8 rom help rom

Hello i have tck o8 (oh my god) and i need to change rom from wm5 wm6. I'm new with that and with pda's and i have not idea how i can doing this. I search and i have did everything from here and nothing. Please help me someone. Now i'll do ing reset on my device and im waiting. Can i install athineos rom from here? Please someone help me...
Regards.
screen shot from my device hxxp://www.skroutz.gr/sku_pictures/0015/3702/TCK-O8_medium
nothing.
Nothing? I have tried to put in bootload but i don't know how for this device. sspl.exe not working... And what? ???
...
No one can't help me?
:
I have already try to install many rom's but nothing. Know someone who i can find the boot load of this phone? Its very inportant for me and i have not idea.....

HELP!!

can someone help me please, I have an i-mate JASJAM and I installed hardSPL then a wm6 ROM (by Josh) on it, and now I want to restore it back to my original wm5, I tried hard resetting but this doesn't help. Can someone direct me in the right direction to do so? Any help is appreciated, thanks
you have replaced the rom it's gon
only way to get it back is to flash your device
with a wm5 rom made for the device

start menu does not work in K-Jam WM6.5 help !!

hello
I have K-jam and I have 2 problems.
First : when I flash WM6.5 , start menu does not start after a couple of minuets of flashing the new rom. I have tries 6 copies of WM6.5 from this forum but the same result every time.
Whow can I fix this bug ? pleas help. whithout start menu I can not use my K-jam
Second problem: I have arabizer suite for my device and it works fine with WM6.1. however when I flsh WM6.5 and instal Arabic language , the external key boar either stuck or does not write in Arabic.
note: I am using the same Arabizer suite from Imaginet for WM6.1 and it works fine but with WM6.5 it does not work.
I have tried lots of Arabizer Suites and all of them fail.
please help. I like WM6.5 from this forum but I cant use it because of these problems.
can u tell about your device g4 or g3? radio and spl? and which rom??
my K-Jam details
My PDA is
K-Jam G3
SPL 3.08
Radio: 2.07.10
Roms:
1- XDA2_s_WM6.5_v4.1
2- MSD-Wizard-WM6.5-23071
3- Manila2D_Black_V14_WWE
4- X2H_WM6.5_M2D_v2.5 Manilla interface
5- XDA2_s_WM6[1].5_v2.5
6- XDA2_s_WM6.5_Build_21234_CLEAN
I have downloaded the above copies from this forum and they all have the same probem.
please help
hmmm ok now again flash X2... win 6.5 without memory card and after flash when coustomization will start u just softreset by your styllus
link is in post 5
http://forum.xda-developers.com/showpost.php?p=3459147&postcount=6
from above link u can download the rom
I will try and let you know
thanks
the same problem
your solution did not work with me
thanks alot
any other solution?
please
up
please help. I still can not use WM6.5 on my K-Jam because of start menu
help
after flashing the rom intal this cab
salooo said:
after flashing the rom intal this cab
Click to expand...
Click to collapse
thank you for trying to help me
but where is the cab you mentioned?
sorry i forgot
I have solved the problem
I have installed SPB Home immediatly after I flashed the rom
the start menu now works fine with me
this is day 5 of using WM6.5 and every thing is good
thank you salooo for your cooperation

Categories

Resources