How to setup MMS manually? - JASJAR, XDA Exec, MDA Pro ROM Development

My network does not know the existence of WM6 devices yet (and WM5 as well) and did not prepare cab files with settings for MMS. Can somebody advice how manually setup MMS in Uni. I can fiddle with registry, but need some clues.

Ok. It is solved.

Related

Treo 750 with T-mobile GPRS/EDGE settings..?

I've tried setting up the Treo with the same GPRS settings I've used on the Wizard but it still doesn't work. Has anyone else run into this problem? Please share your settings.
sure
you just have to enter either wap.voicestream.com or internet2.voicestream.com in the Access point settings. I run a 750 with T-mobile for a while now with no problems.
I'm having the same problem with the Fido network. The settings that always work in WM5 devices won't work on this this unit. Can anyone shed some light on this? Are there some settings in the registry that need to be edited?
Nope. No reg settings needed. Just configure with the standard T-Mobile settings and go.
I've got it to work, somehow. I left the settings as they are and did a soft reset a couple of time and it worked. I actually gave up but it worked in the end without me realizing.
Another thing I've learned by messing with the settings, I can actually sign into Pocket MSN by taking out the proxy settings! This makes me very happy. I've also tried the same thing on my previous phone, the T-mobile MDA (Wizard) and the ended up with the same result!
I've just got a Treo 750 and I am on T-Mobile but I do not know what settings to enter to get onto the internet. Any ideas? Thanks.
if you have t-mobile, the setting should be loaded automaticly (it did to with my Treo at the german T-mobile). Or you use the manual on https://shop.dangaard.de/files/Qtek/Qtek.htm
There you can also download a setting cab which you can install - this will automaticly install the settings.

Upgraded from WM5 to WM6, now cannot configure MMS Settings

I have an Orange SPV M600 which used to have WM5 (MMS worked fine) but now I've 'upgraded' to WM6 (carefully following the instructions) using one of the cooked ROM versions and everything works wonderfully *except* for MMS. Basically, there are no configurable options for MMS inside the messaging program (you know, open the messaging program, click on menu BUT there is no 'MMS Configuration' option).
I seem to remember in the previous bog standard Orange WM5 version that 'MMS Composer' (manufactured by Arcsoft) appeared inside messaging but inside my new cooked WM6 it isn't. Can it be installed? Does it need to be installed? Is there a cab file that can install this? I'd really like to try and avoid formatting and having to try another ROM because of all the configuarion I've done...
Thanks guys
mms setting
try going to messaging> new mms> create the mms> then at the bottom of the phone usually the right soft key hit menu> options> mms options
hope this helps
HKW

MMS Settings for WM6

Any one knows how to configure the MMS settings for the WM6 firmwares?
I am unable to send / recieve MMS after "upgrading". Thanks.
JaLooNz said:
Any one knows how to configure the MMS settings for the WM6 firmwares?
I am unable to send / recieve MMS after "upgrading". Thanks.
Click to expand...
Click to collapse
the same proble whith my c600
but the 1° edition was good .works fine can nobody explane us a mistake?
thanks
Anyone knows how to hack the registry settings for M1?
http://www.miworld.com.sg/mms/mms_manu_setting_xphone.htm
I tried to change the address to the following, there is GPRS connection but wat's left is configuring the gateway correctly (which I do not know how to create a new entry in the registry).

MMS on WM6 (T-Mobile USA)

Well I have the MMS client in my build....
And if I load the T-Mobile GPRS/MMS setting CAB, it works.
However, I can't manage to MANUALLY configure it.
Every time I try to do a "send/receive" after setting it up I get an instant error, which implies that whatever the client is looking for in the connections, its not finding it.
Anyone manage to get this to work with manual configuration? I don't want to use the T-Mo CAB because it "hides" the connection profiles, which sucks bananas, and it also breaks connections when plugged into ActiveSync.

O2 MMS settings

Just started getting a problem with the MMS on my Serra and not sure if anyone can let me know theirs please.
Under connections/My ISP I have
Mobile Web - Cellular Line (GPRS,3G), mobile.o2.co.uk, o2web/password, DNS 193.113.200.200, Alt DNS 193.113.200.201
Mobile Web 2 - Cellular Line, mobile.o2.co.uk, o2web/password, DNS 193.113.200.200, Alt DNS 193.113.200.201
My Work Network
02 Active - Cellular Line (GPRS, 3G), wap.o2.co.uk, o2wap/password, user server specific
MMS Settings
o2uk - Gateway 193.113.200.195 port 8080, server address http://mmsc.mms.o2.co.uk:8002. Connect via My ISP
Thanks
Sorry all fixed myself, my proxy settings were incorrect
What exactly was the error - I still cannot get MMS to work even with your seetings from your post?
I found out that mine was that a proxy server was enabled. I hook mine up to my laptop while in the office to charge and activesync with my Exchange server. Hadn't realised that it also enables my office proxy server.
crazyC, is the SIM in your Serra on O2 contract or Pay and Go? I'm guessing it's the former, but if it's the latter I know the settings...
Is it just MMS that's not working, or is your data connection (via telephone I mean) not working either?
It was just MMS that did not work.
I am on contract, and after a lot of digging and trialling of cabs that should have fixed it, but didn't, I have sussed it out and tested it.
I will roll the settings into my O2 setup cab, test it, and then post it if anyone wants it.
YES! Please post it.
I am using these settings on my contract o2, htc touch pro. all my 3g and internet works... just no mms.
I have sat here for four hours now messing around with it...
any chance of posting the settings that worked for you?
Try this
MMS Settings
o2uk - Gateway 193.113.200.195 port 9201, server address http://mmsc.mms.o2.co.uk:8002. Connect via My Work Network
Other connections as per the normal O2 set up.
'My Work Network' shows up as O2 Active
Dont forget to set the O2MMS server as the default under MMS options
I havent tested this yet, but this cab SHOULD insert the O2 MMS settings - note you must already have the correct O2 network setup for calls and data, this is just the MMS bit.
im also having prblems with this, using the new Elite RC4. Im gunna reflash it and try again cuz i have fiddled with the settings too much
Edit - i tried the cab and the setting listed above it and neither worked for me
I have called O2 to see if they can help me and they sent me the some lame ass intruction which are exactly the same as on here... except afte you set up the o2web settings it says to use auto download for the rest :/
Whats the deal witht he proxy for the o2 active settings are they supposed to be on or off and if on, what do i set them as?
Installed the original O2 ROM to get all the settings working properly. It seems the missing details are in the WAP Proxy ones.
start - settings - connections - connection settings - manage existing under the 'my work network' (or whatever you renamed it too) - proxy (ensure use proxy is ticked) - advanced
WAP - 193.113.200.195:9201
SECURE WAP - 193.113.200.195:9203
Other than that settings are as they have been mentioned previously
MMS issues
I have extensively searched forum after forum and this seems to be the only thread with the sort of info i am searching for. I have installed TPC V3.1 Rom With required radio, everything works including MMS, however, no matter what settings i try i cannot receive normal sized pictures and any MMS videos go straight to the O2 website and all i get is a message your phone is not compatible with this type of message. Can anyone help, its really annoying............
I have tried the above .cab file and it doesn't work for me either.
Thanks in advance for any help.
O2 serra (raphael) win6.5, TPC v3.1 radio 1.14.25.05
Kevfm said:
I have extensively searched forum after forum and this seems to be the only thread with the sort of info i am searching for. I have installed TPC V3.1 Rom With required radio, everything works including MMS, however, no matter what settings i try i cannot receive normal sized pictures and any MMS videos go straight to the O2 website and all i get is a message your phone is not compatible with this type of message. Can anyone help, its really annoying............
I have tried the above .cab file and it doesn't work for me either.
Thanks in advance for any help.
O2 serra (raphael) win6.5, TPC v3.1 radio 1.14.25.05
Click to expand...
Click to collapse
Try some of these reg edits.
Thanks, but that is more for increasing the send size limit of mms, I can send them fine, but my network O2 cannot determine what phone I have and therefore only allows me to receive the smallest possible sized attachement.
I have tried numerous settings and radios to adjust this I've even tried the get settings feature and I get a txt back sorry we are unable to blah blah blah. with out going back to O2 stock rom i'm running out of options.......
Also I have never attemped to edit the registry
Again thank u for your reply......
EDIT......
Attempted reg edit, has had no affect, am I doing something Wrong.......?
o2 mms size problems
crazyC said:
I havent tested this yet, but this cab SHOULD insert the O2 MMS settings - note you must already have the correct O2 network setup for calls and data, this is just the MMS bit.
Click to expand...
Click to collapse
Hi guys, I have entered all the settings found on here and my mobile web and mms work but the mms messages received are resized to a tiny default size as mentioned on here.
Any chanch of an idiots guide to edit the registry so that o2 think it's another phone allowing me to received full size pics.
My phone is a Vodaphone UK HTC Touch Pro2 with O2 Pay Monthly Sim.
Any help is appreciated

Categories

Resources