Hello , I am owner of imate kjam unlocked phone.
My IPL / SPL ver is 2.16.
MY GSM ver is 02.07.10.
My OS ver is2.16.9.1.
I cooked the Crossbow_Reloaded_1.7_Final using core pro.
It completed 100% ok but when i restart my phone the OS its the same.
What i am doing wrong ?
I followed all the instructions step by step without having any problem.The only error i get its when the phone starts up after the upgrade when its installed the programs i get the error \windows\autoconfig.exe does not exist.
Please help me.
Thanks
i had the same problem any ideas?
Your Phone is CIDunlocked. You need to be CIDunlocked b4 you can upload the Rom Properly
Hi
I Buy 3days ago I-mate JAMin.
IPL 1.00
SPL 1.00.000
Image Version 1.0.9.1141.00
So first thing i read all posts about
upgrading to WM 6..........First Step was HardSPL G3 In stuck in withe screen and thats all...................So still my IPL 1.00 SPL 1.00.0000
ActiveSync works correctly.................So always when JAMin resets and coes to bootloader then after 10 second coming error 302 message.Afer soft reset it work again.
So I read many many posts for dummys and not dummys and i made i think 20-30 soft-hardreset download many many different roms.
Finaly i download original rom from I-mate homepage JAMin_WWE_ 2130923_21309112_020720_ship.exe still same problem stucks in bootloader and error 302.So then i read mtty1.42.exe can help but i didnt find how use this program i get it connected but there need write shomething?
And i read this post http://forum.xda-developers.com/showthread.php?t=353547 but PVtemp is not able download anymore.
So mabe somebody have idea.
In the moment i have installed Image Version 1.0.9.1141.00
And IPL 1.00 SPL 1.00.0000
What i did
1 Used 2 different computers
2 2 different cabels
3 Many different rom's
4 download original rom (also not work)
5 Many many times soft and hardreset
Used files
DiHardSPL G3rect_5_to_61_tool.zip
mtty1[1].42.zip (i dint find how use taht correctly)
JAMin_WWE_ 2130923_21309112_020720_ship.exe
Update_Package.zip
PDAMobiz_Prophet_WM6_V1[1].00_Step1.rar
etc
Sorry my bad english i hope you understand.
Regards Indrek
how to do
Safe proof plan do it like this.
1. First get the original Rom back and install it you can find the link on the forum.
2. Make a ROM update with the update Rom tool
3. Do hard SPL 3 or 4 usually its 3 after you syncronize with active sync.
4. Install the new Rom .
5. Wait for the device to start up.
Try the Mobiz Rom it worked in my case any questions feel free, bye.
the problem is i dont know how to do hard spl so can any one help me please am stuck and i have the same problem a white screen and nothing happins
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
You may have corrupted your DOC, you may need to use mtty to reformat it. Do some searching on how to do it.
Or try to use T750URT.exe to restore it, it comes with the Treo desktop updater.
similar problem
Hey guys,
After I flashed a WM6.5 costum ROM in my treo750 it works fine...until 4 hour after...the display just stay black. It´s on, but black!!
I´ve tryed reset, hard reset and force to reflashed to an original WM5.0 without success.
Does anyone know what is happening with my phone??
Thanks
i need help to flash wm 6.5 rom i've downloaded from here
can anyone one tell me how to do it in simple steps?
i don't know anything about roms
i didn't do any upgrade to my htc s710 device before
last thing my device has sim protection (sim unlocked)
thanks
first:
follow steps here:
USPL
second: download the rom you wish to use and install it same way as you installed hardspl!
3. finish!
thank you hashtowent i did as u said
and i finally got wm6.5 in my vox
and thanks to everyone here on this forum
i learned alot here about my vox
thank you
Hi Hashtowent,
Any idea why I am still stuck with ERROR 270 only with the WM6.5 in my E650? (I also followed your links and suggestions)
THX
Ant
Hi,
I tried today to update my VOX in rom WM 6.5 but I have the same problem as Antanico...
Someone can help me ppllleeeaaasseeeeee ???
Many thanks
No ?? Pleasseeee
I tried to follow all steps in USPL guide but still the same....
I have for now the ROM WM 6.1 from LeFab47 alias Fireburned
Guys... I had the same problem in my new VOX...(didnt have this issue in the older one)....
Jockey was considerate enough to point the following to me...... Used it and everything was absolutely fine....No error 270 etc...
There is one alternative to application unlock your phone. To properly application unlock the phone perform the steps as suggested to me by another friendly customer:
1. go to
http://www.modaco.com/index.php?s=&s...dpost&p=825304
2.Run MoDaCo_SPV_E650_de_Brand___Fix_Pack.PREP.CAB on the device
3. Run MoDaCo_SPV_E650_de_Brand___Fix_Pack_0.5.CAB on the device and
reboot.
This will solve your problem...if it doesnt....lemme know ..
thanxxx
Hi,
Many thanks for your answer but but but after run the 2.cab I still have the same result ;(
Whhhyyyyy mmeeeeeeeee !!!!
Just te be sure, i must follow steps in this order right ?
1°) Launch MoDaCo_SPV_E650_de_Brand___Fix_Pack.PREP.CAB
2°) Launch MoDaCo_SPV_E650_de_Brand___Fix_Pack_0.5.CAB on the device
3°) Restart
4°) Launch uspl_116_jockyw.bat
5°) Update ROM with "vox-USPL"
6°) Update ROM with custom ROM
???
after step 3...
try running the application unlock sda...
maybe will solve your problem
if it doesnt.....i will let you know another solution
thanx
.....same.....
Is it normal that at the end of step 4 I have the sceen with the tux after screen green, red,... and after nothing happend I must reboot the phone myself ??
All is OK nowwwwwww.
Like a newbie after step 4 I shut the phone instead of launch directly step 5.....
Thank you Indtram for your help
hi, i can't upgrade to windows mobile 6.5 because "error 270".
And when i launch the uspl, my vox shutdown and i restart it but nothing.
What have i to do?
thx
please read the complete thread and you will have the answer to ERROR 270....
hello
i have bougth a htc s710 which i wont to have a new windows on... wat most i do?. it is a risk?
It's no risk, do USPL as described in the sticky (or the Wiki) and then flash any ROM you want (for the S710 of course)
thank you very much
this was a good solution to this damn error
thank you very moch
Dr. Ahmed Zaher
Hi Mathitalia,
It is over 1 year from the issues we had.
Can you please tell me if your phone is working with Italian SIM cards?
Did you manage to SIM unlock it?
All the best,
Antanico
Hi..
I m the latest user to get into upgrading.. I have had a JAMin since March 2006 but never thot of updating it till now... (kinda sounds lame bt been bz with other stuff) .. anyhow.. I have some how managed to achieve the following in the past 5 days...
Ugrade my SPL from 1.0.0.0 to 2.13.x.x
Upgrade my SPL from 2.13.x to 2.20.x
Upgrade my WM 5 to WM 6 (by PDAVIET 4.0.0.3a)
Now I m stuck at this coz i apparently wanted to update my Jamin to Windows Mobile 6.5 and i really seem to like the roms by PDAVIET.. I have downloaded many 6.5 roms (e.g. bikertbi) but once i download the file and unzip it... i m left with 2 files namely.. prophet 6 and nk.nbf
now the problem comes as i try to install using prophet 6 tool.. (p.s. i have windows 7 and xp virtual machine installed which work quite brilliantly to upgrade/update my jamin rom ) the system tries to do hardspl and my jamin goes white.. and when it starts the flashing tool ... the RUU cannot find my pda ... then i switch to updating the rom using the RUU_NV_G3 update facility (my pda is G3).. and i can install the rom .. but after installing the pda restarts and its stuck in bootloader screen (3 colors) ..then i have to revert back to wm 5 (stable one) now i have done this abt 7 times and still the same screen shows up..
what i did like abt pdaviet rom was the installing tool which did wonderfully well.. (upgrade.bat file) and now i have been searching this forum (or at least trying to locate) for the windows mobile 6.5 rom by PDAVIET for JAMin/Prophet but i m unable to do so..
so i need help in installing the bikertibi rom or pls provide the download link for pdaviet wm 6.5 rom for jamin/prophet.
thnks