Dear all .... please how to unlcok Jamin with Password Key Caz i Missed the Password Key ....So can any one tell me how to solved this problem .
respactfully
use wiki ... make hard reset
how to make hard reset?
Hold down the camera button plus the comm manager button, keep them pressed, and press RESET with the stylus. That's how you make a hard-reset.
Be aware that you will lose all data on the phone if you do it.
Related
Hi, I've received a damaged qtek s200, which has non-working touchscreen. I can only use the buttons on the bottom of the front side, which is not enough to even unlock it. From the facts I've gathered someone tried to change rom in it and damaged it. On boot it says:
IPL:2.09
SPL:2.09.0000
GSM:02.07.20
OS: 2.9.7.24
I have no experience with pdas. Please help.
alex314 said:
Hi, I've received a damaged qtek s200, which has non-working touchscreen. I can only use the buttons on the bottom of the front side, which is not enough to even unlock it. From the facts I've gathered someone tried to change rom in it and damaged it. On boot it says:
IPL:2.09
SPL:2.09.0000
GSM:02.07.20
OS: 2.9.7.24
I have no experience with pdas. Please help.
Click to expand...
Click to collapse
first try hard reset by pressing camera button+comm manager button and reset the device keep holding the buttons down until you get the following message on the screen: "Press Send to restore factory default." At this point press Send (Green Phone). Warning this will erase all information, contacts etc. However data on the SD card will not be erased.
if the touchscreen is still not working, try to stick a softcard (business card) between the screen and the front panel because sometimes somthing like dust or dirt is puting pressure on the screen, or maybe you droped the phone and the front panel been twisted (even a little bit) and now it is pressing the screen.
if the touchscreen is still not working, try to flash a new rom to the phone by downloading it from here: ftp://ftp.xda-developers.com/Prophet/Shipped_Complete_Updates/
if all the above is not making the touchscreen to work, so probably it is a hardware problem, and you need to send it to repair.
@shayd
hi.. i am trying to make a hard reset on my S200 folowing your instructions (pressing camera button+comm manager button and reset), i have wated 2 or 3 minutes but nothing happened.. i think th battery is not well charged.. is it because of that ? or there's another way to do the hard reset ??
Best Regards.
From the Wiki(link at the top of the page):
To Hard Reset device. Warning this will erase all information, contacts etc. However data on the SD card will not be erased. Hold down camera button, comm manager button and reset the device keep holding the buttons down until you get the following message on the screen: "Press Send to restore factory default." At this point press Send (Green Phone)
hard reset on S200
equinoks said:
@shayd
hi.. i am trying to make a hard reset on my S200 folowing your instructions (pressing camera button+comm manager button and reset), i have wated 2 or 3 minutes but nothing happened.. i think th battery is not well charged.. is it because of that ? or there's another way to do the hard reset ??
Best Regards.
Click to expand...
Click to collapse
Hold down camera button, comm manager button and reset the device. release the reset button but keep holding the camera button and comm manager button down until you get the following message on the screen: "Press Send to restore factory default." At this point press Send (Green Phone)
Hi all
my device has become stuck and wont accept any screen inputs, but it will let me access some functions via the standard buttons. I think I need to perform a hard reset.
I have tried doing this by ressing power and soft reset but it doesn't seem to work.
As I dont have my booklet here I dont know if there's something else I should be doing.....
any advice at all please?
Thx
Press and hold both soft-key buttons, stick the stylus in the reset hole, release reset and wait for bootup to begin before releasing the soft-key buttons.
As I recall you get a confirmation screen.
Soft keys being the 2 hard keys above the ok and windows keys.
some random reason mine dosen't work
it will work.... use any solid PIN / Needle while prss n hold soft keys... mine worked
Hello Everyone,
Last night I've activated the password function to my mobile phone but the strange thing is i couldn't open my phone with the same password on Windows Mobile.
I thought that it could be fixed by re-installing the ROM but couldn't suceed because of ActiveSync connection.
Can anyone help me about this issue please? How could I deactivate the password?
P.S: I'm using WM6 on my Dopod 838
could you be a little more specific about the problem? you dont have to use activesync to upgrade your rom. just put your phone into bl mode and go from there. that WILL clear the password as long as your updating the ce rom. or just do a hard reset
would formatting the storage/chipondisk not clear any password setting on the device ?
I think i have a quite silly situation, this is the normal Windows CE Password which we use usually and activates itself when we turn on the phone or some minutes later after we didn't use it.
I thought the same but i need to open my phone with password for cleaning storage. Actually i don't know how to hard reset this phone, i only was using "Storage Clear" application for erasing whole thing.
For installing new rom, I need to make CID unlock and the phone does not run the application without having the ActiveSync connection (guest connection) with phone.
Hard reset: Hold both software "---" keys on the keyboard and reset with stylus. Then hit "0" key to hard reset or "X" key to cancel.
Bootloader mode: Hold light and power buttons together and reset with stylus. (The light button is on the front edge of the phone, near the volume slider). In bootloader mode please keep in mind that the backlight is turned off, therefore the screen is hard to read in poor light.
How can I hard reset Polaris?
Press and hold the Explorer and GPS button (under the phone buttons), and press reset with sylus!
Or use Clear Storage in Setting System.
Problem
Hi, My polaris is crazy, I notice some problems in the way the system is working, contact problems, weather home plugin, always trying to get information, problems with instaling programs, and now I can not enter in bootloader or make a hard reset, when I try it I see the tri color screen but disaper in less a second.
Any idea?
thanks
Did you ever read the manual that came by your device.
They have a troubleshooting section too.
You could also give more specific info on :
- contact problems
- weather home plugin
- always trying to get information
- problems with instaling programs
That would really help us to figure out if you are the one that are doing things not the right way or if it is your device that malfunctions.
PS: don't feel attacked by this post, it's only for making you understand that when you provide little info, we can't really help on the problem.
solved
Problem solved guys,
Don´t fell atacked I undersyand you,
Yes the device was not working good, so I make a Hard Reset, and now everything is ok.
Thanks
Resets Not working
I cannot do a Soft Reset or a Hard Reset on the HTC Touch Cruise (Polaris)
Individually,
Pressing the camera key on the right side does not work, throws an error message - Unable to initialize Camera. Failed to set up the camera device
When I use the Stylus to do a Soft Reset, nothing happens.
Pressing Messaging/GPS + Internet buttons and Soft Rest = No Result.
Any other ways to do a soft/hard reset? Is clear storage ok to do a hard reset, and with a cooked ROM. Thanks for the answer
sraaj, the same problem for me. Did you solve the problem?
Thanks!!! Press and hold the Explorer and GPS button (under the phone buttons), and at the same time press reset with the pen worked perfectly for me. I recovered the phone after I broke it when installing a game.
Thanks,I can hard reset naw
Hi,
I have changed the registry key to change the default keyboard input.
HKEY_CURRENT_USER\ControlPanel\Sip
After changing the registry key, I have restarted my mobile but it does not get start properly. It just shows the starting screen (only shows "Windows mobile" on screen). Please help me to solve the problem.
Mobile details :- HTC P3450
OS :- Windows moble 6.1
Thanks in advance,
Milind
looks like you need to hard-reset your device.
Please let me know how to hard reset the device.
-Milind
http://wiki.xda-developers.com/index.php?pagename=Elf_Resets
That's guessing you have an Elf HTC P3450 if not the WIKI will hold the info
Not Working.
Even after resetting it just shows the "Windows Mobile" on screen.
Is there any other way to edit the registry entry.
No way to change registry without being in operating system, my next advise is to go to the WIKI i linked and find your stock ROM and flash.
After a hard reset (soft reset won't solve your issue) it will sit at the Windows Mobile screen for a while as it initializes the system for the first time, so wait 15 or so minutes, and it should get around to setting up your stylus and such.
Hi, this happend to me once screwing around with sip, to get block recognizer back in wm6.5, and the all thing freezed just like you. So do operate hard reset and be patient it will end up telling you you really messed up but will start from scratch after a while.
hcall,trowakage
After hard reset I have Kept the device on for whole night but still it shows the "Windows mobile" on screen.
stylez,
It is not possible to connect the phone to PC through active sync, so it is not possible to flush the ROM.
-Milind.
weird, I suppose you tried pulling out the battery and putting it back on? what keys do you press to hard reset? do you get a message saying you will loose all your data press action to continue?
Can you enter hardspl at all? if so you can flash your rom
To perform a hard reset
1.Press and hold the TALK and END buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.2.Release the stylus, but continue pressing the TALK and END buttons until you see the following message on the screen:This operation will delete all your personal data, and reset all settings to manufacturer default. Press Action to restore manufacturer default, or press other keys to cancel.
3.Release the TALK and END buttons, and then press ENTER on your device.
good luck
hcall,
I have tried it in the same way which you have mentioned.
In the same way shown in video
But unfortunately it doesn't show any message (hard reset might work after booting OS completely & in my case it is not possible, it just shows "Windows Mobile").
can you boot on hard spl at all?
hcall,
no.
power off...
press power button while the volume key is pressed down... that way you'll enter the tri-color boot screen... connect it to your computer and flash a good rom.
TheRem,
Not working.
Is there another way to reinstall OS.
-Milind
It seems there is no solution for this problem.
-Milind
bring it to the nearest HTC service center in your country.
Fiquei com a mesma dúvida.
A minha situação actual tem transcoding
Sent from my GT-I9100G using Tapatalk 2