Hi, I've the MDA Pro and used it for a year with an i-mate rom. Yesterday I tried to upgrade the phone to WM6 with Windows Vista. After I clicked 'upgrade' I got ERROR 101 - Connection error.
Now I'm trying with Windows XP but I'm still getting the connection error. The MDA is in boot(?) mode, with Serial or USB in top and 1.00 at the bottom of te screen.
Anyone with an idea?
Wtf! Just 1 usb port on my Windows XP pc doesn't work. Well, problem solved.
Related
If I disconnect my i-mate jam from the pc, and reconnect it again, Activesync shows me, that the i-mate is still disconnected. For the pc to see the jam again, i have to restart the pc.
Pc is running under win xp with the latest updates.
Has anyone a solution for this?
Hi
Please forgive an OT posting from a newbie on this forum, but I have tried elsewhere with no results.
I have inherited an old iPAQ 3630 that I want to get going but am well stuck with the following problem.
New installation of XP Pro + SP2 from original media on modern P4 with motherboard BIOS at latest rev. All ports work OK with other devices.
Firewall OFF.
New installation of Outlook 2003.
No other software installed (e.g. AV).
Soft reset iPAQ.
Install ActiveSync 3.8 as Local Administrator.
At the Get Connected screen insert iPAQ into USB cradle, turn on and plug into USB port on the back of the computer.
Plug and Play does its thing and iPAQ appears correctly in Device Manager.
iPAQ briefly displays Connecting to Host.
On the host Get Connected screen disappears and ActiveSync icon appears in System Tray.
Open ActiveSync on host and the green thing rotates; ActiveSync says Connecting - forever.
The ActiveSync never connects to the iPAQ. Never get to set up a Partnership.
Tried two other computers, Windows 2000, Outlook 2000, ActiveSync 4.0, Serial Connection. Same problem.
Tried hard reset of the iPAQ.
I have never seen this iPAQ connected. I was assured it worked. It has had an upgrade to PPC 2002 at some time in its life.
I have tried a couple of other forums but just get responses stating the obvious. So I thought I'd try the real experts.
Any ideas please guys?
zcx
I have the latest Windows Vista Mobile Device Center installed (the new actviesync replacment) It was working great with my new Treo 750 for a few days. For some reason I can no longer establish a USB connection. Instead of the normal postive sounds (boo beep) you hear three (boo boo boo) when you plug it in. Also, why do you have to push the button on the USB cable before it does anything? My previous non Palm Windows Mobile devices didnt have that.
boo = low tone
beep = high tone
So again, no more boo beep, only a very quick boo-boo-boo. I still get the BEE boo when I unplug it or the phone shuts back off though. Shoot what heck is wrong? My ipaq 6900 had no issues on the same computer for many months.
I tried reinstalling Mobile Device Center
I tried a new USB port
I tried softresetting the Treo
What else should I check out before I try a hard reset?
Does anyone else have connection issues?
The connection issue sucks, because now I cant use PDANet for my USB internet connection as well.
Any advice?
I uninstalled PDANet from both windows vista and the treo
I uninstalled windows mobile device center (and the driver update) via control panel, pograms, remove
I rebooted windows vista (32 bit by the way)
I reinstalled windows mobile device center
I plugged in my treo 750, hit the button on the cord, boo BEEP
"USB Device Not Recognized One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message"
Ok, so my next task will be to test this on another Vista machine to rule out if it's the phone or windows that has the problem. :-/
I've got same problem, but I never sync treo with pc completly error is (Server is bussy) code 0x80072EFF
pc see my treo but don't sync contacts anything.
I was reinstall wmdc and make hard reset on treo ... it's terrible .. maybee wm6 will help.
media sync problems
I have no problems with WMDC using USB and Bluetooth. Sometimes I get an error but I just hit Sync and it syncs up.
I'm having problems when syncing media. The Treo disconnects after a few songs are synced so I have to remove the cable then plug it in again many times before a sync is complete.
Have you tried checking if WMDC is allowed through Windows Firewall?
S4czech,
Can you give a try for the tip described below :
http://forum.xda-developers.com/showthread.php?t=304131&page=3&highlight=wmdc+sync+problem
Thanks for your reply.
Hi,
I've got same problem till now, until I tried new WMDC 6.1 (in czech as well)
http://www.microsoft.com/downloads/...FamilyID=46f72df1-e46a-4a5f-a791-09f07aaa1914
It was solved my problem with sync with error "Server is busy".
now I wait for Windows Mobile 6 Profesional
I'm having problems connecting my Zinc II via USB to my laptop.
My Zinc is running a custom 6.1 ROM by I-Mono-I version "20771" and the ROM version is "Zinc II VER 010 WWE 230 0825"
I can connect it to the family PC that is running Windows Vista no problem, however when I try to connect it to my laptop running Windows 7 it won't connect. Both PC's are using Windows Mobile Device Centre and my laptop is running version 6.1.6965 and Windows update does not show any updates for it.
When plugged in to Vista it shows up in the device manager as "Zinc II" under "Portable Devices" but on Windows 7 it shows up as "Microsoft Window Remote Adaptor" under "Network adapters"
I have tried rebooting both devices and uninstalling and reinstalling Windows Mobile Device Centre multiple times.
One last thing, the option "USB Advanced Network Functionality" does not appear in settings so I can't enable/disable it.
Does anyone know how to fix this?
Also is there a way to get back "USB Advanced Network Functionality" on my phone or any software that will act as a replacement??
bump, anyone have any ideas?
I'm really having problems with this
Hi,
I've upgraded my BA with WM 6.5.3 release from Sun_Dream. And since I used Windows Vista in my notebook, I was following the walkthrough from the Wiki, which said that I have to update my WMDC driver so that the upgrade could work.
And voila, my BA now have WM 6.5 installed. It works perfectly until I tried to connect my BA to my notebook using WMDC. My notebook detects the device, but the WMDC doesn't seem to care about it. It shows that the device is connected, but that's all. I can't synchronize my data between my notebook and my BA.
What's wrong with them? Did I do something wrong? Is it just a bug from the release? Is something's wrong with my notebook's WMDC?
FYI, I've tried to reinstall my WMDC, and nothing's happen. My BA is still unable to connect.
Any help please?
Hi there, i had this issue with my tp2, i had to hreset to fix it