I cant count the number of times I have read the new release about HTC supporting BB Connect on the S710...but i just got mine and no sign...
Tried the BB Connect that works on my Dash but not luck...PIN Pending.
RD
Whenever I hit "register now" it just goes to the homescreen really wanna get this working....
Same problem
Ciao.
I'm from Italy and I have same problem. No way to get BB Connect work on my HTC S710.
I can't find the PIN to activate it. Infact when I install the BB the phone try to connect but don'f find the PIN and stop the connection (as you told back in home page!!).
I tried to contact HTC customer service and they told me that HTC and RIM maybe will support BB Connect just with Carriers (i.e. TIM or VODAFONE in ITaly, ORANGE in France and UK, etc..). But why a lot of peaple can use BB connect with the carriers they wont and me no???? As you can see, also DOPOD ASIA support BBconnect in HTC devices!! So let's try together to find a way !!!
I really believe in this.
Thank you to everybody.
Davide.
I am guessing we are all using the BB Connect client from the s620... I think we need a new client for the S710
We will likely have to wait, just like last time
until it gets released by Dopod. They seem to get the BB Connect clients out first, and I have never seen a BB Connect client that wasn't model specific, so it will have to be a Vox variant to work on the Vox most likely. Start sniffing and asking around on Dopod boards, at least then they will know we are looking....
There will be a BBC client for the vox. This will be bbc v4, watch this space (or the ftp )
doedoe said:
There will be a BBC client for the vox. This will be bbc v4, watch this space (or the ftp )
Click to expand...
Click to collapse
Do you have it?
I am dying for BB Connect too, if it's 4.0 that would be awesome!!! I will ditch my dash when that comes out...
Not yet but I will do soon.
There is a full WM6 version waiting in the wings, lets hope it appears soon.
Here you are
It works great in HTC S710 spanish. Good luck.
http://www.hutch.in/blackberryconnect/bbc4[1].0.0.76.zip
You are my hero! I am trying it out on my dash right now on WM5, then will try wm6...though I may end up getting a vox this week now I can have bb connect!!!!
nmanero said:
It works great in HTC S710 spanish. Good luck.
http://www.hutch.in/blackberryconnect/bbc4[1].0.0.76.zip
Click to expand...
Click to collapse
well, maybe you´ll try cortado
it works with active sync fantastic on my s710
www.cortado.com (or .de; .co.uk and so on...)
sting0r said:
You are my hero! I am trying it out on my dash right now on WM5, then will try wm6...though I may end up getting a vox this week now I can have bb connect!!!!
Click to expand...
Click to collapse
I have downloaded, the bb connect and notice that it is meant for the windows 5 platform. Although it works on the dash, i dunno whether it will work on the vox as the vox is wm 6. This is my observation from having the hermes where if the hermes is flasg to wm6 the BB connect 4 meant for WM5 doesnot work unless there is some ehex editing on the device to make it look like WM6. Any useH anybody git it to connect on the vox yet.
i am also about to rush out and buy the Vox and just want to confirm this detail before doing so, any body tried it yet?
Just got the stuff,its a dopod C500 and i can safely say that it is working and receiving email. Thank you and apology for doubting the earlier post. All i can say is yippee
I read the XML in the cab, and it says this will work for all WM 5.x versions
This applies to Windows Mobile 5 and Windows Mobile 6 (internal version is 5.2). So, I know this works on my Vox(Win Mobile 6), as I am downloading emails just fine with it now, but does it work on the Dash/S620, etc as well? If it does, what versions does it work on? Just Windows Mobile 6, or also Windows Mobile 5? It should work on both. Now the next question, does it work on other devices like the Samsung BlackJack(Windows Mobile 5)? This would make this the closest we have seen to a universal Blackberry Connect client! One can hope, right?
work fine also in italy by tim
is the best many thanks tp DAVIDE......
It doesn't work on Samsung i600. There is an error when installing.
I may soond noob for this one ... but
WTF is BBConnect ???
blackberry connect
What's the point of using a blackberry app on a HTC smartphone???
KevinSephiroth said:
What's the point of using a blackberry app on a HTC smartphone???
Click to expand...
Click to collapse
I use it on HTC on S710 whith French Orange operator
it work fine
Related
anyone been able to successfully, and possibly flawlessly change the bt stack on there magician? i just spent around 6 hours trying to change mine over, first to widcomm 1.4 and then 1.6 as well as the broadcom stack, nothing.. kept giving me the memory error and asking to restart.
better Bluetooth stack
hi, if you want to replace Bluetooth stack try this one:
http://forum.xda-developers.com/viewtopic.php?t=18537
there is an easy guide how to do it, and where to get it.
thanks, checking it out now.
tried with my O2 Xda II mini
but still failed to listen to MP3 using bluetooth :-(
Hi All,
Unlike the T-Mobile MDA Compact, does the Vodafone VPA Compact a Widcomm BT stack? Anybody tried?
[url]http://www.plawa.com/support/...800bt_kompatibilitaet_treiberzuordnung_de.pdf
[/url]
---
Hersteller Status Betriebssystem/Bluetooth
T-Mobile
MDA Compact
Windows Mobile 2003™ 4.21.1088 (Build 14235.2.0.0),
Microsoft Bluetooth stack
Vodafone
VPA compact
Windows Mobile 2003™ SE 4.21.1088 (Build 14132)
Widcomm BT-PPC/PE Version 1.0.0 Build 1900
Greetings Ben...
So if this information is correct we need a VPA Compact rom. Anyone?
Ok, well if that .pdf file is correct, harrah! However, Expansys have listed the VPA Compact as a discontinued item. I can't find a single store that sells it, so maybe it's over before it began!!
After a quick search there is no ROM is availabe over the internet. The hope is the dumping. But my knowledge is this phone is sold only in Germany. Not sure!!!!
hbahaie said:
After a quick search there is no ROM is availabe over the internet. The hope is the dumping. But my knowledge is this phone is sold only in Germany. Not sure!!!!
Click to expand...
Click to collapse
Thanx to Google:
http://download.vodafone.de/spopup16.html
It is a German ROM 1.12, coming from Vodadafone.
Greetings Ben...
OK, well does anyone have the ability to extract the stack and find out whether it's widcomm or MS? I certainly don't!
I've done a google translate of this page and it doesn't mention anywhere about which phone it's for. I'm guessing you selected this on the previous page?
And what's with the constant reference to blackberry? Has vodafone acquired blackberry software now?
Makes me want to just install the rom and find out, but I can't read much german!
jimmy-bish said:
OK, well does anyone have the ability to extract the stack and find out whether it's widcomm or MS? I certainly don't!
I've done a google translate of this page and it doesn't mention anywhere about which phone it's for. I'm guessing you selected this on the previous page?
And what's with the constant reference to blackberry? Has vodafone acquired blackberry software now?
Makes me want to just install the rom and find out, but I can't read much german!
Click to expand...
Click to collapse
http://download.vodafone.de/
Upgrades for handheld
The link to Blackberry is that exchange between VDA Compact & Blackbeery needs the VDA Compact rom 1.12 upgrade.
http://download.vodafone.de/index_l3_2d.html
http://download.vodafone.de/index_l3_2d.html#vpacompact
Then you see the license agreement page.
Greetings Ben...
Hey i upgraded stack to bluesoile, how do i downgrade back to original stack? i backuped deleted registry keys?
Dakky said:
Hey i upgraded stack to bluesoile, how do i downgrade back to original stack? i backuped deleted registry keys?
Click to expand...
Click to collapse
You're better off posting that one in the bluesoile thread, dude. You'll get more help there.
Berkens.. Ok cool, so it is the rom.. (just worked out you need to click on the link that says "heir" to see the ROM), but how do we find out which bits we need? Can Buzz or anyone with ROM experience tell me whether there's any substance to this?
Hi,
I updated my T-Mobile MDAc with this and it's similar to the T-Mobile update, no new BT-Stack, just Vodafone branding
Bugger! Oh well, got our hopes up for a bit!
sack said:
Hi,
I updated my T-Mobile MDAc with this and it's similar to the T-Mobile update, no new BT-Stack, just Vodafone branding
Click to expand...
Click to collapse
How would one be able to tell if it is the MS stack or Widcomm one?
I've not seen the Widcomm stack running on a PPC yet- so wouldn't know.
I'm sure like most here, the interest is whether you can get the A2DP profile setup on the MDAc.
I'm sure this is 'easily' possible- just need some with the know how i guess...
EDIT: Just noticed the BT Stack for the VPAc is exactly the same as for MDAIII- so is this a mistake regarding the VPAc stack running Widcomm. Or is the difficulty in uninstalling the MS BT?
Does anyone know or heard if there are any plans to release a Blackberry client for the new Windows Mobile 2005 devices?
Yes, the client is being tested by various operators such as O2 and T-Mobile. If and when the operators decide that it will be or remain a viable business solution, they might release it in the next rom upgrade.
Remember however that operators might just decide to drop BB Connect in favour of Exchange push, that also shoul be available shortly.
To reassure you, I *did* see a working demo copy on a Universal type device. I also am in eager anticipation.
I wasnt able to work with Nicetrack and found that the link to their site is dead.
Is there any other software that works similarly to nicetrack on WM6.
Im on nfrazz62a ROM.with Radio ROM 02.47.11
maybe you can fill us in on exactly what nicetrack does, because this is the first time ive seen or heard of it and maybe for others as well.
Hi mdajunkie,
Its a software which gives us the information about the signal strength in dBm.
well I know you asked for something similar and the only thing that I could think of that has something similar or close to what you might need is batterystatus. That gives you a percentage on how strong your signal is, also does a few other very useful tricks. I wish I could leave you with a link or something to download and try but unfortunately im not at home, otherwise I post it for you. hate to say it but use the search for batterystatus or hopefully someone else has some better input than I could give.
Here is batterystatus
Hi Binder
Thanks for the link.....
And thankyou mdajunkie for the info...
I will try this out and will post back.
Emm,
Nothin upto Nice track.
That was really perfect !
You can download nice track still
I downloaded nice track 8/14 here. I agree that nothing matched nicetrack for maintaining a database of signal strength, cell towers, and even locations when it is hooked up with GPS. However, I have met nothing but failure in trying to get it to work on WM6 - It needs to know the COM port for GSM, and none of the available ones work - either no signal, or it locks the application. Because I really need it in the current cell-strength purgatory I find myself, I might be going back to WM5 if I can't bumble my way through it.
The author released the source code (waaaay beyond my skills) at the same website.
PLEASE let me know if anyone gets it working on WM6. I am currently running Jaguar2 on a wizard.
THANKS.
Please, could anyone send me a copy of the Nicetrack 1.6 sources (binaries would be fine too but I need the source) ?The website is down...
At the moment the site is up to work
Look http://www.nicecuppa.net/
Anyone has any news? I need of a Nicetrack for HTC Touch Pro. Or exist the similar software ?
+ 1
but NiceTrack.exe didnt see Cell ID's on my Qtek S100 wm2003..
iRiKi said:
+ 1
but NiceTrack.exe didnt see Cell ID's on my Qtek S100 wm2003..
Click to expand...
Click to collapse
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
KonikBujany said:
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
Click to expand...
Click to collapse
I tried from my HTC Touch Pro and does not work. The software has a lower resolution and can not read anything.
Any ideea ? Thank you very much
Hi guys. Has anyone found a working version yet?
Cheers
KonikBujany said:
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
Click to expand...
Click to collapse
YES! it is working on my Qtek S100 with wm2003se !!! very nice m8
BUT i can't get it to work with wm6.1 well, the 2008 versions that site actually *WORK* (you can see the cells already being detected) but it has a small resolution. Versions from 2006 have correct resolution, but don't work at all. I'll try contacting the developer, as i don't have any coding skills whatsoever
PS: i tried the batterystatus today plug-in from previous page, but it reveals to be a huge battery hog (at least for me). the constant refreshing of data probably is to blame.
KonikBujany said:
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
Click to expand...
Click to collapse
Do you know how to contact the author? Maybe he is registered to xda...
I have a motorola q9h smartphone and nicetrack doesn't start because of an useless error i've already seen that is related to the smartphone/ppc little differences... If i could look at his source code....
well i tried emailing him, but the form on his site doesnt work.
also, for wm6.1 i now use rk-Location Switch, while nicetrack continues to work flawlessly in wm2003
iRiKi,
1 i now use rk-Location Switch
What program is that ?
http://forum.xda-developers.com/showthread.php?t=328114
i have an HTC Touch Pro and i would like to know if there is a program(or a way) to enable BlackBerry on my Touch Pro if possible. What kind of a program should i use....if there is such a thing. thanks!
you need BBconnect which I think a few people have managed to get working...there is a thread somewhere
I do have the TP (ROM 1.90.871.3 - Singapore, SingTel) and installed Blackberry Connect (version 103). No problem at all. I got a PIN within seconds and it works flawlessly. It works even better than on my Hermes which I had before. No need to do any Registry hacking or whatsoever.
BUT: I would advise to use the Blackberry Connect Desktop Software to synchronize the first time.
Yep! Works like a charm on the Touch Pro. No modifications required - as long as you have the blackberry service enabled of course?
Software and installation files available here (version 101 works fine too by the way)
http://www.sems.org/entry.asp?ENTRY_ID=276
Good luck.....
.
If you have been using the live mesh technical preview, the mobile client for wm6 is now available. Just sign in as normal and then add device.
I'm still seeing "Coming soon for mobile" The limited Mac tech preview shows up, though.
Bushrod said:
I'm still seeing "Coming soon for mobile" The limited Mac tech preview shows up, though.
Click to expand...
Click to collapse
I signed in and out of live mesh and it appeared.
Must not have replicated to the servers I hit yet. I'll keep an eye out. Thanks for the heads-up!
I really like live mesh, (for me at least), it just works out of the box.
Hi !
Is there someone that can post the cab ?
Thanks !
Whatever !
I found it :
http://m.mesh.com/install/wm6/LiveMesh.cab
But it doesn't connect to the mesh : "only available to a limited number of users"
Arrgh this is annoying, Ive been using Mesh for a while and now its comming up with for U.S only wtf?
DMAND said:
Arrgh this is annoying, Ive been using Mesh for a while and now its comming up with for U.S only wtf?
Click to expand...
Click to collapse
It says US and UK on the Live Mesh blog. I am however having trouble at the point where it's trying to add the device, possibly because I'm on GPRS at the moment and it might be timing out, I guess.
SQL CE error
When I try to install I get this error message....
"Live Mesh was unable to find a suitable version of SQL CE on this device. Unable to install Live Mesh."
I've tried to install SQL, i downloaded it from microsoft directly, and its listed as "SQLServerCompact 3.5 Core" under Remove Programs....
Any ideas??? I really want to use this....
Yes, it's only for US and UK
I installed the mesh cab, and using an "US" account (a french one, but with my country changed to US ) it WORKS ! And works well. I have now a "cabstore" synced with my own server, live mesh and my TyTN II.
Great service !
Got it last night, works great with my XV6800.
supercluver said:
When I try to install I get this error message....
"Live Mesh was unable to find a suitable version of SQL CE on this device. Unable to install Live Mesh."
I've tried to install SQL, i downloaded it from microsoft directly, and its listed as "SQLServerCompact 3.5 Core" under Remove Programs....
Any ideas??? I really want to use this....
Click to expand...
Click to collapse
I've got this exact same problem. I posted over on the Microsoft Mesh forum and am waiting for a conclusive answer. It's been passed over to the Mobile Dev team apparently.
http://social.microsoft.com/Forums/en/LiveMesh/thread/8e80d590-9c88-4522-bdab-3d23bea718c0
I wonder if it's got anything to do with cooked roms? I'm running CRC WM 6.1 v13.0 on my Hermes.
--Update--
Apparently there is an issue with cooked ROMs as they don't all include SQL. Installing SQL seperately will not help unless you use a version lower the 3.5 but even that has not been proven yet.
I'm going to try and find an older version of SQL and give it a bash.
Further information here:
http://social.microsoft.com/Forums/en-US/LiveMeshMobile/thread/b8a6da09-c53a-4168-91bf-f476d2a1876f
Firstly I am in the UK Ive downloaded the updated cab and now everytime I run it it gets past verifying user and then gets stuck on Getting mobile phone identifier and then fails
SQL CE Issue has been identified and resolved
The client needs SQL CE 3.1 installed, and does not work with SQL CE 3.5 installed.
Read and follow information in forum:
http://social.microsoft.com/Forums/en-US/LiveMeshMobile/thread/b8a6da09-c53a-4168-91bf-f476d2a1876f/
All working well after applying Jef K's fix over on the Mesh Forum.
Problem now is that the MEsh Client can't acquire my device ID to register the phone onto my mesh.
Issue being delt with over at http://social.microsoft.com/Forums/en-US/LiveMeshMobile/thread/c7ce844c-a4e3-4be4-838d-1ebdca5986e7
I downloaded the cab but says that I cannot do it because only a limited number of users can right now. How sad...
Does remote desktop work like the desktop version?
courtlandre said:
Does remote desktop work like the desktop version?
Click to expand...
Click to collapse
No
You cannot remote desktop to the phone (shame)
Limited Users
Limited Users, anyone else got the same problem?
cheeers Tom
I use mesh for a back up right now and it works great for my home computers. Some things that bugged me are:
No remote desktop.
It will only sync your remote directories to the main memory. I tried to sync my work folder and it didn't place it in the storage card.
It launches external applications to view the mesh folders (Pocket IE) and the file explorer to view local folders.
All in all, a nice first attempt. Build in remote desktop and I would PAY for a service like this!
@Networkguy: it's still the first beta... keep waiting
Unfortunately i can't find a today plugin. This is sad. Anyone has an idea?