Database Info

All about Dopod D600

Since there is no particular section I thought of submitting the information here.Pls feel free to add.
Apart from specs some important information
-Code name is GENE 100
-No Wi-Fi
-AKU 3.2
-Looks like use G3 chip.Boot loader mode shows IBL(no IPL)/SPL 1.01.000
-aWizard can extract Extended ROM, but no other part.It can also extract the .rgu file,which I guess is not complete cos its size is around 25kb.
-It is very much light weighted and uses the same Wizard battery.
-Hv not yet tried to back up ROM using other tools.

A2DP on Dopod D600
I am using this for last 1 month.
Works great. Have light weight, battery power good etc. But have a typical problem. I am also using Sony 970 bluetooth stereo. This D600 dopod says it supports A2DP out of box. I am able to pair this with Sony 970 and it recognizes wireless stereo profile correctly. No problems. But while playback the sound is played back in MONO ONLY. But there is no shutterig sound etc. I installed Zoki A2DP patch on this PPC, rebooted paired again and sound from bluetoth is received in STEREO. But then starts typical A2DP problem i.e. staggering sound, lip sync problems etc. The famous registry hacks to solve this works. But what is this? Has anybody encountered the same problem? Why the PPC does not work out of box to support A2DP as advertised to support the bluetooth stereo? (Using AKU 3.2)
Any advice is greatly appreciated.

Anant said:
I am using this for last 1 month.
Works great. Have light weight, battery power good etc. But have a typical problem. I am also using Sony 970 bluetooth stereo. This D600 dopod says it supports A2DP out of box. I am able to pair this with Sony 970 and it recognizes wireless stereo profile correctly. No problems. But while playback the sound is played back in MONO ONLY. But there is no shutterig sound etc. I installed Zoki A2DP patch on this PPC, rebooted paired again and sound from bluetoth is received in STEREO. But then starts typical A2DP problem i.e. staggering sound, lip sync problems etc. The famous registry hacks to solve this works. But what is this? Has anybody encountered the same problem? Why the PPC does not work out of box to support A2DP as advertised to support the bluetooth stereo? (Using AKU 3.2)
Any advice is greatly appreciated.
Click to expand...
Click to collapse
hi!
can you register on the dopodasia site and download any wwe firmware for dopod d600?
and upload to rapidshare or xda's ftp?

Dopod D600
Yes I have already registered But there is no download available at this point of time. Whenever it is available I will certainly download it and post a link at rapidshare for all of us.

Wait for some time..we will surely have the ROM

guys, it's a very good news!

need English rom !!
Hi All....
I need this English rom Who have it ?? Help plz.....

Guys with wwe Dopod D600
Can you dump the firmware?
download the file TestDump, extract, copy to your device and run
write 60 Mb and press OK
and upload this dump.bin to rapidshare

Doesn't work..even get dumped...can"t make it flashable...so wait for the official release of ROM which will b soon

work whery well
I can make dump
I have dump russian version but I need Eng !!!
Heellppp

we need wwe dump
we have rus dump

any news about wwe firmware or dump?

any news? we need wwe rom or dump!
plz make dump for us!

WWE Rom
I've dumped my HTC P3400 with the following ROM versions:
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.71.90
OS 1.7.0.0
Hope it's useful.
http://ktuluviathan.googlepages.com/HTC_Gene_WWE.part01.rar
http://ktuluviathan.googlepages.com/HTC_Gene_WWE.part02.rar
http://ktuluviathan.googlepages.com/HTC_Gene_WWE.part03.rar
http://ktuluviathan.googlepages.com/HTC_Gene_WWE.part04.rar
http://ktuluviathan.googlepages.com/HTC_Gene_WWE.part05.rar
http://ktuluviathan.googlepages.com/HTC_Gene_WWE.part06.rar
PS: Sorry for the multiple files. I'm behind a proxy with payload limit.

WOW!!!!!
Thank you man!
It's wonderfull!!!!!

wonderful what ? can't unlock the super cid, can't flash into D600 DESIGN FOR CHINA ,GOD .
ANYNEWS ABOUT THE d600 wm6.0 rom?
thanks for share.

It was not the ROM to flash
it was just dump

Hope, this will help you to build WM6 for Dopod 600.

WM6 for D600
Any update Syrop ?

not yet
can't dump anything from dump file
something wrong
still working

Where is BB Connect

I cant count the number of times I have read the new release about HTC supporting BB Connect on the S710...but i just got mine and no sign...
Tried the BB Connect that works on my Dash but not luck...PIN Pending.
RD

Whenever I hit "register now" it just goes to the homescreen really wanna get this working....

Same problem
Ciao.
I'm from Italy and I have same problem. No way to get BB Connect work on my HTC S710.
I can't find the PIN to activate it. Infact when I install the BB the phone try to connect but don'f find the PIN and stop the connection (as you told back in home page!!).
I tried to contact HTC customer service and they told me that HTC and RIM maybe will support BB Connect just with Carriers (i.e. TIM or VODAFONE in ITaly, ORANGE in France and UK, etc..). But why a lot of peaple can use BB connect with the carriers they wont and me no???? As you can see, also DOPOD ASIA support BBconnect in HTC devices!! So let's try together to find a way !!!
I really believe in this.
Thank you to everybody.
Davide.

I am guessing we are all using the BB Connect client from the s620... I think we need a new client for the S710

We will likely have to wait, just like last time
until it gets released by Dopod. They seem to get the BB Connect clients out first, and I have never seen a BB Connect client that wasn't model specific, so it will have to be a Vox variant to work on the Vox most likely. Start sniffing and asking around on Dopod boards, at least then they will know we are looking....

There will be a BBC client for the vox. This will be bbc v4, watch this space (or the ftp )

doedoe said:
There will be a BBC client for the vox. This will be bbc v4, watch this space (or the ftp )
Click to expand...
Click to collapse
Do you have it?

I am dying for BB Connect too, if it's 4.0 that would be awesome!!! I will ditch my dash when that comes out...

Not yet but I will do soon.
There is a full WM6 version waiting in the wings, lets hope it appears soon.

Here you are
It works great in HTC S710 spanish. Good luck.
http://www.hutch.in/blackberryconnect/bbc4[1].0.0.76.zip

You are my hero! I am trying it out on my dash right now on WM5, then will try wm6...though I may end up getting a vox this week now I can have bb connect!!!!
nmanero said:
It works great in HTC S710 spanish. Good luck.
http://www.hutch.in/blackberryconnect/bbc4[1].0.0.76.zip
Click to expand...
Click to collapse

well, maybe you´ll try cortado
it works with active sync fantastic on my s710
www.cortado.com (or .de; .co.uk and so on...)

sting0r said:
You are my hero! I am trying it out on my dash right now on WM5, then will try wm6...though I may end up getting a vox this week now I can have bb connect!!!!
Click to expand...
Click to collapse
I have downloaded, the bb connect and notice that it is meant for the windows 5 platform. Although it works on the dash, i dunno whether it will work on the vox as the vox is wm 6. This is my observation from having the hermes where if the hermes is flasg to wm6 the BB connect 4 meant for WM5 doesnot work unless there is some ehex editing on the device to make it look like WM6. Any useH anybody git it to connect on the vox yet.
i am also about to rush out and buy the Vox and just want to confirm this detail before doing so, any body tried it yet?
Just got the stuff,its a dopod C500 and i can safely say that it is working and receiving email. Thank you and apology for doubting the earlier post. All i can say is yippee

I read the XML in the cab, and it says this will work for all WM 5.x versions
This applies to Windows Mobile 5 and Windows Mobile 6 (internal version is 5.2). So, I know this works on my Vox(Win Mobile 6), as I am downloading emails just fine with it now, but does it work on the Dash/S620, etc as well? If it does, what versions does it work on? Just Windows Mobile 6, or also Windows Mobile 5? It should work on both. Now the next question, does it work on other devices like the Samsung BlackJack(Windows Mobile 5)? This would make this the closest we have seen to a universal Blackberry Connect client! One can hope, right?

work fine also in italy by tim
is the best many thanks tp DAVIDE......

It doesn't work on Samsung i600. There is an error when installing.

I may soond noob for this one ... but
WTF is BBConnect ???

blackberry connect

What's the point of using a blackberry app on a HTC smartphone???

KevinSephiroth said:
What's the point of using a blackberry app on a HTC smartphone???
Click to expand...
Click to collapse
I use it on HTC on S710 whith French Orange operator
it work fine

Nicetrack for WM 6 ??

I wasnt able to work with Nicetrack and found that the link to their site is dead.
Is there any other software that works similarly to nicetrack on WM6.
Im on nfrazz62a ROM.with Radio ROM 02.47.11

maybe you can fill us in on exactly what nicetrack does, because this is the first time ive seen or heard of it and maybe for others as well.

Hi mdajunkie,
Its a software which gives us the information about the signal strength in dBm.

well I know you asked for something similar and the only thing that I could think of that has something similar or close to what you might need is batterystatus. That gives you a percentage on how strong your signal is, also does a few other very useful tricks. I wish I could leave you with a link or something to download and try but unfortunately im not at home, otherwise I post it for you. hate to say it but use the search for batterystatus or hopefully someone else has some better input than I could give.

Here is batterystatus

Hi Binder
Thanks for the link.....
And thankyou mdajunkie for the info...
I will try this out and will post back.

Emm,
Nothin upto Nice track.
That was really perfect !

You can download nice track still
I downloaded nice track 8/14 here. I agree that nothing matched nicetrack for maintaining a database of signal strength, cell towers, and even locations when it is hooked up with GPS. However, I have met nothing but failure in trying to get it to work on WM6 - It needs to know the COM port for GSM, and none of the available ones work - either no signal, or it locks the application. Because I really need it in the current cell-strength purgatory I find myself, I might be going back to WM5 if I can't bumble my way through it.
The author released the source code (waaaay beyond my skills) at the same website.
PLEASE let me know if anyone gets it working on WM6. I am currently running Jaguar2 on a wizard.
THANKS.

Please, could anyone send me a copy of the Nicetrack 1.6 sources (binaries would be fine too but I need the source) ?The website is down...

At the moment the site is up to work
Look http://www.nicecuppa.net/

Anyone has any news? I need of a Nicetrack for HTC Touch Pro. Or exist the similar software ?

+ 1
but NiceTrack.exe didnt see Cell ID's on my Qtek S100 wm2003..

iRiKi said:
+ 1
but NiceTrack.exe didnt see Cell ID's on my Qtek S100 wm2003..
Click to expand...
Click to collapse
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6

KonikBujany said:
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
Click to expand...
Click to collapse
I tried from my HTC Touch Pro and does not work. The software has a lower resolution and can not read anything.
Any ideea ? Thank you very much

Hi guys. Has anyone found a working version yet?
Cheers

KonikBujany said:
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
Click to expand...
Click to collapse
YES! it is working on my Qtek S100 with wm2003se !!! very nice m8
BUT i can't get it to work with wm6.1 well, the 2008 versions that site actually *WORK* (you can see the cells already being detected) but it has a small resolution. Versions from 2006 have correct resolution, but don't work at all. I'll try contacting the developer, as i don't have any coding skills whatsoever
PS: i tried the batterystatus today plug-in from previous page, but it reveals to be a huge battery hog (at least for me). the constant refreshing of data probably is to blame.

KonikBujany said:
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
Click to expand...
Click to collapse
Do you know how to contact the author? Maybe he is registered to xda...
I have a motorola q9h smartphone and nicetrack doesn't start because of an useless error i've already seen that is related to the smartphone/ppc little differences... If i could look at his source code....

well i tried emailing him, but the form on his site doesnt work.
also, for wm6.1 i now use rk-Location Switch, while nicetrack continues to work flawlessly in wm2003

iRiKi,
1 i now use rk-Location Switch
What program is that ?

http://forum.xda-developers.com/showthread.php?t=328114

About TomTom

Hi,
I am a recent owner of a Touch Cruise, to replace my too big Athena.
On my X7500 I was using TomTom navigator 6 brought by HTC with a one-town demo map, that's why I bought France map on TomTom site.
So, yesterday I bought my Cruise in one of my phone operator's store, which is SFR in France. And my **#[email protected]* operator removed tomtom software because it has its own gps software (monthly costing about 15$).
I would like to find / download / buy only TomTom software, because I already have the map for it, but I don't find anyway o get it !
Even the TomTom software setup cab of my Athena's programs disc does not want to be installed on my Polaris...
May someone tell me how I could get a copy of TomTom executable only ?? (if possible in french)
Thanks by advance,
Waici.
(sorry for my bad english

I´m sorry, but you can´t buy the TomTom Navigator stand alone version. TomTom only sells it with a map package.
But you can install your for your old PDA activated TomTom version on your new Polaris, if half a year has gone after the activation on your old PDA.
Best reagrds
Lars

Seconded..

Thanks for your response, but as I said my Athena's version of TomTom does not want to be installed on the Polaris, saying that my ROM is in a wrong version : I suppose that the HTC TomTom exe installer is restricted to Athena ROMs

waici said:
Thanks for your response, but as I said my Athena's version of TomTom does not want to be installed on the Polaris, saying that my ROM is in a wrong version : I suppose that the HTC TomTom exe installer is restricted to Athena ROMs
Click to expand...
Click to collapse
Your TC is delivered with a CD containing Tomtom sofware.

waici said:
Hi,
So, yesterday I bought my Cruise in one of my phone operator's store, which is SFR in France. And my **#[email protected]* operator removed tomtom software because it has its own gps software (monthly costing about 15$
Thanks by advance,
Waici.
(sorry for my bad english
Click to expand...
Click to collapse
---Alex--- said:
Your TC is delivered with a CD containing Tomtom sofware.
Click to expand...
Click to collapse
I think you guys has some serious misunderstanding.

reyjabs said:
I think you guys has some serious misunderstanding.
Click to expand...
Click to collapse
Well, yes and no.
If the operator removed the the software from the TC, the answer is no.
If the operator removed the CD as well, he removed some dedicated HTC software like backup and GRPS monitor which is on the Tomtom CD, the answer is yes

The good answer is Yes : the operator removed the CD containing TomTom software and Spb software... I only have the ActiveSync CD

Did you see my PM ?

I would like to see this PM also

can you send me too the TomTom Application for the Cruise?

it would be nice to get the pm as well cause im currently looking for it, thanks in advance.

VoIP in Windows Mobile 6.1?

I have been playing around with building some WM 6.1 ROMs and have got VoIP to work using a combination of the drivers that are out there. It isn't perfect as there is still the issue with the audio being routed to the stereo speakers and not the phone speaker (I have a feeling unless HTC get involved then this will never be resolved?). I have also noticed that it is slightly quieter than my current ROM - TNT 1933.
If I use the drivers from TNT 1933 the audio is almost inaudible - certainly unusable - however after some playing around I have got audio that works but is still a bit quiet. The drivers I am using are:
Code:
dnsapi.dll - 23 April 2007, 13:30:54, 5,968 bytes
voipphonecanvas.dll - 23 April 2007, 13:30:54, 134,992 bytes
rtcdll.dll - 31 January 2007, 17:35:00, 1,663,488 bytes
The dnsapi.dll & voipphonecanvas.dll each have a digital signature, whilst the rtcdll.dll doesn't and is obviously older.
Does anyone have any other (newer?) VoIP files I can try?
Thanks
Andy

there is a wm6.1 on the russian forum the guy is saying that voip is fully working. here are the links:
http://3ppc.net/forum/showthread.php?t=5663
http://rapidshare.com/files/92075217/ExtraShip.7z
however, i haven't tried it.

Thanks for the links. I have managed to download the ROM but I can't dump it, any ideas how I can? Plus I can't read Russian so if anyone can translate.....
Cheers
Andy

try online translation

Anyone know how I can dump this ROM?
Cheers
Andy

ADB100 said:
Anyone know how I can dump this ROM?
Cheers
Andy
Click to expand...
Click to collapse
Is it THIS specific ROM that you're having trouble with, or you need help on how to dump a ROM?

hiazle said:
Is it THIS specific ROM that you're having trouble with, or you need help on how to dump a ROM?
Click to expand...
Click to collapse
No, its this specific ROM. I have been using the Hypercore kitchen for a while and previously used Molski's cooking pack. I have no issues cooking ROMs and have in the past dumped ROM's without issue. I know there are issues with WM6.1 ROMs - the imgfs tools seem to take much longer and the CPU on my PC peaks which it didn't before. When I use either Hypercore or Molski's tools to dump the ROM it only takes a few seconds and I only get a handful of files.
If either someone can tell me how to dump this ROM or dump it themselves and post the VoIP drivers, either way that would be good...
Andy

Bump
Any updates on this?

voip over windows mobile
Hi,
I use htc tytn II. Details are as under. Window mobile 6.0
1.56.405.5 rom
08/28/07 rom date
1.27.12.11 radio
22.45.88.074 protocol
I did whatever has been told in this forum being wm6voip.cab and the utility. fring works however inspite of the utility stating that sip over 3g/gsm, it is not working. To find out, i removed the sim and started the machine. Tried to connect through the wifi. It is not working. it states sim not available to make it clear that it is connecting the sim rather than the voip.
Can somebody clarify what is the issue.

Just install fring and be happy! It accepts SIP configuration also!

VoIP with SGH I637 WM6.1
Hello:
I have a smartphone Samsung SGH I637 with windows mobile 6.1 , I already tried many cab files , finally I got the VOIP working with my trixbox server , but now I have voice performance problem.
When I call from my smartphone the other party didn't understand what I am saying and in the smarthphone I have very low voice volume.
Do you know somenthing to fix this Issue?
Thanks
Oscar

Hello ocardenas,
Which VoIP cab did you use for your I637? I am trying to make VoIP work on my i637 but without luck
Thanks!

works great
http://forum.xda-developers.com/showthread.php?t=596682 . d