Database Info

All about Dopod D600

Since there is no particular section I thought of submitting the information here.Pls feel free to add.
Apart from specs some important information
-Code name is GENE 100
-No Wi-Fi
-AKU 3.2
-Looks like use G3 chip.Boot loader mode shows IBL(no IPL)/SPL 1.01.000
-aWizard can extract Extended ROM, but no other part.It can also extract the .rgu file,which I guess is not complete cos its size is around 25kb.
-It is very much light weighted and uses the same Wizard battery.
-Hv not yet tried to back up ROM using other tools.

A2DP on Dopod D600
I am using this for last 1 month.
Works great. Have light weight, battery power good etc. But have a typical problem. I am also using Sony 970 bluetooth stereo. This D600 dopod says it supports A2DP out of box. I am able to pair this with Sony 970 and it recognizes wireless stereo profile correctly. No problems. But while playback the sound is played back in MONO ONLY. But there is no shutterig sound etc. I installed Zoki A2DP patch on this PPC, rebooted paired again and sound from bluetoth is received in STEREO. But then starts typical A2DP problem i.e. staggering sound, lip sync problems etc. The famous registry hacks to solve this works. But what is this? Has anybody encountered the same problem? Why the PPC does not work out of box to support A2DP as advertised to support the bluetooth stereo? (Using AKU 3.2)
Any advice is greatly appreciated.

Anant said:
I am using this for last 1 month.
Works great. Have light weight, battery power good etc. But have a typical problem. I am also using Sony 970 bluetooth stereo. This D600 dopod says it supports A2DP out of box. I am able to pair this with Sony 970 and it recognizes wireless stereo profile correctly. No problems. But while playback the sound is played back in MONO ONLY. But there is no shutterig sound etc. I installed Zoki A2DP patch on this PPC, rebooted paired again and sound from bluetoth is received in STEREO. But then starts typical A2DP problem i.e. staggering sound, lip sync problems etc. The famous registry hacks to solve this works. But what is this? Has anybody encountered the same problem? Why the PPC does not work out of box to support A2DP as advertised to support the bluetooth stereo? (Using AKU 3.2)
Any advice is greatly appreciated.
Click to expand...
Click to collapse
hi!
can you register on the dopodasia site and download any wwe firmware for dopod d600?
and upload to rapidshare or xda's ftp?

Dopod D600
Yes I have already registered But there is no download available at this point of time. Whenever it is available I will certainly download it and post a link at rapidshare for all of us.

Wait for some time..we will surely have the ROM

guys, it's a very good news!

need English rom !!
Hi All....
I need this English rom Who have it ?? Help plz.....

Guys with wwe Dopod D600
Can you dump the firmware?
download the file TestDump, extract, copy to your device and run
write 60 Mb and press OK
and upload this dump.bin to rapidshare

Doesn't work..even get dumped...can"t make it flashable...so wait for the official release of ROM which will b soon

work whery well
I can make dump
I have dump russian version but I need Eng !!!
Heellppp

we need wwe dump
we have rus dump

any news about wwe firmware or dump?

any news? we need wwe rom or dump!
plz make dump for us!

WWE Rom
I've dumped my HTC P3400 with the following ROM versions:
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.71.90
OS 1.7.0.0
Hope it's useful.
http://ktuluviathan.googlepages.com/HTC_Gene_WWE.part01.rar
http://ktuluviathan.googlepages.com/HTC_Gene_WWE.part02.rar
http://ktuluviathan.googlepages.com/HTC_Gene_WWE.part03.rar
http://ktuluviathan.googlepages.com/HTC_Gene_WWE.part04.rar
http://ktuluviathan.googlepages.com/HTC_Gene_WWE.part05.rar
http://ktuluviathan.googlepages.com/HTC_Gene_WWE.part06.rar
PS: Sorry for the multiple files. I'm behind a proxy with payload limit.

WOW!!!!!
Thank you man!
It's wonderfull!!!!!

wonderful what ? can't unlock the super cid, can't flash into D600 DESIGN FOR CHINA ,GOD .
ANYNEWS ABOUT THE d600 wm6.0 rom?
thanks for share.

It was not the ROM to flash
it was just dump

Hope, this will help you to build WM6 for Dopod 600.

WM6 for D600
Any update Syrop ?

not yet
can't dump anything from dump file
something wrong
still working

VoIP Client for VOX?

Hello,
is there a way to use the VoIP WM6 embedded client with this smartphone? It seems that WM6 Standard (smartphone edition) does not come with VoIP support default. Does anyone know of a way to install VoIP client that comes with the PDA-version of WM6 (WM6 Professional)?
Thanks a lot, an answer would save me a lot of troubles,
Ionut

me to ...
Anyjoy anybody ??

have you tried to copy the relevant files?
which are mentioned int thread: {SOLVED} How to configure VoIP/SIP client in WM6.
in the \Windows directory:
*
* ipdialplan.xml
* dnsapi.dll
* voipphonecanvas.dll
* rtcdll.dll
or checked the registry, for any voip relevant entries,
maybe you only will have to set a registry and than it might work (e.g. like the gps component)
but i dont have a vox yet, im only guessing.
I think that vox doesnt support voip doesnt mean wm 6 standard doesnt support voip, it may mean that htc did not include the voip component.
other wm 6 standard smartphones might have it in the future.

its a posting related to the ppc version (since wm6 its called professional), i read that it should work properly even with a 200mhz wizard
http://forum.xda-developers.com/showthread.php?t=299950
it shouldn't have been removed from the standard (smartphone version)
regards
IRM

Some info on this:
I have used the WM6VoIP.cab posted here: http://forum.xda-developers.com/showthread.php?t=303558 - post nr. 2, and although at the beginning it looked like nothing happened, after changing the Home default view (start/settings/home screen) to something else (not sure what i did and dont have the VOX anymore), Internet Calling appeared as a plugin.
Hope this helps anybody...

ionutz6 said:
Some info on this:
I have used the WM6VoIP.cab posted here: http://forum.xda-developers.com/showthread.php?t=303558 - post nr. 2, and although at the beginning it looked like nothing happened, after changing the Home default view (start/settings/home screen) to something else (not sure what i did and dont have the VOX anymore), Internet Calling appeared as a plugin.
Hope this helps anybody...
Click to expand...
Click to collapse
forgot to mention that I setup the VoIP settings and used it and it works flawlessly. The only problem is that the sound goes in the back and not the earpiece, but this is smth that we should still investigate.

I've added some instructions to the VOX wiki. Maybe some find it usefull and could expand it regarding the IPDialplan.xml (A non VOX but WM6 specific topic on that would sure be helpful).
http://wiki.xda-developers.com/index.php?pagename=HTC_Vox

great stuff ... up and working ... Htcs710 ... all we need to do now is sort out the issue with the sound coming out of the back .. and clues or pointers ??
tim

Has anybody any ideas how to get the sound to come out of the front instead of the speakerphone ?

timo75 said:
Has anybody any ideas how to get the sound to come out of the front instead of the speakerphone ?
Click to expand...
Click to collapse
Not sure yet and I am in desperate need of a solution. I will try to find out some more reading other threads about the VoIP settings here at xdadev. In case any of you finds a way to make the sound go in the front earpiece for this type of smartphone, pls email me at ionutz (at) pdamobile.ro.
Thanks a bunch!

Hi there.
Although the phone somehow registers to the VOIP service, I always get a "Network Error" when I try to place a call.
Could be provider dependant, maybe with some others it works...
Anyhow, just to let me understant, would you mind posting the name of your provider (or PM it to me if against the rules) so that I check with them?
Other thing, your today plugin stays as well on "Searching", right?
Thanks,
Ka.

Hi,
Regarding the the sound coming out of the back of the phone instead of the front, it is also happening to me with Skype so that may indicate it is something to do with the way the handset is setup by default and not the SIP add-in, maybe a registry setting.

Hi
Anyone found a solution to the VoIP sound coming out the speaker rather than the earpiece?
Regards
Phil

does it work over cdma without wifi
ionutz6 said:
forgot to mention that I setup the VoIP settings and used it and it works flawlessly. The only problem is that the sound goes in the back and not the earpiece, but this is smth that we should still investigate.
Click to expand...
Click to collapse
does it work on cdma without wifi

Does nobody use VoIP? Or is everyone just ignoring the issues?

There is quite obviously an issue with ALL ROMs except the original 5.2.318 with regard to VoIP and the Wizards integrated speakers. I would have thought VoIP was one of the major attractions of WM6 and I can't believe everyone who is using it is using a BT headset permanently. However it seems to me that there is a distinct lack of enthusiasm for getting this working in the newer Wizard ROMs or have I missed something
I need VoIP (& L2TP/IPSec...) to work reliably, I also want a recent ROM for the speed and because it's newer (don't reply with 'just downgrade to 5.2.318...').
Is anyone working on fixing the VoIP & Speaker issues with the latest ROMs? (please)
Andy

after your PM, i'm really listed your issue with others, i have many foundations in VoIP differences between .318 build and others (2 of them we tested them together).
there are two roms comming soon (1437 build and 1908 build), test them and report please to try more.

its right said:
there are two roms comming soon (1437 build and 1908 build), test them and report please to try more.
Click to expand...
Click to collapse
Do I understand it well that you are working also on the build 1908?
I was a bit dissapointed that you announced using 1437 for future...
Well, I understand that stability is the most important (so far I think that TNT 4 was the best ROM), but I would like to try a higher build from somebody who really tries to fix things...
From what I read I am not very satisfied with 1908 ROMs available (quite a few complains about bugs).
Mirek

mirekluza said:
Do I understand it well that you are working also on the build 1908?
I was a bit dissapointed that you announced using 1437 for future...
Well, I understand that stability is the most important (so far I think that TNT 4 was the best ROM), but I would like to try a higher build from somebody who really tries to fix things...
From what I read I am not very satisfied with 1908 ROMs available (quite a few complains about bugs).
Mirek
Click to expand...
Click to collapse
yes, i'm working on both.
i think i will release them at the same day.
1908 build has many of fixes, but it wasn't very compatible with wizard drivers, i'm at the last touches with the drivers.

I think until a post appears with a title like:
New Microsoft RIL & HTC Wizard Audio driver update to support VoIP
Click to expand...
Click to collapse
Then VoIP is going to be a problem in all ROMs later than the 5.2.318 build. My understanding is there is an issue with the Wizards audio driver and that it doesn't interface with the M$ RIL correctly? correct me if I'm wrong?
Does anyone know how we could modify the driver to work with the latest M$ RIL?
Andy
p.s. can we keep this thread on topic as there are hundreds of others dealing with the latest builds and custom ROMs, I wanted this to open up a discussion regarding why VoIP doesn't work with the Wizards integrated speaker and how we can resolve this.

ADB100 said:
I think until a post appears with a title like:
Then VoIP is going to be a problem in all ROMs later than the 5.2.318 build. My understanding is there is an issue with the Wizards audio driver and that it doesn't interface with the M$ RIL correctly? correct me if I'm wrong?
Does anyone know how we could modify the driver to work with the latest M$ RIL?
Andy
p.s. can we keep this thread on topic as there are hundred of others dealing with the latest builds and custom ROMs, I wanted this to open up a discussion regarding why VoIP doesn't work with the Wizards integrated speaker and how we can resolve this.
Click to expand...
Click to collapse
on the next releasing, i used exactly the same drivers of 318 build (some roms used as files, but this time used as modules), so if something fails because of drivers, it should be fixed.

http://forum.xda-developers.com/showthread.php?t=299950

jwzg said:
http://forum.xda-developers.com/showthread.php?t=299950
Click to expand...
Click to collapse
No, I know how to get VoIP working, the issue is with the latest ROM builds the VoIP audio is not routed to the Wizards integrated speakers (either the Phone speaker or the Stereo speakers).
My understanding is the M$ RIL (Radio Interface Layer) has changed considerably in the latest builds and the HTC Audio Driver has not been updated so does not interface correctly with this RIL. Therefore the drivers from the 5.2.318 build are not going to solve the issue. Correct me if I am wrong here, but this is how I understood the issue?
Andy

That thread covers a plethora of issues. Having read through most of it, I believe this was a problem that may have been addressed earlier, but not solved. I would put out some feelers with Sleuth255 and eluth and see what you come up with and tie your feedback into this thread. I'd be willing to help, it's just that I've lost interest with WM6 since I've been running AKU3.3 on my device and had no hiccups, and I'm also using my device very heavily in my new job.

Still getting nowhere............
I have asked several people on here and there seems to be no resolution to this fundamental issue
I still see everyone including VoIP (or providing a link to an 'add-on') in their builds of ROM's based on 5.2.1437 or later, yet it doesn't work
If anyone has any updates to this then please post them.
Andy

ADB100 said:
I have asked several people on here and there seems to be no resolution to this fundamental issue
I still see everyone including VoIP (or providing a link to an 'add-on') in their builds of ROM's based on 5.2.1437 or later, yet it doesn't work
If anyone has any updates to this then please post them.
Andy
Click to expand...
Click to collapse
the fastest way to fix this is to learn how to cook, then i will give many of possible fixes, and i'm sure you will solve it.
its very simple to learn how to cook, but of course if you have a time.

its right said:
the fastest way to fix this is to learn how to cook, then i will give many of possible fixes, and i'm sure you will solve it.
its very simple to learn how to cook, but of course if you have a time.
Click to expand...
Click to collapse
I can and have cooked many ROMs. The ROM you posted previously as a test would not work as I said in the thread. I did not want to waste time extracting this as the VoIP components you posted to test with I have already tested and they don't work. If you have some alternatives then please let me know.
I currently have a kitchen that I have modified based around WhiteRat's 5.2.1437 Base. I have VoIP integrated into this, however with all ROM's created from this the fundamental issue remains - no sound from the onboard speakers when using VoIP I assume there are no differences between your 5.2.1437 Base and WhiteRat's since you both have rebased drivers based on the original 5.2.318 ROM.
Andy

ADB100 said:
I can and have cooked many ROMs. The ROM you posted previously as a test would not work as I said in the thread. I did not want to waste time extracting this as the VoIP components you posted to test with I have already tested and they don't work. If you have some alternatives then please let me know.
Andy
Click to expand...
Click to collapse
ok, we will play with SYS folder, you have to get 318 full kitchen (which work with you), then we will start with replacing some packages on the SYS folder, the most important Phone folders, then shell folder, then OS folder, and after every change test it if it worked or not.
ADB100 said:
I currently have a kitchen that I have modified based around WhiteRat's 5.2.1437 Base. I have VoIP integrated into this, however with all ROM's created from this the fundamental issue remains - no sound from the onboard speakers when using VoIP I assume there are no differences between your 5.2.1437 Base and WhiteRat's since you both have rebased drivers based on the original 5.2.318 ROM.
Andy
Click to expand...
Click to collapse
as you said you can extract, then extract that and open OEM Drivers for the both, what do you notice??, and also there are many issues has been solved. I know he worked hard, but itsn't mean they are the same .
waiting for your tests and hope you will fix it.

I have Rom TNT5, and i can make calls with my voip provider (voipcheap) when I'm connect with wifi.
I can connect internet by activsync (no wifi, no gprs).
Can i use VOIP by activesync? or i must connect by wifi??

ftomas said:
I have Rom TNT5, and i can make calls with my voip provider (voipcheap) when I'm connect with wifi.
I can connect internet by activsync (no wifi, no gprs).
Click to expand...
Click to collapse
Hi, I have tried TNT5 and VoIP appears to work, however when I make a VoIP call there is no audio via the integrated speaker. If I use a BT Headset I can hear the audio but never from the speaker, this works with the older 5.2.318 based ROM's. Can you give me more details of what settings you use and whether you have a G4 or G3 Wizard?
I am going to extract its rights 'Professional' 5.2.1437 ROM and see where it leads me.......
Can i use VOIP by activesync? or i must connect by wifi??
Click to expand...
Click to collapse
I don't think so, when I leave my WiFi connected and then connect the USB for ActiveSync the Internet Calling goes to 'No Service'. I think this is by design, however I could be wrong?
Andy

Hi, I have tried TNT5 and VoIP appears to work, however when I make a VoIP call there is no audio via the integrated speaker. If I use a BT Headset I can hear the audio but never from the speaker, this works with the older 5.2.318 based ROM's. Can you give me more details of what settings you use and whether you have a G4 or G3 Wizard?
Click to expand...
Click to collapse
Hi,
I have a wizard G3, TNT 5 Professional + HTC Home
Install this 2 files:
voip cab from post#4
Setup_voip 0.3.cab from post 1
Run the setup voip with this settings:
Provider: Voipcheap
My user end password
Registrar address: sip.voipcheap.com port: 5060 UDP
Sip proxy: sip.voipcheap.com port: 5060 UDP
URI address: the program wrote it
Thats all

ftomas said:
Hi,
I have a wizard G3, TNT 5 Professional + HTC Home
Install this 2 files:
voip cab from post#4
Setup_voip 0.3.cab from post 1
Run the setup voip with this settings:
Provider: Voipcheap
My user end password
Registrar address: sip.voipcheap.com port: 5060 UDP
Sip proxy: sip.voipcheap.com port: 5060 UDP
URI address: the program wrote it
Thats all
Click to expand...
Click to collapse
is this will fix the issue which you can't hear the sound through the speaker!!!

i thought so....
because when i made my first try i hear the other person...
but was only that time... now i can't hear anymore
maybe i was dreaming

i gave the possible solves, i hope someone works on.

ftomas said:
i thought so....
because when i made my first try i hear the other person...
but was only that time... now i can't hear anymore
maybe i was dreaming
Click to expand...
Click to collapse
Hmm, I was getting all excited for a minute there.......

Help with upgrading my K-JAM to WM6 & picking a ROM, etc.

Hey all, I hope you'll go easy on me as this is the first time I've ever flashed a WM device and the prospect of going wrong has caused me to post here! If anyone could talk me through this I'd be most greatful.
First off thanks for the guide which I've been studying for the best part of the day! I now think I'm ready to give it a try.
I have an i-mate K-JAM with an IPL/SPL of 2.16 which I assume means I have a G3.
I hope I've got it right...
I assume I'll need to downgrade using the Button rom to 1.05 then use Lokiwiz to perform a CID unlock (dunno if my device is CID locked or not, I'll just guess that it is).
Next step will be to upgrade to this T-Mobile ROM and then upgrade to IPL/SPL 3.08 to make the device boot faster.
Now it's time to flash with a WM6 rom right?! .
I'm a little wary of the huge variety of ROMs available. I realise I can't ask 'what's the best ROM' which is fine but I'd like to know which roms people would recommend for maintaining the same functionality of the original WM5 rom that came with my K-JAM, give me the ability to make VoIP calls (I have a voipcheap sip account) and be rather speedy.
I've heard good things about the TNT ROM which appears to have the above things I need. I assume this is the ROM I'll need - I think I'd prefer to add apps seperately so I guess it's best to go with the 'Official' version over 'Professional'.
About VoIP - I've seen people have been having issues with the other persons sound coming from the loudspeaker, has this issue been sorted now?
Let's say I decide to go back to WM5 (for whatever reason) at a later stage, I assume this'll still be possible by following the exact same downgrade/upgrade steps in the guide?
I hope I'm on the right path. Thanks to anyone who can help out!

HAY
I UPDATE MY K-JAM WITH TNT WM 6.1 TOUCHFLO ROM IT WORKING FINE
LINK.
http://forum.xda-developers.com/showthread.php?t=367534

fayizk1 said:
HAY
I UPDATE MY K-JAM WITH TNT WM 6.1 TOUCHFLO ROM IT WORKING FINE
LINK.
http://forum.xda-developers.com/showthread.php?t=367534
Click to expand...
Click to collapse
Cheers, did you follow the same kinda procedure in my post? Have you messed with VoIP at all, if so how's it working for you?
Is WM6 running a lot smoother than WM5?

All done!
Just have one last question for now here

SMS92 said:
All done!
Just have one last question for now here
Click to expand...
Click to collapse
Sorry, I've tuned into your question late. If it helps, I'm using mfrazz's XM6r3 ROM (I tried a more recent one that was buggier and went back to 3.) VoIP (Internet Calling) worked "right out of the box"- I just had to load one of the VoIP configuration utilities floating around here to enter my provider settings.
The only two issues really are that it uses the loadspeaker instead of the earspeaker (but bluetooth works fine) and the biggest issue- the Wizard is just too d**m slow for Internet Calling to work well- the audio is very choppy without overclocking (which I'm loathe to do.)
Fring, from Fring.com is a decent app for VoIP on slow WM phones like the Wizard, so I have that installed as well. It lets you use Skype, Google Talk, and a few other VoIPs as well as one SIP provider all in one app. It's not perfect either- it also uses the loudspeakers, it's akward to dial from (it has no real "dial pad"- you can either dial an existing contact by selecting one, or another number by selecting any contact and "overriding" their displayed number), it doesn't support DTMF (so there's no way to "press 1 for English...") and it always leaves the device volume at full blast when you exit the app, but it's got the best audio quality of any VoIP app I've used on the Wizard. (I used it from Mexico back in January over my hotel's WiFi to make $0.02/minute calls back to the States rather than T-Mobile's generous $1.49/min roam rate!)

WM6.5 ROM with SIP VOIP

Hi,
Can someone suggest what WM6.5 ROM I can use that has SIP VOIP capability? I am using 6.5.1.7 - 23085 from md_bluelily (which works great on my 8125!) but it does not appear to include SIP.
Thanks.

sandeepmaheshwari said:
Hi,
Can someone suggest what WM6.5 ROM I can use that has SIP VOIP capability? I am using 6.5.1.7 - 23085 from md_bluelily (which works great on my 8125!) but it does not appear to include SIP.
Thanks.
Click to expand...
Click to collapse
What do you mean with SIP VOIP? Sorry no time for research

Hi,
I mean "Internet Calling" feature of WM6.x
Please read this post for more details on what I am looking for:
http://forum.xda-developers.com/showthread.php?t=299950
I was unable to get this to work with this ROM, so I assume that it is not included.
Thanks

Sorry, my bad. It does work fine with this ROM... just my lack of understanding of how to use the SIP feature of WM.

You can use BsbG rom, Makeveral has not removed the voip files

Voip ENERGY Leo ROM
Dear all I have searched en searched but didn't find a answer anywhere.
The problem is next:
I want to use VOIP on my TP2.
In the ENERGY Leo ROM VOIP is integrated.
I only download a SIPconfig tool to make it work.
But I don't get the speaker and the mic. to work properly.
Calling as a fact is working but then the people can’t hear my.
And I hear than only over the back speaker.
Does somebody know how to solve this problem??

I wonder the same thing and I searched too on the forums, but SIP seems to be also something to do with keyboards
Since the VOIP funcionality has been removed by HTC (probably necessitated by the telephone company) am I to assume that all the custom ROMs have not removed it? Because in the versions they modify (i.e. kitchens) it is still included or not? It would only be logical, as it's such a useful - not to mention incredible cost effective - function!
So could someone spread any light on this: do all the ROMs have it or just some? If only some, which?
Or do I still need something like the CAB files from these sites (which don't quite work for me on the original ROM).
forum.xda-developers.com/showthread.php?t=574521
modaco.com/content/smartphone-software-applications/285681/howto-use-voip-already-build-in-all-wm-6-x-based-phones/#entry994775
I just want to only have to plug in my sip server and account details and be ready to go... which ROM(s) have that?

sip voip solved
http://forum.xda-developers.com/showthread.php?t=596682
tested and working

good one
http://forum.xda-developers.com/showthread.php?t=596682