Database Info

MMS sending size? 300 vs 600 Kb

I tried a few of the ROMs here on my Tilt already. I noticed on a couple of them that the sending size for the MMS was set at the old 300Kb limit. I often send stuff that is right at the 600Kb limit and want to keep that limit.
I noticed on a few of the cooked ROMs the limit was 300Kb, and I couldn't figure out a way to change it, even going through configuration and settings.
So, my questions are as follows (and, yes I did search)-
Is there a way to change it that I'm just not seeing (short of maybe a regedit?)?
What ROM are you running, and what is your sending limit? (this is the one I came up with no answer at all for when searching)
Could this have to do with a particular MMS install .cab file? (similarly I didn't see an answer for this one. Lots of cab links, but no specs on the limit)
Thanks!
EDIT: Dangit, I put this in the wrong forum. I meant to put it in the Kaiser forum.

over2land said:
I tried a few of the ROMs here on my Tilt already. I noticed on a couple of them that the sending size for the MMS was set at the old 300Kb limit. I often send stuff that is right at the 600Kb limit and want to keep that limit... Is there a way to change it that I'm just not seeing (short of maybe a regedit?)?
Click to expand...
Click to collapse
By "short of a regedit" do you mean you DON'T want to edit the registry? You may find a cab for ARCSoft or whatever MMS client you're using that has the larger sending size limit. But it would probably be quicker to just change it manually by editing the registry. Check this post for the Hermes, most likely it will work on the Kaiser also.

Set MMS Send Limit to 600 kb
over2land said:
I tried a few of the ROMs here on my Tilt already. I noticed on a couple of them that the sending size for the MMS was set at the old 300Kb limit. I often send stuff that is right at the 600Kb limit and want to keep that limit. . .
Click to expand...
Click to collapse
hotmail said:
. . . it would probably be quicker to just change it manually by editing the registry. Check this post for the Hermes, most likely it will work on the Kaiser also.
Click to expand...
Click to collapse
@over2land: I have been wondering about this also!
@hotmail: Thanks for your reply - I changed registry items per your post in the Hermes thread and now have 600 limit. I didn't find any registry keys with title of Wap1SendLimit_x - so I just changed the SendLimit keys, and also changed the ReceiveLimit keys, and Voila! good to go!

hotmail said:
By "short of a regedit" do you mean you DON'T want to edit the registry? You may find a cab for ARCSoft or whatever MMS client you're using that has the larger sending size limit. But it would probably be quicker to just change it manually by editing the registry. Check this post for the Hermes, most likely it will work on the Kaiser also.
Click to expand...
Click to collapse
If regedit is the only way to do it, I'll do that. Right now I'm back on the ATT OE ROM and radio, since I'm on ATT, it works for me. I get the 600Kb limit. But, the cooked ROMs are typically faster and have more storage, so at some point I'll end up going back to a cooked ROM.
I was hoping that there was some setting going through the phone's UI that I could change. Even though I've regedited every phone I've had, I'm not 100% on regediting this one just yet.
I am using ARCsoft... I was hoping to avoid having to DL every .cab I can find for that limit. I was figuring if people posted their cabs or thier ROMs with the 600Kb limit, then someone like myself who didn't want to necessarily reg edit the phone would have some recourse.

I think I have a cab that's got the 600k mod in it. if you want it, let me know.

RR ATT settings cab
http://forum.xda-developers.com/showthread.php?t=415585 , it changes the Media Net settings a bit, just take note of the OG settings to input after install

http://www.4shared.com/file/69575927/74bdbf1e/Raiisaks_Kaiser_3MB_MMS_limit.html
http://www.4shared.com/file/69575931/84c52b6a/Raiisaks_Kaiser_600k_MMS_limit.html
over2land said:
I tried a few of the ROMs here on my Tilt already. I noticed on a couple of them that the sending size for the MMS was set at the old 300Kb limit. I often send stuff that is right at the 600Kb limit and want to keep that limit.
I noticed on a few of the cooked ROMs the limit was 300Kb, and I couldn't figure out a way to change it, even going through configuration and settings.
So, my questions are as follows (and, yes I did search)-
Is there a way to change it that I'm just not seeing (short of maybe a regedit?)?
What ROM are you running, and what is your sending limit? (this is the one I came up with no answer at all for when searching)
Could this have to do with a particular MMS install .cab file? (similarly I didn't see an answer for this one. Lots of cab links, but no specs on the limit)
Thanks!
EDIT: Dangit, I put this in the wrong forum. I meant to put it in the Kaiser forum.
Click to expand...
Click to collapse

I'm guessing the 3mb limit does not apply to AT&T's network? Or do they support a 3mb file going out?

BerettaFreak said:
I'm guessing the 3mb limit does not apply to AT&T's network? Or do they support a 3mb file going out?
Click to expand...
Click to collapse
Not sure about ATT but I installed this cab and went into the MMS settings and changed the limit to 3mb but I've only sent out a 1mb file or so over the Tmobile network. Works good

Does it cost more to send a larger mms?

Harsesis said:
Does it cost more to send a larger mms?
Click to expand...
Click to collapse
No standard text messaing rates apply

daddy_yankee1980 said:
Not sure about ATT but I installed this cab and went into the MMS settings and changed the limit to 3mb but I've only sent out a 1mb file or so over the Tmobile network. Works good
Click to expand...
Click to collapse
i've installed the .cab , where did u change the limit? in the registry?

Hello,
how can I revert the setting to 300kb back?

kiltbaq said:
i've installed the .cab , where did u change the limit? in the registry?
Click to expand...
Click to collapse
I'm stuck here too... anybody???

For the 3MB one, and in the same post is the 600kb one. Post also includes a .gif on how to.
http://forum.xda-developers.com/showpost.php?p=2309317&postcount=39

a newer and improved vox?

i got my vox a month ago and i love the design. probably the only smartphone design out there that looks as good as it does. But the problem i'm having with it is the performance level...i've had it lock up on me, sometimes it takes forever to load a simple task such as my text messages. I love the phone design to death, is there a phone that keeps this slick design but performs just as well? I know htc released a s730, but really? lol come on, its bigger, contains the same amount of ram, faster processor but still...
Or is it time i move to a pocket pc? do they perform better than smartphones? Or am i looking at this entirely from the wrong view, is it windows mobile thats causing this? is there away i could change the OS installed, maybe like the OS pocketpc's run? I'm not new to all this, but I would like some input and what everyones feeling, or if anyone is feeling the way I am. thanks again guys, looking forward to your responses
p.s. if you have any recommendations on devices i should look at, please let me know cause I might start looking for something new

One solution is to overclock your vox.
For me is very frustrating, slow opening of new SMS, too!
I don't know any other way to speed up your device.

matrix77 said:
One solution is to overclock your vox.
For me is very frustrating, slow opening of new SMS, too!
I don't know any other way to speed up your device.
Click to expand...
Click to collapse
ya i have it overclocked to 252 mhz, there is a improvement but why does it take so long to send a sms? not to mention the amount of steps that need to be taken to do so, open messaging, text messages, new, have to open contact list (which takes a while) then select a contact, select their mobile number, hit enter, then finally start typing.
I was looking at the iphone, and some reviews off youtube, the phone seems really responsive and fast, anyone with any suggestions? wondering if that might be a good step up?

You can start typing the name you want to write to on homescreen so the contact shows up. Then with left/right arrows select SMS, when you open it it goes directly to sending a SMS to this contact, same applies to the phone book and it will stay that way.

frauhottelmann said:
You can start typing the name you want to write to on homescreen so the contact shows up. Then with left/right arrows select SMS, when you open it it goes directly to sending a SMS to this contact, same applies to the phone book and it will stay that way.
Click to expand...
Click to collapse
wow that is alot faster! didnt know that, makes texting a whole lot faster. guess i've been doing it the long way, hence the bitter taste its left. question, is windows mobile operating system more efficient than what the pocketpcs have installed?

For me that's really the most interesting thing in the iPhone, the fact that its interface is so fluid, everything seem to load fast . It seems really less frustrating to use. The only problem for me is that it is not as easy to tweak it as is windows mobile. Too bad windows mobile 7 still is a long time ahead..

But at least Windows Mobile 6.1 is due for the first quarter 08, let's hope that it will bring some improvements!
The thing about the MacOS X and the iPhone is that it's only designed for a couple devices, so it's very customized for these. Windows and Windows Mobile is made for thousands of different machines, so problems are just inevitable.

Speed improvements would be great indeed But my hopes are not very high

Dr. Martin Gonzo said:
Speed improvements would be great indeed But my hopes are not very high
Click to expand...
Click to collapse
i think we've peaked in terms of performance and speed with the vox, the iphone GUI is amazing not to mention how flawlessy it flows from one application to another. Only thing I can give iphone a hard time for is it doenst seem homebrew friendly.
So that being said, would you guys recommend/suggest a vox ->iphone upgrade? or just stick with the vox?

Sick with the Vox and try the lates official HTC ROM, it's available on the XDA-developers ftp site. I fashed my Vox to it yesterday and it is alot faster than the original Vox ROM and is slightly smaller aswell leaving more RAM free to install apps like facade and PhoneAlarm.
Roland

I also didn't like how long it took to open messaging and start a new text message. Its the main reason I overclocked my s710. Here's a couple of other things that I came across while trying to improve messaging speed. Working in combination, they made a huge difference for me:
1. overclocked to 252mhz
2. place a shortcut in your \windows\startup folder with the following commands:
58#"\Program Files\load.exe" -hide "\Windows\tmail.exe"
81#"\Program Files\load.exe" -hide "\Windows\tmail.exe" -service "SMS" -to ""-body""
Opens the messaging app in the background on startup. Opens a new blank text message on startup. Requires load.exe to be able to open in the background. Since it is already open in the background, you can access messaging instantly. Whatever method you choose to open a new text message will also be faster since their is already a blank open text message in the background.
3. I like the method mentioned above of typing the contact then selecting Send Text Message. Another method that is just as fast is to create a shortcut to your blank open text message and place it in your Program Files folder (or wherever, I have mine as a shortcut in my facade launcher bar). The shortcut contains the same new text message command as above (just without using load.exe to hide it in the background):
49#"\Windows\tmail.exe" -service "SMS" -to ""-body""
Opening this brings you directly to your blank text message, just select your contact and start typing.
Hope this helps!

wow! god thats amazing, loads instantly :|! and its even more amazing that your a junior member, did you read this somewhere? if not, cudos to you, thanks a lot loving that small tweak ALOT! appreciate it. hopefully more people read this.
Wish there was a program that ran more tweaks to help smartphones performance

After figuring out tmail.exe was the messaging app, I kinda just played around with that and load.exe (found in "how to pimp your s710" thread on Modaco.com) to see what would happen. After that I came accross that command to open a new blank text message on some random tweaks page. Had to try it out with load.exe too. Glad I did . Simple stuff can make a big difference. My last phone was a simple Nokia 6133 flip, and I could access text messaging or a new text message within a second of opening the phone...not really that important, but I wanted that streamlined access to messaging with the s710. I think these little tweaks make it pretty close.

i've created the shortcut, but for some reason it doens't load....my question is when i tried to run tmail manually from file explorer it loads up the messaging center, and not straight into text messages (option 1 of the text messaging center). now i was curious if theres a way we can get text messaging loaded directly

now I get what you were saying in your PM, you want to go directly to the text messaging section of tmail.exe. Try this:
35#"\Windows\tmail.exe" -service "SMS"
Put this in a shortcut. When you open it, it should take you to your text messages.

spiralinfusion said:
now I get what you were saying in your PM, you want to go directly to the text messaging section of tmail.exe. Try this:
35#"\Windows\tmail.exe" -service "SMS"
Put this in a shortcut. When you open it, it should take you to your text messages.
Click to expand...
Click to collapse
perfect thanks , will try it and let you know. thanks again

App to disable/enable threaded messaging

I just got my hands on the new Shadow 2009 ROM and I found a nice little app that will enable or disable the threaded messaging of you 6.1 ROM!
Copy it anywhere on the phone and run it. Then choose "Classic" or "Threaded" and click done and reboot!
Done

perfect!
it works great
you don't even have to restart. just kill the outlook/text messages process (tmail.exe) and apply the tool.
(little thing: when switching from classic to threaded, outlook takes a lot of time to load and organize the threads)
(edit: and after that it takes ages to open a thread, so maybe restarting the vox is best anyway )

really! does it ask for reboot or do u need to kill process? why taking so much pain man!
Its just a matter of going in registry and change DWORD key "SMSAvailable" from "1" to "0". Thats it, no reboot.
to revert, change 0 to 1, again no reboot. it takes in effect immidiately.

yes that's true, but the reorganizing of the threads then also happens, and that is quite a pain with 1400 messages......
i prefer being non-threaded: much faster and the delete-option of deliverynotifications of smsbubbles works correct then.

birdibird said:
yes that's true, but the reorganizing of the threads then also happens, and that is quite a pain with 1400 messages......
i prefer being non-threaded: much faster and the delete-option of deliverynotifications of smsbubbles works correct then.
Click to expand...
Click to collapse
Absolutely correct, in threaded mode sometimes while composing SMS, it does not work properly and erase what you typed suddenl and u have to type again.
I never use threaded.

How do I enable multiple selection (like in selecting multiple emails for deleting)

Colleagues,
Since I upgraded to the latest stock ROM, I lost the ability to select multiple items at the same time. For example, I used to be able to go into the Inbox, and with the stylus, select multiple emails to delete them all at once. After the upgrade, I cannot select multiple.
Any way of getting this back?
Best regards,
JD

jdomi99 said:
Colleagues,
Since I upgraded to the latest stock ROM, I lost the ability to select multiple items at the same time. For example, I used to be able to go into the Inbox, and with the stylus, select multiple emails to delete them all at once. After the upgrade, I cannot select multiple.
Any way of getting this back?
Best regards,
JD
Click to expand...
Click to collapse
There is a .cab file floating around somwhere. It can be resolved, it is a simple registry change. I have the cab at home, I will try to upload it tonight if I remember. I think I got it from one of the NATF threads. A good old fashion search should yield a result.

jdigital007 said:
There is a .cab file floating around somwhere. It can be resolved, it is a simple registry change. I have the cab at home, I will try to upload it tonight if I remember. I think I got it from one of the NATF threads. A good old fashion search should yield a result.
Click to expand...
Click to collapse
I did the old fashion search on the topic before I posted but nothing yielded that was even close. I really appreciate if you can upload the CAB here.
Best regards,
JD

jdomi99 said:
Colleagues,
Since I upgraded to the latest stock ROM, I lost the ability to select multiple items at the same time. For example, I used to be able to go into the Inbox, and with the stylus, select multiple emails to delete them all at once. After the upgrade, I cannot select multiple.
Any way of getting this back?
Best regards,
JD
Click to expand...
Click to collapse
You could also just highlight the first one and scroll to the last on that you want to delete, hold shift, and click the last one. Thats what I always do.

This is the case for all roms in a while actually. imo its a step backward. in ur email options there is a select messages option which allows u to select multiple entries.
This cab includes the fix to bring it back to normal. It is from Romeos2 as an addon cab, i dont see why it would conflict with any settings in ur rom. u can always remove it.
I have been using it with every rom update, i like to mark my emails as read when i read them on my computer, etc. Again i cannot promise it will work with a non romeos2 rom properly, but it isnt anything vital being changed so ur phone shouldnt get messed up either

euphoria47 said:
This is the case for all roms in a while actually. imo its a step backward. in ur email options there is a select messages option which allows u to select multiple entries.
This cab includes the fix to bring it back to normal. It is from Romeos2 as an addon cab, i dont see why it would conflict with any settings in ur rom. u can always remove it.
I have been using it with every rom update, i like to mark my emails as read when i read them on my computer, etc. Again i cannot promise it will work with a non romeos2 rom properly, but it isnt anything vital being changed so ur phone shouldnt get messed up either
Click to expand...
Click to collapse
I installed the CAB and did not make a difference.
You guys know what I am talking about, right? I want to be able to put the stylus on the first message I want to select and hold it while dragging it to the last message I want to select.
Best regards,
JD

jdomi99 said:
I installed the CAB and did not make a difference.
You guys know what I am talking about, right? I want to be able to put the stylus on the first message I want to select and hold it while dragging it to the last message I want to select.
Best regards,
JD
Click to expand...
Click to collapse
Yes, this feature was replaced with the Menu item for "Select" that allows you to choose "Several", "All" or "All Below", in newer ROMs.
This is 'fixed' by disabling Microsoft Touch Gestures as indicated below:
!Aman! said:
microsoft have disabled the ability to use multi select in newer builds. however you can recover most of the multi-select feature by making a following reg key:
[HKEY_CURRENT_USER\ControlPanel\Gestures\Touch]
"Disabled"=dword:1
after making this key, multi-select with finger/stylus will work everywhere except the inbox.
Click to expand...
Click to collapse

Captain_Throwback said:
Yes, this feature was replaced with the Menu item for "Select" that allows you to choose "Several", "All" or "All Below", in newer ROMs.
This is 'fixed' by disabling Microsoft Touch Gestures as indicated below:
Click to expand...
Click to collapse
Tried the registry fix but it didn't work anywhere so I put it back the way it was. It is a shame this feature is removed from the newer ROM.
Regards,
JD

Gmail Contact Formatter || 2/14/2011

Several of the Froyo Roms that I've used had an issue that wouldn't allow me to send MMS if the phone number had parenthesis in the format. I saw several people posting that they didn't want to have to edit each contact in Gmail to remove the parentheses, so I created the application.
This application will format all of your phone numbers in your Gmail account based on your desired format.
Available Formats:
Numbers Only
Ten Digit Number
Ten Digit Number With Parenthesis
One Plus Number
One Plus Number With Parenthesis
One Plus Number With Parenthesis And Plus Sign
Three Plus 8 With Parenthesis
Latvia Format
(other formats could be added if needed)
This is a windows application that requires .Net 4.0 as a prerequisite. Gmail doesn't really have any way to modify your contacts in bulk, so I have also been thinking about doing some other things to help keep your contacts organized. If you have any ideas, let me know and I'll try to integrate those enhancements as well.
This application has been moved to the android market.
https://market.android.com/details?id=com.tyenee.android.googlecontactformatter
Download:
http://www.mediafire.com/?xbtcqx97fx465eb - 1.0.0.9 (2/14/2011)
http://www.mediafire.com/?cfwdvg32crd68o5 - 1.0.0.8 (2/8/2011)
http://www.mediafire.com/?ct0tvx1uxaxck8x - 1.0.0.7 (2/8/2011)
http://www.mediafire.com/?3tujh783dzifc8p - 1.0.0.6 (2/7/2011)
http://www.mediafire.com/?bts1wg70vxxlb0v - 1.0.0.5 (1/26/2011)
http://www.mediafire.com/?ql7v763n4pcrpsv - 1.0.0.4 (1/24/2011)
http://www.mediafire.com/?om468391bxt9v3x - 1.0.0.3 (1/20/2011)
http://www.mediafire.com/?f3m3k1hqn9n0rdm - 1.0.0.2 (1/12/2011)
http://www.mediafire.com/?rywrvzr6eboxord - 1.0.0.1 (1/11/2011)
http://www.mediafire.com/?55shl1vpompy21h - 1.0.0.0 (11/18/2010)
1.0.0.9
Complete UI overhaul
Allowing preview of changes
Allowing selction of individual contacts to process
Allowing filtering of contacts by group
1.0.0.8
Added One Plus Number With Parenthesis And Plus Sign
1.0.0.7
Added Latvia Formatter
1.0.0.6
Added Three Plus 8 Formatter
1.0.0.5
Added birthdate formatter
Improved speed
1.0.0.3
Fixed issue when choosing Numbers Only
1.0.0.3
Added additional error logging
1.0.0.2
Added support for adding area codes
Added validation for required fields
Changed label for Ten Digit Number to Ten Digit Number With Parenthesis
1.0.0.1
Added Ten Digit Number With Parenthesis
Added One Plus Number With Parenthesis
1.0.0.0
Initial Version

Reserved for op

Very nice... it would be really good if you could add a few more standard formats or even the source code. I personally like to us:
(###) ###-####
and all my contacts are not formated that way. Also I noticed that your Ten Digit Number actually converts it to 1 + Ten digit number format.
Thanks for the app... it is at least a starting point.
SoBBie
Hummm actually it seems to be giving me time outs and not working. oh well. Thanks again for the effort.

supersobbie said:
Very nice... it would be really good if you could add a few more standard formats or even the source code. I personally like to us:
(###) ###-####
and all my contacts are not formated that way. Also I noticed that your Ten Digit Number actually converts it to 1 + Ten digit number format.
Thanks for the app... it is at least a starting point.
SoBBie
Hummm actually it seems to be giving me time outs and not working. oh well. Thanks again for the effort.
Click to expand...
Click to collapse
I have added a couple other formats with parenthesis. Let me know if you need others.
As for the issue you reported...
Ten Digit Number actually converts it to 1 + Ten digit number format
I cannot reproduce this, so if you have anymore details, please let me know.

i wish i had this app 3 months ago lol. thanks for sharing it

PM Requests
I have fixed some of the things asked of me in PM's. If you have something that you would like added, just add it here in the thread and we can discuss the possibility of adding it.

Worked Like a Charm
Just ran it and it went smoothly with no errors. All contacts are now in xxx-xxx-xxxx format. Nice clean app. Donated already

gwktechnologies said:
Just ran it and it went smoothly with no errors. All contacts are now in xxx-xxx-xxxx format. Nice clean app. Donated already
Click to expand...
Click to collapse
I just ran it and got an request failed Error 5 times in a row what gives

studiorat said:
I just ran it and got an request failed Error 5 times in a row what gives
Click to expand...
Click to collapse
The error is from Google's web service. There should be a log file in the directory where the application resides. Can you look there for some more details related to the error? Also, are you behind a proxy server? That is something I haven't had the oportunity to test.
Sent from my SPH-D700 using XDA App

mmoorman12 said:
The error is from Google's web service. There should be a log file in the directory where the application resides. Can you look there for some more details related to the error? Also, are you behind a proxy server? That is something I haven't had the oportunity to test.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I cant locate the log file I am running it from the folder on the desktop it didn't install like a normal program would i will place it in a directory manually and try running it again!

studiorat said:
I cant locate the log file I am running it from the folder on the desktop it didn't install like a normal program would i will place it in a directory manually and try running it again!
Click to expand...
Click to collapse
There is no installation required. You just need to extract the zip file to a directory and you should have the following files in the directory.
GmailContactFormatter.exe
Google.GData.Client.dll
Google.GData.Contacts.dll
Google.GData.Extensions.dll
Google.GData.GoogleBase.dll
Just run the exe and the application should launch. Enter you Gmail credentials and select the format you wish to have. Then click on Update. At this point, a Log.txt file should be created and an Error.txt will be created if there were any errors. Both of these files should be created in the same directory.

Thanks for the application. I was able to change my contacts to ten digit numbers sucessfully but I can't do numbers only. It goes through all my contacts but it doesn't say its saving changes. Any ideas?
Edit: error log
Execution of request failed: http://www.google.com/m8/feeds/contacts/[email protected]/full?start-index=501&max-results=25
at Google.GData.Client.GDataRequest.Execute()
at Google.GData.Client.GDataGAuthRequest.Execute(Int32 retryCounter)
at Google.GData.Client.GDataGAuthRequest.Execute()
at Google.GData.Client.Service.Query(Uri queryUri, DateTime ifModifiedSince, String etag, Int64& contentLength)
at Google.GData.Client.Service.Query(FeedQuery feedQuery)
at Google.GData.Client.Feed`1.<get_Entries>d__0.MoveNext()
at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection)
at Tyenee.Windows.GmailContactFormatter.Form1.worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetResponse()
at Google.GData.Client.GDataRequest.Execute()
Click to expand...
Click to collapse

thejaredhuang said:
Thanks for the application. I was able to change my contacts to ten digit numbers sucessfully but I can't do numbers only. It goes through all my contacts but it doesn't say its saving changes. Any ideas?
Edit: error log
Click to expand...
Click to collapse
I found the problem and a fix has been posted.

Thanks for the update but I'm still having the same problem. It doesn't seem to print a log out either when I'm doing numbers only.

thejaredhuang said:
Thanks for the update but I'm still having the same problem. It doesn't seem to print a log out either when I'm doing numbers only.
Click to expand...
Click to collapse
I think there was a problem while uploading 1.0.0.4. Please try to download it again. This problem does not exist in my environment anymore.

Works great thanks!

Added a birthdate formatter to correct the birthdates on contacts which have 0001 as the year. It will change these contacts to Month/Day rather than Year/Month/Day.
Example for January 26
0001-01-26 will change to 01-26

WoW... Thanks, I think I am having some firewall issues at work so I will have to try this at home later. Thanks for your hard work.
SoBBie

Thanks
Thank you for this program, it works great, but why is it modifying system certificates before it runs?

ari_aaron said:
Thank you for this program, it works great, but why is it modifying system certificates before it runs?
Click to expand...
Click to collapse
I'm not really sure why you are seeing anything related to a certificate. I am not doing anything with certificates.
Sent from my SPH-D700 using XDA App