I found this posting over on the Hermes forum and was wondering if these programs might work on the wizard, specifically the comm manager (which has been suggested as part of a fix for a wifi connectivity issue) blue tooth explorer, and the Sim manager.
http://forum.xda-developers.com/showthread.php?t=301580
dcdivenut said:
I found this posting over on the Hermes forum and was wondering if these programs might work on the wizard, specifically the comm manager (which has been suggested as part of a fix for a wifi connectivity issue) blue tooth explorer, and the Sim manager.
http://forum.xda-developers.com/showthread.php?t=301580
Click to expand...
Click to collapse
Already installed the new COMM Manager and the BT Explorer and both are working just fine and dandy!
stmasi said:
Already installed the new COMM Manager and the BT Explorer and both are working just fine and dandy!
Click to expand...
Click to collapse
Thanks for being the guinea pig!!!
The comm manager though requires a registry tweak. According to Zoki (and what myself and others have done):
"Remove the entire key KEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN"
One you do that, then soft reset and you will be good to go with this comm manager and wifi will work.
Neither Bluetooth explorer nor COm Manager will install in my wizard??? and there is no KEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN"
there now
You won't have that registry key until you install that cab (which apparently doesn't install for you). That key is something with the Trinity and causes probs on the Wizard.
All these, and some more from T-Mobile AKU 3.3 are included in my rom I posted 2 days ago, have a look (http://forum.xda-developers.com/showthread.php?t=299821) or try.
Related
I've search high and low but can't seem to find a way to automagically turn on direct push after a soft reset. Anyone know a trick or am I missing something incredibly simple?
Second question... has anyone else had problems with Direct Push until they sync by hand once? I turn on Direct Push but it doesn't seem to actually sync until I go to ActiveSync and hit "sync" once by hand. After that it seems to work fine.
Third question (thanks for paying attention this long )... is there anyway to force notifications of new messages even when messaging app is in the foreground? Specifically, if I leave messaging in the foreground before the device goes into standby than I don't seem to get notifications.
Not sure if this makes a difference but running a Wizard w/ the Mr. Clean ROM (2.24.10.1).
On my Wizard I was using the T-Mobile 2.21 ROM, and on my Universal I am using the latest i-mate ROM, and both work perfectly. I don't have the issue you seem to have, so I guess either your push mail provider, or your ROM is the issue.
AlanJC said:
On my Wizard I was using the T-Mobile 2.21 ROM, and on my Universal I am using the latest i-mate ROM, and both work perfectly. I don't have the issue you seem to have, so I guess either your push mail provider, or your ROM is the issue.
Click to expand...
Click to collapse
Thanks for the info! I updated to AKU2.3 ROM 2.26. The second problem (need to sync by hand once) has gone away. Unfortunately Direct Push still isn't starting. I've been trying to track down the problem and it appears to be related to actually having Comm Manager running. As soon as I run Comm Manager it now connects automagically. But if I terminate the process (running WA2) the connection gets closed. So I add an exception to the WA2 task manager to prevent it from closing Comm Manager and it works (but Comm Manager is always runngin). Seems like an inelegant work around but maybe this is how MS intended it, start Comm Manager and Direct Push, our close button minimizes, and everything is honkey doory. Same thing on soft reset, Direct Push doesn't work until I run Comm manager by hand or unless I put Comm Manager in the StartUp folder.
The third problem is still there as well... no notifications on new mail if "messaging" is in the foreground.
1 down 2 to go
Issues 2 and 3 don't occur for me either though, so this is definately not an MS issue, if one of them was fixed by a ROM update, it looks as though the others are your ROM also.
Try one of the i-mate roms, or the latest ROM for your mobile SP (if they have one).
I don't have to start the comm manager to get push mail, it just connects itself, even after a soft reset.
I was asked to start this thread to separate this issue so here goes...
Apparently there is a new comm manager (10 buttons, go figure) that was ported from the trinity to the hermes that when installed on a wizard fixes the wifi connection issues that seem to be occuring. Here is a link to the thread in the hermes forum
http://forum.xda-developers.com/showthread.php?t=301580
there is also a reg key that needs to be updated to get the comm manager to work. Apparently this info is in the 756 page Xplore thread. Mfrazz is tracking down that reg key now.
There is also another reg change that needs to be done that has been "cabbed" in this thread but the change is not persistent until you install the 10 button comm manager
http://forum.xda-developers.com/showthread.php?t=301960
You can add the FlightMode to the green comm manager.
dcdivenut said:
there is also a reg key that needs to be updated to get the comm manager to work. Apparently this info is in the 756 page Xplore thread. Mfrazz is tracking down that reg key now.
Click to expand...
Click to collapse
Its only like 101 pages , but yeah, here's the info that was from Zoki to get this to work on the Wizard:
zoki said:
These cabs are for hermes originally. I've deleted the whole KEY_LOCAL_MACHINE\Software\HTC\CommManager\WLAN key in NBD v4. This should help.
Click to expand...
Click to collapse
So just remove that WLAN key and wait 30 secs or so then do a soft reset and WiFi will work (or it does for me and others that have done this).
Help
I can't get the commManager installed on My Wizard...It keeps telling me unsuccessful. Anyone has same problems??? I think it has something to do with the Xplore WM6 rom I am using. I have had same problem with other software like Photo Contacts Pro. It keeps saying something about certificate invalid or files missing???
djide said:
I can't get the commManager installed on My Wizard...It keeps telling me unsuccessful. Anyone has same problems??? I think it has something to do with the Xplore WM6 rom I am using. I have had same problem with other software like Photo Contacts Pro. It keeps saying something about certificate invalid or files missing???
Click to expand...
Click to collapse
Kill the comm manager process in running programs and try again
ariebart said:
Kill the comm manager process in running programs and try again
Click to expand...
Click to collapse
Soft resetting your device will also work, atleast that did the trick for me.
I have installed the comm manager on my device with no problems in the installation. but the wireless doesn't work anymore. Is there a solution for this problem?
My device is HTC Wizard, my current ROM is FARIA WM6.0
ArafatHegazy said:
I have installed the comm manager on my device with no problems in the installation. but the wireless doesn't work anymore. Is there a solution for this problem?
My device is HTC Wizard, my current ROM is FARIA WM6.0
Click to expand...
Click to collapse
I find a solution to my problem at another post
http://forum.xda-developers.com/showthread.php?t=301580&page=8
Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
noone85 said:
Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
Click to expand...
Click to collapse
I haven´t any problem with wifi on Ranju v7.7.
reinstall the ROM.
Actually that happened with every wm6 roms I have put in the past.
For example ranju's v7,6.
Do you think that this happens because I have the sdhc driver enabled?
Hello again.
I did some research on my Universal and found out that my device doesn't recognise the wifi module.
I ran the IPer, clicked on adapter info and there is nothing there! (Maybe that's because I can't switch the wifi on. I don't know)
Then, I ran wififofum and there is nothing as a device..
Can anyone please tell me what to do? Please, I'm desperate!!!!!!!
Is there any chance that you are using the Battery Status plug-in? I've experienced exactly the same problem (can't switch WiFi on) with both versions 1.04 & 1.05. If yes, just try to uninstall it.
Unfortunately I'm not using this plugin..
The only today plugins I'm using is the HTC Home VGA, Resco today and SMB GPRS Monitor.
I also do not use the overclocking application embedded with the ROM and I have the watchdog disabled.
Any other clues??? Please...
i have the exact same problem, with every wm6 i installed, now i tried the 6.1 and thats no good, my pda is useless without wifi
any ideas are welcome, i dont want to go back to a wm5 rom
anyone found the cause of this behavior?
I can sometimes switch WLAN on, after the "switching on" time, I turn my Universal off, then on, and WLAN works.
I have the same problem. It started with Tomal's 8.2 ROM and I think it could be when I started using SDHC. Another thing happens to me is that even if, in Stenigs-->System, the Performance is set to 624Mhz, when I test it with CPUID.exe the processor is working at 520Mhz.
Has anyone tryed to downgrade to WM5?
I've read that somthing may be erased in the UNI EEPROM that is not reinstalled with ROMs. But I've "no idea" about it.
a lot of ROMs has affect by WiFi issue when You protect with WPA PSK. Please search for thread : WiFi WPA-PSK Workaround and BubbleFix Service (CAB and OEM) - STABLE ( 1 2 3 ... Last Page) and install the cab. WiFi will run perfectly
Thanks for your help but my problem is that the wlan doesn't turn the WIRELESS LAN on, not the ecryption used. Without wifi, the Universal is just a very BIG cell.
I've even tried this WIFIService.cab but it hasn't solved the problem.
does not seem to work for Tomal's latest ROM
Hey Folks,
i recently Flashed my Kaiser with Brand New 6.1 WWE
the http://forum.xda-developers.com/showthread.php?t=439408&page=23
and i'm ok so far. Speed is not TOO fast but everything is working so far except of one issue. Since i'm not using any 3g connection (no mobile internet flat) i used to switch the phone to GSM Mode in order to increase battery life. Unfortunately i can not change this Mode after flashing the new rom. There ain't even a menu item called "band" in which the band can be selected. Anyone got an idea how to fix that problem? Maybe per Reg Hack?
Let me know Guys!
Thanks in advance
nik
You can install Advanced Config Tool v3.3 (first You need NetCF 3.5 installed), run it and then go to Phone, drop the list down and change "Show Band page" to "Yes".
Hey, thanks..but this didn't help
hahahah just kidding! worked well!
Don't worry, you only had to install a diffenrent Comm mananger in order to switch the phone to GSM mode, the ROM i have right now has the same issue, and that works for me. Look into cab's collections in the forum, almost all commanager posted had this functionality.
Good Luck !
He..he..glad to hear that, about comm manager, yeah absolutely You can ad 3G shortcut at the existing comm manager, just, again, open Advanced config, go to comm manager (if it's exist), just select 3G check box.
My brother's AT&T Fuze (WM6.1 latest AT&T ROM 5.11.502.2 WWE) is configured roughtly the same as mine. On his TouchFlo 3D Wireless Manager page, the on/off sliders are in the wrong place and too large. The text vertical alignment is messed up. See attached pic. He thinks he first noticed this after installing .NET CF 3.5 but is not positive. What gives, how can this be fixed?
ermm have u tried reinstalling the ROM then checking it without installing NET CF?
try reinstalling the comm (wireless) manager before performing a hard reset
Check out AssassinsLament's Comm Manager suite w/ Wifi sharing
I realize a hard reset would no doubt fix this problem, but am looking for a way to avoid having to reinstall apps and reconfigure the phone. Perhaps I should have pointed that out in my first post.
try reinstalling the comm (wireless) manager before performing a hard reset
Check out AssassinsLament's Comm Manager suite w/ Wifi sharing
Click to expand...
Click to collapse
That looks interesting and I might use it on my Fuze but I would prefer his phone to stay vanilla. Is there any way to reinstall the comm manager that is bundled into the latest AT&T ROM 5.11.502.2 WWE?