I have WM6 2.02 installed for the last 2-3 weeks, but now I have a problem with the Voice Command. After starting the voicecmd.exe it shows and Error that the voice command has an error. Please restart it.... Any idea how to solve it? How to retsart it?
myname70 said:
I have WM6 2.02 installed for the last 2-3 weeks, but now I have a problem with the Voice Command. After starting the voicecmd.exe it shows and Error that the voice command has an error. Please restart it.... Any idea how to solve it? How to retsart it?
Click to expand...
Click to collapse
Yes use this cab attached .
hello myname70
I had the same problem last week. I fixed it by restoring a backup I had made just a day before or so. Not exactly sure what caused it, but I have an idea it was caused by an older version of MemMaid I was still using. It probably did more damage to my registry that it did good. I've had no time to test that out though...
Maybe it'll help.
Greets.
help me to please
ive installed vc 1.6 but when i get a call it dosn't call the name or number out and it also dosn't read tex messages out.thanks
moh6299 said:
ive installed vc 1.6 but when i get a call it dosn't call the name or number out and it also dosn't read tex messages out.thanks
Click to expand...
Click to collapse
Announcing incoming messages and phone calls is OFF by default.
In fact, all announcements are routed through bluetooth only by default.
You should go look at your settings in the Voice Command control panel applet to customize them to your liking
thanks for replying
hi i have done those settings you talk about but still no luck
Related
Guys,
I have installed and uninstalled Skype and now get the following error everytime I switch the device on:
"Cannot execute \Prgogram Files\Skype for PocketPC\skype.exe"
have queried the registry, have again installed and uninstalled skype but still, the error is there ...
so any other idea, before I have to perform a hard reset?
I have the same problem. I've submitted a support request to Skype today. If I get any useful response, I'll post it here.
Fraser
and you are sure that there are not shortcut in windows\startup ?
to it
yeah - no shortcuts - I tried everything....
installed skype today again (for the 10th time) and uninstalled...
didn't get the errors a couple of times - but after the first soft reset: there it is again..
I don't have a clue....
I had some startup shortcuts wich I wans't sure what they did. As a test, I moved all these shortcuts to another folder, leaving startup empty. After soft reset, the Skype problem persists, so it's not a startup issue unfortunately.
Fraser
Solved
No response from Skype, but from their own forum it appears they've been aware of this at least since last October, but haven't fixed the software release. Skype's great, but I suppose uninstall problems are to be expected from the same people who brought you Kazaa....
Anyway, I solved the problem using this free utility:-
http://www.scarybearsoftware.com/ppc_cn_overview.html
Download CheckNotifications, run it and delete any entry for Skype.exe.
Looks like this app can also speed up machines which may have slowed due to accumulating Notification logs when soft resetting.
I don't get the ntification anymore. I'm relieved as I was on the point of hard-resetting.
Hope it works for you too.
Fraser
skype
hi guy
this happend when you install skype on a sd card so when you erase or uninstall sometime he running to sd card and try to put the skype on track
so please check that you dont have any folder for skype even on your sd card
Hi there,
I am using quite a while the Garmin Mobile XT application for navigating through towns and more... since today I am always getting following error message when trying to start the application "...Data type misalignment at program address 0x03F966C8 in background thread NULL (Main InitInstance)..."
Any ideas, what is the root cause and how to fix this problem??
I am using the application with a HTC Touch Cruise (WM6), the error occured at following version for Garmin Mobile XT: 4.20.50w and 4.20.30w
thanks a lot...
lrt14050
See this thread for solution:
http://forum.ppcgeeks.com/showthread.php?p=334499
-j
I have tryed this solution from pcgeeks and I still got same error. What is the problem?
Did you follow all of the steps exactly as written?? Did you truly clear all of your SMS and MMS messages???
solution
I got the same error on my HTC Touch Diamond and all i did was to delete the MMS's in my inbox. This solved the problem
MMS is the problem
Hi, I'm quite new here.
Had the same problem. Tried to remove newly installed programs (thought of interferring dlls), resets, resored backups... No chance.
And finally "Ricky318i" is right: I also just deletet all MMS on my Xperia.
That just solved the problem.
Does anybody know why?
regards,
gladius
I installed Garmin XT 4.20.50 right after a rom flash. Problems occurred right after I made a restore of my SMS/MMS's with PimBackup. Got this "misalignment" fault.
Solved the problem by just deleting all my MMS's only (search in ALL folders), meaning you can keep all SMS's, and restart the phone. Now Garmin works perfectly again!
However, this is not a permanent solution and just shifting shape of the problem, but what I do is just deleting the MMS's after receiving them and Garmin works again.
Strange.....
Well, installed WIMP today on my HD2, used the setup util to enter the settings, even did a soft-reset of the phone, but: when I send a msg as described in the manual ($WIMPxxxx - where xxxx is my PIN), my device simply tells me it has received a new textmsg and displays this msg. WIMP does not seem to intercept it, and doesn't respond...
Anyone a clue how to get this to work?
I use a similar program, Sprite Terminator, and everytime I try and track my HD2 by sending a GPS command I get no reply back.
Very odd.
Appelsap said:
Well, installed WIMP today on my HD2, used the setup util to enter the settings, even did a soft-reset of the phone, but: when I send a msg as described in the manual ($WIMPxxxx - where xxxx is my PIN), my device simply tells me it has received a new textmsg and displays this msg. WIMP does not seem to intercept it, and doesn't respond...
Anyone a clue how to get this to work?
Click to expand...
Click to collapse
Disable htc messaging...
It appears WIMP is designed to work with windows (poutlook) handling sms, not the HTC messaging app.
Zenyee Disable HTC Messaging (unsure of source) will disable HTC messaging when installed and enable it again when uninstalled.
I'm still looking for a solution so that I can have both... but at the moment I prefer the messaging interface and don't really put my phone down anywhere... so wimp is sitting idle.
Anyone got the problem solved or is there a similar program like wimp?
I find that disabling the HTC messaging has some negative effects on my phone, atleast when I got a new message my notification bar doesn't show it plus HTC messaging automaticly typed first letter in capital and I have to reset sense few times a day 'cause sometimes the green light freezes and blinks to the end of time.
Hi all,
Whenever i get a new text message, the phone does not notify me by ringing ringtone or SMS tone sound or audio alert, nor vibrating the device when there is any incoming text message or SMS message.. This is happening with new ext message or SMS only..
I have checked settings-->Sounds¬ifications. I have checked the play sound option.. Still its not workin..
Please help..
Thanks in advance
Priyank
I have a HTC Touch Diamnd P3490
ROM Version : 1.93.720.4 WWE
ROM Date : 03/16/2009
Radio version: 1.13.25.24
protocol version : 52.62.25.34G
Have also had this problem, everything was working fine for about a year, then the sms notifications stopped. I tried all the settings to no avail.
I reflashed the ROM and all was fine again.
try with:
HKLM\Drivers\BuiltIn\RIL : DisableSMSWakeUpEvent <-- set to "1" by default. Change value to "0"
SMS notification not working
I have the same phone and the same problem. It was working but I have made loads of mods and updates and now it is not working. Cannot find out why.
Tried the reg tweak above but that has not worked. Will try the ROM reflash later and see if that does the trick.
Any further help greatly appreciated as I have not been able to find a definitive answer to this one.
TIA to one and all.
Well I've been through everything I can.
One person suggested installing SPB Phone Suite, restarting when asked, then deleting it and that apparently worked for him - but not for me.
Someone else suggested to change the reg key to disable wakeup on new message. Again that apparently worked for him - but not for me.
So after a couple of hours of research and trying all sorts, I did a full backup with Sprite BackUp then reflashed the same ROM. Reinstalled the backup and Hey Presto! It now works just as it should.
I can only assume in all my playing with new programs and unstalling them, something has screwed up this feature. The clean ROM install has finally done the trick. Hopefully I will not get in trouble any more for "missed texts" which I never heard or noticed.
SOUND AND VIBRATE ON SMS NOW WORKING! PROBLEM SOLVED!
Good luck to anyone else who has this annoying problem.
here are the full reg settings for this sound notification taken from my device
[HKEY_CURRENT_USER\ControlPanel\Notifications\{A877D65B-239C-47a7-9304-0D347F580408}]
"Wave"="\\Windows\\Your Sound.wma"
"AvailableOptions"=dword:0000001f
"Options"=dword:0000000f
"Duration"=dword:00000005
Click to expand...
Click to collapse
I think the sound must be .wma
I always have a 1 indication on my messages even though there is no new message. it goes away when i delete all messages but it returns + the true number of new messages when as they come in. it also shows up in the windows messaging as 1 new in inbox even though there is not. I have soft reset and cannot find a way to erase the damn thing. Anyone else have this issue or know how to help?
Just go to the mail tab click on one of the mail then click the menu option the click on the Inbox. From the Inbox it has several acct. just go thought them and form the mail you haven't read or delete.
it seems to be a winmo issue, i have gone into the registry and deleted the count and it returns, I have no unread anything anywhere and dont even have any messages at all but it always says "Inbox (1)" no matter what...
then try this cab put that in the window reg.
what does it do?
it replaces the internal massages to zero. I got this zip file few weeks ago when I having same issue.
u sure u sent me the correct file, thats not a cab nor is there a cab in the zip file, its a dll...
in any case the .dll does nothing for my problem...
http://forum.xda-developers.com/showthread.php?t=564070
there are posts everywhere, do a search on google if this one doesnt work
worked like a charm, thank you, i must have been mistaken when i thought it was a winmo 6.5 issue because thats when it first happend so thats what i was searching for. Thanks again, awesome little program...