Related
Hi!
I've tried several WM6 upgrades posted in the forum, either the upgrade is unsuccessful or the ROM is not aplied to my phone.
Tried the Kitchen v.2, Core 2 etc etc
I'm sure It's not operator-locked!
Do I have to upgrade the OS, SPL and IPL manually with separate roms?
Please help me!
I want wm6 with as many options (progs) as possible!
Is there any ROM out there that I can apply on my phone?
My phone:
Qtek 9100
WM5 OS 5.0 (5.1.195 Build 14847.2.0.0)
OMAP850-195MHz
ROM-version: 2.17.7.1 SVE
ROM-date: 2/13/06
Radio: 02.61.11
Protocol: 4.1.13.28
ExtROM-ver: 2.17.7.103
If you get Error 300 when upgrading then u have to get rom update utility for G4 (probably) (Look carefully in Core 2.0 thread - the first post, there is G4 Users chapter)
If your rom is not flashed but the process goes to 100% complete then probably you have CID locked device, but anyway let the gurus give their advices.
I'm sure that It isn't CID-locked (if that is the same as operator-locked)!
Nope, CID locked is different than SIM Locked
Ok!
How do I unlock It ?
What I understand one must first identify G# or G4, but how?
The only information I've got is listed in my first post.
/Mike
mostberg said:
Ok!
How do I unlock It ?
What I understand one must first identify G# or G4, but how?
The only information I've got is listed in my first post.
/Mike
Click to expand...
Click to collapse
Read this and all will be explained:
http://forum.xda-developers.com/showthread.php?t=298613
mfrazzz said:
Read this and all will be explained:
http://forum.xda-developers.com/showthread.php?t=298613
Click to expand...
Click to collapse
Great! Thanx!
Hello people.
Yesterday i tried to upgrade my i-mate JAMin to WM6 but i couldn't do it.
anyway, because i couldn't upgrade it to WM6, after i upgrade to 2.40 WWE when i arrived at home i've tryed to upgrade to 2.13_Portuguese_ROM...
Here was when the problem started.
When updrade started, at 1% the problem ocurred... message ERROR.
From what i've read I need a flash ROM, I'm desperate...
Can any one help to find the flash ROM and how to recover my PPC?
Best Regards
Thank's in advance.
(Faria, ajuda-me! sei que podes fazê-lo nem que seja orientando-me em português...)
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Again, would people please read through the forum carefully before starting a new thread and ask the same questions over and over again. It is not that I am mean (just getting old), because any new thread will take time to read. Why not the person who need answer to read first and save other people's time. I found this forum contains so much information that most problems people generally ask are well covered one way or the other.
you may right, but human is talking here, we are not machines, human did mistakes and sometimes even if read it new people hard to get it, they need it step by step
if you don't want to help please don't reply, leave it a lone and it will go to the end with no replies
I've seen a lot of replies like yours witch they are not nice I think they have to be deleted
sorry for beeing rude, but we are human
paradis_pal said:
where did you get 2.40 WWE
you need No Vindor ID to install the ROM
please give your IPL SPL (G3 or G4), what error message?
but your problem can be solve I'm sure, don't do anything you don't know what it is
ask before every step !!!!!!ok
Click to expand...
Click to collapse
Hello paradis, and everyone else.
Thank you for you quick reply and support.
Starting to answering your questions:
- My i-mate is G3
- ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
About the ROM 2.40..., i'm confused and since i can't read my i-mate i don't know the correct version but it was downloaded here in this forum.
Regards
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
What is you SPL Version?
NetrunnerAT said:
What is you SPL Version?
Click to expand...
Click to collapse
this not SPL problem
the arror at 1% is becasue of changing the langauge he just need NO VINDOR ID
that is all
and I want him to unlock CID, please do my steps
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
paradis_pal said:
reinstall the 2.20.7.37 wwe using the NO VINDOR ID NVID
look for RUU_Prophet_220734_2207114_024721_NVID.exe you can find it here
then unlock CID see the WIKI how to
and then install any ROM you want
Click to expand...
Click to collapse
Thank's paradis_pal
My i-mate came back to live, tank you so much.
I fallowed your instructions and the problem was solved.
Best Regards.
As i said, my i-mate is biack to life.
I try to unlock CID, but the link ftp://xda:[email protected]/Uploads/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar is not working.
Can any one put it on working?
NetrunnerAT said:
If he have SPL 3.08 -> CID Unlock doesnt work -> Device report wrong DeviceID and CID ^_^
Click to expand...
Click to collapse
dear net if he has 3.08 the 2.20 will not be installed, I know what I'm writting
but thanks for the advice
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
paradis_pal said:
I think you can find it at pdamobiz.com
but please unlock cid before doing anything
Click to expand...
Click to collapse
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
msylva said:
Hello.
Sorry for responding so late.
Right now my i-mate is Cid Unlocked and working with WM6 Prophet_4.0.0.0.3_PV just fine.
I´m Going to try and explore this (Beautifull) Rom and post my feedback.
Once more thank you for your help, atention and support.
Best Regards.
Click to expand...
Click to collapse
As I said before, the feedback for this rom is just... GREAT.
Better than this only if it was in Portuguese (for me, off Corse), because in these rom theres no Portuguese GPRS configurations.
Regards.
This is the new question I want to ask. (13 Aug 4.37pm London)
As mentioned in the Wizzard-wiki, there is no free way to unlock G4.
BUT !!!!! today, I just did an update (look at my signature). First of all flash the Radio and ExtRom. Then use aWizzard, enable Rapi (e),
UNLOCK CID (u) and last write new OS (w).
In the Unlock CID phase, I finally get something like "your device is successfully CID unlocked" !!!!!!!!!!!!!!!!!!!!! does this mean that my G4 is unlocked and is it the same as we pay 20 pounds to use IMEI number to lock the CID (as mentioned in wiki)??????????????????????????????
The following is the original post.
I am using a CID locked O2 XDA Mini S. It took me about 6 minute to upgrade to TNT4.0, but after that the device rebooted. And then the old wm5 shows up...... (2.21.4.1)
what's going on here?????????????
Please read the wiki before you ask questions.
jacknjill said:
Please read the wiki before you ask questions.
Click to expand...
Click to collapse
Hey, thanks for the reply. Maybe sorry for this naive question.
But I have been reading the wiki many times. Being a foreigner, I don't quite understand many terms and abbreviations in the wiki. After reading the describtion from the TNT 4.0, i know that it is safe to flash it to my O2 MiniS.
But I still don't know why it doesn't work. Here i want to ask 2 questions.
I have read the "how to flash ANY rom to a CID Locked device". 1 question I want to ask is that Any rom includes a rom like TNT4.0, right? I.E. I can flash TNT to my CID locked O2 MiniS, right?
2nd question is that, I noticed that many posts mentioned that they will need an official rom as the base. Where can I find any Official roms for the MiniS. are the following 3 the ONLY OFFICIAL roms for O2 Mini S? I apprecaite any help. Thank you.
O2 WWE OP ID 1.5.4.02 1.10.00 1.12.10 Download Thread
O2 Launch ROM WWE OP ID 1.5.4.02 1.10.00 1.12.10 Download ?Thread
O2 WWE WWE OP ID 2.21.4 2.21 2.07.10 Download Thread
wildcolor said:
Hey, thanks for the reply. Maybe sorry for this naive question.
But I have been reading the wiki many times. Being a foreigner, I don't quite understand many terms and abbreviations in the wiki. After reading the describtion from the TNT 4.0, i know that it is safe to flash it to my O2 MiniS.
But I still don't know why it doesn't work. Here i want to ask 2 questions.
I have read the "how to flash ANY rom to a CID Locked device". 1 question I want to ask is that Any rom includes a rom like TNT4.0, right? I.E. I can flash TNT to my CID locked O2 MiniS, right?
2nd question is that, I noticed that many posts mentioned that they will need an official rom as the base. Where can I find any Official roms for the MiniS. are the following 3 the ONLY OFFICIAL roms for O2 Mini S? I apprecaite any help. Thank you.
O2 WWE OP ID 1.5.4.02 1.10.00 1.12.10 Download Thread
O2 Launch ROM WWE OP ID 1.5.4.02 1.10.00 1.12.10 Download ?Thread
O2 WWE WWE OP ID 2.21.4 2.21 2.07.10 Download Thread
Click to expand...
Click to collapse
You need to use the shell tool to flash to a G4 CID locked device - follow the instructions.
dleeming said:
You need to use the shell tool to flash to a G4 CID locked device - follow the instructions.
Click to expand...
Click to collapse
Does that mean that I can flash any rom to use the shell tool, like I can flash TNT4.0 or Faria etc. ?
The answer to EVERY Question and problem you are having is:
Unlock CID your device!
For Crist sake!
You CAN NOOOOOOOOOT put any rom in your device until you have done that, and no matter whatever anyone else says , just do it, and your problems will go away...
Some poeple just dont do what the instructions tell you to do, and then fill the forum with repeated issues...
t2t said:
The answer to EVERY Question and problem you are having is:
Unlock CID your device!
For Crist sake!
You CAN NOOOOOOOOOT put any rom in your device until you have done that, and no matter whatever anyone else says , just do it, and your problems will go away...
Some poeple just dont do what the instructions tell you to do, and then fill the forum with repeated issues...
Click to expand...
Click to collapse
Man, you scaried me. But there is a post saying that I can flash any rom without CID Unlock, right? Just don't have money to do the cid unlock.
dleeming is right.
According to your signature you have got a G4 model. Follow the instructions in the stickies about upgrade of a G4 model.....
Huckleberry88 said:
dleeming is right.
According to your signature you have got a G4 model. Follow the instructions in the stickies about upgrade of a G4 model.....
Click to expand...
Click to collapse
Understand.
I just want to make sure that in theory I can flash to any roms according to thread "how to flash any rom with a cid locked"
As most of these ROM do not incl. IPL/SPL or the radio you may want to check whether your IPL/SPL and radio version work with the respective ROMs first.
If I remember correctly they require 2.x or higher IPL/SPL. But, check for yourself.
BTW what kind of Chinese support you are referring to?
The best I've used for Chinese support is CE-star specially made for WM6 release from the ppda forums. Penpower works like the transcriber for Chinese.
Monster Chinese, I have never gotten to work correctly. You can't uninstall it too.
jacknjill said:
The best I've used for Chinese support is CE-star specially made for WM6 release from the ppda forums. Penpower works like the transcriber for Chinese.
Monster Chinese, I have never gotten to work correctly. You can't uninstall it too.
Click to expand...
Click to collapse
thats interesting. What do you mean by "ppda forums"?
Some users seem to have no probs with Monster:
http://forum.xda-developers.com/showthread.php?t=314159&page=2
sorry for the OT...
Huckleberry88 said:
As most of these ROM do not incl. IPL/SPL or the radio you may want to check whether your IPL/SPL and radio version work with the respective ROMs first.
If I remember correctly they require 2.x or higher IPL/SPL. But, check for yourself.
Click to expand...
Click to collapse
Thanks mate. Now I've got my new signature. I can show this off to myself now hahahahaha
I forgot the name of the forum, but you can do a search on Leies edition of CE-star.
Idealy, I want to use the English OS system but with full Chinese support. e.g. I can install Chinese software, browse Chinese web-site etc.
But just now, I flashed a Chinese OS system. Quit happy with it now, though maybe later I will try to find a way to fullfill my ideal system above.
jacknjill said:
I forgot the name of the forum, but you can do a search on Leies edition of CE-star.
Click to expand...
Click to collapse
I see. thanks.
wildcolor said:
Idealy, I want to use the English OS system but with full Chinese support. e.g. I can install Chinese software, browse Chinese web-site etc.
But just now, I flashed a Chinese OS system. Quit happy with it now, though maybe later I will try to find a way to fullfill my ideal system above.
Click to expand...
Click to collapse
If you don't need to enter Chinese characters but just have your Wizard to show them, the easiest way would be to install a cab with the Chinese font set.
The cab is somewhere here on the forum...
Huckleberry88 said:
If you don't need to enter Chinese characters but just have your Wizard to show them, the easiest way would be to install a cab with the Chinese font set.
The cab is somewhere here on the forum...
Click to expand...
Click to collapse
Are you sure? I think this thing works similar as PC. Not only we need the font, but the encoding thing (like uni-code or something). Personally, I don't think your suggestion will work. If you find such thread, please do show it to me. It will be highly appreciated
Cheers
I am using it that way. Haven't check Chinese websites but chinese SMS and the menu of the SIM card are shown in HanZi.
check for the fontpatch.cab
or start here:
http://forum.xda-developers.com/showthread.php?t=237858&page=4&highlight=fontpatch
especially post no. 39
Cheers!
Can anyone advise me which wm6 rom update is suitable for my O2 xda mini I have tried 2 on the forum but got the message invalid update wrong RUU?
Any of them should work....
You gotta know if you have a G3 or G4 first. Check out: http://forum.xda-developers.com/showthread.php?t=284292
Let us know, then we can better advise.
My Ipl is showing 2.21.0001 at boot up?
That is a g4.Same as mine, and a fellow norn iron chap lol
I used imei-check site to pay for an unlock, then just use a rom that only is a os or extrom with no ipl or spl, most of the wm6 ones are like this. Or use a kitchen to build your own, plenty of tutorials about
Many thanks, just paid for the unlock and now waiting for the code
I have a locked tmobile mda... I forget what I need to do b4 I can flash a new rom... I think all I have to do is CID unlock it right? But I forget how. Any help would be great
why not to read "sticky" threads on the top!!!
cgigate said:
why not to read "sticky" threads on the top!!!
Click to expand...
Click to collapse
Yes the fastest one way to figure this out again is to read the stickies labeled unlocking and UPGRADING. That is usually pretty helpful.
help wanted
dharvey4651 said:
Yes the fastest one way to figure this out again is to read the stickies labeled unlocking and UPGRADING. That is usually pretty helpful.
Click to expand...
Click to collapse
hi ive tryd to up to wm6 but no luck ive read all the info on how to doit downloaded loads of software still no good ive managed to put wizard love rom on it for now but cant get round the cid unlocking then how to up aput wm6 on
ive tryd it but dont want to kill the phone could some one make an ruu of wm6 then upload it or dont it work that way
any help would be great please and thank you
device info
mda vario
rom ver 2.26.10.2 wwe
rom date 6/7/06
radio ver 02.25.11
protocol 4.1.13.12
ext.rom ver 2.26.10.105
i just started going to this forum and I'm just looking for a way to get WM6 on my MDA. I know there are some posts here but I don't understand a lot of this flash rom things? Could someone help me ain directing me to a trustworthy post on how to upload WM6 on my MDA? thanks!
read the stickies...
especially
How to flash a new ROM to your Wizard... a little tutorial!
VWGolf2.OHH said:
i just started going to this forum and I'm just looking for a way to get WM6 on my MDA. I know there are some posts here but I don't understand a lot of this flash rom things? Could someone help me ain directing me to a trustworthy post on how to upload WM6 on my MDA? thanks!
Click to expand...
Click to collapse
Which is your device, a G3 or G4,how come we can tell,untill and unless you do not post the vital data of your phone,no one can suggest you any help without knowing the version of your phone.always post the data.
Well 'trustworthy post on how to upload WM6 on my MDA?',why ?,do you think what all is posted here in this Forum is not Trustworthy.
Very rightly said by moseslin 'Read The Stickies',you'll find all the answers here, just "Help Yourself"
bill4676 said:
hi ive tryd to up to wm6 but no luck ive read all the info on how to doit downloaded loads of software still no good ive managed to put wizard love rom on it for now but cant get round the cid unlocking then how to up aput wm6 on
ive tryd it but dont want to kill the phone could some one make an ruu of wm6 then upload it or dont it work that way
any help would be great please and thank you
device info
mda vario
rom ver 2.26.10.2 wwe
rom date 6/7/06
radio ver 02.25.11
protocol 4.1.13.12
ext.rom ver 2.26.10.105
Click to expand...
Click to collapse
which DOC chip version you got,a G3 or G4 ? to verify post your IPL/SPL...? or download the WST Tool,install and run it and post the report to determine if it's a G3 or G4 device.You can download the WST tool here :-
http://forum.xda-developers.com/showthread.php?t=329170
If it's a G3,it's required to first CID unlock the device and than upgrade to wm6.
How to CID unlock,check this guide here :-
http://forum.xda-developers.com/showthread.php?t=285435
http://forum.xda-developers.com/showthread.php?t=263116
But if a G4,read here how to upgrade :-
http://forum.xda-developers.com/showthread.php?t=329147
Good luck