i haven't been able to get the net via active sync after switching to wm6. every single rom. is it possible? whats the deal? i'm using the same settings that worked for me before.
yeah, I know what you mean.
seems like Wm6 acts differently from Wm5, surfing and updating weather and news rss only works with wifi and your cell phone internet provider. But not with your pc internet, been trying to adapt to this change, unless someone knows how to change it's setting to be like wm5
Why is this a problem. I only plug in my PDA's to flash new roms on them. If I am at my computer what is the point of surfing the net on the PDA? I actually like this better because the PDA does what it normally does when not plugged in. This is better than WM5. Setting up Exchange 2007 tomorrow. Can't wait to use the new WM6/exchange 2007 features of wireless active sync, bye bye 2003.
computer9cowboy said:
Why is this a problem. I only plug in my PDA's to flash new roms on them. If I am at my computer what is the point of surfing the net on the PDA? I actually like this better because the PDA does what it normally does when not plugged in. This is better than WM5. Setting up Exchange 2007 tomorrow. Can't wait to use the new WM6/exchange 2007 features of wireless active sync, bye bye 2003.
Click to expand...
Click to collapse
i really didnt want your opinion. i just wanted to know if it can be done.
hiimcliff said:
i really didnt want your opinion. i just wanted to know if it can be done.
Click to expand...
Click to collapse
Good point! Sorry, Have we determined that it is actually a WM6 problem or is it Active Sync 4.5?
This has been a known problem since AS 4.2 (or 4.1, i forget). Try modifying the following registry setting (on you PC):
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
When i flashed wm6 i had to do the above reg setting again.
http://forum.xda-developers.com/showthread.php?t=271119
That was the problem i had, sorry if its not what your looking for.
Mine works ... I am using mUn 's aRTM
That's not important dough.
In Settings/Connections/USB to PC , disable it.
That does the trick for me. It's possible a need for soft reset
Set your Connections to My Work Network
And in Active Sync in PC , at Connection Setings , select This Computer is conected to "Internet"
That should do the trick
Good Luck
I'm using RUU_mUn_aRTM_10_2_0_8_WWE ROM and I don't have problem surfing the net with my laptop. I used active sync 4.5.
Hope it'll help ...
ladude626 said:
This has been a known problem since AS 4.2 (or 4.1, i forget). Try modifying the following registry setting (on you PC):
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
Click to expand...
Click to collapse
thanks... that worked.
funny i searched for the fix and didn't find it
Can someone make a cab with this setting please
hiimcliff said:
thanks... that worked.
funny i searched for the fix and didn't find it
Click to expand...
Click to collapse
golfernutnflorida said:
Can someone make a cab with this setting please
Click to expand...
Click to collapse
when i get off of work ill do it
This has been a problem with me with every version of Wm6. I have to go into the network settings and swap all the settings and then go back and change everything back to "work"...Its a very annoying problem.
golfernutnflorida said:
Can someone make a cab with this setting please
Click to expand...
Click to collapse
You don't need a cab for this since this registry setting is for your PC, not your phone. Just copy and paste it into a txt file and save it and rename it .reg and execute it.
ladude626 said:
You don't need a cab for this since this registry setting is for your PC, not your phone. Just copy and paste it into a txt file and save it and rename it .reg and execute it.
Click to expand...
Click to collapse
i assumed thats what he meant.
hiimcliff said:
i haven't been able to get the net via active sync after switching to wm6. every single rom. is it possible? whats the deal? i'm using the same settings that worked for me before.
Click to expand...
Click to collapse
I just tried this out of curiosity, but I can get an connection using the Internet Explorer on the MDA using an USB connection, first try, no changes made to the device.
Faria's WM6 rom and ActiveSync 4.5.
If you are looking to get some other connections working let us know what they are.
/delajt
Related
I just upgrade with the last AKU3.50 with HimaUpgradeUt_noID.exe and now i cannont synch but i can install aps...
By the way i use DOC tools to upgrade the storage to 30 Mb
If anyone have an idea, let me know
Thx
Whats your activesync version?
I'm on 4.5 beta
an di got the error => Support code 80070057
I try :
- changing my ROM => nothing
- changing my Radio => nothing
So actually i'm under AKU 3.50a.32 WWE with Radio 1.19 and 30 Mb of storage (using DOC tool).
Could I have done something wih the Disc On Chip ?
NB : I use Office 2007, it work before with my old 2003 ROM.
After, I upgrade so i force with HimaUpgradeUt_noID.exe and the progs wont install temselves...
So i change the ROM again, the Radio...progs install works but the synch can't be achieved
Don't hesitate to curse me for 3 generations
I think the problem isnt on your device buth rather on you computer..
Why dont you try to make another user on your computer then try to sync it there..
Lets see what will happen
back in 5 minutes with the answer...
It isn't my PC, it's my device...
So is there a hard hard reset ? or do i try to be back to an old 2003SE or anyone could me what I do wrong with my Hima .
do you have an application that actually closes programs? if yes, try to set activesync.exe as an exception.
I got a task manager but i dont see what you want to do
Trying to tell my firewall or toher that active sync is good for me ?
=> It's the case because it was working fine before
Trying to close the prog on my device ?
=> Haven't a activsync.exe just en repllog.exe with the activ sync icone.
Well well well, i'm so fu**** confused
Back to old 2003SE and it works... Geez !
tried looking up the error code?
http://www.google.dk/search?hl=da&q...7&btnG=Google-søgning&meta=lr=lang_da|lang_en
I have the very same problem, since i've cook a new rom aku 3.2 w/ 24Mb of pagepool. I've noticed that i can't delete or modify any file in the root folder, but using resco explorer. So i guess that my root folder for a reason i don't know, is write protected. My hima didn't sync with outlook, using any versior of ActiveSync at home and work (before the new rom, it works pretty fine), but it gets connected so i can use internet... So any of you guys can tell me how to solve my problem?
It would be very appreciated
I have the same problem,so i did backup my Data directly on the Himalaya Device und copied it over the WM5 Storage tool,its a small run in a Circle but
its functional ,You can Install Apps too,because you can choose now (thanks to WM2k5)where the
Apps are going to copied..
I do the same thing, but i really need to sync with mi outlook at home and work, so that back up don't solve the problem.
The problem is 100% in your PC. I discovered this when I notice that my laptop sync ok but want sync with my desktop. I done everything under the sun to make sure my disktop mirro image of the lapttop but nothing works.
Then at last I discovered that it works when I UNchecked the settings on the device (USB to PC) to disable the advance network functionality.
I suggest you delet active sync first and re-install it then reboot..
Good luck.
forget to mention both laptop and desktop XP, and device is XDA2 with AKU3.5
I think better use the fix version 4.2 not beta 4.5. It could be there is some bugs in the software.
Is this just an email sync issue, rather than just comms?
Do you use Exchange server?
Try this:
On the Exchange server, launch Internet Services Manager. Right click on the Microsoft-Server-ActiveSync virtual directory and choose Properties. Select the Directory Security tab. Click the Edit button in the Secure Communications section and select the option to “Ignore client certificates.”
http://forum.xda-developers.com/showthread.php?t=299950
Can somebody please cook this in in a wm6 Rom!!! This is a great breakthrough At last, my waiting is over
It's already in many WM6 roms (like Xplore 1.1). If it isn't in yours you can install the cab from that thread.
Userfriendly sertup menu, possible?
Isn't there a way to make this option user friendly? It would be great if some of the genius wm6 cooks could manage to make a nice GUI for this function!!!
There has to be one of those gurus that are willing to implement this functionality "straight out of the box"!!!
nordviks said:
Isn't there a way to make this option user friendly? It would be great if some of the genius wm6 cooks could manage to make a nice GUI for this function!!!
There has to be one of those gurus that are willing to implement this functionality "straight out of the box"!!!
Click to expand...
Click to collapse
The only thing you have to do is:
1.: take the _setup.xml
2.: put your sip settings into the filds (like _password_)
3. make a cab file with cabarc
4. install settings to xplore 1.1
5. Enable Internet telefone when available
-- and you did it!
could you just give to me this cab file i have some pb with cabarc
bowow said:
could you just give to me this cab file i have some pb with cabarc
Click to expand...
Click to collapse
No I cannot - because this are all my settings with password, sipclient and so on.
Just tell me the problem.
For me: I had to try severel folders to put the _setup.xml -> so I tried in cabarc main, then in "include" and so on. suddenly I had the .cab. I think the xml has to be in the mainfolder. Then you got to promt and type "cabarc N settiings.cab _setup.xml" and it done.
I've looked all over and can't get a search to find what i'm looking for....
Is there some kind of reg edit that will turn off the "no phone signal" blip you get with motorola bt headsets? It's annoying when i'm using my Wizard for VOIP or another use. When I turn my phone off, it also seems to turn off my VOIP phone. I think the easiest thing would be to just turn off the no phone status audio notification i get with both my H300's & HT820's. Hopefully someone knows of a prior post or how to do it. Thanks
How can it usb2pc popup work on other devices besides raphael,diamond? From wa I see somebody mentioned that it needs to be hex editted and someone did it on kaiser and trying to get it to work on athena to be cooked in.I have zippys newest cab from diamond forums.Any help / step by step is appreciated.
i have no idea what you just said.
but if you're looking for a usb2pc you can use no2chem's nuemassstorage.
nir36 said:
i have no idea what you just said.
but if you're looking for a usb2pc you can use no2chem's nuemassstorage.
*
Click to expand...
Click to collapse
No,im trying to get zippys usb2pc popup app for diamond to work on htc athena.Ive read somewhere that it needs to be hex editted to work on other devices and ive seen it for kaiser.What I wanna know is how to get it working on athena so it can be cooked in a rom.
Sorry for misunderstanding!
Wa I mean by usb2pc popup is the program/service on diamond that asks if I want to start internet sharing,activesync,mass storage when you attach device to pc via usb.
*
D1ab70 said:
No,im trying to get zippys usb2pc popup app for diamond to work on htc athena.Ive read somewhere that it needs to be hex editted to work on other devices and ive seen it for kaiser.What I wanna know is how to get it working on athena so it can be cooked in a rom.
Sorry for misunderstanding!
Wa I mean by usb2pc popup is the program/service on diamond that asks if I want to start internet sharing,activesync,mass storage when you attach device to pc via usb.
*
Click to expand...
Click to collapse
i got it working just fine on the kaiser cooking it in without hex editing it
I've attached the package I'm using.
good luck
Thx Bro,
Since this from opal (non vga),will this work fine on vga devices such as athena in terms of displaying correctly?
D1ab70 said:
Thx Bro,
Since this from opal (non vga),will this work fine on vga devices such as athena in terms of displaying correctly?
Click to expand...
Click to collapse
no, the pictures will be realllllllllllllly small to see.
you need one from touchpro or diamond.
i have it in a package file but i am not at ho,e right now.
i will post soon for you to have.
so i assume it'll work on polaris huh?
try this it is in package form
herg62123 said:
try this it is in package form
Click to expand...
Click to collapse
Thx herg, will give this a try!
mbarvian said:
i got it working just fine on the kaiser cooking it in without hex editing it
I've attached the package I'm using.
good luck
Click to expand...
Click to collapse
what file is that?
does it mean after the installation of this cab, every time when i connect ppc to any pc there will be a balloon pop up to ask me if i want to connect my ppc to pc as mass storage, active sync and etc?????
or must it have active sync installed?
Hi All,
I am wondering if this will work on Vogue? I am on NagROMs 6.5.1 Build 23054.
Thanks,
Apurv
On my Hermes I used to be able to kill activesync with the task manager. With the new Topaz, task manager never displays activesync.
How can I get it to show activesync so I can kill the process without a soft-reset?
For what it's worth, the reason I need to kill activesync is because of a bug in the way it handles DNS. If I plug my phone into my desktop then it switches to the USB connection for activesync and correctly detects that the IP address for my exchange server is different (ie it's an internal IP). Unfortunately, when I disconnect from my desktop it never seems to realise this and continues to try and use that internal IP (or atleast that's what I think is happening). Killing both Messaging and Activesync solves the problem and I've been using this for nearly a year with the Hermes but I can't do it with the Topaz.
My Hermes was running a cooked wm6.1 ROM while my Topaz is currently running the stock HTC wm6.1 rom.
Cheers,
James
All stock ROMS have this behavour. If you know how to HARD-SPL and then flash another ROM I would suggest using the Topaz Essential ROM (it is the most stockish, stable and fast ROM I used) and after that using the fake server method for activesync.
Good luck and tell us what it worked for you!
no need to flash rom there is simple solution:
in HKCU\Software\HTC\TaskManager\ExclusiveList\System
written all proccesses that task manager don't show, delete what you want to be shown and soft reset.
activesync proccess is replog.exe
Annoying stock ROMs
shumilica said:
All stock ROMS have this behavour. If you know how to HARD-SPL and then flash another ROM I would suggest using the Topaz Essential ROM (it is the most stockish, stable and fast ROM I used) and after that using the fake server method for activesync.
Good luck and tell us what it worked for you!
Click to expand...
Click to collapse
Thanks Shumilica,
I wondered if it was a stock ROM related issue, but I figured that if the cooked ROM's could work around it then there must be a registry key or something that would allow me to do the same. I'm sure I'll end up installing a cooked ROM, as I have on my last 2 HTC phones, but since the phone is literally brand new I'm getting used to the stock ROM before I start messing with it.
I'll let you know how I go. BTW, I assume the fake server option is no use to me since I USE an Exchange Server and have it regularly syncing?
Cheers,
James
Un-hide Activesync from Task Manager
bnm7bnm said:
no need to flash rom there is simple solution:
in HKCU\Software\HTC\TaskManager\ExclusiveList\System
written all proccesses that task manager don't show, delete what you want to be shown and soft reset.
activesync proccess is replog.exe
Click to expand...
Click to collapse
Thanks bnm7bnm,
That did the job perfectly. I couldn't find this solution with search so hopefully the title helps someone else now.
Thanks again,
James
title definitely did the trick as I just found this easily
In my case on the touch pro, the stock ROM i had was showing activesync in the HTC task manager, but after flashing Energy 6.5 ROM on there ActiveSync was not being shown. I like to use the TaskManager to switch to it so i can see the synchronise progress etc and was easily able to find this thread and make the registry tweak
I use CleanRam, and you can clean (stop) hidden programs using the Custom process function.
bnm7bnm said:
no need to flash rom there is simple solution:
in HKCU\Software\HTC\TaskManager\ExclusiveList\System
written all proccesses that task manager don't show, delete what you want to be shown and soft reset.
activesync proccess is replog.exe
Click to expand...
Click to collapse
Thanks for the good info.
Does Anyone know if this is possible, i would like to enter my movie or musicfolder so i can copy whatever i want over to my phone BY WIFI (ADDED LATER) have tried to search the database and came up with something i another phone thread
but i could not make this to work. Anyone know if there is an app or something i could use.
i have a HTC HD2.
i have found a lot of nice things on this place, but nothing abouth windows networking. maybe im wishing for too much. but!!! i hope
Rgds Erik
Hi, did you try using ActiveSync or Device Center to connect to your HD2, then clicking explore on ActiveSync or Device Center and then copying your files into your phone?
Networksharing
Ok, i did not write that i ment by WIFI. sorry, other ways like activesync work. but thats not what i want
Bassibil said:
Ok, i did not write that i ment by WIFI. sorry, other ways like activesync work. but thats not what i want
Click to expand...
Click to collapse
How about this?
http://www.julien-manici.com/windows_mobile_wifi_remote_access/
googd suggestion.
Hi and thanks for tip. i have already seen this, but its browsing the wrong way.. I want to browse the COMPUTER, not my phone
The next best thing I can think of is if you purchase an application from the Resco Software company. Resco Explorer will allow you to map your network drive on your device. It includes a host of other features that the stock explorer doesn't which will make file management much easier. I highly recommend it to everyone.
http://www.resco.net/pocketpc/explorer/
i got the soultion..
the good old Total commander finally worked, and now i can browse my server.. nice. thanks for all help guys.