Database Info

WM5 phone Profiles small & crisp

I have extracted this phone profiler from O2 plus 2.3. It is a very small signature (50kB) and very crisp program. I hope you shall find it useful....
It is a cab file. Just remove .zip and use it as cab file...
regard
c_shekhar

Just install, so what next for me to see or setting this profile. Sorry if my question look stupid. Thanks, i'm goi it after soft reset & actice the sound profile in today menu. Great job. This easier for me to switch to any profile when require. No need phonealarm at all. Again Well Done.

@zaidam
Have you used it with wisbar desktop? Is it working fine??

@c_shekhar,
Thanks for great job. It working prefectly.

not working on TREO 750 !
for some reason I cant see the plugin on the today screen
help anyone ?

peergil said:
for some reason I cant see the plugin on the today screen
help anyone ?
Click to expand...
Click to collapse
Install it on main memory instead of storage card ot RAMDisk..

Restore Internet Calling in Faria's WM6 ROM?

I have been attempting to add Interenet Calling to Faria's WM6 ROM by adding the necessary files and registry changes and re-cooking the ROM but I am getting nowhere fast. I have managed to add some files to the original ROM, make a couple of registry changes fine and change some settings in the initflashfiles.dat file to remove some shortcuts I don't want and I can get this to work fine, however re-adding the IP Phone stuff is a bit more of a task.......
I have extracted the files (or modules) from the MB ROM and added the regsistry changes and the ROM cooks just fine. When I flash the Wizard though it completes sucessfully and then reboots. I get the 1st splash screen but then when the 2nd splashscreen should appear I get a white screen. The Wizard is working as I can hear the bleep when it asks you to 'tap the screen to set up the device'. It also powers on and off OK, but I only ever get this white screen.
I have tried this about 4 times now and I am convinced the registry changes and required files are correct, but each time I get this white screen. Any ideas?
Andy

http://forum.xda-developers.com/showthread.php?t=290786
Read this... especially towards the end.

trojan9x said:
http://forum.xda-developers.com/showthread.php?t=290786
Read this... especially towards the end.
Click to expand...
Click to collapse
Already read it..... I can get Internet Calling back if I launch the VoIP.CAB that is included in that thread after installation, however I want these to be integrated into the ROM like they were originally (Faria has removed them). As I said I have had some sucess with adding other files and other registry changes it is just this bit that I am stuck on.
I did manage to get a bit further but ended up with a corrupt Today screen, no idea what happened there though
Andy

What are you stuck on?... you said you didn't have it, but now you said you can get internet calling... what exactly are you trying to do?

Faria has said that his rom takes up almost the entire space alotted. Have you tried removing some files from the rom to clear up room for the VoIP files?

trojan9x said:
What are you stuck on?... you said you didn't have it, but now you said you can get internet calling... what exactly are you trying to do?
Click to expand...
Click to collapse
I want to restore the Internet Calling option in Faria's WM6 ROM - pretty simple to understand really
I can add it manually via the VoIP.cab file but this obviously takes up RAM and can be removed via 'Remove Programs'. I would like to add the files that are missing and make the necessary registry changes then re-cook the ROM. I would prefer to keep Faria's base ROM.
I haven't tried removing anything from Faria's ROM so far, I didn't realise it was near the limit - I thought we had 128MB to play with on the Wizard, are we near that already?
Andy

Listen.. that cab only does registry fixes and puts in the NECESSARY files for the current voip functionality. it does not install anything that is not needed. Extract the cab and look at the xml file. it will tell you exactly what it does...Pretty simple concept

trojan9x said:
Listen.. that cab only does registry fixes and puts in the NECESSARY files for the current voip functionality. it does not install anything that is not needed. Extract the cab and look at the xml file. it will tell you exactly what it does...Pretty simple concept
Click to expand...
Click to collapse
Yep, already done that, hence my original post.....
I have added the necessary registry changes/additions and proof-read them several times, however once the ROM is cooked and installed the thing reboots, I get the 1st splash screen OK, then the white screen when the 2nd splash screen should appear and that's it.
I will have a look at how bloated the DUMP directory is with the additional files in there and see if I am going over 128MB.
Andy

The DUMP folder is apparently 122MB (128,512,401 Bytes) but is taking up 132MB (139,141,120) on the disk on my PC. Does anyone know if this is too big? If it is what is safe to remove?
Thanks
Andy

Done it.......
If anyone is interested I managed to get Internet Calling back into Faria's ROM.....
What I did originally was correct, however the file (or modules) that are needed for Internet Calling total about 3.5MB, which I think was slightly too much and would make the ROM bigger than 128MB (I think Faria must have realised this when developing his ROM and removed them to save space). I have been through the installed applications and files and have removed some stuff that I don't use. I then re-built the ROM and low and behold it worked first time and Internet Calling is now an option...
It still doesn't work however but that is just because it needs a provisioning XML file from a provider. Hopefully when WM6 devices appear we will be able to extract a provisioning XML file and dig deeper........
And no, the ROM is not available since this is Faria's work and not mine.
Andy

Nice,
I’m new to this and the only thing that I need from WM6 is the “Internet Calling”
I have no ides how to make the voip work. But I fond this at Microsoft.
http://msdn2.microsoft.com/en-us/library/ms898226.aspx
I really would like to test this with my “asterisk server” (http://www.asterisk.org/)
/joad

Where did you find the "Internet Calling total about 3.5MB" module?
Or maby you have changed your mind and feel like chairing your ”build” of WM6

joad said:
Nice,
I’m new to this and the only thing that I need from WM6 is the “Internet Calling”
I have no ides how to make the voip work. But I fond this at Microsoft.
http://msdn2.microsoft.com/en-us/library/ms898226.aspx
I really would like to test this with my “asterisk server” (http://www.asterisk.org/)
/joad
Click to expand...
Click to collapse
I have exactly the same intentions, joad. I've got wm6 on my O2 XDA mini so I can try and connect to my Asterisk server as well!
Let's hope his eventually works.
N

joad said:
Where did you find the "Internet Calling total about 3.5MB" module?
Or maby you have changed your mind and feel like chairing your ”build” of WM6
Click to expand...
Click to collapse
You need to add the following files into the ROM (the 1st 3 are actually modules and are in directories with the same name):
dnsapi.dll
rtcdll.dll
voipphonecanvas.dll
ipdialplan.xml
ringback.wma
You also need to add the registry entries to the default.hv and user.hv that are contained in the '_setup.xml' file from the VoIP.CAB file (or extract them from another ROM that already contains Internet Calling).
HTH
Andy

joad said:
Where did you find the "Internet Calling total about 3.5MB" module?
Or maby you have changed your mind and feel like chairing your ”build” of WM6
Click to expand...
Click to collapse
Joad,
I agree with you. The 3.5 Mb footprint is inflated.
It's only 1.75 MB (remember if you are using recmod when you are unpacking the ROM with viewimgfs, you have two copies of the files that are stored as modules: the module version and a file copy!.
--eluth.

eluth, I knew that somebody out there would have done the right job. Congratulation! Would you mind making your rom available to us?
Thank you
Gio2003

Pleaaaaaaaaaaaaase !!!!!!
There are so many people wanting to do this now - and I have a MAJOR need for this on a Hermes -- I have a solid SIP provider and can get to it with my other apps but integration I can't test ---
I am trying soooo hard to pin this down. I have not found a single ROM yet that has the "complete" add-in of what you mention here.
It would be GREATLY APPRECIATED.
Thanks
gio2003 said:
eluth, I knew that somebody out there would have done the right job. Congratulation! Would you mind making your rom available to us?
Thank you
Gio2003
Click to expand...
Click to collapse

ckolibab said:
There are so many people wanting to do this now - and I have a MAJOR need for this on a Hermes -- I have a solid SIP provider and can get to it with my other apps but integration I can't test ---
I am trying soooo hard to pin this down. I have not found a single ROM yet that has the "complete" add-in of what you mention here.
It would be GREATLY APPRECIATED.
Thanks
Click to expand...
Click to collapse
This .CAB worked on my Wizard with Faria's WM6 real thing ROM that had the VoIP stuff removed:
http://forum.xda-developers.com/showpost.php?p=1147821&postcount=138
I then added the files and registry settings back and re-cooked the ROM.
HTH
Andy

(from O2 XDA Zinc) wireless today plugin that shows data status

I came across, on another forum, a today plugin pic.
The poster in fact, was posting the cabs for activating VoIP on Wm6 roms.
Cabs mostly from Xda.
But what impressed me the most, was a capture of his today screen.
He has the regular 'wireless' plugin showing the status and name of the three typical connexions: GSM, Bluetooth and Wifi.
But his plugin was showing also the status of his DATA connexion.
(I guess GPRS, EDGE, HSPDA etc.)
Any one knows where I could find the cab or the registry tweak to add this feature to the basic wireless plugin?
OK I finally got more informations, it's part of a today plugin and commanager from O2 XDA Zinc.
Any one who have access to this phone could help providing the following?
- Which registry values are present on that phone in this area:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Today\Items\"Wireless"]
- has any one got the installation cab of that plugin?
It would be great to see the _setup.xml file, maybe the tweak is there
- any one can send me the "netui.dll" in the windows directory of that phone, so I can try to run it see if that helps showing the 'data connexion status'?
Cheers

Well, 64 viewers and still no one knows about it?
1) has any one seen this wireless today plugin before?
2) has any one used it before?
3) does any one know about a registry tweak, a cab or a dll that displays this additional data connexion status?

I have it on my TyTN...sorta.
It looks just like yours with the WiFi and Blutooth, but not the Data part of it.
The registry tweak is documented in the Wiki. That's where I found it

You did not get my point
Thanks for the reply, I thought every one got scared away by the question...
Yes, I already know the registry tweaks and I also got the cab for what I called the regular/typical wireless plugin (operator name, wifi status, bluetooth status).
My point is: how about the DATA status (gprs, edge, 3G)?
Does any one know how to add this fourth information into the wireless plugin?

I updated the first post and the title with new informations
Its all about the O2 XDA Zinc phone
Could some one be kind enough to provide the following informations:
- Which registry values are present on that phone in this area:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Today\Items\ "Wireless"]
- has any one got the installation cab of that plugin?
It would be great to see the _setup.xml file, maybe the tweak is there
- any one can send me the "netui.dll" in the windows directory of that phone, so I can try to run it see if that helps showing the 'data connexion status'?
Cheers

This is actually a very intersting find. Data indicator is what always turned me away from that plugin. It'd be very interesting to find out more, unfortunatley a lot of Googeling got me nowhere and without the device in possession I feel like I have not much more to offer.
Anyone else?
//Nik

Yeah, I made some more findings, thanks to the guy the screen-shot came from...
The registry keys seem to be quite similiar EXCEPT the fact that this wireless plugin doesn't use netui.dll, it uses a dll called: WirelessManagerToday.dll
I put that dll onto my system and tried to get i working but it didn't.
It did not give me any error, but it just displayed nothing...
So what we need now, it's an installation cab of the O2 Xda Zinc Wireless Manager or something like that, to see if there is another file involved in this process (an .exe file or whatever)
And to know if there are other settings apart that registry link to that particular dll.
Any one using O2 phone can answer?

hi there fancy meeting u here
the thing is o2 zinc comm manager is different from HTC one ... as the attachment below. Also a shot of the dll ... the string value of the dll show a Wireless Manager. Zip file contains the WManager.exe & also the dll
Hope this help

Hi mate.
The world is not that wide, when we use the same nick everywhere!
;-)
I tried to send you a mail with some useful stuffs to unlock your extendedrom, but every mail failed, maybe a problem of anti-spam filter.
I post here below the applications from this site and others. Give it a try...

cheers mate
well i ll try this one ... sad to hear that u cant use the plugin yet ... keep trying mate
BTW o2 zinc is made by Asus ... not sure if a htc unlocker can unlock the ext rom ...

Hope you can unlock your extended ROM and find some useful cab related to the Wireless Manager install.
I don't like to give up, but the fact is I don't know toward which direction make the next move...
When you have time, would you make some automatic search in your registry to make sure there is no other references to those dll and exe or maybe some other components of the whole wireless system. Thanks.
Yeah, I know the manufacturer is different, but It's still the same Windows Mobile system, there might be some bridges between them.
Cheers

i only have the update rom frm o2 only now ... i cant extract the exe file ... it only show error ... maybe you can teach me how to do a rom dump maybe than it can be some help to you

i have tried compiling a cab file with both dll & the registry using wince cab manager ... hope it can work
:fingercross:

2 QUESTIONS :Cooking with purchased Apps - Manilla 2d Landscape Ability

Hey guys, I have a quick question.
Is it possible to have the unlock codes of purchased applications already in the cab when I'm cooking it?
So I don't have to do input them every time I make an adjustment to my rom.
Unfortunately I won't be sharing the rom... I have a conscience.
2nd Question...
In abusalza's PDACornerUltimate.V10-20931
The Manila 2d Has a landscape mode that "somewhat" works, is this a personal fix or is it included in the lastest Manila 2d Cab?
Thanks Everyone

As for your first question, it is possible but time consuming and tricky. What you'll have to do is find out where the key goes when insterted in the program into the registry (there are programs to see how the registry is altered after a certain move). After that, you'll have to insert that key into the CAB (probably better to do it before making the OEM) which you'll have to use something like WinCE CAB manager. This can be done to most programs and games, not all though.

would I be able to create an OEM out of the program files in my phone, it wouldn't be cab?

Metallic-Force said:
would I be able to create an OEM out of the program files in my phone, it wouldn't be cab?
Click to expand...
Click to collapse
No, i've never seen that nor do i think it's possible. I really wanted to do the same thing, however going through many threads and asking so many people about it, i figured it was easier to manually register everything.

Ok great, well that's one down.
Thanks alot Kareem.
Anyone wana take a shot at the other question?

Use Sashimi auto Installer for REG files.
fire use PHM to make a backup of your REG
then register
use PHM again
use find the adjusted REG edits using a REGistry comparer
put the REG files into Sashimi, read up on SAshimi to set it up. and his website has more info on how to do exactly what i said above. incl video
it took me all of 3 hours to learn sashimi and its great..
As for the Second Question, Ask in the thread concerning it.
ive not seen it in the HD3 Releases Im using.

I'm doing that right now.
Another Question.
Do I have to back up my registry from my cooked rom, or can I back up my current rom that has all the applications installed and registered.

kareem9nba said:
.... What you'll have to do is find out where the key goes when insterted in the program into the registry (there are programs to see how the registry is altered after a certain move)....
Click to expand...
Click to collapse
Can you name what the program is? please, i'm interested in this. Thanks.

[REQ] Comm manager

made a search but didnt come up with what I wanted...
what I'm looking for is the comm manager with 3G --> GSM mode among the options
I had it on my topaz, but I'm not quite sure which chef used it, if it was Dutty or some of the other 6.5.1 ROMs
thanks in advance

haven't found anything yet, but making a shortcut to CMBandSwitch from /windows folder seems to work for now

You don't need a comm manager. You can put the 3G option in the default one using Advanced Config. I did that (I like that option too) and it works like a charm. You'll have to give up on one of the existing entries - I chose Push Mail, as I never use it.

hm, had no Idea about that - will give it a try then, thanks for the info!
do you use any special AC (is there a general one for wm 6.1/6.5 or are they hardware specific?)

Nope, just use the last version (3.3 if I'm not mistaken).

got this over at the tweak thread i think, haven't tried it myself though, still using the windows built in but maybe someone else is interested

I'm trying to use CMBandSwitching.exe from the command line in order to be able to script 2G/3G switch over.
I have GProfile running and when i invoke a "Power Saving Profile" i would like to call the CMBandSwitching.exe from the command line and tell it to switch to 2G.
Is anyone aware of such parameters?
Thanks !