Related
Hello! I recently upgraded my Himalaya to WM5 AKU 3.5. Everything runs nice but I have a problem with the Sound. I use the Himalaya in my car in the T-Mobile CarKit. However since I upgraded the sound is not routed through the CarKit speaker anymore but remains on the internal speaker. I had this issue with some WM2003 Roms and so I know it's pure software. Can anybody please point me to a solution? Is there a way to change this in the ROM or do I need to search for a ROM that has this feature enabled?
Thanks
XDA II said:
Hello! I recently upgraded my Himalaya to WM5 AKU 3.5. Everything runs nice but I have a problem with the Sound. I use the Himalaya in my car in the T-Mobile CarKit. However since I upgraded the sound is not routed through the CarKit speaker anymore but remains on the internal speaker. I had this issue with some WM2003 Roms and so I know it's pure software. Can anybody please point me to a solution? Is there a way to change this in the ROM or do I need to search for a ROM that has this feature enabled?
Thanks
Click to expand...
Click to collapse
Hi.
Same with me as well. I am missing that very much. In between there is one workaround: if the 2.5mm stereo jack is accessible in your car kit, just plug a connector without a headphone/mike into it. This enables output on the 22pin pin connector as well. As I am using a homemade adaptor, this works for the moment - but I do not like the idea to use that 2.5mm jack all the time without really needing it...
So any suggestion, maybe some program to switch? - I do not care if I have to run that program manually when I want to have external output, although some automatic switching would be appreciated...
Regards, Uwe
Hi!
Thanks for your input. Unfortunately the 2,5mm jack is not accessible in the carkit. I start thinking about going back to WM2003SE. What a pity to loose DirectPush for that but the sound is more important....
Hello again.
IF someone from the "developer" group reads this thread at all:
Why are questions about this car kit audio issue always ignored by the rom cooking guys - at least I did not manage to find any answer by llbasha, c_shekar etc (my apology if I missed one). Even if it would not be possible to fix this, at least a definitive answer might be surprisingly interesting.
Please forgive me if this is a little rude, but I consider this a BUG in ALL wm5 roms - instead of just stuffing the rom with more and more gadgets of personal preference someone might look into this???????? HEEEELLLLLPPPPP!!! Anyway - do not misunderstand me - you did a great job, but still - some guys would like to have this problem solved...
I still think that even if there is no fix in wavedev.dll possible (I think that dll is the cause of the problem) it should be possible to write some small application to "tell" wavedev.dll to use the external speaker/mike for all audio I/O. If I would have the necessary input I would be willing to try to write an app. So maybe someone can tell me where to find information about functions within wavedev.dll?
Regards, Uwe
Solved !!!
astroguy said:
Hello again.
IF someone from the "developer" group reads this thread at all:
Why are questions about this car kit audio issue always ignored by the rom cooking guys - at least I did not manage to find any answer by llbasha, c_shekar etc (my apology if I missed one). Even if it would not be possible to fix this, at least a definitive answer might be surprisingly interesting.
Please forgive me if this is a little rude, but I consider this a BUG in ALL wm5 roms - instead of just stuffing the rom with more and more gadgets of personal preference someone might look into this???????? HEEEELLLLLPPPPP!!! Anyway - do not misunderstand me - you did a great job, but still - some guys would like to have this problem solved...
I still think that even if there is no fix in wavedev.dll possible (I think that dll is the cause of the problem) it should be possible to write some small application to "tell" wavedev.dll to use the external speaker/mike for all audio I/O. If I would have the necessary input I would be willing to try to write an app. So maybe someone can tell me where to find information about functions within wavedev.dll?
Regards, Uwe
Click to expand...
Click to collapse
Simply Download the attachement. It is a working wavedev2.dll which must be place in /Windows
After that, search Registry for "wavedev.dll" and replace it with "wavedev2.dll". Wait a minute, until you do a (software-made) soft-reset.
After that, you are DONE
Hope, you are not angry anymore...
Thanks
Hi.
Sorry for being this late, but due to some lack of time I did not check regularly. So I am the more surprised to find an answer .
I will check it this afternoon and report back.
Regards,
Uwe
hiiiii
i wonder can i use a widcomm stack with midget WM6 rom ?
if yes , which one i must use ?
i hd one in helmi 1.1 and i was very satisfied ,
and thaaaaaaaaaaaaaaaaaaaaaaaanksssss
goood day
------------------UPDATE - -- --- --
i tried
((look in the thread from 10th reply))
Midget_1990 said:
http://www.htc-devs.com/uploads/Universal/Cabs/broadcomm_bt_stack.CAB
Click to expand...
Click to collapse
no answer ??? strange !!!!
if i cant use any widcomm stack please tell me and don't make me confused hh
any hope ????????
thanks
no reply aaaaaaaaaaahhhh
pleeeeeeeeeeeeeeeeeeeeeeeeeease anyone
dastan said:
no reply aaaaaaaaaaahhhh
pleeeeeeeeeeeeeeeeeeeeeeeeeease anyone
Click to expand...
Click to collapse
is this so hard to try on your uni? make full backup, install and try...
slimag said:
is this so hard to try on your uni? make full backup, install and try...
Click to expand...
Click to collapse
ok it seems that i must try one , but i hoped that some one already tested it
thanks anyway
goood day
i want to try a widcomm stak
but i didnt find any of them that worked with universal
i tried search ,but nothing in uni forum !!!
can someone point me to a download link or thread ???
HEEEELP !!!
Here it is:
http://rapidshare.com/files/30721150/broadcomm_bt_stack.CAB
How are the tests going? It is woking?
maxstegi said:
Here it is:
http://rapidshare.com/files/30721150/broadcomm_bt_stack.CAB
Click to expand...
Click to collapse
i cant download from rapid share ? any other links ????
at mean time im trying to download ,but no hope with rapid cause i use shared ip address !!!
http://www.htc-devs.com/uploads/Universal/Cabs/broadcomm_bt_stack.CAB
thanks
Midget_1990 said:
http://www.htc-devs.com/uploads/Universal/Cabs/broadcomm_bt_stack.CAB
Click to expand...
Click to collapse
thaaaaanks
that works greeeaaaat , until now i tried file transfer and works %100
with Nokia S40 and S60 (6300 , N72 ) ,and i dont have a blutooth headset to try other functions ,
did any one want me to try something else with widcomm's stack ??????
thanks again Midget for your help and your beautiful ROM
thanks all ,
ok im testing it for aprox 2 hours
i have strange bugs , activesync connects after at least 10 sec from connecting USB
and my notification tab in setting\Sound and notification will open aprox after 6 seconds ,
i dont know if its just me or everyone got these few bugs
but the speed is excellent , may be 3 time or more faster than of M$
Yes, I can also confirm than Broadcom stack works great on new WM6 releases.
It is very fast, absorbs not much program memory, but quite a lot of storage memory
(>5MB, so I have now only 8MB on my storage space )
Works great with File Transfer, A2DP, OBEX Push, VCard Push and BT Serial
Ports (BT GPS). I will test HSP/HFP next week.
2 bugs:
- Can't turn off/on Bluetooth from Comm manager
- BT Icon in Setings->Conections is not VGA and has darker
background than Settings windows background...
Is this still in developement or abandoned?
Mr Groch said:
Yes, I can also confirm than Broadcom stack works great on new WM6 releases.
It is very fast, absorbs not much program memory, but quite a lot of storage memory
(>5MB, so I have now only 8MB on my storage space )
Works great with File Transfer, A2DP, OBEX Push, VCard Push and BT Serial
Ports (BT GPS). I will test HSP/HFP next week.
2 bugs:
- Can't turn off/on Bluetooth from Comm manager
- BT Icon in Setings->Conections is not VGA and has darker
background than Settings windows background...
Is this still in developement or abandoned?
Click to expand...
Click to collapse
For now it was abandoned, I Cant continue the development... I've sold my universal, hope others might continue my work on this stack..
helmi_c said:
For now it was abandoned, I Cant continue the development... I've sold my universal, hope others might continue my work on this stack..
Click to expand...
Click to collapse
really ??? why you sold it , very sad news , we will be missing you Helmi_c ....
I just installed Midget_1990 release of wm6 and cannot get A2DP to work, it skips and jumps horrendously no matter how i add or delete the custom reg hacks that have been posted.
Can anybody confirm an alternative method of fixing this, or whether this will fix it, and whether this is stable on this release or not.
Midget_1990, I noticed you have posted in this forum, could you comment, or advise on your release A2DP and or this widcomm version on your ROM?
simon_darley said:
I just installed Midget_1990 release of wm6 and cannot get A2DP to work, it skips and jumps horrendously no matter how i add or delete the custom reg hacks that have been posted.
Can anybody confirm an alternative method of fixing this, or whether this will fix it, and whether this is stable on this release or not.
Midget_1990, I noticed you have posted in this forum, could you comment, or advise on your release A2DP and or this widcomm version on your ROM?
Click to expand...
Click to collapse
Try Widcomm stack, I have tested A2DP - works fine with new WM6 ROMs, and
sound quality is good
simon_darley said:
I just installed Midget_1990 release of wm6 and cannot get A2DP to work, it skips and jumps horrendously no matter how i add or delete the custom reg hacks that have been posted.
Can anybody confirm an alternative method of fixing this, or whether this will fix it, and whether this is stable on this release or not.
Midget_1990, I noticed you have posted in this forum, could you comment, or advise on your release A2DP and or this widcomm version on your ROM?
Click to expand...
Click to collapse
no idea, i dont have any a2dp hardware to test.
installed widcomm/bluetooth stack found on ftp site. still beta i thin as an ex project by a rom cooker which appears to work great.
apparently, may be caused by cooked roms using the wm5 drivers. not sure if true or not.
btw widcomm is heaps better functional user friendly than the ms crap. wonder why no-one trfrd over to hermes. anyway, avrcp? doesnt work, but sound is trfrd.
Broadcom stack phone call button
Hey,
does anyone have a problem answering calls with the button on the bt headset with this stack?
Ariel
I wasnt able to work with Nicetrack and found that the link to their site is dead.
Is there any other software that works similarly to nicetrack on WM6.
Im on nfrazz62a ROM.with Radio ROM 02.47.11
maybe you can fill us in on exactly what nicetrack does, because this is the first time ive seen or heard of it and maybe for others as well.
Hi mdajunkie,
Its a software which gives us the information about the signal strength in dBm.
well I know you asked for something similar and the only thing that I could think of that has something similar or close to what you might need is batterystatus. That gives you a percentage on how strong your signal is, also does a few other very useful tricks. I wish I could leave you with a link or something to download and try but unfortunately im not at home, otherwise I post it for you. hate to say it but use the search for batterystatus or hopefully someone else has some better input than I could give.
Here is batterystatus
Hi Binder
Thanks for the link.....
And thankyou mdajunkie for the info...
I will try this out and will post back.
Emm,
Nothin upto Nice track.
That was really perfect !
You can download nice track still
I downloaded nice track 8/14 here. I agree that nothing matched nicetrack for maintaining a database of signal strength, cell towers, and even locations when it is hooked up with GPS. However, I have met nothing but failure in trying to get it to work on WM6 - It needs to know the COM port for GSM, and none of the available ones work - either no signal, or it locks the application. Because I really need it in the current cell-strength purgatory I find myself, I might be going back to WM5 if I can't bumble my way through it.
The author released the source code (waaaay beyond my skills) at the same website.
PLEASE let me know if anyone gets it working on WM6. I am currently running Jaguar2 on a wizard.
THANKS.
Please, could anyone send me a copy of the Nicetrack 1.6 sources (binaries would be fine too but I need the source) ?The website is down...
At the moment the site is up to work
Look http://www.nicecuppa.net/
Anyone has any news? I need of a Nicetrack for HTC Touch Pro. Or exist the similar software ?
+ 1
but NiceTrack.exe didnt see Cell ID's on my Qtek S100 wm2003..
iRiKi said:
+ 1
but NiceTrack.exe didnt see Cell ID's on my Qtek S100 wm2003..
Click to expand...
Click to collapse
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
KonikBujany said:
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
Click to expand...
Click to collapse
I tried from my HTC Touch Pro and does not work. The software has a lower resolution and can not read anything.
Any ideea ? Thank you very much
Hi guys. Has anyone found a working version yet?
Cheers
KonikBujany said:
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
Click to expand...
Click to collapse
YES! it is working on my Qtek S100 with wm2003se !!! very nice m8
BUT i can't get it to work with wm6.1 well, the 2008 versions that site actually *WORK* (you can see the cells already being detected) but it has a small resolution. Versions from 2006 have correct resolution, but don't work at all. I'll try contacting the developer, as i don't have any coding skills whatsoever
PS: i tried the batterystatus today plug-in from previous page, but it reveals to be a huge battery hog (at least for me). the constant refreshing of data probably is to blame.
KonikBujany said:
Try binary from
http://piotr.trzcionkowski.pl/programy/poket/nicetrack.html
It has also support for WM5, WM6
Click to expand...
Click to collapse
Do you know how to contact the author? Maybe he is registered to xda...
I have a motorola q9h smartphone and nicetrack doesn't start because of an useless error i've already seen that is related to the smartphone/ppc little differences... If i could look at his source code....
well i tried emailing him, but the form on his site doesnt work.
also, for wm6.1 i now use rk-Location Switch, while nicetrack continues to work flawlessly in wm2003
iRiKi,
1 i now use rk-Location Switch
What program is that ?
http://forum.xda-developers.com/showthread.php?t=328114
There is quite obviously an issue with ALL ROMs except the original 5.2.318 with regard to VoIP and the Wizards integrated speakers. I would have thought VoIP was one of the major attractions of WM6 and I can't believe everyone who is using it is using a BT headset permanently. However it seems to me that there is a distinct lack of enthusiasm for getting this working in the newer Wizard ROMs or have I missed something
I need VoIP (& L2TP/IPSec...) to work reliably, I also want a recent ROM for the speed and because it's newer (don't reply with 'just downgrade to 5.2.318...').
Is anyone working on fixing the VoIP & Speaker issues with the latest ROMs? (please)
Andy
after your PM, i'm really listed your issue with others, i have many foundations in VoIP differences between .318 build and others (2 of them we tested them together).
there are two roms comming soon (1437 build and 1908 build), test them and report please to try more.
its right said:
there are two roms comming soon (1437 build and 1908 build), test them and report please to try more.
Click to expand...
Click to collapse
Do I understand it well that you are working also on the build 1908?
I was a bit dissapointed that you announced using 1437 for future...
Well, I understand that stability is the most important (so far I think that TNT 4 was the best ROM), but I would like to try a higher build from somebody who really tries to fix things...
From what I read I am not very satisfied with 1908 ROMs available (quite a few complains about bugs).
Mirek
mirekluza said:
Do I understand it well that you are working also on the build 1908?
I was a bit dissapointed that you announced using 1437 for future...
Well, I understand that stability is the most important (so far I think that TNT 4 was the best ROM), but I would like to try a higher build from somebody who really tries to fix things...
From what I read I am not very satisfied with 1908 ROMs available (quite a few complains about bugs).
Mirek
Click to expand...
Click to collapse
yes, i'm working on both.
i think i will release them at the same day.
1908 build has many of fixes, but it wasn't very compatible with wizard drivers, i'm at the last touches with the drivers.
I think until a post appears with a title like:
New Microsoft RIL & HTC Wizard Audio driver update to support VoIP
Click to expand...
Click to collapse
Then VoIP is going to be a problem in all ROMs later than the 5.2.318 build. My understanding is there is an issue with the Wizards audio driver and that it doesn't interface with the M$ RIL correctly? correct me if I'm wrong?
Does anyone know how we could modify the driver to work with the latest M$ RIL?
Andy
p.s. can we keep this thread on topic as there are hundreds of others dealing with the latest builds and custom ROMs, I wanted this to open up a discussion regarding why VoIP doesn't work with the Wizards integrated speaker and how we can resolve this.
ADB100 said:
I think until a post appears with a title like:
Then VoIP is going to be a problem in all ROMs later than the 5.2.318 build. My understanding is there is an issue with the Wizards audio driver and that it doesn't interface with the M$ RIL correctly? correct me if I'm wrong?
Does anyone know how we could modify the driver to work with the latest M$ RIL?
Andy
p.s. can we keep this thread on topic as there are hundred of others dealing with the latest builds and custom ROMs, I wanted this to open up a discussion regarding why VoIP doesn't work with the Wizards integrated speaker and how we can resolve this.
Click to expand...
Click to collapse
on the next releasing, i used exactly the same drivers of 318 build (some roms used as files, but this time used as modules), so if something fails because of drivers, it should be fixed.
http://forum.xda-developers.com/showthread.php?t=299950
jwzg said:
http://forum.xda-developers.com/showthread.php?t=299950
Click to expand...
Click to collapse
No, I know how to get VoIP working, the issue is with the latest ROM builds the VoIP audio is not routed to the Wizards integrated speakers (either the Phone speaker or the Stereo speakers).
My understanding is the M$ RIL (Radio Interface Layer) has changed considerably in the latest builds and the HTC Audio Driver has not been updated so does not interface correctly with this RIL. Therefore the drivers from the 5.2.318 build are not going to solve the issue. Correct me if I am wrong here, but this is how I understood the issue?
Andy
That thread covers a plethora of issues. Having read through most of it, I believe this was a problem that may have been addressed earlier, but not solved. I would put out some feelers with Sleuth255 and eluth and see what you come up with and tie your feedback into this thread. I'd be willing to help, it's just that I've lost interest with WM6 since I've been running AKU3.3 on my device and had no hiccups, and I'm also using my device very heavily in my new job.
Still getting nowhere............
I have asked several people on here and there seems to be no resolution to this fundamental issue
I still see everyone including VoIP (or providing a link to an 'add-on') in their builds of ROM's based on 5.2.1437 or later, yet it doesn't work
If anyone has any updates to this then please post them.
Andy
ADB100 said:
I have asked several people on here and there seems to be no resolution to this fundamental issue
I still see everyone including VoIP (or providing a link to an 'add-on') in their builds of ROM's based on 5.2.1437 or later, yet it doesn't work
If anyone has any updates to this then please post them.
Andy
Click to expand...
Click to collapse
the fastest way to fix this is to learn how to cook, then i will give many of possible fixes, and i'm sure you will solve it.
its very simple to learn how to cook, but of course if you have a time.
its right said:
the fastest way to fix this is to learn how to cook, then i will give many of possible fixes, and i'm sure you will solve it.
its very simple to learn how to cook, but of course if you have a time.
Click to expand...
Click to collapse
I can and have cooked many ROMs. The ROM you posted previously as a test would not work as I said in the thread. I did not want to waste time extracting this as the VoIP components you posted to test with I have already tested and they don't work. If you have some alternatives then please let me know.
I currently have a kitchen that I have modified based around WhiteRat's 5.2.1437 Base. I have VoIP integrated into this, however with all ROM's created from this the fundamental issue remains - no sound from the onboard speakers when using VoIP I assume there are no differences between your 5.2.1437 Base and WhiteRat's since you both have rebased drivers based on the original 5.2.318 ROM.
Andy
ADB100 said:
I can and have cooked many ROMs. The ROM you posted previously as a test would not work as I said in the thread. I did not want to waste time extracting this as the VoIP components you posted to test with I have already tested and they don't work. If you have some alternatives then please let me know.
Andy
Click to expand...
Click to collapse
ok, we will play with SYS folder, you have to get 318 full kitchen (which work with you), then we will start with replacing some packages on the SYS folder, the most important Phone folders, then shell folder, then OS folder, and after every change test it if it worked or not.
ADB100 said:
I currently have a kitchen that I have modified based around WhiteRat's 5.2.1437 Base. I have VoIP integrated into this, however with all ROM's created from this the fundamental issue remains - no sound from the onboard speakers when using VoIP I assume there are no differences between your 5.2.1437 Base and WhiteRat's since you both have rebased drivers based on the original 5.2.318 ROM.
Andy
Click to expand...
Click to collapse
as you said you can extract, then extract that and open OEM Drivers for the both, what do you notice??, and also there are many issues has been solved. I know he worked hard, but itsn't mean they are the same .
waiting for your tests and hope you will fix it.
I have Rom TNT5, and i can make calls with my voip provider (voipcheap) when I'm connect with wifi.
I can connect internet by activsync (no wifi, no gprs).
Can i use VOIP by activesync? or i must connect by wifi??
ftomas said:
I have Rom TNT5, and i can make calls with my voip provider (voipcheap) when I'm connect with wifi.
I can connect internet by activsync (no wifi, no gprs).
Click to expand...
Click to collapse
Hi, I have tried TNT5 and VoIP appears to work, however when I make a VoIP call there is no audio via the integrated speaker. If I use a BT Headset I can hear the audio but never from the speaker, this works with the older 5.2.318 based ROM's. Can you give me more details of what settings you use and whether you have a G4 or G3 Wizard?
I am going to extract its rights 'Professional' 5.2.1437 ROM and see where it leads me.......
Can i use VOIP by activesync? or i must connect by wifi??
Click to expand...
Click to collapse
I don't think so, when I leave my WiFi connected and then connect the USB for ActiveSync the Internet Calling goes to 'No Service'. I think this is by design, however I could be wrong?
Andy
Hi, I have tried TNT5 and VoIP appears to work, however when I make a VoIP call there is no audio via the integrated speaker. If I use a BT Headset I can hear the audio but never from the speaker, this works with the older 5.2.318 based ROM's. Can you give me more details of what settings you use and whether you have a G4 or G3 Wizard?
Click to expand...
Click to collapse
Hi,
I have a wizard G3, TNT 5 Professional + HTC Home
Install this 2 files:
voip cab from post#4
Setup_voip 0.3.cab from post 1
Run the setup voip with this settings:
Provider: Voipcheap
My user end password
Registrar address: sip.voipcheap.com port: 5060 UDP
Sip proxy: sip.voipcheap.com port: 5060 UDP
URI address: the program wrote it
Thats all
ftomas said:
Hi,
I have a wizard G3, TNT 5 Professional + HTC Home
Install this 2 files:
voip cab from post#4
Setup_voip 0.3.cab from post 1
Run the setup voip with this settings:
Provider: Voipcheap
My user end password
Registrar address: sip.voipcheap.com port: 5060 UDP
Sip proxy: sip.voipcheap.com port: 5060 UDP
URI address: the program wrote it
Thats all
Click to expand...
Click to collapse
is this will fix the issue which you can't hear the sound through the speaker!!!
i thought so....
because when i made my first try i hear the other person...
but was only that time... now i can't hear anymore
maybe i was dreaming
i gave the possible solves, i hope someone works on.
ftomas said:
i thought so....
because when i made my first try i hear the other person...
but was only that time... now i can't hear anymore
maybe i was dreaming
Click to expand...
Click to collapse
Hmm, I was getting all excited for a minute there.......
Guys,
What do you think if we have a new Bluetooth stack to our Uni?
It's Broadcom 1.8.7 Build 0600. So far I know it is the latest build from Broadcom.
This thread has been created using Internet Connection Sharing over Broadcom BT stack (1.8.7 Build 0600).
Cheers.
ranju said:
Guys,
What do you think if we have a new Bluetooth stack to our Uni?
It's Broadcom 1.8.7 Build 0600. So far I know it is the latest build from Broadcom.
This thread has been created using Internet Connection Sharing over Broadcom BT stack (1.8.7 Build 0600).
Cheers.
Click to expand...
Click to collapse
Hi Ranju!
I'm using currently the roadcomm stack provided by Helmi (UNIBT.cab) . It works well for me! I'm not at home this time, so I can't check the version of the build, but I'm sure that Helmi's is older! It would be cool if you could include the new stack in your ROM, or provide us just a cab file to install
Thanks for your great ROM too, Ranju!
BT Problem
How i understand the version on my BT stack - Broadcomm or other ?
Anyone can post a link to the cab for the latest BT ?
ranju said:
Guys,
What do you think if we have a new Bluetooth stack to our Uni?
It's Broadcom 1.8.7 Build 0600. So far I know it is the latest build from Broadcom.
This thread has been created using Internet Connection Sharing over Broadcom BT stack (1.8.7 Build 0600).
Cheers.
Click to expand...
Click to collapse
In my mind the widcomm/broadcomm stacks were the best! I have only one problem with them now. When I'm using the headset profile with Helmi's stack I can't receive or make calls using the BT headset, in fact I can't hear any audio at all. The other issue is that I believe that the headset button cannot be used to initiate microsoft voice command. If these issues can be resolved then I think there will be a mass following on this project!
WizP said:
In my mind the widcomm/broadcomm stacks were the best! I have only one problem with them now. When I'm using the headset profile with Helmi's stack I can't receive or make calls using the BT headset, in fact I can't hear any audio at all. The other issue is that I believe that the headset button cannot be used to initiate microsoft voice command. If these issues can be resolved then I think there will be a mass following on this project!
Click to expand...
Click to collapse
I've started working on the latest Widcomm build. Basic part is working now.
Let's see ...
helmi's stack was ok, expect handsfree profile, if you will port newest version, and all necessary profiles (handsfree, a2dp, and others) will be working it would be great suprise for uni users
Do you make the Handfree profile working?
Few months ago, I've tried the 1.8.7 Build 300 combined with Helmi's old one, all ok but HF.
http://forum.xda-developers.com/showpost.php?p=1731139&postcount=143
I DO think it's useless without HF.
Really expect your wonderful work!
How did you combine BT Stack v1.8.7.300 with the old? I can use any directions or help.
ranju said:
Guys,
What do you think if we have a new Bluetooth stack to our Uni?
It's Broadcom 1.8.7 Build 0600. So far I know it is the latest build from Broadcom.
Cheers.
Click to expand...
Click to collapse
Any chance to have ActiveSync over BT working properly with this stack and your latest ROM?
Thank you for all your efforts!
Marco.
go ranju, go! seems like u r our only hope. other uni developers not so productive anymore now.
Last time I tried to install the Widcomm BT stack, it froze the phone after every bit of fiddling (i.e. after listening 1 minute of A2DP music, or after browsing the phone with FTP for 1 minute, etc)
Now that basic and some advanced profiles are also available for the MSBT stack, I don't miss the widcomm anymore.
Moreover, it's a pain in the ass to program! (i'm making a bluetooth-multiplayer game)
ranju said:
Guys,
What do you think if we have a new Bluetooth stack to our Uni?
It's Broadcom 1.8.7 Build 0600. So far I know it is the latest build from Broadcom.
This thread has been created using Internet Connection Sharing over Broadcom BT stack (1.8.7 Build 0600).
Cheers.
Click to expand...
Click to collapse
Where is it?
Whats the advantage that the broadcomm stack has over the MS stack? My BT is currently working perfectly (useing Ranju 7.4), A2DP works like a charm, calling thru the headset works fine. So why would we want to use another stack? (no rant, I'm really interested and want to know ;-)
Kassad said:
Whats the advantage that the broadcomm stack has over the MS stack? My BT is currently working perfectly (useing Ranju 7.4), A2DP works like a charm, calling thru the headset works fine. So why would we want to use another stack? (no rant, I'm really interested and want to know ;-)
Click to expand...
Click to collapse
It handles better with COM ports, and you can use even another phone as a BT modem for example. And the UI is much better
Hmmm... I would appriciate it. I'm struggeling with Helmi's Broadcomm BT stack, it complains about there not being enough memory. Though I do have more than 20Mb free.
And also, MS doesn't quiet work with stereo hands free either, it just stops after 5 secs. And I have tried a bunch of registry-tweaks.
So -I- for one, would appriciate work on a bluetooth stack that actually works, very much.
Thanks Ranju, for offering your work on this!
Thank you very much!
yodap said:
It handles better with COM ports, and you can use even another phone as a BT modem for example. And the UI is much better
Click to expand...
Click to collapse
You can do that too with Microsoft BT stack, and I think it's actually easier...
thenext1 said:
You can do that too with Microsoft BT stack, and I think it's actually easier...
Click to expand...
Click to collapse
OK, maybe 4 you but for me the MS stack was ****ting with my GPS, i needed an hour to connect to my regular GPS! With Widcom it was just a click... And, for example with Ranju-s ROM you can't use another BT phone as a modem! Only with widcomm! (i know there are ROMs with MS BT wich CAN use other phone's internet conn. via BT...)
Is anybody testing this stack? Could we get a DL link to it? Thanx!
yodap said:
And, for example with Ranju-s ROM you can't use another BT phone as a modem! Only with widcomm! (i know there are ROMs with MS BT wich CAN use other phone's internet conn. via BT...)
Click to expand...
Click to collapse
You are speaking with a staunch opposer of Ranju
Kassad said:
Whats the advantage that the broadcomm stack has over the MS stack? My BT is currently working perfectly (useing Ranju 7.4), A2DP works like a charm, calling thru the headset works fine. So why would we want to use another stack? (no rant, I'm really interested and want to know ;-)
Click to expand...
Click to collapse
what headphones do you use..... i've tried 4 diff models, all with various probs