Database Info

Help me please, i have a problem with tomtom 6 after upgrade

Hello, ive just upgraded to wm05 and my tomtom 6 worked perfectly before. now when i turn it on the back light goes off instantly. i have tried hex editing it from Backlight to Bbcklight but it comes up with an error when i try to open tomtom then. i have also tried downloading a pre patched one from this forum but still the same error.
Any help would be appreciated.
I have a xdaii
Thanks Andrew

Any help here at all please ive tried my hardest to get this working.
this is the error message i get when i open it with the patched file.
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.

fixed it no worries now

andrew88 said:
fixed it no worries now
Click to expand...
Click to collapse
How did you get it working?

I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew

Re: tomtom6 on xdaII
I have the same problem as you have. You said you hex edited tomtom navigator.exe. Which editor you are using and which location you are changing?
Help will be appriciated.

I have the same problem
I have tried the "TomTom Navigator.exe" fixe in the forum. I've even tried to hexedit the file raplacing Backlight with Bbckligt, but still when I start Tomtom 6 the backlight goes off and remains off even if I quit the application (need to softreset).
I have Hymalaya (Qtek2020) with ROM version 2.01a.32WWE and radio version 1.08.00
Please can someone help me?
Looking forward for replies.
THANKS

andreabix said:
I have the same problem
I have tried the "TomTom Navigator.exe" fixe in the forum. I've even tried to hexedit the file raplacing Backlight with Bbckligt, but still when I start Tomtom 6 the backlight goes off and remains off even if I quit the application (need to softreset).
I have Hymalaya (Qtek2020) with ROM version 2.01a.32WWE and radio version 1.08.00
Please can someone help me?
Looking forward for replies.
THANKS
Click to expand...
Click to collapse
Try this. I got it from one of the forums

Thanks a lot!!!
This fix worked fine for me.
pparmar said:
Try this. I got it from one of the forums
Click to expand...
Click to collapse

andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
I have tried this and still no luck, the fix error message is still coming up, anyone any ideas?

im having the exact same problem
i have downloaded the file TomTom-Backlight-Fix.ZIP
i have copyed the file over to /program files/ navigator/
i am getting the error message
i have also downloaded and installed the fix-error-message.zip
i have extracted the .cab file to the root of the memory card and i have ran it.
it installed sucessfully.
but i am still getting the error message saying that the file is not signed or the components cannot be found.
could you please help me as i need tomtom 6 working as soon as possible

Same Problem
Guys, where does the file go? How do i use it?
Thanks.

Help with tomtom 6
I have a palm treo 650. I just downloaded tomtom 6 and U.S. maps online. I installed tomtom 6 on my phone. (im pretty sure I did it right). I have the navigator symbol and everytime I click it, it says, "tomtom sd card not found".
Well I put a bunch of crap on my sd card and tried it again. I clicked to open the navigator but this time, instead of it saying "tomtom sd card not found", the phone completely shut off on me, then restarted.
I dont know what i am doing.
can someone help me? thanks!

I don't know anything about palm treo 650, but I cleaned the SD card and transfered all tomtom6 files on my desktop computer using card reader. As soon as you insert SD card in to your palm itwill start installing. Try it it might work.

@Fudger: find out where Tomtom Navigator.exe is on your device and replace it by the one posted above.
@oakman: thanks for kicking this thread back up.
I already created another solution for myself, a mortscript that writes to backlight registry keys once Tomtom starts. It is less elegant, backlight flashes and Tomtom starts slower. So
@andrew88 Thanks a lot
Now @All:
I found several solutions on the web for Tomtom turning volume to 70% at start up, but I don't like any of them very much. Anyone who's been able to tweak Tomtom to set it to 100% default?

thanks
very
much
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse

still struggling with backlight
Hi. I have TT6 v 6.01. I have an IPAQ 214, and whilst I used TT6 OK on my LOOX 720, I get the "no backlight" problem on the IPAQ. I have seen the suggestions here. Edit Backlight to Bbcklight first. On my TomTom Navigator.exe there is only one occurrence (UTF). I've edited that and saved. The version posted here seems to have only one occurrence too, but the addresses are different. Different release? Tried my edited version and got the error everyone else reports re certificate. So then I looked at the CAB file suggested to fix the error message. How should this be installed? I put it onto my SD card and found it using explorer on PDA. Double clicked and installed it to "device". No good. Then installed it to "File Store". No good. Then put it into Navigator folder and installed it. No good either. Anyone got any other ideas please?

I've got this same issue on an Ipaq 214 with Tomtom 6.
I can see the issue being described with editing the exe with a hex editor to reference the backlight function correctly, and like others I'm getting an issue with the cerfificate of the file.
TomTom6 does not have a cab called Cert_SPSC
How can I fix the certificate error with tomtom 6 ?
I've edited the TomTom Naviator.exe file correctly, and just need to fix the certificate error.

unicode editor
andrew88 said:
I hex edited the TomTom Navigator.exe and changed all the Backlight to Bbcklight. must be uni-code editor.
Or i have uploaded a pree patched one called TomTom-Backlight-Fix.ZIP
Install that ^
Then if you get this error message
The file 'TomTom Navigator cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. you might need to reinstall or restore this file.
Install the attatched file, Fix-Error-Message.ZIP
This should sort any problems
Andrew
Click to expand...
Click to collapse
how can i get uni-code editor. is it available to download

uni code editor
How can I get uni code editor? I download hex editor but can not see the right code
Thanks,

Tomtom makes my bluetooth stop working, I have the answer

hi
i just got the tomtom and bluetooth issue and i found a way for it to work!!!
this takes from everyones solution and kinda of mixes it into one.
(Please note i am a newbie to this so if this works for you like it did for me great!!!! if not then please let me know and i will try)
yes you will need the tom tom cab file
All actions are to be done on the phone only!!
1) install the tomtom cab file and select the STORAGE DEVICE only. DO NOT INSTALL ON DEVICE!!!
it should restart to complete the installation.
2) when the phone restarts it should come up with an error message the bt file is not a pocketpc file and gives you the normal error.
3) While the phone is switched on remove your memory card.
4) go to settings, application, remove programs and select the tom tom program and remove it.
IT IS VERY IMPORTANT TO HAVE REMOVED YOUR MEMORY CARD BEFORE YOU REMOVE THE SOFTWARE.
5)The phone should then be restarted.
6) You should have now a normal phone that works and bluetooth should be fine.
7) now insert your memory card.
8) go to start, file explorer, storage card, program files, then navigator, here you need to copy the tomtom navigator exe file.
this should be the file with the tom tom logo(the one with the red hands).
copy this file, you do this by pressing on the file and hold it down.
so copy file.
9) now go back to the device memory, you just press the down arrow in the top left hand corner and select my device.
10) now select windows, start menu, programs, and copy the shortcut to this folder.
11) select the tom tom file and rename from "short cut to tomtom" to just tomtom.
12) restart the phone!!! THIS IS IMPORTANT
Now you can access the tom tom from the start menu on your phone and create a shortcut on your phone to it!!!!!
yes yes it was abit of an epic walk thru but this worked 100% for me!!!
you are welcome and thanks to this forum for the apps!!!!

please can you say if this worked or not please

To get Bluetooth working again, you just delete these 2 files then restart your phone.
BtSdkCE30.dll and BtCoreIf.dll

Or use one of the HD2 specific TT cabs that allready have the BT files removed. Works like a charm.

TT for HD2 cab please...
tomasz
Can you provide the link for TT u mentioned please?

How can I remove these two files (BtSdkCE30.dll and BtCoreIf.dll), because on my device these two files are closed by the system ??

Just rename them both, to something like BtSdkCE30old.dll and BtCoreIFold.dll...
It should do the trick
Peter_S said:
How can I remove these two files (BtSdkCE30.dll and BtCoreIf.dll), because on my device these two files are closed by the system ??
Click to expand...
Click to collapse

No, I can´t rename the file because they are locked by the system

Are using Total Commander or Resco Explorer? The normal File Explorer will not allow it.
Peter_S said:
No, I can´t rename the file because they are locked by the system
Click to expand...
Click to collapse

Renaming did the job, tnx.

[Q] Gen Y DualBoot for Rhodium

I have a T-mobile Touch Pro 2. I have the Project Android icon in my start screen and it loads perfectly fine. My issues are trying to get the Auto Boot to run. When the phone loads from pwer up, I get the Gen Y DualBoot screen, but it keeps telling me that Android is missing. Im sure that its a simple case of changing a txt log or moving a file around, but I'm just not seeing in here in the forums.... Anyone got any suggestions.

Did you installed android in the root directory[ of your sdcard]?
yozgatg said:
Keep in mind that your android setup must be installed already at the root of your storage card in order for this app to work correctly (e.g. \Internal Storage\haret.exe or \Storage Card\haret.exe respectively)
Click to expand...
Click to collapse

yes, it installed as part of the andboot file......do i need to remove the Haret.exe from the andboot and have it on root by itself?

I've got the same issue. Any suggestions? I've already made sure all of the switches were right and also edited the registry...

Ok...here's the solution:
I had to go back and re-read the original post here http://forum.xda-developers.com/showthread.php?t=623792 ...the solution is there. The string that needs edited (v1.0.6.0 and newer: "AndroidBootFolder"="string" ("": boot from root of storage (e.g. \Storage Card\haret.exe)| "andboot": boot from \Storage Card\Andboot\haret.exe, string can be edited in registry) doesn't need the full path typed. It just needed the word "andboot" (no quotes) inserted, and then voila!
Good luck.

Where is the .zip file I downloaded?

Hello, I have downloaded a zip file through IE. Where I can find it ?
Thank you

There isnt a specific place... each app has its own isolated storage where it keeps their files.
You should be able to open that ZIP file from the browser and it will show you the files within... if they are recognised file types by WP7, it will let you run them.
But that's it, you have no file manager you can goto and fetch that saved file.
PS: well, you have... but I'm unsure if TouchXplorer is still working or not.

Thanks for this, but how can i delete it if I can't find it? I use the TouchXplorer...
I am concerning about the phone memory.

Generally, files downloaded through IE are stored in temporary memory and will be erased after a certain amount of time.

I ran into the same problem today. luckily i hit the windows button so all I have to do is hit the back button to reach the zip file again. Kind of frustrating when you dont have a file explorer and no other way to reach the file you just downloaded

iGo and ICS (Stunner)

Hi All,
I used to love iGo on my HD2..... so I thought I would try the new Android version. The problem I have is that as the ICS build moves where the external SD card sits I need to find the ini file that tells iGo where the maps etc are located. Problem is I cant find it ANYWHERE on my Note even though it is clearly installed!
Does anyone have any idea where iGo installs its ini file on Android?
Thanks

On Stunner there is a change of location for the external SD card.
External SD card is located at following location:
MMT/EMMC

Yep - that bit I know - what i need to find out is where the iGo ini file is so that I can tell it the new location.... on the old Windows Mobile version the ini file was in the iGo installation folder - but I cant even find that on my Note!

adamelphick said:
Hi All,
I used to love iGo on my HD2..... so I thought I would try the new Android version. The problem I have is that as the ICS build moves where the external SD card sits I need to find the ini file that tells iGo where the maps etc are located. Problem is I cant find it ANYWHERE on my Note even though it is clearly installed!
Does anyone have any idea where iGo installs its ini file on Android?
Thanks
Click to expand...
Click to collapse
Why don't you just copy the relevant directory/ies from the external sd to the exact same path on the internal one ?

I had to place the iGo files in folder sdcard/external_sd/iGO/
That folder contained the three folders (maps etc.)
That worked for me. Biggest problem with iGO is that it doesn't support the GNote's high resolution, so it only uses 1/3 of the screen.
If you have a solution for that, pray tell...

N-aero said:
I had to place the iGo files in folder sdcard/external_sd/iGO/
That folder contained the three folders (maps etc.)
That worked for me. Biggest problem with iGO is that it doesn't support the GNote's high resolution, so it only uses 1/3 of the screen.
If you have a solution for that, pray tell...
Click to expand...
Click to collapse
switch to sygic

stephenjason89 said:
switch to sygic
Click to expand...
Click to collapse
Having real troubles with Sygic on my Note with ICS.. works brilliantly on my Xoom with ICS so don't know whats wrong!