Related
hello,
i read so many posts on this site, that it's starting to confuse newbies.
I have a German MDA Compact, and would like to flash it with a WWE rom.
Now, i've seen some ppl suggest to use "devicedata.exe" and change the bat file etc...procedure. While others say to unzip the "upgrade.exe" and run "MaUpgradeUt_noID.exe".
Which procedure do i need to follow in order to upgrade my Mdac?
Also, which ROM image do you suggest?
thanks for your support!
I agree, totally clueless and have read so many posts and now totally confused.
Can any patient person give us a straight and simple explanation of ROM upgrading? Which ones to use, what to watch out for etc. I'm sure there's lots of people who have the same questions but don't ask.
Many thanks in advance for anyone can help.
Finally someone asks!
I upgraded my German MDA Compact to: 1.06.01 GER, Radio 1.05.00 EXT-ROM version 1.06.130 and everything works fine right now (it was an upgrade from T-mobile).
I would like to upgrade to the 1.11 WWE Rom version and also the bigstorage version without extended ROM, but I'm afraid dong that.
Anybody experience with that?
Andre
Hello to all,
can you share me that: MDA Compact to: 1.06.01 GER, Radio 1.05.00 EXT-ROM version 1.06.130
Thank you
John,
Normally if you get the official release from dangaard telecom, it's just an EXE file that you have to run and everything works fine.
If you get a country id error, then you need to download the MAupgrade_noid and you have to unzip the EXE file in the same folder as the MAupgrade_NOID.
Then in stead of BAUpgrade, you have to run MAupgrade_NOID
Hi there,
I uploaded my upgrade file to 1.06 German T-mobile (no simlock) to the ftp site. This works fine for my MDA Compact
MA_TMDE_10601_130_10500_Ship
See it here.
ftp://ftp.xda-developers.com/Uploads/Magician/
Andre
If its simply a MDA to MDA ROM update, you should be able to simply run the file and that should work fine, however if its a Imate / qtek / MDA German to MDA Compact its tricky stuff, but can be done.
If you are able to get hold of the required rom, you will need to extract its files and install the upgrade executable file.... easy isnt it
Ok here it goes
1. Download the Rom file
2. Right click and extract to a named folder
3. You should end up with about 6 - 8 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade if you were an imate user, however as a MDA user you need to get hold of the maupgradeut_noid file which could be obtained over the net or from the xda developers site.
4. Once you have this maup....noid file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
5. In activesync, click on file and connection settings and untick the USB connection.
6. Connect the phone to the USB, and run the maupdateut_noid,
7. The upgrade wizard wil start, go through a few checks then eventually come up with the coutry Id error.
8. Run the maupgradeut_noid file again and this time it should allow you to run the wizard.
9. The process should then go through 3 stages which should last about 10 - 15 minutes.
10. When finished you should get the upgrade successful notification and a prompt to reset the device
11. Hope that helps.
12. Rgds
I like others have been confused by all the different methods and possibilities for ROM changes. I particularly am interested in the BIG ROM upgrade that gives you 27Mb more free space. However, the threads on that subject are very long and reading all the posts is confusing.
It would be great if we had a FAQ that could be a Sticky at the top of the forum. I am sure its a lot of work to compile the FAQ but it would be sad to see all the hard work in these forums not get fully utilised.
I would be hugely grateful if there was document that summarised the best methods for ROM upgrades.
on the ftp site, you need to download the procedure document, that explains everything
hth
jim
thanks a lot to all of you guys for helping me out!
this is exactly what this forum is about.
ftp
Hi, All my first post here, How do we get acess to the ftp site for the instruction to the 27 meg bigrom when i try to go to ftp it won't get me inn.
Thanks
Domingo
I finally can successfully upgrade my O2 mini to version ROM 1.12.00 patched with 27MB BigStorage (ROM verion: 1.12.00WWE, ROM date: 05/28/05, Radio:1.12.00, Protocol: 1337.42, ExtROM: n/a <- of course!! ). Although I stuck for quite some time but finally I got it!!! I just want to share some experience with you folks. If you are stuck in either one method, try the others! [I used method 3 to do the patching]
1.12 ROM image from http://www.buymobilephones.net/romfile_download_s100.ihtml
Currently, I recognize that there are 3 ways to patch BigStorage,
1/ Anansky method (http://forum.xda-developers.com/viewtopic.php?t=20043)
- currently it can only manage 1.11wwe version
- my experience: seems that 416 (DEC) is the magic number
2/ MKS mehtod (http://forum.xda-developers.com/viewtopic.php?t=22582)
- apperently can handle all verison of ROMs
- but some guys (me too) can't use this method at all. No matter what ROM I was using (shipped, patched), no matter what I did on the rom (not masked, 416byte..), the problem was that it stuck at BootLoader mode after 100% flashed. I think it may be hardware related (mine is O2 mini, original ROM is traditional chinese 1.06).
- my experience: if you have upgraded your Magician using official AKU, then extract the image and run this patch progam. If you are using upgraded ROM from other sources, then you have to upload you own ROM, copy the first 416byte to the upgraded ROM, and then apply this patch program.
3/ Dr. Chair / Talent (http://forum.xda-developers.com/viewtopic.php?t=23250)
- apparently can handle all version of ROM-
- my experience: key point is to search 2 locations "02 00 00 80 00 20 20 00 00" and replace them by "02 00 00 b8 01 20 20 00 00". Also, after flashing the machine, the first start up time will take a bit longer (mine is 4 minutes), be patient!
Other general sharing:
- try to use external card reader
- pressing Bootloader mode will immediately erase all the information (except data in rom) of your PPC, no matter you have it patched or not. Further, BigStorage patching will erase data in "storage" (rom) as well.
- when using HexEditor (or so), be careful if it's the DEC or HEX position
- On-screen checksum failure, ntrw write failure can be ignored
From others:
Koksie said:
I found that trying to use the ntrw program thorugh an USB hub did not work, all copied ROM files from my SD card would turn up as 0kb. Be sure to plug the card reader directly into the USB port of the PC, then the full ROM wil be copied.
Click to expand...
Click to collapse
Me too. Try to search " 02 00 00 80 00 02 02 00", as some other post said, there are only two searches required. This can be applied to 1.11WWE and 1.11 Chinese rom too.
1.12 is faster than 1.11 so far I have seen, bluetooth functions fine.
Please, could anyone tell where to find the 1.12 or upload it?
I am sorry to my previous post, the numbers to search should be
02 00 00 80 00 20 20 00 00
There's a 1.12 BigStorage WWE ROM into ftp under uploads\magician folder :wink:
girtsn said:
Please, could anyone tell where to find the 1.12 or upload it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=23288
YRLS said:
There's a 1.12 BigStorage WWE ROM into ftp under uploads\magician folder :wink:
Click to expand...
Click to collapse
wow thks,
spared me time, instead of going thru installing rom and running the mksbigstorage procedure.
hv installed it, couldn't see any difference with the earlier 1.11,
BT still the same (sometime would not recoqnize other installed hw).
agai, thks a lot.
YRLS said:
There's a 1.12 BigStorage WWE ROM into ftp under uploads\magician folder :wink:
Click to expand...
Click to collapse
wow thks,
spared me time, instead of going thru installing rom and running the mksbigstorage procedure.
hv installed it, couldn't see any difference with the earlier 1.11,
BT still the same (sometime would not recoqnize other installed hw).
again, thks a lot.
johannesl said:
wow thks,
spared me time, instead of going thru installing rom and running the mksbigstorage procedure.
hv installed it, couldn't see any difference with the earlier 1.11,
BT still the same (sometime would not recoqnize other installed hw).
agai, thks a lot.
Click to expand...
Click to collapse
johannesl,
O2mini - PM10A WWE O2ASI001
bigstorageROM 1.12 Radio 1.11 ExtROM 1.11.922
Click to expand...
Click to collapse
Seems that you don't have Radio 1.12 installed. Maybe worth to have a try...
[/quote]
Seems that you don't have Radio 1.12 installed. Maybe worth to have a try... [/quote]
true, but does radio 1.12 really make difference on the BT issue ??
(at the moment I'm a bit lazy going thru the whole procedure, maybe sometime next week I will try it)
anway thks 4 yr comment
palmVer said:
Seems that you don't have Radio 1.12 installed. Maybe worth to have a try...
Click to expand...
Click to collapse
By the way, If I only flash the radio ROM (ex Qtek), will I loose the installed bigstorage ?????
thks.
hey,
what's the file name for 1.12 bigstorage in the upload/magician folder??
i can't find a big storage one!
maybe the qtek extracted dir???
thanks
kolbac said:
hey,
what's the file name for 1.12 bigstorage in the upload/magician folder??
i can't find a big storage one!
maybe the qtek extracted dir???
thanks
Click to expand...
Click to collapse
Try this:
http://www.buymobilephones.net/romfile_download_s100.ihtml
i think it's a wrong link....
that's the link for the original 1.12 rom.
i wanted the bigstorage one....
thanks
bye
I got problem trying to do BigStorage
hi there,
i have successfully upgrade my ROM to v1.11 and now i'm having trouble upgrade the BigStorage, i'm in the stage where i need to backup the original ROM, i have follow these instruction below:
Backup original ROM:
1. Cancel USB in ActiveSync on your PC <important!>
2. Put Mini into the boot loader mode (hold both on/off and camera buttons at the same time while resetting). <you need to
hold all three buttons for several seconds.>
3. Insert empty SD card to Mini.
4. Connect Mini to PC through USB.
5. Run romupdate.exe on pc.
6. Select “\\.\WCEUSBSH001” in port settings. In the popup windows, enter “d2s” and press enter.
Click to expand...
Click to collapse
Up to step 6, that's where my problem come... I can't select any “\\.\WCEUSBSH001” in port settings, all I can select is COM1 or COM2...
Someone told me to end the process wcescomm.exe in task manager but it doesn't help either...
Now my mini is in the "boot loader mode", anyone can help me to re-flash it back to normal?
Please help. Thank you for your time.
kolbac said:
hey,
what's the file name for 1.12 bigstorage in the upload/magician folder??
i can't find a big storage one!
maybe the qtek extracted dir???
thanks
Click to expand...
Click to collapse
Just uploaded to the FTP :
ftp://xda:[email protected]/Uploads/Magician/mksBigStorage112.rar
this is the file I downloaded from the FTP a few days ago, but seems some1 has deleted it.
It must be noted that this is ROM 1.12 with Radio 1.11.
If you'd like install it don't forget to edit the first 416bytes with the one from yr original ROM
good luck.
Re: I got problem trying to do BigStorage
stalkie said:
Up to step 6, that's where my problem come... I can't select any “\\.\WCEUSBSH001” in port settings, all I can select is COM1 or COM2...
Someone told me to end the process wcescomm.exe in task manager but it doesn't help either...
Now my mini is in the "boot loader mode", anyone can help me to re-flash it back to normal?
Please help. Thank you for your time.
Click to expand...
Click to collapse
You missed step 1.
No need to end the process for WCESCOMM.EXE. Just go to the ActiveSync icon on the system tray, Connection Settings, and uncheck "Allow USB connection..."
method using .nb1 file to upgrade OS ?
May I ask how exactly to use .nb1 file to upgrade the device?
Re: I got problem trying to do BigStorage
BeyondtheTech, after that I did try to do but the problem still there...
this boot loader mode continue to goes on until the power depleted... then I charge my Mini and I try to switch on again and my Mini back to normal (like factory default setting, just like when you hard-reset) my ROM version is 1.11
So currently my Mini is running now without BigStorage patch
Re: I got problem trying to do BigStorage
stalkie said:
BeyondtheTech, after that I did try to do but the problem still there...
this boot loader mode continue to goes on until the power depleted... then I charge my Mini and I try to switch on again and my Mini back to normal (like factory default setting, just like when you hard-reset) my ROM version is 1.11
So currently my Mini is running now without BigStorage patch
Click to expand...
Click to collapse
If your problem is can't selecting any “\\.\WCEUSBSH001” in port settings, then try
1/ using other USB port
2/ rebooting the PC
3/ use another PC to try again.
PC USB recognization is not as good as we think and it depends of OS, USB hub, hardware, drivers installed...
Seems like T-Mobile have brought out their second maintanance release, supposedly including blackberry (jumps up and down, then realises blackberry is overhyped and overpriced).
Downloading it now from
http://t-mobile.iris-global.com/download_manager_mda_com.html
From the filename it appears the radio stack is still at 1.12, but I'll check once it's on.
Apologies if this is old news but I couldn't find any reference to it so far.
Technology hates me
Computer decided to reboot during ROM flash, feck knows why. Luckily it seems the TMO upgrade utility can restart its flashing procedure even though connection was lost.
Don't mind computer problems if they got some kind of sense to them, but randomly just restarting for the first time since I built it during the most ackward time just proves to me that computers are both evil and have a since of twisted irony.
Any improvement
Any improvement in this release?
I have been using the May update (BigStorage applied) since July fairly successfully.
I don't want to go through this if it's not worth it, so would appreciate advice from anyone who has applied it first.
Thanks
Well it's now got Blackberry support, whoopty f***in do. Also the radio version is still 1.12 so that has to be updated seperatly. In the 15min its been alive I havn't noticed any major changes but never really expected to.
Will post if I experience any problems or notice anything lifechangingly amazing about this new ROM. Would be nice if people using this ROM could do the same.
BTW anybody got a list of the ExtROM files and their comparitve uselessness? I went through the 1.12 ROM with a CAB manager but really can't be arsed this time round. Probably just install the whole lot through shear laziness. On second thoughts the BB client takes up 1.3Mb, so like f**k am i letting that onto my baby.
Hi Herman,
Why not go for BigStorage as you're not using the ext-rom. In the upgrade to radio 1.13 you can find how to do it from the shipped rom & on the ftp there's a bs 1.13 rom present, based on the Dutch TMO version so WWE, but use your own ext-rom files for specific UK settings.
Cheers, M
Cheers
Sorry, didn't really put it right. Already had the 1.13 radio downloaded and just installed it after, was no worries there. As for the BigStorage ROM, I've never particularly liked the idea, especially after reading problems people have had reverting back to the old storage configuration. I'm quite happy with my 512Mb SD card, wouldn't really use the extra space in storage anyway.
Cheers for your thoughts though mate
Ps had the new ROM up and running for few hours now, not noticed any glaring issues apart from that damn lack of BT serial ports issue but thats the radio not the OS ROM.
BigStorage
Finally gave in and overcame my fears. Applied the BigStorage hack to the latest TMO ROM as I read on here that it's reversible. Well seemed to have gone smoothly, although the increased hard reset time at the begining nearly made my heart stop.
If anyone wants I can upload the latest TMO official ship (1.13) with BigStorage hack, which doesn't need the SD card flashing method. Can do straight over USB.
Just post a msg if you want me to upload.
herman3101 said:
Seems like T-Mobile have brought out their second maintanance release, supposedly including blackberry (jumps up and down, then realises blackberry is overhyped and overpriced).
Downloading it now from
http://t-mobile.iris-global.com/download_manager_mda_com.html
From the filename it appears the radio stack is still at 1.12, but I'll check once it's on.
Apologies if this is old news but I couldn't find any reference to it so far.
Click to expand...
Click to collapse
that doesn't work with my jam ... i still can't figure out how to update my ROM.
Re: BigStorage
herman3101 said:
Finally gave in and overcame my fears. Applied the BigStorage hack to the latest TMO ROM as I read on here that it's reversible. Well seemed to have gone smoothly, although the increased hard reset time at the begining nearly made my heart stop.
If anyone wants I can upload the latest TMO official ship (1.13) with BigStorage hack, which doesn't need the SD card flashing method. Can do straight over USB.
Just post a msg if you want me to upload.
Click to expand...
Click to collapse
i would love to have that...right now im experimenting some of the roms thats available. i would like to give it a try. please upload it here or on the ftp. thanks mate.
One thing, this EXT ROM is 1.13 128 while NL EXT 113 ROM is 131. Which one we should use??
Re: BigStorage
parklife said:
i would love to have that...right now im experimenting some of the roms thats available. i would like to give it a try. please upload it here or on the ftp. thanks mate.
Click to expand...
Click to collapse
Hi parklife,
Still strugling to get it done? I gues herman3101 will upload a modified nk.nbf. Hope you succeed with it. At least I did with a patched nk.nbf. Can't upload myself for a few days as I'm not in the neighborhood of my PC. It's just me & my magician and I'm not complaining.
Cheers, M
Uploading now
Well I'm uploading the ROM up to the ftp now. I've included the updated nk.nbf as well as all the files needed to do a USB install. The files were small enough for me to think well why not. Once that's been uploaded I'll check the download section and find a link for you all.
Further to the guy who couldn't update his ROM, being kinda vague there buddy but I'll see what I can do. If you would be so kind as to follow these instructions pretty much to the letter then we should be OK:
- Hard Reset your MDA (press power button at same time as reset)
- After the selecting your time zone do a soft reset to avoid the customization process
- Plug your fresh MDA into your USB and wait for ActiveSync to bring up the connection wizard, select Guest partnership
- With your MDA still plugged in but in Guest mode just double click on the file you downloaded of T-Mobile and follow the onscreen instructions.
If you still have problems after following those steps then don't hesitate to reply but please be more specific so we don't have to guess what your issue is.
Will post a message when the BS ROM is up on the ftp
PS Well with the BigStorage ROM it obviously doesn't matter which ExtROM, but I would always go for the one from your provider so if you are with T-Mobile UK then go for their ExtROM because your guarenteed compatibility
Link to the ROM
ftp://xda:[email protected]/Uploads/Magician/WWE_TMO_1.13 Official Release with BS.zip
ftp://xda:[email protected]/Uploads/Magician/
The first is a direct link which probably won't wok because of the way I named the file and the second is a link to the folder which it is in.
I have to be honest I have no idea how to move this ROM into it's appropriate folder under Magician/BigStorage ROMs but o well. You'll find it where I've specified.
BTW the file attached is a list of my interpretations of what the 1.13 ExtROM files do. By no means conclusive or correct, its just what I've noticed them do during a stage by stage install and looking for clues inside the cabs.
herman3101,
Album & camera are bundled in the cab. That's the only flaw I noticed in your nice description.
Probably a moderator will move your file to the download section. Guess that's what happened to my BS rom as well. Thanks for uploading your files. It takes me ages to upload those files with my magician.
Good work & seems you're right on my track with decisions making for BS. Only I messed my first try completely and that's something I'm not wishing to anyone. Just waiting for the first hard-reset to finish is enough I think.
Regards, M
Re: BigStorage
oltp said:
Hi parklife,
Still strugling to get it done? I gues herman3101 will upload a modified nk.nbf. Hope you succeed with it. At least I did with a patched nk.nbf. Can't upload myself for a few days as I'm not in the neighborhood of my PC. It's just me & my magician and I'm not complaining.
Cheers, M
Click to expand...
Click to collapse
oltp, i tried your ROM, everything works fine, but it seems the clock stuck on 24 hour format, usually i can change it into 12 format just like i want it, but the Dutch ROM seems did not offer 12 hour format. But i trully appriciate your time and effort fot uploading the ROM
thanks oltp.
Re: Uploading now
herman3101 said:
- Hard Reset your MDA (press power button at same time as reset)
- After the selecting your time zone do a soft reset to avoid the customization process
- Plug your fresh MDA into your USB and wait for ActiveSync to bring up the connection wizard, select Guest partnership
- With your MDA still plugged in but in Guest mode just double click on the file you downloaded of T-Mobile and follow the onscreen instructions.
Click to expand...
Click to collapse
hey herman, thanks for the upload, i got it to work on my M500. But i would like to add something on the set up. You need to do some extra steps to avoid the the ID ERROR 120. Ok here ya go:
-Extract the rom
-edit the RUU.conf with notepad, add [CHECKCEID_TYPE]=1 on the top
-copy MaUpgradeUt_noID.exe from ftp to the extract folder
-press power, camera and rest on your magician
-plug the magician to the USB
-AND execute the MaUpgradeUt_noID.exe
-follow instuction
I waited for 4 minutes till i got my welcome mode.
for more info go check on the ampda how to's pdf file
thanks for herman3101, oltp, and ampda, now i have the perfect rom that i will keep for some time.
Hey Parklife,
Glad you finally made it. Don't think the Dutch rom is any different from the UK rom, both are 1.13 WWE TMO. Except for the ext-rom ofcourse. Managed to get my time on 'h:mm am' too with the english (us) region.
Good thing is that everyone can choose of three methods, to get this BS rom, whichever way they're feeling most comfortable ith and that has been different before.
Cheers to all of you.
Re: Uploading now
parklife said:
hey herman, thanks for the upload, i got it to work on my M500. But i would like to add something on the set up. You need to do some extra steps to avoid the the ID ERROR 120. Ok here ya go:
Click to expand...
Click to collapse
Cheers for complementing the post, didn't include it because my MDA is from TMO UK so I don't need to do that step.
PS I've been running the ROM for a little while now and it seems as stable as ever
hey, one more question for you guys...after i install the Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB, my magician clock changed into 24 hours clock format. I tried to change it into 12 hours format on regional setting - date like oltp said, but could not change it back to the 12 hours format...have you guys had the same problem? no biggies, i just not use to the format.
Parklife,
I noticed that the clock changes only after I alter the 'time style' on the time tab (sample changes immediately) go to another tab and then touch the clock on my programbar. Changing the region seems not necessary. Yesterday I fiddled a bit with the settings, now I used a more structural approach.
Cheers, M
When I try to upgrade my i-mate JAM to a new special ROM from Kichen after a step this masage apears "Cannot execute the remote comunication program. Plese make sure that the USB/Serial cable is properly connected.
so guys plz help me urgent
Does the same error come up when you flash with a shipped-rom which hasn't been changed?
Does your device respond to any commands from the update program? If so, what happens on your device?
And what did you change in the rom?
As you probably guessed: I don't know an answer to this & i'm trying to figure out what is different in your setup compared to a regular update.
Regards, M
Thanx 2 reply
No dear every thing is OK When I try to update with shiped ROM it works 100% no problem. When I click in my computer the device is located and opens software installs nothing abnormal every thing is as usual, But when I try to update it with special ROM (got from Kichen that I like very much) the folowing masage appears
I guess that romkitchen isn't compatible with magician :-(. You can try to put in the GetDeviceDara.exe from a shipped-rom in the appropriate romkitchen folder, maybe it helps. Cause I love to see this working.
Good luck, M
Let me do it
The rom I got is for windows 2003 SE so I think it should work, now let me act your advise then i'll inform you.
regards
The same problem i have
I try to update one of my friends i-mate JAM in a dfrent PC but the same problem I got. I think the rom is not compatible with JAM. Do you know another ROM to work on my JAM like available in Kitchen???
Well I haven't experimented with RomKitchen & don't know what you want to achieve with it. Ext-roms can be edited with bal666's tool too & there are loads of different (not edited) ext-roms @ the ftp.
& of course there's the BIG Storage hack, with which you trade in the ext-rom for an enlarged internal Storage folder.
Haven't seen anyone yet who really edited the CE image :-(
M
Yes I tried but...
I tried big ROM but in 3rd stage the folowing masage appears "card incilize error" When it tries to back up ROM on SD card. I have MMC not SD Now may be this is cause or somthing other. Have you updated your device with big storage rom & is it OK???
If so I'll try again
I downloaded the ROM form this site http://www.romkitchen.de I updated one of my friends PPC from this site's Rom its performance is 50% increased. but mine (JAM) is not going to update
I did it with a patched shipped-rom :!: Follow this link & I think you should be able to manage http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
RomKitchen is also on this forum, but I think it's for other devices. You can find it in the wiki.
Cheers, M
Ok let me do it
Thanks dear let me download and check it. One thing that my JAM is from i-mate & there is T-mobie ROM, but its for Magician so should I do it no problem? Will I be able to reload its shiped ROM that I have already. sorry for my broken english
Yes it's no problem to use another magician rom, use maupgradeut_noid.exe to bypass country id error. To flash your current shipped-rom back just follow the same procedure.
Be carefull to backup your current ext-rom cabs though, they do contain some operator specific settings for eg gprs, voicemail etc. You need to install some of them instead of the TMO ones present in the TMO 1.13WWE rom. You can use WinCE cabmanager (available on trial) to have a look inside the cabs & decide wich ones to use.
This is my list of the Dutch TMO 1.13WWE ext-rom cabs anyway:
BlueTooth patch:
BTHUSB_PATCH_AKU26.CAB
MMS:
CAB-Acrosoft-MMS-2.5.0.28-ENU-MagicianAKU2.6-13May06.CAB
Needed in combi with MMS (does contain Dutch T-Mobile specific settings though)
CAB-Customization-Magician-TMONL-03Jun05.CAB
Certificates:
CAB-Certificate-TMO-16Sep05.CAB
Email wizard:
CAB-EmailWiz-2.0.0.6-PPC-TMNL-ENU-09Aug05.CAB
Java support (midlet manager):
CAB-TaoJava-10.1.2.76-PPC-ENU-17Aug05.CAB
Caller ID:
Caller_ID_Magician_T-Mobile_WWE_RC22.CAB
Camera & album:
Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB
To hide the ext-rom:
Delete_vdisk_shortcut_WWE.sa.CAB
IntelliDialer (with T-Mobile colors, other skins avalaible on the forum):
IntelliDialer_Magician_T-Mobile_WWE_RC20.CAB
IntelliPad (T9 for Slovak, Polish, Hungarian, German, English, Dutch, Czech):
IntelliPad_Magician_T-Mobile_WWE_RC20.CAB
Remove current PIE favorites:
Remove_Favorites_MA_TMONL_112187.CAB
New battery.dll & wavedr:
THB_MDA_COMPACT.CAB
T-Mobile sim toolkit, theme, sounds, carrierlogo etc.:
TMNL_Customize_113125.sa.CAB
SIM manager:
TMNL_OperatorName_MA112178.sa.CAB
UserAgent settings:
UA_Profile_TMO_Compact1.1.sa.CAB
Start menu customization, Today plugin settings & T-zones:
UXC_Magician_T-Mobile_WWE_NL_RC25.CAB
Set the version to 1.13WWE
Version_WWE.CAB
Zip support:
Zip_Magician_T-Mobile_WWE_RC20.CAB
Success, M
thanx
Ok thanks a lot
regards
Edit:
moved the HOWTO to the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
feel free to update/correct the Wiki if you find failures, bugs or updates
It worked for me - but I cannot guarantee that you don't brick your Touch.
So be warned.
Thanks to dsixda for updating the Wiki for Elfin
MOD EDIT: See this post in case the Wiki is not working:
http://forum.xda-developers.com/showpost.php?p=7662245&postcount=214
Will ruu_signed.nbh be suitable for traditional chinese?
Works perfect for me, now a way to rebuild my os with les software
With this method can someone build a french custumized ROM like the 62MB+ and 4MB PagePool one ?? It will be awesome !! Nice work r0p3!! It's workiiiiiiiiiiiiing !!
Works fine for me, thanks for the good guide
Greetings Denis
Now ... How to modify it ??
P.S : Can I include the extRom when i build the ROM with the OS?
I got my work cut out this week.
I'll try this big Up
(it's a bit more clearer then wiki info, maybe you can update it)
Noonski said:
I got my work cut out this week.
I'll try this big Up
(it's a bit more clearer then wiki info, maybe you can update it)
Click to expand...
Click to collapse
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
r0p3 said:
Wiki updated:
http://wiki.xda-developers.com/index.php?pagename=Elf_HowtoDumpRom
Click to expand...
Click to collapse
Can I dump my touch with all installed programs, cooking a complete rom including installed programs?
No - that's not possible I Think.
But you can use sprite backup.
It worked perfectly for me when I flashed the ROM back.
But keep in mind that it only will work correctly on the same language of the ROMs.
r0p3 said:
No - that's not possible I Think.
But you can use sprite backup.
It worked perfectly for me when I flashed the ROM back.
But keep in mind that it only will work correctly on the same language of the ROMs.
Click to expand...
Click to collapse
I have Sprite Backup, but after flashing the device with the same rom, the restore didn't work, so I had to install the programs again.
eefurt said:
I have Sprite Backup, but after flashing the device with the same rom, the restore didn't work, so I had to install the programs again.
Click to expand...
Click to collapse
Here is a trick I have used for quite some times with Sprite Backup 5.1
Sprite Backup version 5.1, version 6.02 is more fancy, 5.1 is good enough.
1. Do a full backup, make sure option Create Self Extract Exec
2. Hard reset (optional)
3. Flash new ROM
4. Run the backup file, make sure the Upgrade Mode Restore Option is Check.
5. Kneel down and pray (optional, or take a cup of coffee).
SKtools is handy.
Step 4 is most important. When it asks you for the upgrade fine, Click None. Minor cleanup unavoidable but heck a lot better than of re-install all the softwares.
Sometimes you may find the machine run slugglish by doing that. I am not sure why.
You may flash the new ROM, re-install all the softwares, see if the machine run faster, but few days later, you will feel it run slugglish. I am not sure why. (The laptop runs runs much faster than once I bought it and take it home and installed with applications.)
So I just keep buying new machines... hahaha
holy moly.
going great at 10% of flashing.
but i feel confident the tute was on the spot.
muchos gracias.
And yes you are right (you didn't say it but you must have thought it), I could have added it myself to WIKI. But just had to try it myself first off course.
And am i right in believing i could have allready replaced some of the graphical files in the dumped "ROM" directory?
Or is it to dangerous at this change because the file size needs to fit?
92%
100%,... first boot screen passed........second boot screen passed....
The audience is in Awe. It works.
Next step, getting familiar with hypercore kitchen.
Thanks for this tutorial.
Now i can safely backup my Dutch rom and test some custom ****..
Regards,
Schmia
And am i right in believing i could have allready replaced some of the graphical files in the dumped "ROM" directory?
Or is it to dangerous at this change because the file size needs to fit?
Click to expand...
Click to collapse
Do NOT change files in the dump directory without proper tools!!!
You will mess up the ROM
When you have a look at the dump directory there are some info files with data for the places in the ROM which need to be recalculated.
Noonski said:
holy moly.
going great at 10% of flashing.
but i feel confident the tute was on the spot.
muchos gracias.
And yes you are right (you didn't say it but you must have thought it), I could have added it myself to WIKI. But just had to try it myself first off course.
92%
100%,... first boot screen passed........second boot screen passed....
The audience is in Awe. It works.
Next step, getting familiar with hypercore kitchen.
Click to expand...
Click to collapse
Thanks! I'm happy that it worked - nice feeling - eh?
Dumping Elf WM6 Italian version ROM
Before trying to put new Rom images, i would like to backup the original one.
I followed the (simply) tutorial, but i'm confused about this step:
"need the ruu_signed.nbh from valid update (extract with winrar)"
Which file do I need?
I don't understand why I need a valid ROM when I'm trying to dump a Rom from my Elf
Can I use an other language ROM version (English, Dutch....) or is needed only an Italian one?
Thx in adv and sorry for my poor english
Ciauz
junkyarddog said:
Before trying to put new Rom images, i would like to backup the original one.
I followed the (simply) tutorial, but i'm confused about this step:
"need the ruu_signed.nbh from valid update (extract with winrar)"
Which file do I need?
I don't understand why I need a valid ROM when I'm trying to dump a Rom from my Elf
Can I use an other language ROM version (English, Dutch....) or is needed only an Italian one?
Thx in adv and sorry for my poor english
Ciauz
Click to expand...
Click to collapse
you need this as a "shell" or "template" because the .nbh files are made in a way that cannot be recontructed (so far I understand - correct me if I'm wrong).
And yes you can use an ROM with another language. I took the Australian ROM - look at the first paragraph "files you need"
This is usually a .exe file that you can extract with winrar (or winzip maybe)
P.S.: your english is not so bad
r0p3 said:
you need this as a "shell" or "template" because the .nbh files are made in a way that cannot be recontructed (so far I understand - correct me if I'm wrong).
And yes you can use an ROM with another language. I took the Australian ROM - look at the first paragraph "files you need"
Click to expand...
Click to collapse
Thx very much!!!
All worked fine, flashing the "new" dumped rom worked perfectly, I'll put it on FTP to make it avaiable to other users.
Ciao
r0p3 said:
Do NOT change files in the dump directory without proper tools!!!
You will mess up the ROM
When you have a look at the dump directory there are some info files with data for the places in the ROM which need to be recalculated.
Thanks! I'm happy that it worked - nice feeling - eh?
Click to expand...
Click to collapse
Pfew thanks, nice knowing this. Iwas allready worried that it would need correct file info.
junkyarddog said:
Thx very much!!!
All worked fine, flashing the "new" dumped rom worked perfectly, I'll put it on FTP to make it avaiable to other users.
Ciao
Click to expand...
Click to collapse
Don't upload to XDA. I've seen some directories with full roms on FTP. But this is no longer allowed and files will be deleted.
XDA's allready been in trouble with MS about this. So either use third party file sharing or privatly owned FTP.
r0p3..
So to get the radio and SPL do i need to redo first extraction but then for these files? Or are these IPL/SPL?
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01
Noonski said:
r0p3..
So to get the radio and SPL do i need to redo first extraction but then for these files? Or are these IPL/SPL?
| 3.06M (0x30fc00) Part00
| 3.06M (0x310000) Part01
Click to expand...
Click to collapse
I don't know yet - I still have to dig in the wiki about that.
It's very dangerous in this area - if you mess up IPL or SPL your baby is usually lost forever. I don't mind about those as long pof's USPL works beautiful.
Radio might be not so critical. But 2.97. is already available - so it would only be for the fun of it