Database Info

HTC Tytn / Hermes - Blackberry Connect Client

If anyone is interested in getting Blackberry Connect working on their Hermes / Tytn / etc, take a look at:
http://www.sems.org/entry.asp?ENTRY_ID=162
It works nicely... I tested it with both BES and BIS.

would love to try this out, but the second link doesnt work.

They must have changed the link. I'll dig up the page I found it from.

It looks like they are temporarily putting the files to the link I put up. I updated the post, go to:
http://support.vodafone.de/index_l3_2z.html and download it under VPA Compact II, Desktop Manager 2.1 für VPA compact II (13,7 MB), it is the same thing.

Thanks for the link. One more thing, will this only work on vodafone, or can I use it on TMO in the U.S.?

I tried to use it for Cingular but it says Blocked - Radio in use. Any suggestions?

I tried to use it on T-mo usa. It registered fine and t-mo saw the new pin, but T-Mo won't let me change my handheld. I've been running into this trouble recently with T-Mo. I'm guessing they are blocking all non-blackberry devices or not authorized by T-mo USA to register on their network.

Ok got it setup but I get a conflict from my phone trying to connect to wap.cingular and when signed on I dont get my e-mails throuhg balckberry.net.
Is there any way that both can coexist on this phone happily?

Can anyone confirm the Vodafone Blackberry solution works for Tytn ? Tmobile USA with BES server? That's the only condition that I will go with Tytn. Thanks.

Can anyone confirm the Vodafone Blackberry solution works for Tytn ? Tmobile USA with BES server? That's the only condition that I will go with Tytn. Thanks.

BBC and Cingular Conflict
decepticon said:
Ok got it setup but I get a conflict from my phone trying to connect to wap.cingular and when signed on I dont get my e-mails throuhg balckberry.net.
Is there any way that both can coexist on this phone happily?
Click to expand...
Click to collapse
Did you figure out how to run BBC with the TyTn? I am new to the TyTn and I have the "Blocked - Radio in Use" problem. My UTMS symbol does show something is continuously connecting to network, but so far I cannot find the program.
Thanks in advance
Kevin

kwsmith6 said:
Did you figure out how to run BBC with the TyTn? I am new to the TyTn and I have the "Blocked - Radio in Use" problem. My UTMS symbol does show something is continuously connecting to network, but so far I cannot find the program.
Thanks in advance
Kevin
Click to expand...
Click to collapse
Change the Band to GSM only. BB Connect does not work over UMTS (..yet).

I have BB connect working fine via UMTS and GPRS - I dont have a strong enough signal at my house to get UMTS / 3G, but when I get closer to town the TyTn automatically switches to UMTS / 3G and BB still works fine.
I am using a HTC Rom with a Vodafone blackberry enabled account and synced to the BlackBerry Exchange server

If it says Radio in use that mean that you probably have another program that's actively using the gprs connection (i.e. Direct Push)
I'm also using the tytn with a Tmobile US sim.
I dont know what you guys are talking about when you say you get a "New Pin detected" Message.
When I go to BB Webclient through tmobile.com, it shows my old pin number in there. And I cant change it.
Do you actually have to setup a webclient account, or it's supposed to work as long as you are provisioned for blackberry.net?

Blackberry Coonect Spv 3100
Hi there I have a SPV 3100 with a WM6 cooked Rome. Has anyone managed to get Blackerry connect to work with orange uk
Manythanks
steven

Blackberry Connect
Hi there,
has anyone managed to activate the blackberry connect on the orange spv m3100.
i have contacted orange they say they dont support it but they have activated the blackberry apn on the account.
i know some people have managed to do it any help appreciated.
someone said that due to rim checking imei and network if network does not support they stop the connection. does any one know
i want to use it with BIS
many thanks
steven

BlackBerry Connect 4 for Hermes/TyTN: .CAB file anyone?
Hey - anyone have a .cab file of BBConnect 4 for Hermes/TyTN? I am on a corporate PC that does not run Windows installers (paranoid IT guys).

siros said:
Hey - anyone have a .cab file of BBConnect 4 for Hermes/TyTN? I am on a corporate PC that does not run Windows installers (paranoid IT guys).
Click to expand...
Click to collapse
http://www.sems.org/entry.asp?ENTRY_ID=248

BBConnect + ActiveSync Direct Push coexistence
Hi -
I've got BBConnect v4.x on a Tilt/Tytn II, partly coexisting with ActiveSync Direct Push. This is using a T-Mobile SIM, subscribed to the BlackBerry Enterprise plan (unlimited data, plus access to BES gateway).
I say "partly coexisting" because typically either ActiveSync is getting direct push of new items or BBConnect is actually connected to the company BES. When ActiveSync is "winning", BBconnect typically shows "blocked" (and may say "radio in use"). When BBconnect is "winning", the phone will report that it can't "dial" its data connection.
But sometimes both are working simultaneously...
What is the magic incantation so that they will start up in the right order and both work at the same time?
Many thanks,
Jay

Treo 750, IE has cinguar proxy hard coded in reg

Hey all. I just wanted to give you a heads up. I started a thread on Hofo a day ago. There are actually two about this topic now.
Appearently Cingular had the wireless.cingular.com proxy set on IE. It's in the registry, not in the connection profile. The default connection profile is still wap.cingular without the proxy, but IE will use the proxy.
I assume they did this so that IE could access http://device.home/ the Media Net site, which you need the proxy to access. They did something else to make IE really work right with Media Net, so that's good, but you can't disable the proxy.
This has a few ramifications:
1) IE is slower due to the proxy.
2) The proxy may compress images.
3) You can't access the internet from IE using a Wifi card or if you change your access point to isp.cingular
I started deleting IE connection settings in the registry and managed to disable it. I screwed up the WAP settings in the process. So I have to isolate the registry setting(s) that are specific to this proxy.
It's something we should all do (disable the proxy.) You can still acess it by changing to the MediaNet connection profile should you want to later, but trust me you don't want the proxy set all of the time in IE.
Unfortunatley IE's settings don't have access to edit the proxy setting in IE, it's in the registry only. At least so far I haven't found a setting.
I'll keep you posted. My Treo 750 is appearently defective and I'm working on getting it swapped, so I'm going to be tied up with solving this for at least a day.
Here are two of the threads:
http://www.howardforums.com/showthread.php?p=8553147
http://www.howardforums.com/showthread.php?t=1085384

RF9, just like I posted on HowardForums, please keep us all posted.
Thanks!

I isolated it. To disable the cingular proxy setting in IE:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\Curre ntVersion\Internet Settings]
The default setting (that uses the proxy) is:
"EnableAutoDetect"=dword:00000000
Change it to:
"EnableAutoDetect"=dword:00000001
Or simply delete it. It's more of the fact that if it's there and =0 it's used. if it's missing it's not used. But changing it to =1 will also make it disable. This way you can simply change the value back without re-adding the seting back in.
Full details are in my post here:
http://www.howardforums.com/showthread.php?p=8555248#post8555248
I will attempt to .cab an .xml file that will allow you to import the change without a registry editor.

Is this key there right after a hard reset or does it only appear *after* the SIM is installed and the device is turned on?

gamescan said:
Is this key there right after a hard reset or does it only appear *after* the SIM is installed and the device is turned on?
Click to expand...
Click to collapse
I'm really not sure at this point.
I finally got this registry edit (or "Hack" if you prefer) in to a .cab file that you can download and install without ever installing a registry editor.
It's perfectly safe to use. There are two cab files.
1) To disable the existing proxy server setting
2) To restore the proxy server setting back to the default state.
All it does is change the existing registry value from 0 to 1.
Get it here:
http://www.gadgetech.info/treo/hacks/disableproxy/index.shtml#Download:
Download the two .CAB files to your Treo 750. Just click on it to install it like you would any other .CAB file.
To verify that it's installed. Try to browse to http://device.home/ . If you can get to it the proxy is enabled. If yoiu can't, it's (most likely) disabled.
If you use isp.cingular or a wifi card, of course it will only work if it's disabled.

gamescan said:
Is this key there right after a hard reset or does it only appear *after* the SIM is installed and the device is turned on?
Click to expand...
Click to collapse
I just verified. These settings are NOT there before the SIM is inserted. Only after the SIM is registered (SIM inserted, and phone turned on) do those settings become enabled.
Good catch. So it's not hard-coded. It's a carrier preference. I would assume that if I put a non-cingular SIM in the phone this setting would disappear. Palm does specified configuration based on the SIM inserted on thier Palm OS line, I assume they've done this on WM5.
I've been through the MSDN documentation and there's a whole big section devoted to carrier provisioning which is what this is.

other way round
Hey,
I'd like to know if there is a solution to give the PIE a special proxy setting via the registry.
Due to some restrictions i am forced not to make general proxy settings in the connection manager, but i want the PIE to route via an proxy. Since PIE doesn't provide a proxy setting within the program i'm wondering, if there is the possibility to do so in the registry....

anyone know how to copy ROM files?? I found a DLL and registry entries for "PorkPie.dll" in the \Windows folder that I think is responsible for the cingular proxy hard coding and other customizations.

RF9, I noticed your Fido logo in your profile... Have you managed to get IE to work with a Fido SIM using this method?

Pls help : Unlocked Treo750 - Not able to view websites
Hi - I bought unlocked Cingular treo750 from US and now using in India. Have setup my ISP and using the Internet. I can now download my emails, use Pocket MSN but unfortunately not able to see any website on IE. It keeps says "Locating" to any kind of website I want to view.
The problem is only on viewing websites. IMAP email and Pocket MSN works perfect therefore I presume the connection is perfect.
Could you please help me on this.
After some time - The message appears "Page can not be downloaded as the connection was lost..."
Thanks very much.
Manish Vij

Treo 750 Proxy Disable
Hi RF9
I have been following your thread on getting a treo 750w from Cingular to work on the Fido network. I have tried to change the registry settings as you have described:
- <wap-provisioningdoc>
- <characteristic type="Registry">
- <characteristic type="HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings">
<parm name="EnableAutoDetect" value="1" datatype="integer" />
</characteristic>
</characteristic>
</wap-provisioningdoc>
I got the download, but I am afraid I am not familiar enough to know how to install the changes on my phones software. Could you please do a more step by step explanation for me (us). Everything works on my Fido phone except when I go to a web page I get: "connecting" "locating" and then "page cannot be displayed".
Many thanks for your help. Ian

beispielwiese said:
Hey,
I'd like to know if there is a solution to give the PIE a special proxy setting via the registry.
Due to some restrictions i am forced not to make general proxy settings in the connection manager, but i want the PIE to route via an proxy. Since PIE doesn't provide a proxy setting within the program i'm wondering, if there is the possibility to do so in the registry....
Click to expand...
Click to collapse
Did you get this to work? I'm Using hamachi mobile now and would like to use a proxy i have setup on my network.

Enquiring Minds
Please forgive my lack of technical savy; I am really struggling to learn all of this stuff...so my questions might seem a bit "stupid"... (it's just my old age showing!
Could this proxy thing be causing my problems in accessing bank of america's website? I was able to do so just fine on my old Treo 680, nad my AT&T Tilt (I hated that phone!), but on my 750 with WM6, I keep receiving a message that says "For security reasons, your device can't access Mobile Banking" I also cannot access other banking sites as well.
If so, will making these changes cause other issues?
Thanks for your patience and information. You folks here are the best!
Tom

tommc4 said:
Could this proxy thing be causing my problems in accessing bank of america's website? I was able to do so just fine on my old Treo 680, nad my AT&T Tilt (I hated that phone!), but on my 750 with WM6, I keep receiving a message that says "For security reasons, your device can't access Mobile Banking" I also cannot access other banking sites as well.
If so, will making these changes cause other issues?
Thanks for your patience and information. You folks here are the best!
Tom
Click to expand...
Click to collapse
Tom, I just tried www.bankofamerica.com and I got into it fine. So this does not seem to be the problem.

About your unit...
Thanks for the reply!
Are you using an AT&T branded 750 with the WM6 upgrade, or a generic or other branded 750? I have the AT&T branded one.
Thanks again for your reply!

tommc4 said:
Thanks for the reply!
Are you using an AT&T branded 750 with the WM6 upgrade, or a generic or other branded 750? I have the AT&T branded one.
Thanks again for your reply!
Click to expand...
Click to collapse
Yes, I have the at&t branded with the official WM6 upgrade also. I do have the at&t CapPackage removed per the instructions on this site but all the MediaNet dB is intact.

Cap Package?
I have not heard about that one? Can you elaborate, or point me in the rigt direction? Thansk!
Tom

RF9, this is very similar to what I'm experiencing, but when I go to "HKCU\Software\Microsoft\Windows\CurrentVersi on\Internet Settings" the EnableAutoDetect value is already set to 1.
I have the AT&T Tilt, which came with WM6.
Here's my problem thread : http://forum.xda-developers.com/showthread.php?t=352064
Thanks.

Hi RF9,
I saw this thread and tried your .cab file on my treo 750 and now my internet explorer is running sweet! ive been having the problem for some weeks now and im truly happy that finally my treo is fully functional using softbank AP here in Japan....
a lot of thanks to you!

Razor1973 said:
RF9, just like I posted on HowardForums, please keep us all posted.
Thanks!
Click to expand...
Click to collapse
Hi to All;
Im sorry if im posting this email on a wrong thread. My apologies am not very familiar with this type of threads. I would like to ask for any assistance on my Mobile fone. I bought a Treo 750 AT&T from a friend who works in the States who brought his mobile fone here in the Philippines. I am now using the Treo 750 here in the philippines using a local network provider. I can send sms using the local network but I can't seem to connect to the internet and can't even send an MMS. Ive have tried hopelessly but there would always b e a promp which says" Connecting to : AT&T , connecting to GPRS,3G.." and it can't connect...I also tried to access yahoo and internet explorer but the same thing, could'nt access as well. I tried to ask assistance from the network's wireless center but they said that they could not help me on this problem either. I am no left with an expensive mobile phone with a lot of features, but couldn't use them. I hope somebody can help me with this type of problem.
Best regards,
Abrille

Just got a Touch Cruise

I am a long time reader newer poster. I am coming from a Treo 750. Is there anything I should do to this before I start adding my apps and transfering contacts? Is there a better backup of my Treo other than the Windows Vista Sync? I am mainly concerned with contacts and software. Also I am on Att I heard about the only thing I need to do is swap Sim card out, also should I adjust the wap settings for this to work. [email protected] password CINGULAR1. Also does it matter when syning new device the device name be the same? What is the best ROM I should have?

ATT
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.

Coming from my 750, I didn't have to do a thing - just stick in sim card and I was good to go. I am on the PDAConnect plan so no issues with proxies and such.
As for backup, use Sprite. It comes with the Cruise on the CD.

Thanks I will do that. I should have it in my hands tomorrow morning.

mpf54 said:
I also use att and all i have to do is set up the network to use media net and tell it under advanced to not use the proxy. It should work fine for you then. I am using Bepe rom 6.3 premium. The connection wizzard sets up right for ATT in the us except fothe proxy. you do npot have to enterthe wap settings they are there already.
Click to expand...
Click to collapse
I got my phone installed bepe rom premium, I thought I got all of the att settings correct I am able to receive sms and email but for some reason It only has edge when before the rom i was getting hsdpa and 3g speeds. can you please take me through a small tutorial of what excat settings I need in the connections panel. I have only 1 listed MEdiaNet I then went to the advanced network and it says: turn on HSDPA it is checked, GPRS PAP authentication is checked, CSD Line Type data rate 9600 bps(v.32) connection element Transparent, SMS Service SMS over GSM. What else do I need to do? Please help
Also under comm manager it shows no data connection available?????
I figured it out. I removed all settings and went through the connection wizard. Also I forgot to change the band type to auto, that is why I would only get edge speeds. I wasnt sure about the proxy settings, I was supposed to checkit not uncheck it. and found the server settings and port numbers. Thak for everything. This phone is so much better than the treo 750. Well worth the money. No more square screen for me.

Out of curiosity what do we need to set the proxy to? Is this for using tethering or something else? I am on ATT as well and the auto network configure app thing seems to have set it all up correctly. Is there anything additional to be done?

O2 MMS settings

Just started getting a problem with the MMS on my Serra and not sure if anyone can let me know theirs please.
Under connections/My ISP I have
Mobile Web - Cellular Line (GPRS,3G), mobile.o2.co.uk, o2web/password, DNS 193.113.200.200, Alt DNS 193.113.200.201
Mobile Web 2 - Cellular Line, mobile.o2.co.uk, o2web/password, DNS 193.113.200.200, Alt DNS 193.113.200.201
My Work Network
02 Active - Cellular Line (GPRS, 3G), wap.o2.co.uk, o2wap/password, user server specific
MMS Settings
o2uk - Gateway 193.113.200.195 port 8080, server address http://mmsc.mms.o2.co.uk:8002. Connect via My ISP
Thanks

Sorry all fixed myself, my proxy settings were incorrect

What exactly was the error - I still cannot get MMS to work even with your seetings from your post?

I found out that mine was that a proxy server was enabled. I hook mine up to my laptop while in the office to charge and activesync with my Exchange server. Hadn't realised that it also enables my office proxy server.

crazyC, is the SIM in your Serra on O2 contract or Pay and Go? I'm guessing it's the former, but if it's the latter I know the settings...
Is it just MMS that's not working, or is your data connection (via telephone I mean) not working either?

It was just MMS that did not work.
I am on contract, and after a lot of digging and trialling of cabs that should have fixed it, but didn't, I have sussed it out and tested it.
I will roll the settings into my O2 setup cab, test it, and then post it if anyone wants it.

YES! Please post it.
I am using these settings on my contract o2, htc touch pro. all my 3g and internet works... just no mms.
I have sat here for four hours now messing around with it...
any chance of posting the settings that worked for you?

Try this
MMS Settings
o2uk - Gateway 193.113.200.195 port 9201, server address http://mmsc.mms.o2.co.uk:8002. Connect via My Work Network
Other connections as per the normal O2 set up.
'My Work Network' shows up as O2 Active
Dont forget to set the O2MMS server as the default under MMS options

I havent tested this yet, but this cab SHOULD insert the O2 MMS settings - note you must already have the correct O2 network setup for calls and data, this is just the MMS bit.

im also having prblems with this, using the new Elite RC4. Im gunna reflash it and try again cuz i have fiddled with the settings too much
Edit - i tried the cab and the setting listed above it and neither worked for me

I have called O2 to see if they can help me and they sent me the some lame ass intruction which are exactly the same as on here... except afte you set up the o2web settings it says to use auto download for the rest :/
Whats the deal witht he proxy for the o2 active settings are they supposed to be on or off and if on, what do i set them as?

Installed the original O2 ROM to get all the settings working properly. It seems the missing details are in the WAP Proxy ones.
start - settings - connections - connection settings - manage existing under the 'my work network' (or whatever you renamed it too) - proxy (ensure use proxy is ticked) - advanced
WAP - 193.113.200.195:9201
SECURE WAP - 193.113.200.195:9203
Other than that settings are as they have been mentioned previously

MMS issues
I have extensively searched forum after forum and this seems to be the only thread with the sort of info i am searching for. I have installed TPC V3.1 Rom With required radio, everything works including MMS, however, no matter what settings i try i cannot receive normal sized pictures and any MMS videos go straight to the O2 website and all i get is a message your phone is not compatible with this type of message. Can anyone help, its really annoying............
I have tried the above .cab file and it doesn't work for me either.
Thanks in advance for any help.
O2 serra (raphael) win6.5, TPC v3.1 radio 1.14.25.05

Kevfm said:
I have extensively searched forum after forum and this seems to be the only thread with the sort of info i am searching for. I have installed TPC V3.1 Rom With required radio, everything works including MMS, however, no matter what settings i try i cannot receive normal sized pictures and any MMS videos go straight to the O2 website and all i get is a message your phone is not compatible with this type of message. Can anyone help, its really annoying............
I have tried the above .cab file and it doesn't work for me either.
Thanks in advance for any help.
O2 serra (raphael) win6.5, TPC v3.1 radio 1.14.25.05
Click to expand...
Click to collapse
Try some of these reg edits.

Thanks, but that is more for increasing the send size limit of mms, I can send them fine, but my network O2 cannot determine what phone I have and therefore only allows me to receive the smallest possible sized attachement.
I have tried numerous settings and radios to adjust this I've even tried the get settings feature and I get a txt back sorry we are unable to blah blah blah. with out going back to O2 stock rom i'm running out of options.......
Also I have never attemped to edit the registry
Again thank u for your reply......
EDIT......
Attempted reg edit, has had no affect, am I doing something Wrong.......?

o2 mms size problems
crazyC said:
I havent tested this yet, but this cab SHOULD insert the O2 MMS settings - note you must already have the correct O2 network setup for calls and data, this is just the MMS bit.
Click to expand...
Click to collapse
Hi guys, I have entered all the settings found on here and my mobile web and mms work but the mms messages received are resized to a tiny default size as mentioned on here.
Any chanch of an idiots guide to edit the registry so that o2 think it's another phone allowing me to received full size pics.
My phone is a Vodaphone UK HTC Touch Pro2 with O2 Pay Monthly Sim.
Any help is appreciated

Fuze - VPN to Compnay Network - Remote Desktop Works, Intranet browsing does not

I have the AT&T Fuze with the stock ROM. I purchased it the first day it came out. I think this was 11/11/2008. I have the PDA Personal plan for unlimited data. I have things set up so that my contacts and email synch with our Exchange server. I can remote desktop from my Fuze using the data network to any machine that I can remote to from my computer, so from that, I am thinking VPN must be configured correctly. On one of these machines that I connect to, I have IIS running and put a very simple web page on it (no script, nothing IE specific). From my work computer, it loads fine. I can remote desktop from my Fuze to any machine on the network and launch IE and load it. But, I can't load it directly from my Fuze in either Opera or IE. It does initiate the VPN connection. But, then I get the error HTTP gateway timed out. I'm really not interested in viewing the page that I created. We use Perforce, which is source control system. It has a jobs portion, which we use to track bugs. There is a web interface to the jobs, which is on the intranet, not internet. I don't have rights to remote to the Perforce server, and that is why I initially tried putting a simple page on a machine that i am an admin on. I want to be able to click on a link in my email and have it load the bug in Opera. If I am home and turn on WiFi, and disable the data network, this works fine. This bypasses AT&T's machines, which makes me think there is something that AT&T is blocking. And if they are, then maybe it is the AT&T bloat this is telling them what it is. Our IT guy has verified that I am successfully VPNing in. He is seing the mycingular.net in the firewall.
My boss has the same phone, but purchased more recently, and his is working fine for this. He has flashed the new AT&T test ROM, and done the thing that keeps the AT&T bloat from getting installed.
The fact that remote desktop works, but browsing a webpage on the same machine does not, makes me think there is more to this than just network settings.
If anyone has the anwer to this, please share. If I find the answer, I will post it is well. I have extensively searched the forum for the answer to this, and have not found anything that worked. If I have missed something, I appologize.

Sort of works now, still have an issue
After going to the proxy tab, and checking that This network connects to the Internet and checking the check box that this network uses a porcy server to connect to the internet. Then specify the server. Then go to Advanced and change the HTTP port to 8080 instead of just 80. I also put the user id, password and Domain in on the proxy for HTTP.
But I get prompted for a user id and password from the proxy erveer. I have entered it and clicked the checkbox to save it. It does not display the same info that I entered the next time and it does not display what was entered on the HTTP proxy page. It is a drop down, and I can select the correct one. It's just annoying to need to. I'd like to clear this cache.
Also, to initially get it working I had to disable HSDPA and HSUPA, restart. Then reenable it. I have the registry on my Fuze which give me the menu option on the Advanced network tab to do this.

Figured out how to clear the cache issue - still prompts
The cache was a setting in Opera for passwords.
It still asks for the password. At least it is prefilled with the correct info, since I now only have the one entry, so it is just 1 click, but I should not need to do this step.
Any one know what I need to do to fix this.
If I try to load it in IE, it just tries but never succeeds and never asks for a password, just says Opening.

Connections
Why should I need to set this to connect to the Internet, and use the ISA server? I would think if it needs to connect to the internet, it should be able to just use the Media Net
My Media Net Settings are
Modem -
Name - Modem
Media Net - wap.cingular
Advanced shows the modem in the drop down list as Cellular Line (GPRS, 3G)
The drop down is disabled
Next
Access Point Nam - wap.cingular
Next
User name - [email protected]
don't know what the password is. I've never changed it.
Domain is blank
Next
TPC/IP
Use server - assigned IP address is selected
Use software compression and use IP header compression are checked.
Use slip is not checked and the checkbox is disabled
Servers
Use Servr Assigned addresses is selected
So DN,Alt DNS, WINS, and ALT WINS are disabled.
Proxy Settings
This network connects to the internet
This networks uses a proxy server to connect to the internet is not checked.

More info and additional question
Navigating to some intranet sites does not prompt me for the isa server.
such as http://machine/virtdir/Default.aspx
seems to work without being prompted
but
http://perforcemachine:8080/@md=d&cd=//&[email protected]//?ac=107&mx=25
prompts me for the password.
Also, in order to get either of these links to work, I need to have in my exceptions:
*.companyname.com/*
Where companyname is the actual companyname.
This is annoying because it makes it connect to the VPN when synching with the exchange server. Before I want on the quest to get these links to intranet sites to work, I synched with the exchange server without connecting to the VPN.
I've tried putting in isa.companyname.com in the exceptions, but that doesn't work.
Is there a way to do *.companyname.com/* except mail.companyname.com?
I suspect all of this is in the registry somewhere.