Hi guys,
I've got the Orange Branded Trinity (aka SPV M700). I've pair my BT headset HBH-660 with my trinity and I've observed some curious behaviour.
I've recorded some Entry with Voice commander to call my wife.
I need to push the button opn the headset to active Voice commander.
I4ve observed some curious behaviour because when the phone and the BT stack are not used for a while, when I push the button to open Voice Commander nothing happens the phone doesn't wake-up.
The only way to solve my problem is to switch On-OFF-On the BT stack.
Did some else have the same problem ?
If yes dis you solve it and how ?
falex
Related
Hello,
I'm using an Atom with WM2005 and the BT headset R35 from i-tech. This allows you to control the wm player via bt. By starting the voicedial from the standard button on the BT HS, i encounter unbearable sound problems and the sound from MS Voice command 1.6 is not transmitted at all... I don't know why, but that's the case.
When I start the voicedial from my phone instead all the rest works perfectly via BT. Means, I can not use the standard button from the BT HS. Therefore my idea: Activate voicedial from a different BT button, there are enough, for instant the one that pause and resumes the wmplayer. The button also wakes the phone up.
Any idea if this is possible? can i change a registry entry to handle this event or use a tool, like the one to reprogram the hardware buttons???
Any experiences, or similar problems?
Cheers
Ellork
I've searched everywhere but cant find a solution to this: I bought the HTC wired usb headset for the Tilt. With Cyberon voicedial, the button on the headset would activate the app and worked perfectly. As I prefer MS Voice Command, I then went ahead and uninstalled Voicedial and installed VC, but button doesnt work now. Anyone know how to remap the headset button to voice command?
Try this reg, should do it.
Thanks, I'll give it a try...what changes does it make?
Sometimes after installing MS Voice Command you need to do a reset once or twice before the BT headset is reconized properly. (battery out and back in...) And, some BT headsets don't work well at all. MS's BT driver set has a history of being bad.
I think you misread my post...I was asking about the WIRED headset, not the BT one.
okay my question is that the software that came with my tilt- voice dail thing,cyberon will only work if I activate it by clicking the icon, however, I can't start it with a BT headset that I have, can anyone help?
well first fo all did you even activate it for you to use it?
Did anyone manage it to run MS VoiceCommand via a bluetooth headset on this device?
Ok, I installed the latest version of voice command on the new O2 XDA Orbit 2.
It works good with the bluetooth headset without any patches.
However call notification does not work. Does anyone have any idea for that?
How can I disable Voice Command and make all sound being routed to the headset?
The solution with Mortscript (posted somewhere else in this forum) does not work... any other idea?
ulischultz, how did you manage to get ms voice command to work? I've got the HTC Touch Cruise, and I can't get MSVC to work via bluetooth. Works fine on my AT&T tilt with no hacks.
Dave
I am having the exact same problem: voice command works but will not announce incomming calls. I can't believe how much I've become dependent upon this feature. As for getting it to work, there was nothing special that I had to do other than install it and soft boot.
http://www.jetwaremobile.com/
I was having problems with some random disconnects of my TC from the car Parrot 3200LS BT Handsfree CarSystem.
I found this program mentioned on another site(http://www.htcwizardweb.net/node/456 ):
JETware Mobile (http://www.jetwaremobile.com/
I installed the trial today and so far it appears to be making a significant difference with the TC and MS VoiceCommand.
T
Hi together,
after all my cruise is now working quite good, and even the odd bt-headset problem is solved after installing the two bt-patches (I´m using Bepe V.0.67).
But now: I can´t commander voice command while pressing the speak button of my Nokia BH-602 headset. This worked before installing the patches.
So: Headset works, but without vc function.
Anybody got a workaround for this problem? Than cruise is almost perfect for me.
Thanks
amcom
That function did not work with my Jabra BT3030 before and still doesn't after the hotfixes.
edit: actually on further mucking about it does work. I have both BT hotfixes installed and it now works.
voice commander now works with my plantronics headset but it never ever dials the right person.. I had a blackberry pearl before this phone and the voice dailing worked even when using a power tool, but the one on HTC sucks real bad
OEMAGW.dll
After patch, OEMAGW.dll chanched, 2x Bigger.
I also want to run MVC BTbutton
This for OEM progs working, but sounds out device speaker
"Path"="\\WINDOWS\\voicecmd.exe"
I found a solution, working for me. After reinstalling an original ROM without MS VC implemented I installed VC seperate. After that I installed a small programm called jetware mobile. This programm routes all signals to the headset.
So everything works fine now. I´m happy, hope you´ll be too!
amcom
Hi. First of all thanks for this wonderfull and usefull site !!! The BEST !!!! I have a problem that I can't solve without guru's help. I have 3 HTC pocket pc, a TytnII, a Touch Diamond and a Touch Pro. All of them uses original WM6.1 Italian rom.
The Touch Pro (Raphael/P7272) and TytnII have installed Cyberon Voice Dial 1.2, that works via tags. I have intalled on the Touch Pro the Cyberon Voice Commander 2.5.1 software and all works fine without bluetooth headset. When I switch on bluetooth headset and I press the headset button, Voice Commander start and I can hear the "Say command" prompt in the headset speaker, followed by the "beep" that start the timer to talk. And then... the problem: headset microphone does't trasmit audio stream to the ppc !!! The program wait for the command, but the mic seems to be OFF. I have installed the same software on the TytnII and all works fine also with the same headset. Now... Where is the problem? I think that the problem can be in a registry setting but all seem to be right... Than I think the problem may be in Audio Gateway dll, OEMAGW, or in the bt driver, btavdp... I have extract the dll from the TytnII rom and I have used disassembler to view unknow registry entry access... I have also try to use TytnII dll on the Touch Pro without success... I need help...
Questions:
1) Any ideas ???
2) Is there a kind of registry monitor that can trace audio driver registry access ?
3) Is there a registry setting that enable debug log for bluetooth driver ?
4) Where I can found a list of AT Bluetooth command ?
5) Last choise... Is there a cocked ita rom for the touch pro that already use CVC 2.5.1?
Thanks to all.
Bye.
Ps: sorry for my poor English...
Hi.
Is there anyone that use Cyberon Voice Commander 2.5.1 on HTC Diamond or HTC Touch Pro with bluetooth mono headset ???
Thanks all.
I cannot find my Plantronics Voyager 855 Bluetooth Stereo headset on my Touch Pro. Can you pair bluetooth devices without problems and if so, what radio are you using?
Hi Zyborg. No, I have no problem with headset connection... Radio version is 1.02.25.19.
Bye
I wonder if someone found a fix for this? I tried voyager 855 and Samsung wep 301, none of them worked ( mic not working ). Bluetooth did pair, but can not even do a sound recording through the BT headset mic. I have also tried almost all the new roms.