Hi. First of all thanks for this wonderfull and usefull site !!! The BEST !!!! I have a problem that I can't solve without guru's help. I have 3 HTC pocket pc, a TytnII, a Touch Diamond and a Touch Pro. All of them uses original WM6.1 Italian rom.
The Touch Pro (Raphael/P7272) and TytnII have installed Cyberon Voice Dial 1.2, that works via tags. I have intalled on the Touch Pro the Cyberon Voice Commander 2.5.1 software and all works fine without bluetooth headset. When I switch on bluetooth headset and I press the headset button, Voice Commander start and I can hear the "Say command" prompt in the headset speaker, followed by the "beep" that start the timer to talk. And then... the problem: headset microphone does't trasmit audio stream to the ppc !!! The program wait for the command, but the mic seems to be OFF. I have installed the same software on the TytnII and all works fine also with the same headset. Now... Where is the problem? I think that the problem can be in a registry setting but all seem to be right... Than I think the problem may be in Audio Gateway dll, OEMAGW, or in the bt driver, btavdp... I have extract the dll from the TytnII rom and I have used disassembler to view unknow registry entry access... I have also try to use TytnII dll on the Touch Pro without success... I need help...
Questions:
1) Any ideas ???
2) Is there a kind of registry monitor that can trace audio driver registry access ?
3) Is there a registry setting that enable debug log for bluetooth driver ?
4) Where I can found a list of AT Bluetooth command ?
5) Last choise... Is there a cocked ita rom for the touch pro that already use CVC 2.5.1?
Thanks to all.
Bye.
Ps: sorry for my poor English...
Hi.
Is there anyone that use Cyberon Voice Commander 2.5.1 on HTC Diamond or HTC Touch Pro with bluetooth mono headset ???
Thanks all.
I cannot find my Plantronics Voyager 855 Bluetooth Stereo headset on my Touch Pro. Can you pair bluetooth devices without problems and if so, what radio are you using?
Hi Zyborg. No, I have no problem with headset connection... Radio version is 1.02.25.19.
Bye
I wonder if someone found a fix for this? I tried voyager 855 and Samsung wep 301, none of them worked ( mic not working ). Bluetooth did pair, but can not even do a sound recording through the BT headset mic. I have also tried almost all the new roms.
Related
I was reading around about issue using BT headset with the Himalaya (W2003 not second edition!)
I read several people who installed the WidComm stack, but as far as I have understood, with this hack there are still problems with the headset profile (still I don't now which!).
Talking about the standard MS stack, I read people using Nokia BT headset complaining about it loosing connection and turning off after 10 min. Is this a nokia only issue?
It seems that Jabra hs are working well. Is there any known problem with the standard MS bt stack?
Thanx to anyone who will/could help me reorganize my mind...
Regards,
Francesco
I have a bluetake G2 headset. When I had 1.72 ROM and installed Pocket Bluetooth Tools it worked perfectly. Currently I'm playing with SE ROMs and have not yet used this headset with it.
Widcomm stack does not support headset/handsfree profile on our device. It can bond with headset, but you would not hear any sound.
I am still using the MS BT stack with rom 1.72.00.
NO Pocket Bluetooth Tools (I would like to know why mamaich uses these with a 1.72 rom . . .)
NO issues whatoever with both Headset (Headset Protocol) or GPS (Serial Port Protocol).
Just rocksteady . . .
Bluetooth Activesync not working after PBT
Activesync over bluetooth doesnt work anymore after loading Pocket blue tooth tools,( it was working perfectly well till loaded PBT) It doesnt even give me the option of syncing via BT ( the option one normally gets when one opens activesync on the device ( tools menu 1) Options 2) via IR 3 ) Via BT ) now all I find is options and activesync via IR.
Bluetooth HS810 Microphone not working
I am using a Motorola HS810 bluetooth headset with WM2000SE-Sin-Merged-v2.0 on an XDA II. When I complete pairing, 3 pop-ups all happen at once asking various profiles supported by the Headset - Serial, Headset & Handsfree. I answer yes to the hands-free. (It's only possible to see the other pop-ups due to the handy alt-tab applcation supplied with this ROM version!)
The earpiece works just fine, but the microphone does not. I need to speak into the mic on the XDA II to be heard.
...I have now reverted to 1.72.00WWE & all is fine. It seems to be a problem with WM2000SE....
Any ideas?
John
XDA II
Motorola HS810
ROM 2.06.00WWE
Radio 1.18.00
ExtROM Sin.Merged.v2.0
Hi everyone ... It looks like ATOM does not support voice dial over bluetooth - checked it with 3 headets - HBH-660, Jabra JX-10 and Plantronics 640 ... it receives incoming calls directly to headset but fails to launch built-in Voice Speed Dial when you push button on headset ...
It works great on I-mate JAMin and K-JAM (both Windows Mobile 5.0) so i am quite curious why it does not work with ATOM ...
Do we need special patch or new bluetooth driver to make it working - really stupid to use the device without voicedialing ...
Please help :?:
The Atom unlike HTC Devices, has no VoiceDialing from BT Headset Bulitin.
Currently there isnt solution to this menace.
Maybe in the next ROM Upgrade the atom will support this.
Nadavi. 8)
Voice dial over Bluetooth on ATOM
Well i decided to install the patch aimed to launch voice dial over Bluetooth on I-mate JAM or XDA mini (http://forum.xda-developers.com/viewtopic.php?t=23558) which works perefect ... i ran this patch on O2 XDA ATOM and now it launches over Bluetooth standard PHONE application!!!!!! .. I was curious how can i make it working on ATOM given that i can't find Voice Speed dial exe file (only shortcut to this file in Windows/Start Menu/Programs) to copy it to Windows directory .. As you all know our default voice software is Cyberon Voice Commander .. Or we need to adjust the registry to launch it ...Any ideas how ?
The Atom by defaul launches the PhoneApp Once youve pressed the Headset button.
so this patch changed nothing.
Nadavi :roll:
New Problem with VC 1.6 for Pocket PC and Bluetooth. I cannot use VC through the BT headset.
I check the Voice Command configuration and enabled the BT notifications. No joy: commands and notifications just pass through the speaker. My bluetooth headset is a Jabra JX10 Series 2 and it works well during call conversation, but when I press the VC activation button, the commands are "listened" through the Treo's mike. Run simple experiment: If you "cap" the mike with your finger and try to command through the BT headset it does not work. Tried to Softreset multiple times, re-pairing the headset..no joy.
Since it was well advertised that WM6 was carrying the BT voice command feature, I was really disappointed and getting a bit frustrated. Am I doing something wrong? Did I forget something?
Any help is greatly appreciated.
Rob
Configurationalm 750 unbranded. I upgraded it to WM6 (CE 5.2.1239 Build 17746.0.2.4) VC 1.6 for pocket PC
I've had the same issue with my Moto HF850 BT car kit. Eventually the bond "breaks" and the two wont communicate until I soft reset the treo. Wonder if the BT stack is getting updated in this mystical AT&T ROM release?
I made some more investigation on the net and apparently this issues should have been solved by the WM6 ROM release PALM announced. I have installed the generic unbranded but it does not cure the problem. Please let me know if the ATT ROM works or not. This can be very interesting.
I think VC is a great software and I really enjoy it.
I have looked around..Web Forum community is starting to call for VC 1.7 and WM7...we will see.
Voice Command 1.6 issues with BT on palm 750: PROBLEM SOLVED
Since my head is sometimes harder than a granite block I made some further experiment with my Palm 750 Registry and found that the issue is really on the Audiogateway registry.
When VC 1.6 gets itself installed, it modifies the following registry key from:
FROM: (Original Registry without VC1.6)
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway:BTAGExtModule = BTAGExt.dll
TO: (with VC1.6 installed)
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway:BTAGExtModule
=\Program Files\Voice Command\vcbthag.dll
This modification does not work on my palm 750 .
When I have set this registry back to BTAGExt.dll ( I have used CEregedit to make the replacement) my Jabra BT Headset was able to listen and deliver Voice Commands to the device and viceversa the device was able to deliver messages and notifications to the BT headset.
Only missing element is Music: Music is still played through the Palm speaker, but I am fairly happy to make calls handfree!
Better than nothing. I hope this hint will be helpful to others. Please let me know if this works.
Regards
RC
Did anyone manage it to run MS VoiceCommand via a bluetooth headset on this device?
Ok, I installed the latest version of voice command on the new O2 XDA Orbit 2.
It works good with the bluetooth headset without any patches.
However call notification does not work. Does anyone have any idea for that?
How can I disable Voice Command and make all sound being routed to the headset?
The solution with Mortscript (posted somewhere else in this forum) does not work... any other idea?
ulischultz, how did you manage to get ms voice command to work? I've got the HTC Touch Cruise, and I can't get MSVC to work via bluetooth. Works fine on my AT&T tilt with no hacks.
Dave
I am having the exact same problem: voice command works but will not announce incomming calls. I can't believe how much I've become dependent upon this feature. As for getting it to work, there was nothing special that I had to do other than install it and soft boot.
http://www.jetwaremobile.com/
I was having problems with some random disconnects of my TC from the car Parrot 3200LS BT Handsfree CarSystem.
I found this program mentioned on another site(http://www.htcwizardweb.net/node/456 ):
JETware Mobile (http://www.jetwaremobile.com/
I installed the trial today and so far it appears to be making a significant difference with the TC and MS VoiceCommand.
T
Hi together,
after all my cruise is now working quite good, and even the odd bt-headset problem is solved after installing the two bt-patches (I´m using Bepe V.0.67).
But now: I can´t commander voice command while pressing the speak button of my Nokia BH-602 headset. This worked before installing the patches.
So: Headset works, but without vc function.
Anybody got a workaround for this problem? Than cruise is almost perfect for me.
Thanks
amcom
That function did not work with my Jabra BT3030 before and still doesn't after the hotfixes.
edit: actually on further mucking about it does work. I have both BT hotfixes installed and it now works.
voice commander now works with my plantronics headset but it never ever dials the right person.. I had a blackberry pearl before this phone and the voice dailing worked even when using a power tool, but the one on HTC sucks real bad
OEMAGW.dll
After patch, OEMAGW.dll chanched, 2x Bigger.
I also want to run MVC BTbutton
This for OEM progs working, but sounds out device speaker
"Path"="\\WINDOWS\\voicecmd.exe"
I found a solution, working for me. After reinstalling an original ROM without MS VC implemented I installed VC seperate. After that I installed a small programm called jetware mobile. This programm routes all signals to the headset.
So everything works fine now. I´m happy, hope you´ll be too!
amcom