Hi all,
I'm trying to change the hardware keyboard language to Spanish in order to have all symbols correctly in my language.
I have tested:
1) Insert the Locale string with the language code -> it doesn't work.
2) Changing some registry keys with kbdus.dll and compime.dll, but not success at all (everything remained the same).
Somebody with a solution or any idea?
hello,
First solution should work, have you make a soft reset (with power button)
Instructions For Key Mapping
I can confirm that you can change key-mapping for keyboard with some registry modification.
Here are instructions. I use Total Commander for editing registry. These instructions also work for WM5.0 AKU 3.2, AKU 3.3 and AKU 2.3 (tested).
------------------
1. HKCU >> ControlPanel >> Keybd
create string named Locale and put 4-digit code of your keyboard (my german wizard with WM6.0 WWE ROM uses 0407)
2. HKCU >> keyboard layout >> Preload >> 1 >> Default
change value of last 4 digits to your code (in my case, I changed e0010409 to e0010407)
3. HKCU >> keyboard layout >> Preload >> Default
change value of last 4 digits to your code (in my case, I changed e0010409 to e0010407)
4. exit registry editor and continue to operate your device for few minutes. After that, softreset. Caution: sometimes your wizard "forgets" to write modifications to your registry, so repeat this procedure 'till it works.
------------------
If you don't know your 4-digit code, look at the following page, find your country and read LcidHEX code
http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
bye
Robert
rebelyell said:
I can confirm that you can change key-mapping for keyboard with some registry modification.
Here are instructions. I use Total Commander for editing registry. These instructions also work for WM5.0 AKU 3.2, AKU 3.3 and AKU 2.3 (tested).
------------------
1. HKCU >> ControlPanel >> Keybd
create string named Locale and put 4-digit code of your keyboard (my german wizard with WM6.0 WWE ROM uses 0407)
2. HKCU >> keyboard layout >> Preload >> 1 >> Default
change value of last 4 digits to your code (in my case, I changed e0010409 to e0010407)
3. HKCU >> keyboard layout >> Preload >> Default
change value of last 4 digits to your code (in my case, I changed e0010409 to e0010407)
4. exit registry editor and continue to operate your device for few minutes. After that, softreset. Caution: sometimes your wizard "forgets" to write modifications to your registry, so repeat this procedure 'till it works.
------------------
If you don't know your 4-digit code, look at the following page, find your country and read LcidHEX code
http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
bye
Robert
Click to expand...
Click to collapse
I do this but no results and in registry is still saved :S
JouSePo said:
I do this but no results and in registry is still saved :S
Click to expand...
Click to collapse
It's the same for me: in WM6 at least it doesn't work, at least with the spanish code 040a.
Moreover, this registry keys reference to another ones:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Ime File"="compime.dll"
"Layout Text"="COMP IME"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\00000409]
"PS2_AT"="kbdus.dll"
"Layout Text"="US"
"Layout File"="kbdus.dll"
that probably need also to be changed, but I think I would also need the .dll files for the spanish language.
changed to german(switzerland)version 0807. Reg still saved. Keyboard does not get it. will try 0407 now.
Haha!!!! Changed to 0407 and tataaaaa!!!! it works just fine. I tried each and every one of the keys. Apparently there is no special German(Switzerland) setup. I can tell because there is also the ß(its a kind of double S) -key on there. We would not use that in Switzerland. THX rebelyell
Give more details please
BenOggo said:
Haha!!!! Changed to 0407 and tataaaaa!!!! it works just fine. I tried each and every one of the keys. Apparently there is no special German(Switzerland) setup. I can tell because there is also the ß(its a kind of double S) -key on there. We would not use that in Switzerland. THX rebelyell
Click to expand...
Click to collapse
Have you got WM6 rom?
Which reg keys have you changed?
Which keyboard has been changed (sip or physical)?
Yes I have tested it with 0407 and it seems that the keyboard is correct with the germany language... but no way with the spanish 040A key.
Nobody with a solution nor ideas????
SOLVED
rodalfa said:
Yes I have tested it with 0407 and it seems that the keyboard is correct with the germany language... but no way with the spanish 040A key.
Nobody with a solution nor ideas????
Click to expand...
Click to collapse
Finally I got the solution: for any strange reason the spanish with 040A code is not working, but it is with 0C0A code.
The danish code 0406 dont work, i will try the swedish and the some of the other scandinavish codes, here to day.
Did try the Danish, Swedish and Swedish_Finland and none of them did work. So for the moment i am just using the soft keyboard, when i need to write æøå in an message.
You have tried? Because i think that Locale only change keyboard distribution (QWERTY, QWERTZ, AZERTY). Spanish and english have the same distribution.
Yes i did try the reg edit fix but no luck.. i think it is becouse the right files aint in the crossbow leak... I am just thinking if the files from wm5 will work in the wm6 build... My guess is that it wont... i did try the swedish hard keyboard fix cab there is on the ftp and that did break the keyboard totaly.. There was´t any respond from it after so har to reinstall...
i also tried it ab out 10 times till it worked. the string always disappeared after a softreset, and even bevore that the keyboard didn't change.
than i gave up and didn't try it anymore and it worked sometime later. don't know why and why it didn't disappear the last time... i just hope it will work after another reset (or chaning battery).
rodalfa said:
Finally I got the solution: for any strange reason the spanish with 040A code is not working, but it is with 0C0A code.
Click to expand...
Click to collapse
For me It doesn't work after sof reset.
wm6 double language
I made some patch for russian peole.
Have a look)
1) Default keboard has rus/eng layouts. And also we can tap in two lang.
http://4pda.ru/forum/uploads/img-26633-display_1.jpg
2) World comlection from standart dict also support two lang (rus/eng)
3) We can quick search contacts in two lang by press down key (rus/eng)
4) We have two lang working tabs in contacts
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5) Also, i changed buttons in dial pad (rus/eng)
6) I found how to change defaul keybord skin) and made it by myself
http://4pda.ru/forum/uploads/img-26753-display_5.jpg
All is possible
Is it possible to share with us how you did it?
I would like to do so for Greek Language
@Tna
ok, ill write some manual for that
mun_rus said:
@Tna
ok, ill write some manual for that
Click to expand...
Click to collapse
Thanks!
I have succeded to change keyboard layout from US to UK, but now, there's no predictible text input anymore.
Any idea?
Related
Since I had severe problems getting the swedish characters to work after upgrading to WM6 (Pandora 3.2) I thought I'd provide the other swedes here with my sollution.
For the hardware keyboard:
Open a registry editor and locate
HKCU >> ControlPanel >> Keybd
Change the string from 0409 to 0414 and save.
Turn the wizard off by using the power button. Do no soft reset. If you soft reset sometimes the registry is not saved.
Turn the wizard on. You should now have swedish characters.
The value 0409 is for english. I could not get it to work by replacing it with 041d which is the code for Swedish according to Microsoft (all country codes can be found here http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx )
However, one user in the forum used 0414 which is really Norwegian_Bokmal but they also use å, ä and ö. Tested this and it worked.
Some threads tell you to also change the value in two other places:
HKCU >> keyboard layout >> Preload >> 1 >> Default and
HKCU >> keyboard layout >> Preload >> Default
Do not change these settings. It will do nothing except disabling the auto complete function. I also encountered problems starting the wizard after changing these settings.
To get swedish characters on the onscreen keyboard I installed SkandinaviskTastatur5 which can be found here:
http://forum.xda-developers.com/showpost.php?p=1150091&postcount=97
Hope this helps!
thanks.
Good job.
Just helped a friend.
Daniel
I dont understand how to change the langue on the harwere keyboard, plz help me!! // Michael
Tackar! Usally I use Registry Wizard for this, but with this method I don't have to install any 3:d-part programs
Perfekt!
Tack för hjälpen
Didnt work for me.
I tryed this at my Kaister with 6.1 but it didnt work. did try both 0414 and 041d.
For the hardware keyboard the only way I've ever got it to work is by using a proggie called "skandinavisk tastatur". Comes as a .cab- just install and it lets you choose which nordic keyboard layout to use. It's a bit tricky to track down (I think it is freeware though), but nothing half an hour on google will fix
Carrotcake said:
For the hardware keyboard the only way I've ever got it to work is by using a proggie called "skandinavisk tastatur". Comes as a .cab- just install and it lets you choose which nordic keyboard layout to use. It's a bit tricky to track down (I think it is freeware though), but nothing half an hour on google will fix
Click to expand...
Click to collapse
About 30sec google, here you go: http://www.idedata.no/programmer/progredirector.asp?ID=581&type=mips
But I like the sulotion in the first post more
Thank you so much for the information, I've been looking for a way to get Scandic letters working for quite some time now. Finally I can use my Wizard normally.
I can also confirm that this works for Finnish. As stated in the first post, just navigate to HKCU - ControlPanel - Keybd and change "Locale" to "0414", hard restart via the power button and you're done.
HEJ
JaX3RiR said:
Thank you so much for the information, I've been looking for a way to get Scandic letters working for quite some time now. Finally I can use my Wizard normally.
I can also confirm that this works for Finnish. As stated in the first post, just navigate to HKCU - ControlPanel - Keybd and change "Locale" to "0414", hard restart via the power button and you're done.
Click to expand...
Click to collapse
in fact, i suggest you to use the EZIMPUT from cracing, there is swedish as well.
i have a wizard with swedish characters on keyboard, if you want i can take a shot and send via email to you, so you can easily figure how to "design2 the characters on your keyboards....
Jag kan inte pråta på svensk, med jag vill hjelp (hope is the correct way to write in swedish)
Vi ses
Hi all,
I've still tried to change the hw keyboard layout to german with the following tools...
- German Input (Crossbow).cab
- German Input for WM6 by ZakMcRofl.cab
- German Transcriber by ZakMcRofl.cab
- Hades German Language Pack for WM5 v1.3.cab
But nevertheless the Hardwarekeyboard never changed.
Does anybody have a suiteable idea how to change the settings in WM6 to use a german Hardwarekeyboard?
Kind Regards
Seppl
Hi Seppl
Install Registry Wizard and select Keyboard Language "German".
I selected "Norwegian" on my Qtek9100, and it works fine.
Best regards
Rosseha
I know what you need to do, but I haven't done it in a while, so I can just explain it to you. You need to go into the registry and find the key for the keyboard (if it is currently english, it will say 0409). Once you have found that, change it to the language for the keyboard you want.
For German layout (QWERTZ):
Code:
HKCU\ControlPanel\Keybd\Locale = 0409 (String) (ORIGINAL)
Change to HKCU\ControlPanel\Keybd\Locale = 0407 (String)
-Nstefanelli-
okay...
in HKCU\ControlPanel\Keybd\
are only the values
DefaultKeyLock 1
EnableIndicatior 1
InitialDelay 375
Muteswitch 1
RepeatRate 8
ShowWarningMsg 1
There is no string value Locale.
By the way, where can i get "Registry Wizard"
Seppl82 said:
okay...
in HKCU\ControlPanel\Keybd\
are only the values
DefaultKeyLock 1
EnableIndicatior 1
InitialDelay 375
Muteswitch 1
RepeatRate 8
ShowWarningMsg 1
There is no string value Locale.
By the way, where can i get "Registry Wizard"
Click to expand...
Click to collapse
I have an Italian hardware keyboard and an English OS. I use AEKMap to remap the hardware keys. It work great! You can find the software at http://ae.inc.ru/aekmap.php with a lot of free remap files from users.
Remap files are here http://ae.inc.ru/aekmaplayout.php
Seppl82 said:
okay...
in HKCU\ControlPanel\Keybd\
are only the values
DefaultKeyLock 1
EnableIndicatior 1
InitialDelay 375
Muteswitch 1
RepeatRate 8
ShowWarningMsg 1
There is no string value Locale.
By the way, where can i get "Registry Wizard"
Click to expand...
Click to collapse
Hi,
you have to create the key / value..
best regards
I've already created a new string.
Are you sure that it is a string value?
The Problem is I created it, rebooted (checked if the key is still there) but there is no change. When i press "Y" a "Z" appears ;(
XDA RegistryWizard
...it's a perfect solution!
it's simple, useful for tweaking registry and free
Tommaso
Where can i get the "RegistryWizard"
here u r!
RegistryWiz + Framework
hi!
tommy
Registry wizard
here you find it
ftp://ftp.xda-developers.com/Upload/cabs/RegistryWizard_PPC.ARMV4.cab
That will work, I do it all the time!
Bye
Hey AEKMAP is great
I had a Swedish keyboard and made the Swedish file remap.
If any one needs more details will be happy to explain or to make any file for your keybs ;-)
Aldo
nstefanelli said:
I know what you need to do, but I haven't done it in a while, so I can just explain it to you. You need to go into the registry and find the key for the keyboard (if it is currently english, it will say 0409). Once you have found that, change it to the language for the keyboard you want.
Click to expand...
Click to collapse
Hello and thank you for the hint!
It works for me with all the standard keys, like 'Y' and 'Z' and the punctuations. There is one thing left open though: when I need to type a German 'Umlaut' I was used from WM5 to type the letter, let's say 'a' and then the 'Sym' key, and it was creating a 'ä'. Now when I'm doing this, it creates a 'à'.
Hope these characters make it to the posting correctly
Is there any additional hint on this?
FordPrefect said:
Hello and thank you for the hint!
It works for me with all the standard keys, like 'Y' and 'Z' and the punctuations. There is one thing left open though: when I need to type a German 'Umlaut' I was used from WM5 to type the letter, let's say 'a' and then the 'Sym' key, and it was creating a 'ä'. Now when I'm doing this, it creates a 'à'.
Hope these characters make it to the posting correctly
Is there any additional hint on this?
Click to expand...
Click to collapse
in wm6 roms the sym.txt is named sym.0409.txt
so just rename a german sym.txt in sym.0409.txt
or take mine.
just use the hades german language pack and copy the sym.0409.txt to the windows folder.
steph
Thank you! Will try that ...
I have found another approach which I'm going to try.
Beta 2 discussion starts here post#37
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Today:
HTC Home
QuickMenu find it here by nanling
HTC Quick link
Dual SIM switcher
Connectivity:
Active Sync
Bluetooth Explorer
Comm Manager (Touch Dual)
Internet Explorer
Internet Sharing
Peek Pocket
QuickGPS
Setup VoIP
USB HDDrive (wm5torage)
Games:
Bubble Breaker
FreeCell
Reversi
Solitaire
Media:
Audio Manager
HTC Albm
Picture & Video
Voice Recorder
Streaming Media
Voice Speed Dial
Windows Media Player
Office Mobile:
Adobe Reader LE
Excell
Notes
One Note
Power Point
Tasks
Word
Phone:
Call Firewall Find it here by shaileshashar
Group SMS Find it here by shaileshashar
Pim Backup find it here by dotfred
SAPSettings
Sim Manager
SMS Backup
Tools:
Clear Temp
Comm Manager Settings
Device Manager
Action Screen
Java
Pocket RAR
Registry Editor
Screen Capture
Tool Bar Colors
Zip
Other:
Calculator (Touch skin)
Camera
File Explore (extension addon)
Messanger (MSN)
Windows Live
WorldCard Mobile
Network plugin
Network Wizard (not set to auto detect network you must do this your self .. goto start>connections>Network Wizard then go to menu and select auto detect network)
download link: Kaiser Touch I beta2 gullum
you can find some extra stuff on http://gullum.4shared.com
thanks to:
hma4 - for beening a grate friend and my team cook for prophet (can't wait for you to get you'r Kaiser)
jcespi2005 - for his hard work on the kitchen
pof - for all his findings and hard work
tadioz - for the tools that made my first kaiser rom a realety
duttythroy - for his help
claudyfa - for getting me started cooking for prophet
its right - for all his help
meschle - for all his help
Chopin - for all you cool tools
everyone that has tested my prophet roms
Before I install it can you inform us of more details about it? Free Ram? Programs installed? etc. Great work and Thank You!!!
gullum said:
ok this is a beta everything is working except the cube so far
I've downloaded the Kaiser kitchen by JugglerLKR and will use it for the next version and hopefully I can make an even better rom then this there is still some cleaning to be done
anyway here is my first kaiser rom upload
http://rapidshare.com/files/68279562/KaiserTouchBeta1.rar.html
Click to expand...
Click to collapse
Great, many thanks for your contribution... keeping this so funny
Thank you very much gullum! Keep up the good work!!!
Martinjv71 said:
Before I install it can you inform us of more details about it? Free Ram? Programs installed? etc. Great work and Thank You!!!
Click to expand...
Click to collapse
I'll just refer to this thread http://forum.xda-developers.com/showthread.php?t=341799 most of the apps are the same
quickmenu is set as standard menu
storage 133.16 mb total 127.57 free program 101.38 total 70 free
Anyone willing to upload somewhere else other than RS...like megaupload?
Great, I'm really looking forward to trying one of your famous roms ;-)
Keep up the good work!
Hi gullum,
Many thanks for your effort.
I can see in your page http://gullum.4shared.com that Greek language is missing from the suported language images for the touch dual keyboard. Is there any way to create a cab for that too? For everything you may need, many greeks are here.
Or as an alternative, is there any way for us of tweaking of any configuration file and make the touch dual keyboard to support the greek language?
Thanks in advance and i know that you are very busy already!
Another great chief with another rom
would you please add the info on the OS build
Thanks
gullum said:
ok this is a beta everything is working except the cube so far
I've downloaded the Kaiser kitchen by JugglerLKR and will use it for the next version and hopefully I can make an even better rom then this there is still some cleaning to be done
anyway here is my first kaiser rom upload
http://rapidshare.com/files/68279562/KaiserTouchBeta1.rar.html
Click to expand...
Click to collapse
os 5.2.1620(build 18533) I'm porting the xip for 1933 for next upload
I'll just refer to this thread http://forum.xda-developers.com/showthread.php?t=341799 most of the apps are the same
quickmenu is set as standard menu
storage 133.16 mb total 127.57 free program 101.38 total 70 free
Quick question to the Master about "soft" .mui installation.
is it possible to change wm6 interface language by just adding a language pack (the whole *.04xx.mui files) to \windows and edit HKCU\MUI and HKLM\MUI to the corresponding 04xx language code ?
draxredd said:
Quick question to the Master about "soft" .mui installation.
is it possible to change wm6 interface language by just adding a language pack (the whole *.04xx.mui files) to \windows and edit HKCU\MUI and HKLM\MUI to the corresponding 04xx language code ?
Click to expand...
Click to collapse
no sorry there are some other files that need to be canged.
because changing the mui will make the os look in folder that are not there
startup folder is called something else in french same with all other standard folders
i've only noticed four \windows subfolders with localized names
-Favorites (Favoris)
-Programs (Programmes)
-Startup (Démarrage)
-Start menu (Menu démarrer)
How retarded is this, should'nt wm6 use $path variables for this stuff ?
Excellent stuff.... thanks
Yippeee, bring it on! Great to have another great cook join the Kaiser forum! Thanks Gullum, will try out this beta.
Nice Gullum
xt9!
sup Gullum...im feeling this rom. fast...but in all fairness i can't tell the difrence between this...duty and helmi's rom....i guess because the kaiser is such an excelent device. i guess it comes down to the reliablity of a rom and the flavor. im really digging your customizing style though...great job. One thing though....that blasted xt9. i tried using the zipped files on dutty's post...
http://forum.xda-developers.com/showthread.php?t=340024
but its not working. i rebooted and its still there. i tired turning it off under keyboard options but its still there. any help? i really want to avoid flashing back because of this alone....
Hey Gullum,
great work...can you post your calc skin...
rzanology said:
sup Gullum...im feeling this rom. fast...but in all fairness i can't tell the difrence between this...duty and helmi's rom....i guess because the kaiser is such an excelent device. i guess it comes down to the reliablity of a rom and the flavor. im really digging your customizing style though...great job. One thing though....that blasted xt9. i tried using the zipped files on dutty's post...
http://forum.xda-developers.com/showthread.php?t=340024
but its not working. i rebooted and its still there. i tired turning it off under keyboard options but its still there. any help? i really want to avoid flashing back because of this alone....
Click to expand...
Click to collapse
take a look at this guys....works like a charm...
ProphetUser07 said:
As far as I've been able to find out, this is caused by XT9 being enabled. I've disabled XT9 on my prophet which has successfully re-enabled word completion and also autocomplete when entering names in the To: field on messages. I've done this by changing the following registry entries and powering the device off and back on:
With XT9 Enabled I Had:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Ime File"="\windows\eT9Ime.dll"
"Layout Text"="eT9 IME"
With XT9 Disabled I Now Have:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Ime File"="\windows\compime.dll"
"Layout Text"="COMP IME"
*The last 3 digits of the registry key (ie 409) may vary depending on the language code used.
I found this information on http://myg900.com/index.php?showtopic=199 which gives additional information on how to remove XT9 completely, albeit on a different device. I found just changing the registry entries above though disabled XT9 and makes it simple enough to re-enable at some point in the future. A side effect of disabling XT9 on my device also seems to be that both the 'Touch Keyboard' and 'Touch Keypad' have now become a full 40 key keyboard, albeit with no word completion.
Having looked through the registry I found that the following registry entry controls the font size used when entering new text messages:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox]
"RichEditHostFontSize"="10"
You can change the value to whatever you feel is appropriate. I think 10 is the same size as I had on my previous ROM.
Hope this helps
Click to expand...
Click to collapse
okay now that i got the tx9 madness out the way....i'm setting everything back up...lets see how it goes. so far so good
Hi!
Nobody knows how to get keyboard shortcuts working on WM6?
On WM5 it works ok, after i install sym-patch software. tryed to use same software on WM6 Roms, but not working.
Tested many different roms.
If somebody can help me and others
Thanks wery much!
Hi,
First I installed SkandinaviskTastatur5 and then I changed the registry like this:
1. HKCU >> ControlPanel >> Keybd
create string named Locale and put 4-digit code of your keyboard (my german wizard with WM6.0 WWE ROM uses 0407)
2. HKCU >> keyboard layout >> Preload >> 1 >> Default
change value of last 4 digits to your code (in my case, I changed e0010409 to e0010407)
3. HKCU >> keyboard layout >> Preload >> Default
change value of last 4 digits to your code (in my case, I changed e0010409 to e0010407)
4. exit registry editor and continue to operate your device for few minutes. After that, softreset. Caution: sometimes your wizard "forgets" to write modifications to your registry, so repeat this procedure 'till it works.
I wanted swedish keyboard so I change to 1414 for Norwegian because the Swedish code didn't work.
I now have a swedish keabord layout and it works with my Qtek 9100 keyboard too. Worked with all the WM6 roms I have tried.
Good Luck !
Thanks, ill give it a try
What do you think is the best or ok WM6 ROM? i have tryed maybe 10 different ROMs, and still looking
Qtek 9100 is too slow for WM6 and i need to use Over clocking.
Ill let you know if this works for me!
Thanks!
So, I'm curious. Did it work out ?
I really liked XDA Mobile 6 release 3 but it made my qtek a bit slow and I didn't want to use over clocking because it's a workpda
I then tried some other roms but now I'm back with the original rom for my qtek. Haven't found one that I really like yet.
But I love the HTC home plugin so I have that installed now with my WM5 and it works great
Still looking too I guess...
Hi!
jep, it allmoust worked. had to use norwagian keyboard code. no swedish or finnish worked.
I have xda mobile 6 version and it works like a charn
no trying to find keyboard change to universal qtek 9000.
haven't found it yet!
do you have an idea where to look? tried everything allmoust.
thanks for this
Hi there..
I know I can install a single language with a t9 cab file. But what I need is installing many languages in a single go. They are used on the Imate SPL.
I have quite a few Imate SPL phones to sell and installing single languages takes a lot of my time, so a single big file would save me trouble. I could install all languages seperately with Active Sync, but then I need something that can adjust the registry so that they are all available from the t9 menu, now only the last one installed shows.
I use all the languages from this page, from Czech to Turkish (no Chinese)
http://melgurth.ovh.org/index.php?page=downloads
Only for Portuguese I use another one, because the one from the page doesn't work. I use this one:
http://rapidshare.com/files/71913751/t9_Eng-Portug.rar
Of course I don't want to be a free rider, so the first to make me a fully working multi language .cab file or a proper registry edit thingy gets $100!
Maybe it already exists, well that is also worth it to me, let me know please.
adriaanb said:
Hi there..
I know I can install a single language with a t9 cab file. But what I need is installing many languages in a single go. They are used on the Imate SPL.
I have quite a few Imate SPL phones to sell and installing single languages takes a lot of my time, so a single big file would save me trouble. I could install all languages seperately with Active Sync, but then I need something that can adjust the registry so that they are all available from the t9 menu, now only the last one installed shows.
I use all the languages from this page, from Czech to Turkish (no Chinese)
http://melgurth.ovh.org/index.php?page=downloads
Only for Portuguese I use another one, because the one from the page doesn't work. I use this one:
http://rapidshare.com/files/71913751/t9_Eng-Portug.rar
Of course I don't want to be a free rider, so the first to make me a fully working multi language .cab file or a proper registry edit thingy gets $100!
Maybe it already exists, well that is also worth it to me, let me know please.
Click to expand...
Click to collapse
i dont think this is a problem
or you may chang your ROM,this is a better way
add input changer in your settings, cpl.xml control it
Find what`s difference in the cab:
reg:
[HKEY_LOCAL_MACHINE\T9 Input Method\IME]
"0400"="t9AW.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method]
"Current IME"="0400"
"Current LDB"="0405"
"Default Alpha LDB"="0405"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Ime File"="T9Ime.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\LDBs]
"0405"="T9CzechLdb.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\LDBS]
"0405"="t9 Czech"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\Languages]
"Available"="0405"
you can chang it to:
[HKEY_LOCAL_MACHINE\T9 Input Method\IME]
"0400"="t9AW.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\0405]
"Current IME"="0400"
"Current LDB"="0405"
"Default Alpha LDB"="0405"
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Ime File"="T9Ime.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\LDBs\0405]
"0405"="T9CzechLdb.dll"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\LDBS\0405]
"0405"="t9 Czech"
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\Languages\0405]
"Available"="0405"
and other reg
.....
.....
FILES:
t9 czech.cab:
T9AW.dll 47kb
T9AWEngine.dll 154KB
T9IME.dll 82kb
T9ImeRes.dll 10kb
T9imePrefs.dll 29kb
T9CzechLdb.dll 122kb
T9ImeRes.Dll.0405.mui 11kb
t9 Danish.cab:
T9AW.dll 47kb
T9AWEngine.dll 154KB
T9IME.dll 82kb
T9ImeRes.dll 10kb
T9imePrefs.dll 29kb
T9DanishLdb.dll
T9Imeres.Dll.0406.mui
t9 English.cab
t9 Portuguese.cab
.....
.....
you see,just the two files are different
or you can send me a ROM you use,i will try..
Easy
lovebabyjing said:
i dont think this is a problem
Click to expand...
Click to collapse
Thats true!
If he really give 100 US$ to that person who did that 30min work that would be a easy earned money! ;o)
If you want to - I can do it for you!