Related
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- Volume is too low during conversations, it has to be fairly quiet around to be able to hear the other person (even with the volume turned way up)
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
- Answers calls in pocket. You go for the phone, but the touch screen is on and you answer or hang up (in my case apparently almost always hangs up) while the phone is still in your pocket. Also VERY annoying.
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
- Then there's the slowdowns.. not really a fault, but like windows 95 it can become very slow or unresponsive for a short period for unknown reasons. A phone has to work when you need it... not delay you for 30 secs while it thinks things over. I've had to reset my phone a couple of times this month. (No I didn't run 10 apps at the same time while trying to use TF3D to look at pictures)
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
These problems are the reasons that I'm considering selling my phone to some other unfortunate person. They are BASIC functions that just have to work! I love the HTC touch pro for it's PDA functionality and my Tom Tom maps etc. but I'm really starting to hate it for these basic functionalities that work very poorly!
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
ssndk said:
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- Volume is too low during conversations, it has to be fairly quiet around to be able to hear the other person (even with the volume turned way up)
Click to expand...
Click to collapse
Tweaks enough around
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
Click to expand...
Click to collapse
I don't have that problem?
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
Click to expand...
Click to collapse
never had that either
- Answers calls in pocket. You go for the phone, but the touch screen is on and you answer or hang up (in my case apparently almost always hangs up) while the phone is still in your pocket. Also VERY annoying.
Click to expand...
Click to collapse
try this solution
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
Click to expand...
Click to collapse
Did you try a different alarm already?
- Then there's the slowdowns.. not really a fault, but like windows 95 it can become very slow or unresponsive for a short period for unknown reasons. A phone has to work when you need it... not delay you for 30 secs while it thinks things over. I've had to reset my phone a couple of times this month. (No I didn't run 10 apps at the same time while trying to use TF3D to look at pictures)
Click to expand...
Click to collapse
Don't have that problem
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
Click to expand...
Click to collapse
Now you mention it, yes, that is annoying... Would love to see a tweak for that as well!!
These problems are the reasons that I'm considering selling my phone to some other unfortunate person. They are BASIC functions that just has to work! I love the HTC touch pro for it's PDA functionality and my Tom Tom maps etc. but I'm really starting to hate it for these basic functionalities that work very poorly!
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
Click to expand...
Click to collapse
Have you considerd a custom Rom yet? I am currently running the DCS Rom, and don't have the problems you mention above. It made my TP much more responsive!
A lot of these problems though, are mentioned throughout this forum, and can be solved. Either by ROM updating, or tweaks... What Rom are you running?
I understand completely. I feel differently though. My TP is the best phone ever. The issues I have were seen on my previous devices (HTC devices for the US). The faster processor, increased storage, and TF3D make me happy. Don't get me wrong, I have cussed at this phone, missed inportant business calls, and missed a flight thanks to the alarm. I soft reset 1 - 5 times a day to proactively minimize these issues. But overall, the TP is a huge improvement over my Wing. So long as my new devices are improvements to the one before, I am happy. I can't live with a standard cell phone, and love my Raphael.
joeltje said:
I don't have that problem?
Click to expand...
Click to collapse
Try calling your phone from a land line phone.. how long does it take before your cell actually start ringing?
joeltje said:
Did you try a different alarm already?
Click to expand...
Click to collapse
Yes, but it happens so rarely I can't say if its the sound. Besides, it's the rooster sound that came with phone. No matter what it should never happen. It happened on my TYTN II too.. So I guess it's probably a windows thing.
joeltje said:
Have you considerd a custom Rom yet? I am currently running the DCS Rom, and don't have the problems you mention above. It made my TP much more responsive!
Click to expand...
Click to collapse
Hmm.. I might try that.. but I often see people start having entirely different problems with their phone then (lock ups and strange behaviour). If there is a stable ROM that fixes these issues and doesn't break down hard once every week. I'm all for it!
I'm running the standard ROM that came with the phone. Ver.: 1.90.403.6 DAN (Danish) ROM date 08/23/08, Radio: 1.02.25.19, Protocol: 52.33.25.17U
If I call my cellnr. from the home phone, it starts ringning as quickly as all my other mobile phones... So no, I really don't have that problem, thoughj I did just see another topic from somebody with exactly you problem: http://forum.xda-developers.com/showthread.php?t=432415
You might want to follow that.
On the alarm, I have 2 kids, so I don't use an electrical alarm Sorry...
The different ROM may be something you can test at least. It fixed a lot of annoyances for me anyway. Look in the Wiki for different Custom Roms, there are a couple out there, and for me, DCS worked best. You can always go back to original, should you not like the ROM. I'm running DCS now for three days, no resets, and it is still fast....
ssndk said:
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
Click to expand...
Click to collapse
The issue above really annoying. Normally that will cause my TP to go mute and can't hear each other. Have to soft reset. This issue is discuss in another thread here. Since I'm overseas for at the moment, can't go complain to my vendor.
ssndk said:
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
Click to expand...
Click to collapse
Using the registry hack for the touch diamond I'm now using the "lock on backlight turned off" fix.. it works, and my phone locks when I press the screen off button. Way less annoying than waiting 4 seconds for it to lock.
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
Nice, 1 Question though; What happens if you make a call? The display goes of as well then, will the keyboard then lock as well? Cause that's not handy, to say the least
joeltje said:
Nice, 1 Question though; What happens if you make a call? The display goes of as well then, will the keyboard then lock as well? Cause that's not handy, to say the least
Click to expand...
Click to collapse
The touch screen locks, but the keyboard (Off-hook etc.) button doesn't..
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
joeltje said:
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
Click to expand...
Click to collapse
you can extract the stylus but the you have to juggle around with it OR you can press the standby button on top to unlock it. It's a pain I know but the problem is that it is a touch screen so pressing a button to unlock is less worse than without it.
So functionality actually remains as it is now... That's good, I'll give it a try!
joeltje said:
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
Click to expand...
Click to collapse
It unlocks when the stylus is extracted..
ssndk said:
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
Click to expand...
Click to collapse
Sounds like you are using a ringtone from your microSD card. This will cause a delay. Your ringtones need to be copies to your device and activated by holding the stylus over your selection & hit set as ringtone.
Hope this helps,
Rgs,
J
ssndk said:
The touch screen locks, but the keyboard (Off-hook etc.) button doesn't..
Click to expand...
Click to collapse
Try SensorLock. It's a great little utility that unfortunately has stopped working for me. Must be something I poked somewhere. lol
As for the alarm, mine works fine... but I do notice the ringing a couple of times on the sending end before the phone starts to ring. I'd sort of passed that off to a network thing, not a phone thing.
The 3 second ringtone delay is a WM issue. Look at the postings for VAlert in the general hacking section. The only known fix is http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
but no one seems to have figured out their registry setting change...
Quote:
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
TRY G-Alarm. It works well for me.
Klaxon (sp?) alarm looked cool and would have also been practical, but it would crash - totally unreliable.
[email protected] said:
Sounds like you are using a ringtone from your microSD card. This will cause a delay. Your ringtones need to be copies to your device and activated by holding the stylus over your selection & hit set as ringtone.
Hope this helps,
Rgs,
J
Click to expand...
Click to collapse
No, in my TPro the delay is exactly the same (oviously using the same mp3 file in memory card or in the device)..i've reduced delay sound installing Diamond tweaks and setting "without delay" in ring tone..then i've erased diamong tweaks because use too much battery now i have only 1 ring with light (and identified call incoming on the screen) and without sound, and BEFORE the second ring my device correctly sound
bugsykoosh said:
The 3 second ringtone delay is a WM issue. Look at the postings for VAlert in the general hacking section. The only known fix is http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
but no one seems to have figured out their registry setting change...
Click to expand...
Click to collapse
If your referring to this one,
108-Allow users to disable the 3 seconds delay between rings in devices with Windows Mobile Phone Edition
Click to expand...
Click to collapse
see the following thread at PPCGeeks.
If your talking about the fact that the NAV wheel starts flashing 5 seconds before the audio starts playing, then it's not the same scenario.
ssndk said:
Using the registry hack for the touch diamond I'm now using the "lock on backlight turned off" fix.. it works, and my phone locks when I press the screen off button. Way less annoying than waiting 4 seconds for it to lock.
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
Click to expand...
Click to collapse
I have a HTC TouchPro and had the same issue of not wanting to press the long press end key for 5 seconds to lock the phone. I tried the code you gave and unfortunately the phone still does not lock when I push short press the power button to turn off the back light and put th phone in sleep mode. I really want this to work since when I am driving, I think when I go through good and bad coverage areas, the phone will automaticallly wake up about 3 times each way, so if it is not locked, I can accidentally call people while driving.
NOTE: This is a list of bugs for STOCK (NON-MODDED) ICS 4.0.3 & 4.0.4 (LC4, LD2, and LE2) (Most bugs from the initial LC4 leak fixed after the two major version leak updates) from DesignGears.
If you have flashed to ANY OTHER CUSTOM ICS 4.0 ROM, PLEASE WRITE IN THE DEVELOPERS' / ROM thread.
1 - 03/26/2012: When selecting "Contacts to Display" and selecting CUSTOMIZE LIST > Selecting ONLY Google Contacts (EXCLUDE G+).
Then you start typing someone's name, it returns contacts in SIM card and on Google contacts.
2 - 03/26/2012: Autocorrect on the included "Android Keyboard" doesn't work by pressing spacebar.....like it had been in previous 2.3.6. Even when changing setting to VERY AGGRESSIVE. FIXED IN UCLD2 LEAK
3 - 03/26/2012 [CONFIRMED] When deleting a message thread, the phone will freeze and turn into a blank screen (except notification bar) then the messaging app will close. FIXED IN UCLD2 LEAK
4 - 03/26/2012: [CONFIRMED] When using the "PHONE" icon to bring up dialer, contacts tab is no longer associated in it.
5 - 03/27/2012: 50/50 Users report more sensitivity on the touch screen, some report lack of sensitivity of touch.
6 - 03/27/2012: HOW TO take screen shot: Press AND HOLD ... VOL DOWN + POWER BUTTON for at LEAST 1-2 SECONDS. You will then be prompted to view the screenshot in notification bar / indicator.
METHOD #2 of taking screenshots: Press and HOLD Power button + HOME key.
7 - 03/29/2012: Some users report when tapping "RESTART" or "SHUTDOWN" on STOCK Power-button option, the phone will freeze. Either you have it or you don't. FIXED IN UCLD2 LEAK
7 - 04/02/2012: Users report echoing or unable to hear other party on an INCOMING call. This is a "hit or miss" bug.
8 - 04/02/2012: [CONFIRMED]Bluetooth stack in the new kernel has resolved a LOT of vehicle-to-android phone issue (static, drops, functions, etc.).
10 - 04/04/2012: [CONFIRMED BIG ISSUE] When creating a new contact in phone and setting it to GOOGLE CONTACTs; forcing a sync or auto-sync option will NOT push the contact to google servers for backup purposes. However, deleting or creating a contact while logged in on a full web browser will push it back to the phone via sync. FIXED IN UCLD2 LEAK
11 - 04/09/2012: [CONFIRMED] There are known issues with stock email app. Syncing unread/read e-mails will not push back to exchange server email client. Also emails me not completely send and stays "stuck" in outgoing box.
FIX (Thanks dixit):
This google thread shows the official issue and show that it was fixed officially in 4.0.4.
https://code.google.com/p/android/is...etail?id=23534
If you scroll down to post 51 you will see there is a link where someone put the two 4.0.4 APKs from a Spring Nexus S 4G which fixes this issue as explained above. So just go to that link, download the two Email/Exchange APKs, put them in System/App, correct permissions, remove your two Samsung Native Email APKs, and that will fix the issue of emails being stuck in the outbox.
Here is the direct link to those two APKs off Post 51
http://files.devphone.org/404mail/
11 - 04/15/2012: [CONFIRMED] When adjusting ringtone level in SETTINGS > SOUNDS, the ringtone level will not lower or raise; it stays at one level.
FIX: Adjust via volume rocker while in any other system screen (Home, MMS, etc) BUT NOT IN-APP. *Thanks petrochemicals!*
Here's what I found and posted in another thread...
So far so good except a few things:
1) I hate the fact that "contacts" are no longer visible in the dialer. Now I need another icon that I rarely use. The only option appears to hit menu and select contacts from there.
2) The "power off" and "restart" options in the extended power menu (hold power button down) seem to lock up and freeze whenever I try to use one of these thus requiring a battery pull. Anyone else experiencing this?
3) Can't use built in hotspot tethering anymore. This is something that I use with my tablet often. Any solutions other than a 3rd party app? If not, what app is everyone using for hotspot tethering?
4) Why in the world don't the signal bars turn green once fully connected? It's driving me crazy because normally that means its not connected to your Google account. This is the first time I've seen this (of MANY different Android phones). - This appears to be an ATT thing as other carriers and phones change the signal bars color when its connected to your google account (as it always should be).
Grey bars, works for for me; turning green = same color as battery = confusion to some it is acting as a double icon of ur battery? lol
I don't get a freeze in the menu.... I'm assuming you're talking about the built-in menu not a modded one? I just use the one that came with the ICS.
Hotspot tethering, you'll have to wait for a dev to mod that unless you are wanting an app for it.
I can tell you that I got my portable hotspot to work. It gave me numerous error messages though when I first went to set it up and the screen freezes when I turn it on. I went back to home and back to the hotspot settings and the toggle remained on. I changed the default password to all 9s bc I was getting an invalid password error. After that, I connected my old iPhone to the Skyrocket wi-fi.
I used to use Barnicle Wi-fi tether but it doesn't work now. Is there a difference between the stock portable wi-fi hotspot program on the phone and Barnicle? Im just curious if Barnicle masked the fact that the user was tethering.
Sent from my SAMSUNG-SGH-I727 using XDA
Yes, I'm referring to the built in power menu. I fixed permissions in CWM and still no go. Any ideas???
I find the keyboard to be a bit slow on the responsive side. Anyone else running into that or am I just trying to type too fast?
Perform a Factory data / reset?
I find the new keyboard fairly responsive vs the old one; I just thought i typed too fast for the old one lol. This one actually keeps up and Swype keyboard tapping works more fluent as well.
good job guys, keep up the troubleshooting so hopefully some devs will cook up a nice rom
fongz27 said:
Perform a Factory data / reset?
I find the new keyboard fairly responsive vs the old one; I just thought i typed too fast for the old one lol. This one actually keeps up and Swype keyboard tapping works more fluent as well.
Click to expand...
Click to collapse
I'll give that a spin. I did that once already to fix my home button problem, so I'll try and do another. But yea I use to use the ICS keyboard from the market on GB, and that was quick enough for me.
stuff I notice so far
I did notice the contact tab missing from dialer. The menu selected one doesn't allow right and left swipe for call/text. In the contacts app, the swipe works ok.
the only real problem for me, thus far, is when deleting SMS threads; messaging force closes.
Anyone else have that?
BTW thanks for starting this thread, wasn't sure where to post bugs - I think this may be usefull to keep them all in one spot.
Getting some odd behavior from Rom Mngr
Aside from other errors I got, when I ask ROM Mngr. to perform a task, I get a bunch of errors like "Messaging has failed," "Internet has failed," "com.google.xx" has failed. But then it goes and performs the request.
However! Whereas on 2.3.6 UCLA3, when requesting a backup via ROM Mngr., it would go straight to the backup whereas now, it goes into CWM and I still have to select Backup from the option there.
Deleting threads freezes my messaging also.
Sent from my SAMSUNG-SGH-I727 using XDA
Noticed a new one.
Not getting pictures with messages now, too.
Nvm. Damn - I hate bug posts. They come, they go.
The only thing I've noticed so far is I don't seem to get LTE in my house anymore. Boo...
I'm having issues with audio files. I can't use either Google Play Music, Samsung Music Player or Doubletwist to play audio. It creates duplicates which I believe corrupt the file itself.
Sent from my SAMSUNG-SGH-I727 using XDA
jayrod88 said:
2) The "power off" and "restart" options in the extended power menu (hold power button down) seem to lock up and freeze whenever I try to use one of these thus requiring a battery pull. Anyone else experiencing this?
Click to expand...
Click to collapse
I get it too, but there is no need for a battery pull if it freezes during a restart.
Press and hold the power button and the phone will restart after a few seconds.
It's a leak, not an official release, so I fully expected bugs.
Face unlock crashes a lot for me.
It fails o power on the camera and then the keypad doesn't respond for PIN input.
Requires a reboot.
rjohnstone said:
I get it too, but there is no need for a battery pull if it freezes during a restart.
Press and hold the power button and the phone will restart after a few seconds.
It's a leak, not an official release, so I fully expected bugs.
Face unlock crashes a lot for me.
It fails o power on the camera and then the keypad doesn't respond for PIN input.
Requires a reboot.
Click to expand...
Click to collapse
Did you do a complete ext4 wipe / format prior to ODIN ONE CLICK ?
Run factory data reset, then fix permissions and then reboot. Face unlock works perfect and pin input works.
fongz27 said:
Did you do a complete ext4 wipe / format prior to ODIN ONE CLICK ?
Run factory data reset, then fix permissions and then reboot. Face unlock works perfect and pin input works.
Click to expand...
Click to collapse
Yep.
Face unlock does work... just not all the time.
have you done "improve facial recognition " if so how many additional pictures did you take?
Facial unlock is perfect for me. No problems whatsoever.
Sent from my SAMSUNG-SGH-I727 using XDA
Q&A for [Rom][3.4 Kernel][4.4.4] CarbonRom [06th October]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
contacts on the sim
bug: contacts on the SIM card in any way it is impossible to get on the phone; thought in the filter can open contacts, but there is no contact importer also does not work
Mishka36 said:
bug: contacts on the SIM card in any way it is impossible to get on the phone; thought in the filter can open contacts, but there is no contact importer also does not work
Click to expand...
Click to collapse
Open contacts app, click menu button, select import -> import from sim. Problem solved = no bug
9959
Firmware is just super,so many settings, I have not seen no where.
Thank you for your work
Thank you for a very good firmware!!! Correct Russian language in incoming notifications.
Is it possible to turn off all notifications in the lock screen? I've looked everywhere and also searched the internet but I can't find a solution.
AgentSmith said:
Is it possible to turn off all notifications in the lock screen? I've looked everywhere and also searched the internet but I can't find a solution.
Click to expand...
Click to collapse
Go Into Settings -> Carbon Fibers -> Lockscreen. Swipe to left to Notification and diablo Lockscreen-Notification
Thanks!! And wow, I would've never found those settings myself. There seems to be no interface feature that indicates the existence of those screens.
/Problem\
I've flashed your ROM , it's awesome , thanx .
When I connected to WiFi first time it was successful and had no problem , it was yesterday .
then today when I back home WiFi couldn't find the Router anymore , neither another router ,
and I can't now use my WiFi , even if there are Wireless networks , My device doesn't recognize them.
What should I do ??? Please Help
Hi dev, I'm newbie using this niz cm ROM. I feel there's quite smooth almost operating every apps, but actually i hv tried camera features in more setting menu, when i try to use denoise by thick that option & try take some pictures but it gv effect camera suddenly force close & appear notification error. is there anyone facing same problem? Is there any solution for these? I'm curious about this option too, is it made significant result quality pictures..?
Thanks for help to gv this great work being perfectly
Best Regards,
HdZ
unlock problem
Hello, I do not know very well English, so I use a translator (sorry for the machine text).
I installed your rom on your phone. When installing the first did full wipe, then tried to format all partitions on the phone (after recovery).
I have the following problem: the phone does not always want to wake up at the touch of a button power.
Here are my observations:
1. If the phone is not used for a long time (more than five minutes), the first pressing of no reaction (the screen is turned off, the backlight is too soft keys do not light up), if you wait a few seconds (3-5) and press the power once again light up the soft keys then after 1-2 seconds the screen.
2. If in the settings to set Wake on volume key (Settings - Carbon fibers - Buttons - Volume button wake), after clicking on the awakening takes place in 100% of cases quickly and correctly (but I was not very happy, because I often favorite player and I do not want to change the volume for each turns on the screen).
3. If you press too much power to the phone may reboot.
4. If a player is running (ie, the phone is not in deep sleep), then unlock more often obtained from the first time (but sometimes not).
5. If you increase the minimum frequency (Settings - Performance - Minimum speed) to 384 or 432 Mhz waking works best (for a long time this setting is not used, because I have no desire to spend the battery for nothing, but in the latter could be wrong, the voltage table cpu versus frequency could not find).
6. If the phone is standing on the charge, then there is always unlock properly.
Tried to look at logcat during the "unfortunate spill," saw nothing suspicious.
Kernel Version: 3.4.104-g0b41012 gigi @ android # 2
Carbon version: CARBON-KK-UNOFFICIAL-KERNEL-3.4-20141031-0840
Build date: Fri Oct 31 08:41:32 CET 2014
Build version: carbon_pyramid-userdebug-4.4.4 KTU84Q b494d86a82 test-keys
Tell me, please, where you can read what other information you need to provide, and whether bugtracker for this?
Thanks in advance.
In the 1031 build Chrome starts in floating mode every time. Is there a way to disable this? All other apps behave as they should.
nfs_daemon said:
Hello, I do not know very well English, so I use a translator (sorry for the machine text).
I installed your rom on your phone. When installing the first did full wipe, then tried to format all partitions on the phone (after recovery).
I have the following problem: the phone does not always want to wake up at the touch of a button power.
Here are my observations:
1. If the phone is not used for a long time (more than five minutes), the first pressing of no reaction (the screen is turned off, the backlight is too soft keys do not light up), if you wait a few seconds (3-5) and press the power once again light up the soft keys then after 1-2 seconds the screen.
2. If in the settings to set Wake on volume key (Settings - Carbon fibers - Buttons - Volume button wake), after clicking on the awakening takes place in 100% of cases quickly and correctly (but I was not very happy, because I often favorite player and I do not want to change the volume for each turns on the screen).
3. If you press too much power to the phone may reboot.
4. If a player is running (ie, the phone is not in deep sleep), then unlock more often obtained from the first time (but sometimes not).
5. If you increase the minimum frequency (Settings - Performance - Minimum speed) to 384 or 432 Mhz waking works best (for a long time this setting is not used, because I have no desire to spend the battery for nothing, but in the latter could be wrong, the voltage table cpu versus frequency could not find).
6. If the phone is standing on the charge, then there is always unlock properly.
Tried to look at logcat during the "unfortunate spill," saw nothing suspicious.
Kernel Version: 3.4.104-g0b41012 gigi @ android # 2
Carbon version: CARBON-KK-UNOFFICIAL-KERNEL-3.4-20141031-0840
Build date: Fri Oct 31 08:41:32 CET 2014
Build version: carbon_pyramid-userdebug-4.4.4 KTU84Q b494d86a82 test-keys
Tell me, please, where you can read what other information you need to provide, and whether bugtracker for this?
Thanks in advance.
Click to expand...
Click to collapse
Go into settings -> Display and disable "prevent accidental wake-up.
AgentSmith said:
In the 1031 build Chrome starts in floating mode every time. Is there a way to disable this? All other apps behave as they should.
Click to expand...
Click to collapse
That's seems to be in chrome. I read that other phones have that issue too.
Sajito said:
Go into settings -> Display and disable "prevent accidental wake-up.
Click to expand...
Click to collapse
thank you, it seems it helped.
Sajito said:
That's seems to be in chrome. I read that other phones have that issue too.
Click to expand...
Click to collapse
Hmm that's weird. Must have started after a chrome update then. Is there a way to disable the floating mode altogether in the system?
AgentSmith said:
Hmm that's weird. Must have started after a chrome update then. Is there a way to disable the floating mode altogether in the system?
Click to expand...
Click to collapse
Not that I found out. You can blacklist apps from floating mode, but that doesn't seem to work.
thank you very much Sajito..
I using yours ROM from the begin because it's the only one that permit my Sensation to working well for daily use.
thank you so much and i'll follow you for your new experience with lollipop
Bye
Edy
(excuse me for my bad english)
hi guys,
i've got a problem but i don't think that is a problem about ROM.
My PC's don't recognize the device (htc sensation). I try to reinstall old version (31/10) but nothing to do and i also try to disable USB debug and enable again but nothing again.
How can i fix it?
thanks in advance
Edy
Reinstall the drivers,or if still no use u can use an application multimount sd card
BODY MECHANIC
delay at screen on in incoming call
hi guys
i have delay in screen on when my phone is lock and i get a call
how can fix this ?
I'm noticing that during many of my calls, I apparently hit the HOLD button accidentally with my cheek. My proximity sensor seems to be working fine, and the screen does turn off appropriately when I hold the phone against my face. I'm assuming that at certain angles enough light gets through to the sensor to turn the screen on, and I accidentally hit the button in the corner. Anyone else have this issue? Is there any way to circumvent this? Thanks
Unfortunately i can't help but i am getting the same issue
Sent from my SM-G930F using Tapatalk
I tried applying different dialer apps and they only serve to change the dialer/contact screens, but the default calling screen containing the HOLD button remains unchanged. I found that using Skype as the default dialer fixes this issue since it uses its own dialing/calling screens, but obviously it's not practical to just rely on Skype. So the problem still remains unresolved.
As an update, someone on Reddit posted a download link to the Google dialer app here at: http://forum.xda-developers.com/galaxy-s6/themes-apps/app-google-dialer-t3323432
This installs a new dialer, which actually provides a new calling screen as well, fixing the main issue. The default dialer is better in my opinion since it opens up the dial pad immediately while this one doesn't, but this is a good option at this point
gomulkaaa said:
I'm noticing that during many of my calls, I apparently hit the HOLD button accidentally with my cheek. My proximity sensor seems to be working fine, and the screen does turn off appropriately when I hold the phone against my face. I'm assuming that at certain angles enough light gets through to the sensor to turn the screen on, and I accidentally hit the button in the corner. Anyone else have this issue? Is there any way to circumvent this? Thanks
Click to expand...
Click to collapse
even worst than calls is when you press it while watching youtube vids, i wish there was a lock of some sort cuz the music stops paying all the sudden
It's embarrassing when I put my clients on hold and don't realise until they don't respond to me. The cheek hold doesn't result in any audible sound so you can be talking for 20 seconds with the other end on hold. I love the S7 edge but I'm contemplating sending it back. I'll try the Google dialer mentioned above first though
Same issue here. I talk on the phone almost 2 hours a day and this is happening at least 1-2 times in every call! Checked my proximity sensor and it's working as it should.
Any workarounds? Maybe someone can edit the phone.apk and remove this stupid button or disable it? I am against rooting but I will definitely root my phone if there's a fix for this.
Damn, I suffer exactly the same issue! Found this googling for ideas...
Very old thread, but I just wanted to give a suggestion to others with the same issue. I really love the Google Phone dialer app, which actually replaces the calling screen during calls with this app's own screen, so you no longer have the Hold button at such an unfortunate location. If you do choose Google's app, I recommend this specific version: http://www.apkmirror.com/apk/google-inc/google-phone/google-phone-2-05-07_rc4-release/google-phone-2-05-07_rc4-android-apk-download/
The caller-ID function by Google actually works with this version, whereas the other .apk files floating around do not have this function working properly.
I'm having the same issue and I've installed the Google phone, however as soon as I place the call, the existing on-screen options pop up.
The option to disable the default phone app is greyed out in settings, so unsure on how to resolve.
robot1000 said:
I'm having the same issue and I've installed the Google phone, however as soon as I place the call, the existing on-screen options pop up.
The option to disable the default phone app is greyed out in settings, so unsure on how to resolve.
Click to expand...
Click to collapse
Finally searched for the answer to this today, after several accidental holds on work calls.
The solution above with Google Phone APK worked for me. I just went to SETTINGS - APPLICATIONS - DEFAULT APPLICATIONS and then under Calling App near the top, changed it from Contacts to Phone. . For some reason, I cannot open the phone app itself (gives an error message) but calls do use the phone app rather than Samsung stock dialer.
Turn off screen!! Most phones allow you to turn screen off without interrupting the call.
Same issue with a galaxy A5 2016
Can't understand why samsung doesn't fix it
Hello to the XDA Dev Community.
I'd like to start a threat with bugs after the Android Pie update on our devices.
1. Bug:
Camera App forgets the "volume down key" binding. Means, when double pressed in standby mode the cam is not started.
Solution: Sadly this works only temporary - start the cam app and exit or close. After that the above mentioned shortcut / quickstart works for a short time in standby mode.
2. Bug:
This one is still not repaired: when switching to black mode (to lower the battery consumption) one can not see in the apps overview which of the apps are deactivated - the letters are not visible. When you have the white menues, the term "deactivated" is quite readable. (This bug is existent from the beginning with Android 8 - i chatted on this topic with the customer service of Huawei last year but that guy had no blink of an idea, he sounded very unexperienced.)
My Device:
Unbranded, European version, yesterday received the update.
Wonder if anyone experienced same difficulties and perhaps if there are solutions to this.
Have a good day
Whenever you do a significant upgrade, do a factory reset. This cures most problems, people need to start doing this rather then moaning.
Quite a good idea - but I am long enough into the smartphone scene (since Windows CE and Mobile) to know well that "factory reset" is unfortunately not the magic solution to all problems as some would like it to be...
Of course factory reset is done. Problems are still there, and to be honest - we would have not awaited it as a solution to both bugs i mentioned above a priori, would we?
Well besides I recognized another bug or feature(?)
3. Bug (or feature?):
The native mail app no more shows contacts pictures left to the associated mails.
Does someone know if this is somehow configureable?
Thx in advance
Hi,
found next bug.
4. Bug:
Fast double tapping the "square button" works inconsistently.... It should switch between the two last apps in the tasklist..... May be it has to do with a little time delay / time lag in reaction of EMUI9/Pie... I have the slight feeling that the OS is not that fluent as before (under Android 8)
I hope that is it....
That AI thing in the left most corner in the camera APP is not working, it is the same button as the one you see next to the search bar when you swipe down for searching. I think it used to be some kind for scanner or products? Now the button just flicks and does nothing.
ppcppcppc said:
Hi,
found next bug.
4. Bug:
Fast double tapping the "square button" works inconsistently.... It should switch between the two last apps in the tasklist..... May be it has to do with a little time delay / time lag in reaction of EMUI9/Pie... I have the slight feeling that the OS is not that fluent as before (under Android 8)
I hope that is it....
Click to expand...
Click to collapse
Put High performance... I don't know where (probably battery settings?) As I haven't received yet OTA but seems that with that setting the double tap on square against slopes to switch between apps fluently
kotidoti said:
That AI thing in the left most corner in the camera APP is not working, it is the same button as the one you see next to the search bar when you swipe down for searching. I think it used to be some kind for scanner or products? Now the button just flicks and does nothing.
Click to expand...
Click to collapse
Working on my device, I had to confirm the consent before... Maybe u clicked it into the background?
Update:
I deactivated the corresponding Huawei app (HiVision), now it fully disappeared in the cam app and on the lock screen (formerly found at the bottom when you swiped from down to up... The list where the flashlight, calculator and so on appear)
Hey there,
Have you tried to go to battery optimisation (go to settings, hit the search bar on top and start writing "optim" and the first one), then search for "camera" and disable battery optimisation. It solved the problem for me.
I've found that the Pie is more aggresive overall with killing the background apps. I've had to add way more applications (than on droid 8) to the "disable battery optimizations" and to "app launch" (in settings, battery, app launch -> set applications that you want to survive on the background to "manage manually")
ppcppcppc said:
Hello to the XDA Dev Community.
I'd like to start a threat with bugs after the Android Pie update on our devices.
1. Bug:
Camera App forgets the "volume down key" binding. Means, when double pressed in standby mode the cam is not started.
Solution: Sadly this works only temporary - start the cam app and exit or close. After that the above mentioned shortcut / quickstart works for a short time in standby mode.
2. Bug:
This one is still not repaired: when switching to black mode (to lower the battery consumption) one can not see in the apps overview which of the apps are deactivated - the letters are not visible. When you have the white menues, the term "deactivated" is quite readable. (This bug is existent from the beginning with Android 8 - i chatted on this topic with the customer service of Huawei last year but that guy had no blink of an idea, he sounded very unexperienced.)
My Device:
Unbranded, European version, yesterday received the update.
Wonder if anyone experienced same difficulties and perhaps if there are solutions to this.
Have a good day
Click to expand...
Click to collapse
jcalderonv74 said:
Put High performance... I don't know where (probably battery settings?) As I haven't received yet OTA but seems that with that setting the double tap on square against slopes to switch between apps fluently
Click to expand...
Click to collapse
Thanks, will try your idea!
OTA Update: Against all info - the update was found by manual search in the standard system settings. As it was found I parallely checked HiCare App - NO updates were found, it was a joke!
So maybe also check this way, do not trust HiCare alone.
Update:
Found and activated the performance mode (as you said - battery settings). Sadly no change in performance of the app-switching.
Ereniemis said:
Hey there,
Have you tried to go to battery optimisation (go to settings, hit the search bar on top and start writing "optim" and the first one), then search for "camera" and disable battery optimisation. It solved the problem for me.
I've found that the Pie is more aggresive overall with killing the background apps. I've had to add way more applications (than on droid 8) to the "disable battery optimizations" and to "app launch" (in settings, battery, app launch -> set applications that you want to survive on the background to "manage manually")
Click to expand...
Click to collapse
You made my day, thx!
Disabling the battery optimization for the cam app is the solution. It works even after restart of the device without starting the cam app before!
Thx again!
jcalderonv74 said:
Put High performance... I don't know where (probably battery settings?) As I haven't received yet OTA but seems that with that setting the double tap on square against slopes to switch between apps fluently
Click to expand...
Click to collapse
Hi,
It helps a bit, but still inconsistently working, even after restart of the device. I also tried to put EMUI into the AppAssistant app to enforce it, but the app is not selectable (guess it should be HiStart, EMUI or something like that)...
Only solution atm is to SLOWLY double-tapping the square button.
ppcppcppc said:
Working on my device, I had to confirm the consent before... Maybe u clicked it into the background?
Update:
I deactivated the corresponding Huawei app (HiVision), now it fully disappeared in the cam app and on the lock screen (formerly found at the bottom when you swiped from down to up... The list where the flashlight, calculator and so on appear)
Click to expand...
Click to collapse
Update on this issue, I tried to clear data and cache which brought me back to give consent again and all but it still didn't work. What I did was disable it, which tuned it into factory default and then enabled it again and wolah, it works again. Thanks for informing me about the app name btw, would have been impossible without it. HiVision.
Calendar invites for office365 meetings cannot properly be accepted on the device. it sends the originator a 'not supported format.ics' file - rather than actually accepting the meeting.
Pretty stupid tbf. I'll look to move off the standard mail client i reckon
My P20 Pro (C782) finally prompted me to updated to Pie today, but having done so I'm experiencing choppy / clipping / stuttering audio when connected to my Sony WH-1000XM3's (using LDAC codec). This wasn't happening on Oreo at all.
I've done a factory reset, but the issue persists. Happens throughout whatever's playing (Spotify, Tidal, PocketCasts, YouTube) and is especially noticeable when pressing the power button to activate the screen.
Any ideas?
Anyone else having problems with the volume rocker?
I can't slide the volume to the left to get multiple profiles. Isn't it possible with the pie update?
zizzyboi said:
Anyone else having problems with the volume rocker?
I can't slide the volume to the left to get multiple profiles. Isn't it possible with the pie update?
Click to expand...
Click to collapse
Wonder if the volume rocker is not vertically orientated in Pie. Mine is working good, sliding down goes to silent. Above the slider is a button for vibration, sound and silence.
AWretchSavedByGrace said:
My P20 Pro (C782) finally prompted me to updated to Pie today, but having done so I'm experiencing choppy / clipping / stuttering audio when connected to my Sony WH-1000XM3's (using LDAC codec). This wasn't happening on Oreo at all.
I've done a factory reset, but the issue persists. Happens throughout whatever's playing (Spotify, Tidal, PocketCasts, YouTube) and is especially noticeable when pressing the power button to activate the screen.
Any ideas?
Click to expand...
Click to collapse
Hi, seems to be known and somehow a bug in Android 9 with Huawei components, let us hope for updates...
https://forum.xda-developers.com/huawei-p20-pro/help/bluetooth-issues-android-pie-clt-l29-t3889110
Naffets said:
Calendar invites for office365 meetings cannot properly be accepted on the device. it sends the originator a 'not supported format.ics' file - rather than actually accepting the meeting.
Pretty stupid tbf. I'll look to move off the standard mail client i reckon
Click to expand...
Click to collapse
Sounds to be a limitation by Huawei software...
I also recognized following bug (Android 8 & 9):
If I configure any mail account to "manually" in the native Huawei mail app, the app still looks for mails after a time when i only open the inbox....
Same situation when device goes into ultra power saving mode or automatically powers off because of low power....after return to normal state or reboot after charge the app now looks on all mail accounts for new messages itself/automatically. This happens when WIFI was on before powersaving mode or power off. As soon WIFI is available at startup or return to normal mode aforementioned situation occurs.... Can be avoided by canceling WIFI connection to the server/router....
That is indeed annoying!
ppcppcppc said:
Wonder if the volume rocker is not vertically orientated in Pie. Mine is working good, sliding down goes to silent. Above the slider is a button for vibration, sound and silence.
Click to expand...
Click to collapse
And what does sliding to the side do?
It should show all the profiles like media, alarm and phone volume? No?
I noticed that the homescreen shortcuts, that arised if you press and hold on the Phone Manager icon, were removed. Too bad, would link the power mode to homescreen. Even better would be a shortcut in the Quick Settings.