a0aa7130b6fd13dda5e5eca45b2cf09ca2ec024e
Let's try that!!
Will test on Prophet S200 2.10.
Thank you
Cool, will also give it a try as soon as I have some free time.
Hi, i will test it on a Htc P3600 with Portuguese Rom.
Will try it on my universal
I'll try on HTC TyTN
Ill try it on the HTC wizard in my spare time
Thank you all. Please post any cons/pros you might have.
Cheers,
Raul
The wlan manager is the same from the wm5? I'm asking this because I can't connect in wlans with broadcast off (wpa mode).
Thanks.
a0aa7130b6fd13dda5e5eca45b2cf09ca2ec024e
wizard
I tried it on the HTC wizard and it worked but is there a way to change the gprs connections because it only show two that i dont use. mms and wmodem only show up and i need to know if there is a way to at least show the other connection i have. Im running on the SuperRom from Johnnnnnnnnnny
a0aa7130b6fd13dda5e5eca45b2cf09ca2ec024e
Thanks i dont know why i did not try it. everingthing works but i just upgraded to wm6 and everything works on it but does the program always start up or just starts up on the program tray on wm5
I've already done this, added manually and then I force to connect withou success. Why can it be more unsecure? It still have a passkey.
Thanks.
Related
So I thought I had found ROM nirvana with ver 5.1.2 of mattr_k's (and then continued by the loon) ROM kitchen based on the ingenetics build. I had everything set just the way I liked it with all the programs I wanted and none I didn't, lots of free memory, good response yadda yadda yadda... I figured I was good as far as flashing until I picked up a Kaiser in a month or three.
Then I bought a Tom Tom 720 as a GPS device. It uses bluetooth to transfer data to access the TomTom Plus services that include traffic. The problem is that it requires a DUN modem connection on the bluetooth. From what I have been able to gather, this was available on WM5, taken out in an AKU pack and then re-deployed with WM6, which is why I was surprised that the ROM I was running didn't have it.
I saw that mfrazzz's ROM v3 says that DUN is back, but the lite doesn;t have what I need and the full has stuff I don't want, so even though I know that he builds awesome ROMs I kind of got used to the personalized feel of using the kitchen to get just what I want.
Does anyone know of DUN is present in ver 5.2.5 of theloon's ROM, or if there is a easy way to add DUN capabilities to my current setup? I guess I could extract mfrazzz's ROM and take out what I don;t want and add what I need, but I am traveling on business this week and don;t have a lot of spare time and need my device to be up and running.
Thanks much in advance.
UPDATE
I found this posting by Meneisyys http://www.pocketpcmag.com/blogs/index.php?blog=3&p=2121&more=1&c=1&tb=1&pb=1 and I seem to be getting further along than before but I am not there yet, which I suspect is due to Tom Tom since it is asking me for wireless carrier data and giving me two cingular options as well as AT&T wireless.
***
Okay I think the meneisyys hack definitely worked since the 720 now says that it can use wireless data services, which it didn't before but none of the settings seem to work. It asks for a phone type and carrier. I have been trying the Qtek9100 since that is on the list and an equivalent to the 8125, but it also has a couple of MDA options as well. It gives me three carrier providers, AT&T, Cingular and Cingular media works. I have tried all three and no joy.
I also tried setting it up manually with the following settings but no love
access point: wap.cingular
username: [email protected]
password: cingular1
Auto DHCP
Auto DNS & Manual to 208.67.222.222 (open dns)
Dial *99# and *99****1#
login script +cgdcont=1,"ip","wap.cingular"
Any ideas on what these shoudl be or if I should be looking at the Tom Tom or the phone as the source of the problem?
Thanks!!!
Bluetooth DUN profile
Here is the perfect fix for your problem.
This is not my work I found it in this forum and credit should go to person who ever created this cab file.\
Now lets move on
install this cab and then do soft reset
now your tomtom should be able to pick-up dun connection from your PDA
now you can setup connection from your tomotom using cingular/att settings.
villaboy25 said:
Here is the perfect fix for your problem.
This is not my work I found it in this forum and credit should go to person who ever created this cab file.\
Now lets move on
install this cab and then do soft reset
now your tomtom should be able to pick-up dun connection from your PDA
now you can setup connection from your tomotom using cingular/att settings.
Click to expand...
Click to collapse
villaboy - Thanks for the tip but still no love from the Tom Tom after this. I also noticed that it does not seem to want to set up bluetooth phone capability or address book import now, just wireless data so not sure if this is a step forward or backward
what did u guys download to get ur spl 2.26 mine is stuck at 3,08
cujo316 said:
what did u guys download to get ur spl 2.26 mine is stuck at 3,08
Click to expand...
Click to collapse
Actually my profile is stuck... I uploaded my SPL a while back to 3.08
dcdivenut said:
I saw that mfrazzz's ROM v3 says that DUN is back, but the lite doesn;t have what I need and the full has stuff I don't want, so even though I know that he builds awesome ROMs I kind of got used to the personalized feel of using the kitchen to get just what I want.
Click to expand...
Click to collapse
If you want to cook it into your own rom, here's the package I created and used for XM6r3.
mfrazzz said:
If you want to cook it into your own rom, here's the package I created and used for XM6r3.
Click to expand...
Click to collapse
Thanks.. I may give theloon's newer version a shot. I was hoping to get the GPS working without having to cook and flash a new ROM. Oh well, if it was easy...
UPDATE & more questions
So I decided to give theloons 6.1 a shot and lo and behold I was able to get my TomTom 720 to play nice with my phone. Then I figured out the difference.
I always install registry wizard, make the reg changes I want, and then uninstall it. I may not be the most elegant, but it works for me. One of the tweaks I always check is, "always have GPRS connected on the 3rd tab"
This time I set up the GPS before I installed reg wizard. Once I installed Reg WIzard and enabled the tweak, the GPS stopped connecting so I started playing.
It turns out that if I have an active GPRS connection the TomTom will not connect. I always leave the GPRS connection active so I can get push mail from my work's exchange server. Does anyone know of a way that these two things can co-exist?
Hi,
I'm pretty familiar with smartphones/pocket pc/windows mobile, but I can't figure this one out...
I picked up a Treo 750 this week and it has the latest WM6.1 ROM and Latest Radio firmware.
For some reason, it will not connect to GPRS/EDGE/3G data on its own. It gives an error about not being able to connect, to which you can then click "dismiss". If I then go to data connections and edit the connection and just click next, next, finish - data will work fine - until the phone is reset and you start over again...
I've tried WM5, 6 and 6.1 ROMS and 5 different radios and they all do the same thing...
Anyone?
afeudale said:
Hi,
I'm pretty familiar with smartphones/pocket pc/windows mobile, but I can't figure this one out...
I picked up a Treo 750 this week and it has the latest WM6.1 ROM and Latest Radio firmware.
For some reason, it will not connect to GPRS/EDGE/3G data on its own. It gives an error about not being able to connect, to which you can then click "dismiss". If I then go to data connections and edit the connection and just click next, next, finish - data will work fine - until the phone is reset and you start over again...
I've tried WM5, 6 and 6.1 ROMS and 5 different radios and they all do the same thing...
Anyone?
Click to expand...
Click to collapse
I have a bit different problem, but seems like yours.. sometimes, it doesnt try to connect, no failure message, but no try, my resolution is having spb gprs monitor, which i ever used, even i had this problem... in this case, only click connect and everything is ok... sometimes it doesnt connect or says message like yours on my other HTC XDAs (9000,9100....) but spb solved it everytime...
aaischa, I tried SPB but no luck...
Interestingly, I tried downgrading to WM5 and it works fine with that...
Anyone else having this problem?
Ok, so I ended up making a Mortscript to automatically connect. I attached it to this message in case anyone else needs it...
afeudale said:
Ok, so I ended up making a Mortscript to automatically connect. I attached it to this message in case anyone else needs it...
Click to expand...
Click to collapse
thanks, I had e the same problem
if only connect.mscr could run by itself
It would be great if connect.mscr could run when ever our treo's with hermes radios lost service. Mine with 154.07.00 once it looses service completely will not reconnect. If this script could run when the unit is not connected say every 10 minutes or so life would be good.
I have the same problem. Running 6.1 on the Telecom XT network in New Zealand...simply going into connections (as it says in the first post) and not doing anything solves it, but it is annoying. Any better solutions?
Radio: 1.56.70.11
ROM: WM6.1 (Treo750_OS5_2_19199WWE_STD)
Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
noone85 said:
Hello.
I have an O2 Xda Exec with Ranju's v7.7 WM6.1
Everything works perfect except the wifi.
Why can't I make it work?
I open the connection manager, push the wifi icon and nothing happens! It stays off!
Can you give me some advice?
Thanks in advance!
Click to expand...
Click to collapse
I haven´t any problem with wifi on Ranju v7.7.
reinstall the ROM.
Actually that happened with every wm6 roms I have put in the past.
For example ranju's v7,6.
Do you think that this happens because I have the sdhc driver enabled?
Hello again.
I did some research on my Universal and found out that my device doesn't recognise the wifi module.
I ran the IPer, clicked on adapter info and there is nothing there! (Maybe that's because I can't switch the wifi on. I don't know)
Then, I ran wififofum and there is nothing as a device..
Can anyone please tell me what to do? Please, I'm desperate!!!!!!!
Is there any chance that you are using the Battery Status plug-in? I've experienced exactly the same problem (can't switch WiFi on) with both versions 1.04 & 1.05. If yes, just try to uninstall it.
Unfortunately I'm not using this plugin..
The only today plugins I'm using is the HTC Home VGA, Resco today and SMB GPRS Monitor.
I also do not use the overclocking application embedded with the ROM and I have the watchdog disabled.
Any other clues??? Please...
i have the exact same problem, with every wm6 i installed, now i tried the 6.1 and thats no good, my pda is useless without wifi
any ideas are welcome, i dont want to go back to a wm5 rom
anyone found the cause of this behavior?
I can sometimes switch WLAN on, after the "switching on" time, I turn my Universal off, then on, and WLAN works.
I have the same problem. It started with Tomal's 8.2 ROM and I think it could be when I started using SDHC. Another thing happens to me is that even if, in Stenigs-->System, the Performance is set to 624Mhz, when I test it with CPUID.exe the processor is working at 520Mhz.
Has anyone tryed to downgrade to WM5?
I've read that somthing may be erased in the UNI EEPROM that is not reinstalled with ROMs. But I've "no idea" about it.
a lot of ROMs has affect by WiFi issue when You protect with WPA PSK. Please search for thread : WiFi WPA-PSK Workaround and BubbleFix Service (CAB and OEM) - STABLE ( 1 2 3 ... Last Page) and install the cab. WiFi will run perfectly
Thanks for your help but my problem is that the wlan doesn't turn the WIRELESS LAN on, not the ecryption used. Without wifi, the Universal is just a very BIG cell.
I've even tried this WIFIService.cab but it hasn't solved the problem.
does not seem to work for Tomal's latest ROM
Hi there,
I have a Qtek S200 WM5 mobile phone. Working good with all options, except for the WPA2 support. I've tried to connect to the Wireless Network at my work, but I could not (needed to install a certificate; but this did not help).
I though: an upgrade to WM6 or 6.1 will work, so I decided to upgrade to WM6.1 (one of the Roms of varanusvincent; which by the way works pretty nice!!!).
Now with WM6.1 I can connect to the wireless network of my work, but as soon as I get a good connection, my screen turns black. The LED lights on top of the phone still show me that the Wireless connection and the Telephone connection are still working.
Does anyone have an idea what's going on?
Thanks in advance for your help!
Check the new Rom from Varanus i solve that problem allready also the recent pdaviet roms have the wpa problem fixed.
Well, I've tried to use one of the latest ROMS of varanusvincent, which should be supporting WPA2...
I guess I'll buy another telephone after all I don't want to change the ROM again now... just finished making all new settings...
Thanks for the reply!
did you change the radio rom.
What do you mean by change the Radio ROM?
Hi.
I've searched this forum for a solution to an irritating problem but no luck yet. I'm running Tomal's excellent 8.20 WM6.1 ROM but can't get MMS to work. I've used a variety of versions of ArcsoftMMS but none of them have worked. I've used the Connection Setup wizard to configure my Uni to O2 UK settings. I also tried to setup a 3 sim that I have but still can't get MMS to work. I've manually configured MMS settings for both sims but still no joy.
Can anyone recommend a version of ArcsoftMMS (or any MMS software) that will work with UK sims running Tomal 8.20 or suggest why I'm having problems?
Thanks
Perhaps you could re-flash the ROM and try again... Better still try a better ROM? Tomal had a few since.
enigma1nz said:
Perhaps you could re-flash the ROM and try again... Better still try a better ROM? Tomal had a few since.
Click to expand...
Click to collapse
Thanks for the reply.
I've reflashed a few times and tried on both my Uni's but still doesn't work. I've tried a few later versions of Tomal's ROMs but I need lots of info on my Today screen & prefer to use my device with a stylus rather than my fingers. Was MMS a recognised problem in Tomal 8.20?
Just wondering if there is any version of Arcsoft that works better on UK sims?
saitch76 said:
Thanks for the reply.
I've reflashed a few times and tried on both my Uni's but still doesn't work. I've tried a few later versions of Tomal's ROMs but I need lots of info on my Today screen & prefer to use my device with a stylus rather than my fingers. Was MMS a recognised problem in Tomal 8.20?
Just wondering if there is any version of Arcsoft that works better on UK sims?
Click to expand...
Click to collapse
hey saitch76, since 8.2 released long time back I cannot really remember bugs/drawbacks at the moment. But MMS should work if a working version has installed.
Have you tried the MMS cab I made earlier, it suppose to work. You also need a post configuration i.e. server, gateway setup etc. after the installation.
My recommandation is: install 8.5 or 8.9, they are reported working so try if the MMS is working for you. It should at least shed some light whether it is problem with the config or the rom itself.
cheers
Think that I've found the problem: I can now send and receive MMS but not when connected via Activesync. Don't know if anyone else has noticed this. It's not a major problem for me but it'd be nice if there was a solution.
BTW does anyone have a link for Tomal's MMS cab?
Thanks for your support guys.
http://forum.xda-developers.com/showthread.php?t=342039
Thanks orb3000!
Don´t worry mate
Even searching you can get lost in so many posts
It just hapened the same to me
saitch76 said:
Think that I've found the problem: I can now send and receive MMS but not when connected via Activesync. Don't know if anyone else has noticed this. It's not a major problem for me but it'd be nice if there was a solution.
BTW does anyone have a link for Tomal's MMS cab?
Thanks for your support guys.
Click to expand...
Click to collapse
Did you have 'Allow wireless data connections (such as MMS or Internet Calling) on your device while it's connected to your computer' ticked when AS was initializing? You know, the set up screens you have to go through before the AS synchronizes. If not - disconnect your device, delete the partnership and connect again.
enigma1nz said:
Did you have 'Allow wireless data connections (such as MMS or Internet Calling) on your device while it's connected to your computer' ticked when AS was initializing? You know, the set up screens you have to go through before the AS synchronizes. If not - disconnect your device, delete the partnership and connect again.
Click to expand...
Click to collapse
Thanks! Investigating now...
Thanks for the advice. Works on my XP laptop with Activesync 4.5 but not on my Vista x64 desktop with Windows Mobile Device Center...