Related
Good evening guys.
My pc (Win Xp Pro) does not recognise my Qtek S100 so i can't upgrade my rom via usb.I have downloaded a recent rom from xda-developers/magician.... to do an sd upgrade method.My problem is that i don't know how to put the rom files from my pc to the sd !!! Ofcourse i have a sa card reader.
I tried a different s100 just to ensure that the cable and pc don't have any problems.Everything went ok.
I want to make the upgrade because i 'm stuck in a Serial V1.00 Screen.
Thanks in advance, and sorry for my english .
first install activesync
Check
usb cable
conect usb cable in diferent usb port.
check activeSync .
archive-conection settings- check box "usb conect" is activate..
Sorry for my english..but i speak spanish..
Saludos.
correct me if i am wrong but :
I want to make the upgrade because i 'm stuck in a Serial V1.00 Screen
Click to expand...
Click to collapse
seems like your device is in bootloader mode
My pc (Win Xp Pro) does not recognise my Qtek S100 so i can't upgrade my rom via usb
Click to expand...
Click to collapse
activesync will only find your device if booted with OS (operating system)
but however you should still be able to upgrade rom tru usb cable just hook up your device with the usb cable and dowload the correct shipped rom for your device and run it from your PC it should find your device and attempt to flash
good luck wiro
!Usb Device not recognised!
Thanks for your replies, but I said that i've connected another qtek s100 with my pc and my usb cable with success.So i have already installed the active sync 3.8.
As Wiro said i'm stack in bootloader mode ! And when i connect the usb cable doesn't display the "USB" but insists with "Serial V1.00".
I want to upgrade my rom from a secure digital (sd) cause i don't have another choice!
I 've been surfing through forums but i only found how to make an sd to upgrade your phone when you have an mda or xda (.nb1 files) . Qtek's roms have .nbf files !!! So i'm looking instructions to make an upgrade sd card with .nbf files (Qtek , Htc Magician) and not .nb1 (Xda)!!
mmm
i sync
rename to
fixed.nb1
i change this and work men ..i copy in sd 512Mb whit
ntrw.exe
good lock ...
Suck me , it doesn't make any change if you give nb1 file different name!!
The s100 looks the extension and start to download from sd.! My problem is that i can't find any nb1 files from internet . The roms that i have downloaded (when extract) have ms_.nbf , nk_nbf , radio.nbf and some dlls and apps via windows upgrade-installation not via sd.
I made a sd back up from another s100 but when i put the sd into my qtek's sd slot says something like "sd download section 1 cannot update", maybe because it's from a different s100 with a different id so the proccess stops . REMEMBER that i can't back up my qtek because the xp doesn't recognise it ! Any thoughts?
Thanks for your replies
and
Sorry for my english
A little question for you expert guys !
I 've made a back up a rom from another Qtek S100 , but when i insert the card into my qtek the update stops because of the different rom ids, i believe . My question is :
could i change the rom id manually with an hex editor or some other tool ????
Mmm
for the id error
you need
ftp://xda:[email protected]/Magician/Tools/MaUpgradeUt_noID.exe
you need connect to usb for this...
but you say that not connect to usb..
The one to publish the ROM is very dangerous...
i don't know this....
sorry..
Check Tools..
ftp://xda:[email protected]/Magician/Tools/
saludos..
thanks for the reply suck me
what do you mean when you say publishing the rom???
mmm
sorry
i want say..
the rom edit hex is very dangerous..
i **** a hp2210 with this system (hexedit)..
sorry but my english...
Bueno solo te quiero advertir que el metodo de editar la Rom con un Hexeditor es muy peligroso.
yo deje inutilisable una hp2210 con este metodo (hexeditor) ..
saludos...
Ok guys, Finally i fixed it.
With new rom , the pc recognise it and everything working good but with no backup battery (as it was destroyed when it went for swimming). It doesn't make any difference.
End Of Thread
My usb isnt working as well... What can i do?
Is there any way i can update it using sd cards?
arisxama said:
Ok guys, Finally i fixed it.
With new rom , the pc recognise it and everything working good but with no backup battery (as it was destroyed when it went for swimming). It doesn't make any difference.
End Of Thread
Click to expand...
Click to collapse
How did you do it? I'va your same problem!
hey guys,
i upgraded my himalaya to wm5 yesterday, but i found dat i couldnt get my wm5 connected to pc after upgrading, the pc doesnt recognize my device, i've tried both activesync 3.7 and 4.0... can any1 help?
Active Sync new version 4.1 [Build 4841]
or go to microsoft homepage to find the latest version.
ok, will have a try.. thx so much :wink:
link to it
http://www.microsoft.com/downloads/...012-8793-d2d180a42dfa&DisplayLang=en#filelist
Hi all,
I have the same problem:
Upgrading to 1.60c.00WWE
Radio 1.17.00
and i have installed activesync 4.1 (last release from microsoft)...
activesync said he try to connect to my qtek 2020 (worked good before rom upgrade with activesync 3.8).
I also try to start from a good windows XP (and clean) version: i format my pc and reinstalled windows xp on it (sp2) + activesync:
same result (device detected but no sync)
on my qtek activesync (in the bottom on screen) said he is connected but not on my pc...
Any idea will help me good, thx a lot !
i got same problems right now, any one help us please
I. Try To use the latest Active Sync Program
II. Try to shutdown or Disable any antivirus or Firewall program
IV. try to restart the computer And the Device (Your PPC)
it will work . .. thanks
Me too
There's something wrong in the OS image. When I connect my Wizard via USB,I have no problems. But Himalaya want not connect. Why? I don't have SP2 in XP(Wizard is working correctly)!
ACTIVSYNC
If you are connected to a usb hub, try not using it and connect direct to computer. that sloved all of my sync issues of the phone not being seen.
hi friends,
i am a software and hardware developer in istanbul , Turkey
i have a O2 XdaII with 1 gb sdram ,
rom : 1.72.00
ext: 1.72.187
radio: 1.17.00
i tried to upgrade my old phone to wm 2005.. but..
first of all i found different types of roms , ext, radios..
i have
WM2003SE 2.06.00WWE XDA2
Wm2k5 1.65b.96WWE
2.06.100a SG Extended ROM
Radio1.18
Radio_XDAII_v1.18
ROM_XDAII_v1.60a.WWE_WM5
WindowsMobile2003SE_XDA2_2.20.00CHS-translated
Xda_II_172187_Final.exe
Xda_II_172181_Final.exe
Xda_II_Extended_16052.exe
active sync 3.8
active sync 4.0
active sync 4.1.0 (build 4841)
hex editors
xda2unlock.exe
and all other crap HTC64, himaupgradeut_noID and etc..
i tried all of the roms, exts, radios all other f#!*ing stuff..
everytime it takes more then 30 minutes..
at the end of every bios updates.. the activesync sometimes gave errors:
* the usb device could not be recognized.
* generic usb mobile device
* this usb device malfunctioned
* connecting... (and tries more then 4 hours and still connecting)
* found usb device (but not recognized)
* found ethernet device (what?)
and so on..
when i tried to install the updater provided by o2 , it works quite good. but it is 2003..
when tried 2003se then it did not work in Turkcell operator..
when tried 2.06 rom then the bluetooth crashed..
when tried 2003se xda2 2.20.00 CHS then it worked but again the activesync crashed..
when tried combination of the o2 provided ext and wm5 rom it worked! yes.. but again i could not install any application to the phone.. because the activesync again could not connect it..
i tried all activesync versions.. even i installed different winxp versions on my computer.. i tried media center edition 2005 and all other (maybe the activesync has problems), i used different language options.
i tried different computers (maybe the activesync doesnt like my computer.. maybe it have emotion, sensation who knows.. )
i wrote a program to reverse the data going out between pc and phone on usb..
i decode activesync and disassembe it but could not found why it is making like that..
sometimes my xda crashed and
at the end, i tear out my hairs..
i became insane..
at last.. now i have radio 1.12 , rom 1.60c wm5, ext 1.72.187
working .. but sometimes.. sometimes not..
when i change the usb port it works..
is there any stable solution to install wm5 on xdaII without having trouble with activesync?
and is there any Turkish language set (other then the mobilera company provided) ?
thanks..
PS: it i will not find any solution in 1 week.. then i will turn back to my Sony Ericsson P910i phone..
also that f*$#ing phone's support site closed the upgrade process..
you can enter the update service site but , you can not update your phone..
(maybe i shell try to breed tomato.. and build a farm.. forget about software development)
I´m sorry of of your bad experiences with w2k5, but my XDA works really fine with windows 2005! I use the latest version of buzzdev.net, which is the 1.65.b or something like that, and I have to say that everything is ok with my sd wifi card, with my 1giga sd card, and with telephone uses...
Maybe, the unique thing to comment is that one week ago, I soft reseted my XDAII, and then the screen was not aligned... AS you know the align proccess it´s only available after a hard reset, or in settings menu. So I had to enter the security numer tryin´ and tryin´the inside out numbers... Finally, after an aother asoft reset, the screen was aligned again...
73´s
i have the 1.65.c version..
can you please look the version you have?
and does the activesync works well?
thanks
Yap, Activesync runs good. The version is: 1.65b.96 WWE.
You can download in buzzdev.net
73´s
at last i solved the problem..
if you install ext rom .. no matter the bios rom version is..
the activesync is not working..
if you just install wm5.x.x version and the radio rom (anyone) and after the update if you press record and camera button while hard reset (power button and reset same time) . a menu appears with 3 options.
the selection order is no,yes,yes ..
after all.. thats all..
the activesync works well..
i tried 4 different roms and it worked..
now i have 1.70a rom..
but whatelse i am missing with not to install the ext rom?
My activesync can't install the magician. How can i update the rom? I try http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade but i can't connect to the pc. Sorry for my english. I'm from romania. Help me please!!!
Can i update rom using sd card?
Can anybody help me??? Please
Dude try re-installing Active sync..Then pick the right ROM for ur Device-and try again
Hope it works out for u.
I tried with all activsync and I can't connect. I must update rom with sd card but i don't know.
I tried with all activsync and I can't connect. I must update rom with sd card but i don't know.
Check the Wiki it has all da info u will need wit step by step info...
I can't find a rom upgrade by sd without backup. I can't make backup because my pocket can't connect to the computer
Can anybody help me?
then i think you can use another computer to upgrade your rom? just borrow your friends.... am i right?
just start ur magician in booatloader mode, and here u go. upgrade ur rom.
romupdate don't see my magician :x
re
on the pda :tick enable pc sync & select usb
than tick maintain connection
--just plug your pda in the usb & wait for to discover the pc your pda
i'm using activesync 4.1
is enable but usb device not recognized :x
I suggest you read through these two threads first. Both of them discuss in detail the procedures involved. What's important is that in ActiveSync, the option "Allow USB Connections" is unselected. Here are the links of the two threads;
http://forum.xda-developers.com/viewtopic.php?t=14973
http://forum.xda-developers.com/viewtopic.php?t=32274
I just got an I-mate JAM with following info:
ROM version: 1010.00 WWE
ROM date: 08/18/05
Radio ver: 1013.00
Protocol: 1337.43
ExtROM ver: 1.12.550 WWE
RAM: 64MB
Flash: 64MB
Model No: PM10A
Platform: PocketPC
which ROM that i should use now?
and can I do it without USB cable? (copy ROM to MMC and install)
I'm living in Vietnam and use English
Welcome to XDA-developers!
Your ROM version is fine, however you may wish to upgrade to the latest 1.13 ROM + 1.13 Radio + BigStorage (by the way, BigStorage is just a way in which you can extend your measly 7MB of Storage to 27MB). However you will need a USB cable for the above method: I highly recommend to invest in one anyway, as you will find installing many programs onto your JAM difficult without one.
I think it is possible to upgrade with just a SD/MMC card and a SD/MMC reader for your computer, however it is considerably more complicated and you will not be able to back up your existing ROM, as you will need your computer to command your JAM during the backup process. You will probably need to merge two upgrading methods in order to get a USB cable-free process, something that no one else has done. Sorry I don't quite have the time for that yet, but maybe someone else can come to your aid!
Is there a technical reason you can't use a USB cable by the way?
EDIT: I forgot this: the reason why you cannot upgrade by just dumping a ROM onto the SD card and letting the JAM upgrade from that is that the ROM must be modified with some special, device unique data from your JAM first before your JAM will accept it. The normal ROM upgrade programs do this via USB by retrieving the device data from your JAM and then applying it to the ROM they are about to send to it. While there is a way to manually get this required data, that too requires a USB cable (see http://forum.xda-developers.com/showthread.php?t=231410).
haaaaalp
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected
buddy28s said:
hi there, i tried upgrading my 02 xda executive from the software update on O2 website.my active sync 4.1 stopped working in midst and my xda is nt working now.and my pc isnt recognising the xda. the xda isnt starting up its completely dead.I tried hitting the 2 softkeys and the soft reset button and the screen lights up and it says to rollback to factory setting hit 0 zero, but nothing happens................plz help would be appreciated.http://www.my-xda.com/xdaExecSoftware.jsp
also the screen now has USB and v1.00 over it and shows nothing but this and not starting up and my pc pops a message up saying that an unknown usb device and cant be connected
Click to expand...
Click to collapse
Please avoid cross-posting, especially since this is the wrong forum. I can't help you anyway - different models of PDA can have very different ways of doing things.
toomuchdogfur said:
Welcome to XDA-developers!
Your ROM version is fine, however you may wish to upgrade to the latest 1.13 ROM + 1.13 Radio + BigStorage (by the way, BigStorage is just a way in which you can extend your measly 7MB of Storage to 27MB). However you will need a USB cable for the above method: I highly recommend to invest in one anyway, as you will find installing many programs onto your JAM difficult without one.
I think it is possible to upgrade with just a SD/MMC card and a SD/MMC reader for your computer, however it is considerably more complicated and you will not be able to back up your existing ROM, as you will need your computer to command your JAM during the backup process. You will probably need to merge two upgrading methods in order to get a USB cable-free process, something that no one else has done. Sorry I don't quite have the time for that yet, but maybe someone else can come to your aid!
Is there a technical reason you can't use a USB cable by the way?
EDIT: I forgot this: the reason why you cannot upgrade by just dumping a ROM onto the SD card and letting the JAM upgrade from that is that the ROM must be modified with some special, device unique data from your JAM first before your JAM will accept it. The normal ROM upgrade programs do this via USB by retrieving the device data from your JAM and then applying it to the ROM they are about to send to it. While there is a way to manually get this required data, that too requires a USB cable (see http://forum.xda-developers.com/showthread.php?t=231410).
Click to expand...
Click to collapse
Thanks for your help, i'll try and tell u the result.