i have Dopod 818 Pro (I-MATE Jam) chinese language i try to update it to english but in upgrade the upgrade stop
now the device don't turne on , the divce give me serial and usb i try to update agine via usb and i update it the first step go ok but in the radio update it stop again (do any professional one have any idea) the jam still give serial and usb
Related
While upgrading to the radio 1.13 there was "114 Radio ROM Update Error". Now my S100 boots only in boot loader mode and i think it doesn't have any radio installed at all! and i cannot install any radio too. Help please!
Hi,
Try To flash with a complete shipped-rom from your own provider or from the ftp. Keep it in bootloader while you plugin the usb cable. Make sure usb connections are allowed for Act.Sync & start the update program. This should get you your magician back.
Cheers, M
i just upgrade my dopod 818pro rom...after finish upgrade my dopod stuck at dopod bootable screen..so i do hard reset.but still same.but now my dopod not function at all.plz someone help me?
ayien said:
i just upgrade my dopod 818pro rom...after finish upgrade my dopod stuck at dopod bootable screen..so i do hard reset.but still same.but now my dopod not function at all.plz someone help me?
Click to expand...
Click to collapse
Hold Camera button, and reset. keep holding the camera button, and you will get to bootloader. just connect your phone to the computer and downgrade your phone to an original aku 2.2 rom. if you didn't understand what i said ,read the forum. there are so many people asked this question before.
good luck
i also do that..
i also do that after my dopod stuck at dopod screen...after that my dopod not function.nothing happen.i try to charges,also nothing happen...plz....
Hi everyone,
My qtek s200 dont boot, i just try hardreset, update rom in bootloader but nothing result..
Qtek stays in operator logo
IPL 2.10.0001
SPL 2.10.0001
GSM 02.69.21
OS 4.0.0.0
This happens because i was trying update rom to os 4.0.0.4 and there was a error during de instalation.
Then i try connecting again with activesync 4.5 but there was no conection.
now the qtek dont boot to operating system
Help me please.....
downgrade to wm5,upgrade to wm6,everything should work fine.
wich file?
how can i downgrade to wm5 without activesync?
by bootloader?
Wich file and where i find?
Thanks for your help!!
finally i ugprade to prophet 2.20.7.34 and my s200 is alive again...
Thanks....
How? Same problem here
same problem
i have tried again again end again, and now it's ok
note :
at the end of step 1, when s200 said "tap on screen" -> i have taped
after i have start step 2 as indicated in the tutorial
Good afternoon,
first you must conect pu s200 in bootloader mode (press camera button and make reset with your sylus pen- screen must appear three colors) then plug usb cable, then run the upgrade/downgrade rom
In the end the qtek reboot, install de apps and you must make software reset
Bye
Ratzumen
I have the same problem here. I had the wm6 rom on my qtek s200, but my headset worked not fine with it. So i tried to downgrade to the aku 3 rom for my s200. It seems ok. But when i turned the pda on, id didn't go further that the qtek boot screen. I also could not get to the bootloader screen to update another rom. What can i do?
i'm very very stupid , i have installed my Magician 818 T-Mobile (Compat I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 compact I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
now my magician is totally cannot enter the OS , only stop at the Dopod Logo(not the OS logo).
pls help me...
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
jeaqueline said:
i'm very very stupid , i have installed my Magician 818 T-Mobile (MDA I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 MDA I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
Click to expand...
Click to collapse
Hey dude..bit more info might b nice...what error is it saying? connection error? or ROM error? or what?.. and if it's connection, what OS u running? you need special drivers for the Magician if you're running Vista..
Try unplugging you battery then plug it back - press power button - it will work but just until you press reset. And no more upgrades
jeaqueline said:
i'm very very stupid , i have installed my Magician 818 T-Mobile (Compat I) with phrophet.
so.. i can't use my magician anymore.
this is the information have changed
IPL 2.06.0001
SPL 2.G4.4PDA
GSM 02.19.21
OS 5.2.19.48
Now.. I already download form www.t-mobile.com <--- WM5 for 818 compact I
but... i have problem then.
i extract the ROM file, copy MaUpgradeUt_NoID.exe into same folder, changes my 818 to bootloader mode, USB connected (but activesync can't connecting-of course)
Using MaUpgradeUt_NoID.exe it says error i try again and again and again and again.. but.. no result .
now my magician is totally cannot enter the OS , only stop at the Dopod Logo(not the OS logo).
pls help me...
Pls help me, i need to get back OS normal ^^
help me bro...
-Jakarta-
Click to expand...
Click to collapse
hey dude this dopod logo is really an irritating prob u knw wat jus do a hard reset once n den try coz dopod logo take long long time to go n enter the boot loader mode..
so jus giv it a try i hope it works for u ..
Regards Chigz..
I have a Qtek S200 it is unlocked and i just want to change its language but when i upgrade it there comes an error after some time of cable connection like 260 or 264................
I functions normally with Active Sync and Mobile is also functioning well its working normal i tried with different cables i also done hardspl as well i also know my mobile is G4 and i also tried in bootloader and normal way but all in vain
How can i upgrade my s200 now experts plez help.....