The old way to change your 1st splash screen uses the awizard prog or the splash_bmp_to_wizard prog. It was working before on the older ROMs.
Thanx to jesterz, mwiberg & lvsw & others, we now have many new ROMs to choose from. Unfortunately, the above method to change the 1st splash screen no longer works on these new ROMs. It always gives the ItWriteDisk error.
After crawling through the Wizard forums, I discovered they have found a way. Can't really remember the threads (there were several of them). For those who want to change their splash, just download this file: ftp://xda:[email protected]/Wizard/Splash_images/SplashScreenStuff.zip and follow the instructions included to the letter.
Warning: some hex editing is involved.
- all credits to the guys over at the Wizard forum.
PS: to change your 2nd splash, it is a simple matter of saving your image as a 240x320 png file, renaming it as welcomehead.96.png and copying into the windows folder of your device.
Good luck!
Be carefull NOT to use the ROM upgrade util in that zip, it for the Wizard, NOT the prophet.
get it from a Prophet ROM upgrade.
Enjoy !
Splash screen change
Hi, I can confirm this works. I used this download as the base for the splash rom and followed the instructions in the download from the first post.
cheers
P.S. my rom is RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship (G4) with Ext Rom unlocked and writable
compactrom said:
Hi, I can confirm this works. I used this download as the base for the splash rom and followed the instructions in the download from the first post.
cheers
P.S. my rom is RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship (G4) with Ext Rom unlocked and writable
Click to expand...
Click to collapse
I have used the same splash logo mentioned above and it works perfectly on my prophet as well...
http://forum.xda-developers.com/showthread.php?t=284006
Could we incorporate the above link method from wizard to prophet??
Jesterz said:
Be carefull NOT to use the ROM upgrade util in that zip, it for the Wizard, NOT the prophet.
get it from a Prophet ROM upgrade.
Enjoy !
Click to expand...
Click to collapse
Yes, the upgrade utility in the zip file is for the Wizard. So what I did was to use the upgrade utility for the Prophet instead. Use the G3 or G4 version depending on your device.
There should be the following files:
enterbootloader.exe
nk.nbf (your created splash imge)
romupdateutility.exe (G3 or G4 version depending on your device)
ruugetinfo.exe
ruuresource.dll
Somehow for me, the romupdateutility-novendor doesn't work. So to get the romupdateutility for my device, I extracted it from a full ROM such as RUU-Prophet-G3-AKU2.2-2.20-2.47.21-Jester-b1
Hope this clarifies things a bit
AbuYahya said:
http://forum.xda-developers.com/showthread.php?t=284006
Could we incorporate the above link method from wizard to prophet??
Click to expand...
Click to collapse
The method in that thread is similar to my 1st post. Maybe the utilities they used are different. All the steps prior to the flash are the same. They are for converting a bmp file to a nb file and then to a nk.nbf to be used for flashing. It should work on the Prophet PROVIDED you use the prophet update utility (not the Wizard's) to flash.
wilson77 said:
I have used the same splash logo mentioned above and it works perfectly on my prophet as well...
Click to expand...
Click to collapse
Using that file will give you the HTC black logo. The steps I mentioned will allow you to use any customized image...
Could somebody please post an image of the HTC Black logo to see what it looks like before I try the standard update (i.e. from the FTP server & without using the HEX edit thingie...)?
Thanx!
The Black HTC Logo's
This will ONLY replace both Splash Screens, it will NOT install or change anything else !
1. The White HTC logo will be replaced by a black image (nothing on it)
2. The Second Splash Screen will be replaced by a nice HTC Logo.
Download Here
Jesterz said:
The Black HTC Logo's
This will ONLY replace both Splash Screens, it will NOT install or change anything else !
1. The White HTC logo will be replaced by a black image (nothing on it)
2. The Second Splash Screen will be replaced by a nice HTC Logo.
Download Here
Click to expand...
Click to collapse
this will work with a g4 prophet right ?
yes, it works on G4...
W4R_M4ST3R said:
this will work with a g4 prophet right ?
Click to expand...
Click to collapse
yes, it works on G4...
Putra said:
So to get the romupdateutility for my device, I extracted it from a full ROM such as RUU-Prophet-G3-AKU2.2-2.20-2.47.21-Jester-b1
Click to expand...
Click to collapse
Pardon the newbie question, but how does one extract the RUU (and the other 4 files) from the full ROM? I have Jester's G3 r1 file but it's an exe, not a zip. Is there a site from where I can get the latest Prophet G3 RUU package?
RUU extraction
JimsEvilTwin said:
Pardon the newbie question, but how does one extract the RUU (and the other 4 files) from the full ROM? I have Jester's G3 r1 file but it's an exe, not a zip. Is there a site from where I can get the latest Prophet G3 RUU package?
Click to expand...
Click to collapse
Let's see if I remember this correctly:
1) double-click your .exe file -> it should start up the ROM update window as normal.
2) Go to windows/temp folder. You should see the files that the exe file extracted. (if you cannot find it, do a search for *.nbf or one of the other files - the file would be in the same directory). Maybe it is in documents and settings/user/local settings/temp in Win XP. I can't remember exactly as I'm on Vista now.
3) copy the RUU file to a separate folder.
There you have it.... unless I miss something.
You were right, Putra, it was the D&S\...\Temp folder. Thanks!!!
G3 version
a little bit confused: which version I have to use to update the splash screens on my G3? Is there a tool where I can load only the splash screens and it will update the prophet ROM?
Jesterz said:
The Black HTC Logo's
This will ONLY replace both Splash Screens, it will NOT install or change anything else !
1. The White HTC logo will be replaced by a black image (nothing on it)
2. The Second Splash Screen will be replaced by a nice HTC Logo.
Download Here
Click to expand...
Click to collapse
This will work on my Prophet G3?
PORTUGUESE_2130926_21309115_20720 PHOPHET ROM (iMATE)
Edit: Yeah it works , thanks Jesterz
/FiShBuRn
The link doesnt seem to work anymore, but I'd like to have it, does anyone want to upload it for me?
Jesterz, i might ask u if u can create a splash screen replacer with this settings:
1. The White HTC logo with black background
2. The Second Splash Screen will be replaced by a nice HTC Logo.
Thanks in advance
/FiShBuRn
JimsEvilTwin said:
Pardon the newbie question, but how does one extract the RUU (and the other 4 files) from the full ROM? I have Jester's G3 r1 file but it's an exe, not a zip. Is there a site from where I can get the latest Prophet G3 RUU package?
Click to expand...
Click to collapse
If u have winrar installed on PC, then just right click on any exe, and u will get extract options. Extract to any folder as u want, and get all files inside that exe.
Related
Hi,
I have been on this site for about a week now. I was drawn here by the desire to take my Imate JamIn up to WM6.
So I pulled from the web the file:
RUU_Prophet_220734_2207114_024721_NVID_QTEK and hurled it onto my PDA
It went from Imate to QTEK but still worked pretty well. So I then went and loaded Upgrade Happy from a site in Roumania.
This loaded but was distinctly unimpressive and unstable so I managed to downgrade to the WM5 file above again.
Then I tried Smart1's v2 WM6 file and this went on OK. However, I have experienced a few issues with the battery and other things like Timewizard, etc.
So I have gone back to the NVID_QTEK WM5 file again.
BUT I would really like to put back on my Imate ROM which I have stored away. Sadly, whenever I try and load the ROM it states that the version is lower and I can only do an UPGRADE ( I get a 286 error).
I have searched here and Google and think that I can Un CID my phone (not actually sure what this does mind). I have read posts suggesting that once done I can load any version of any Prophet ROM on my PDA.
I went off and ended up on PDAMobiz and pulled down a file called:
PDAMobiz.com_ProphetAKU2_unlockCID.rar
But this site is incredibly slow and the file is corrupt when I finally get it down.
Can anyone explain to me whether it is possible to get to reload my earlier ROM version Imate ROM? If it is can anyone explain what I need to do and perhaps put up a link to an area where I can pull the tools down.
This website has a great reputation for helping each other out and I am sure that my ignorance will be forgiven,
Kind Regards,
Sam.
Hi
This is because you have upgraded your ipl/spl and these can't be downloaded.
But don't worry it's not a problem
if you have the original rom you should have a .nbf file?
You can use typho5.exe -x xxx.nbf (whatever it is called) this will extract the individual elements (ipl/spl/os/extrom/radio/splash screens) as .nb files.
Then use nb2nbf to build a new nbf file without spl/ipl parts. copy this file back to your backup folder (rename the original one first) and install again
Good Luck
Thanks - I have just a couple more dumb questions...
FlykThewiz,
Many thanks for your help.
I have the file:JAMin_WWE_213923_2139123_022021_shi.exe
Do you know how I get the .NBF out of it?
Also,
You couldn't point me to the tools you mention could you?
If I do what you said then do I get back my own Imate Splash screen too?
Do you know if I will suffer any problems with things being different versions?
Once again many thanks I will let you know how I get on.
Kind Regards,
Sam.
You can use winrar (free download - search google if you don't have it) to extract the files in your exe.
One of the file will be the nbf.
I will sort out the instructions for you but I have to go out for a couple of hours at the moment.
T H A N K Y O U
flykthewiz,
You are simply The MAN
Many, Many thanks,
Sam.
I don't know about being the man - i had the same problem myself.
Attached is a zip file with the two tools you need.
I suggest you create a folder called c:\rom and copy the contents of your exe file and these to programs into it.
goto a dos cmd window and cd \rom
type "typho5 -x nk.nbf" (no quotes)
you will then have a number of *.nb files in c:\rom
rename nk.nbf to nk.org
send me the list of nb files you have.
ZIPPED with winzip 12
Hi flykthewiz
is 92000000-Splash.nb is the imate pic when softreset
cause am using AKU3.3.13.ASERG after I unlocked my Jamin with RUU_Prophet_220734_2207114_024721_NVID .... and want to go back only for the Imate screen instead of QTEK, and can I flash with it only
thanks
Splash Screens
There are two splash screens - the one you mention is the first (often blank)
The second is 9d000000-xxx.nb this is the one that is displayed most of the time when the phone is booting. To enter this in nb2nbf you need to manually enter "HTC Logo" as the image name.
secoseco said:
Hi flykthewiz
is 92000000-Splash.nb is the imate pic when softreset
cause am using AKU3.3.13.ASERG after I unlocked my Jamin with RUU_Prophet_220734_2207114_024721_NVID .... and want to go back only for the Imate screen instead of QTEK, and can I flash with it only
thanks
Click to expand...
Click to collapse
FlykTheWiz,
Thanks for the tools.
The files I have are as follows:
30/03/2007 13:50 59,768,832 80040000-OS_0.nb
30/03/2007 13:50 786,432 91000000-SPL_1.nb
30/03/2007 13:50 786,432 91000000-SPL_2.nb
30/03/2007 13:50 196,608 92000000-Splash.nb
30/03/2007 13:50 2,621,440 96000000-GSM_0.nb
30/03/2007 13:50 10,485,760 9b000000-Extension.nb
30/03/2007 13:50 65,536 9d000000-HTC.nb
28/03/2006 15:51 74,713,088 nk.nbf
16/09/2005 12:20 53,248 nb2nbf.exe
13/03/2006 19:09 784,972 typho5.exe
I have loaded up the nb2nbf file but have no idea what to do with it - The only option appears to be for a Tornado...
Thanks,
Sam.
Ok
fill in nb2nbf like the image in the attached zip file.
Important notes:
1. use the ... browse buttons to select your files and the length field will be filled in for you (the image shows mostly zeros)
2. the image name for the extended rom is Extension Rom (not Extended) and you have to type it manually - its not in the drop dow list.
3. the start address for OS.nb is 80040000 (not 82040000 which the program defaults to)
4. you need to manually type HTC Logo in image type - its not in the list.
Do not add the ipl and spl files! (these are the ones that are causing your problems)
When its all filled in click on Translate and when that is finished exit the program.
If you have copied all of the contents of your extracted exe to c:\ROM you should have a program called ROMUpdateUtility.
Connect your pda to usb and run this program and follow the instructions (you've done this before )
After its finished your phone will hard reset and you should have your original ROM.
It doesnt matter that ipl and spl are different versions
Good Luck
flykthewiz said:
There are two splash screens - the one you mention is the first (often blank)
The second is 9d000000-xxx.nb this is the one that is displayed most of the time when the phone is booting. To enter this in nb2nbf you need to manually enter "HTC Logo" as the image name.
Click to expand...
Click to collapse
thanks for replay
in Imate rom, splash screens and HTC Logo are differ from NVID QTEK rom
Can I flash only those 2 files to get back the Imate screen
thanks
Yes you can
secoseco said:
thanks for replay
in Imate rom, splash screens and HTC Logo are differ from NVID QTEK rom
Can I flash only those 2 files to get back the Imate screen
thanks
Click to expand...
Click to collapse
Nearly there
FlykTheWiz,
Many thanks for the instructions. I have done what you suggested with NB2NKF
However, When I try to run my RUU utility I get error code 238 Cannot Read the file.
I extracted all files into a single directory and replaced the default .NBF with my new one. Then ran the RUU tool.
Am I being a numpty?
Many thanks,
Sam.
hmmm
Try the appropriate RUU from the attached
If your ipl ends in .000 use G3 version
if ends in .0001 use G4 version
T H A N K Y O U
I would just like to thank you for your kindness and patience. I have now got the HTC device reblown to the original condition that I started from (with the exception of the IPL/SPL).
Using the G4 utility worked for me.
On the way I have learned a great deal and appreciate your assistance.
Thank you very much,
Sam.
No problem at all
flyk (definitely) thewiz !!!
Flykthewiz... Many thanks for your input to this thread... your tutorial has helped me (and many of us) more than almost ANY other on this site!!! You are obviously very knowledgeable in this "art"!!!!
Since we have not seen much input from Jesterz or Smart1 lately (I can understand that it is time-consuming...!) , can I suggest that maybe you could take up the reigns and offer to this community your first Prophet ROM build??? (Any +AKU base will be a help??)
Please do consider doing this - I *know* you can do this and although I appreciate it can take a lot of your personal time and effort to achieve.. I am sure that your contribution will be appreciated and valued by us all, if u were to attempt such a project!!?
If not, we do understand... but please stay around here and continue to help us all with your flykth-wiz-dom!!!
Moz.
Thanks for your vote of confidence, but I have to say - you must be joking
I only started looking at modifying ROM's 2 days ago and it is a minefield. I have absolutely every respect for Jesterz, Smart1, Nghianha, and all of the guys over at PDAMobiz. I think it will be a long while before I am anything like of their calibre!
Mozzerr said:
Flykthewiz... Many thanks for your input to this thread... your tutorial has helped me (and many of us) more than almost ANY other on this site!!! You are obviously very knowledgeable in this "art"!!!!
Since we have not seen much input from Jesterz or Smart1 lately (I can understand that it is time-consuming...!) , can I suggest that maybe you could take up the reigns and offer to this community your first Prophet ROM build??? (Any +AKU base will be a help??)
Please do consider doing this - I *know* you can do this and although I appreciate it can take a lot of your personal time and effort to achieve.. I am sure that your contribution will be appreciated and valued by us all, if u were to attempt such a project!!?
If not, we do understand... but please stay around here and continue to help us all with your flykth-wiz-dom!!!
Moz.
Click to expand...
Click to collapse
help for step by step help for change boot logo imate jamin
Hi all:
1. how to extract tools.zip on pc
2. my pda (i-mate jamin) and update smart1-new v2 . don't like change i-mate boot logo to Qtek how to change boot logo to original i-mate jamin?
thanks for step by step help.
"...a long while..."??? I don't think so!!! Still, your openess and willingness to share what you have learned in such a short while is refreshing to see on this forum!! I still say T H A N K Y O U ! !
flykthewiz said:
Thanks for your vote of confidence, but I have to say - you must be joking
I only started looking at modifying ROM's 2 days ago and it is a minefield. I have absolutely every respect for Jesterz, Smart1, Nghianha, and all of the guys over at PDAMobiz. I think it will be a long while before I am anything like of their calibre!
Click to expand...
Click to collapse
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Yes
Read through this thread - there is a bit in the middle that discusses this
http://forum.xda-developers.com/showthread.php?t=300356
animelover said:
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Click to expand...
Click to collapse
See also on xda ftp
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
What boot screen are you looking for? Or do you want to creat your own one?
Yes, I want to use my own! It's an Anime picture like my nickname!
welcom screen
ady_uaic said:
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
Click to expand...
Click to collapse
well i had read the forum instructions and for change boot and welcom screen.
but something is wrong with the typho5. its suppose to extract nb 9200000 files but the application starts without extracting nobthing.
i would like to change the welcome screen from the PDAMobiz to some thing personal. i follow instruction but they dont fit the results i get.
any idea?
thanks to all
specially to the guys in PDAMobiz, who made the best of the best Rom
I want too to make a personal bootscreen...if someone can help us with a little tutorial, we are waiting..thx
Try this
The pdf manual in this thread has a section on updating boot screen and all the tools required to do it are included too.
I do not suggest everybody trys to get into the ROM cooking that is also described, but the splash screen section is fairly straitforward
http://forum.xda-developers.com/showthread.php?t=297027
first, with this tool you can create your own ROM (customized)...and also splash screens...see the manual pdf
welcomehead.96.png
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
xmanmaster said:
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
Click to expand...
Click to collapse
flykthewiz said:
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
Click to expand...
Click to collapse
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Worked for me
You do need to use a prophet nvid ruu program though
ady_uaic said:
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Click to expand...
Click to collapse
can you please tell me what exactly should I do?
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
GAMBIT999 said:
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
Click to expand...
Click to collapse
so everything that you've said there, in that txt file, is for qtek s200, isn't it? now i'm going to try
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
ady_uaic said:
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
Click to expand...
Click to collapse
If you have created your nk.nbf file, you can replace the one in this file (rename it to zip)
rename it back to exe and execute, it worked on my prophetG4 with WM6 on it
Instructions for flashing custom splash screens on HTC Kaiser:
1. Install HardSPL.
2. Create a BMP file in paint, size must be 240x320, save it as BMP 24bit.
3. Download SplashTool
4. Load your BMP on nb_image_converter (included in SplashTool's zip) and save it as splash.nb
5. Open SplashTool.exe and convert splash.nb to new format.
6. Pack the resulting splash.nb into a NBH file using htc rom tool.
7. Flash your cusotm NBH using CustomRUU.
Enjoy your new splash screen!
pof said:
Instructions for flashing custom splash screens on HTC Kaiser:
6. Pack the resulting splash.nb into a NBH file using htc rom tool.
7. Flash your cusotm NBH using CustomRUU.
Enjoy your new splash screen!
Click to expand...
Click to collapse
Hi pof.
This is a great idea and I thank you for the instructions but I got to #6 and am so new to ROM building(virgin, in fact ) that I must ask....
In the htc rom tool do I leave all fields blank except for the splash screen entry? And where do I enter that? I assume that I type splash.nb into the splash1 field.
Else, do I fill in all of the fields such as country ID, version, IPL?
many thanks.
karlo
one more question. does this flash delete my current tytn's settings (do i need to flash splash screens after hard reset or anytime)?
re
Is there a way to make a .cab file to change the bootsplash image? Also i see some custom roms have a 3d intro (maybe flash?) how would i go about doing this?
Thanks
thanks a lot man
To change Splash Boot screen, made a picture 320x320 pixel 96dpi save it in .png and rename in welcomehead.96.png
Use Resco Explorer, copy, paste and replace the welcomehead.96.png in folder Windows, make a soft reset.
So, this will be the correct tool to use to format images for the Titan?
Splash Screen Collection....
panosha said:
To change Splash Boot screen, made a picture 320x320 pixel 96dpi save it in .png and rename in welcomehead.96.png
Use Resco Explorer, copy, paste and replace the welcomehead.96.png in folder Windows, make a soft reset.
Click to expand...
Click to collapse
May be WE can all put some more Splash Screen, so we will have a collection eventually...
Just a thought
Nadavi..
great idea
Nadavi said:
May be WE can all put some more Splash Screen, so we will have a collection eventually...
Just a thought
Nadavi..
Click to expand...
Click to collapse
Great Idea mate we should start a thread based on all custom splash screens who knows the cooks might even used some of them soon.
????????
How do you run bmp converter? Not work for me!
I get 240 file eroor when trying to flash it to my tytn2.
Optical Illusion Splash Screens
Some optical illusions:
Animated?
Since the image is in .png format is it safe to assume that we can NOT load an animated splash screen??.. Also does flashing via the steps in the first post accomplishes the same as replacing the welcomhead.96.png manually??
Thank you..
jadehawk: you are correct that the welcomehead.96.png is non-animated, if you create an animated .gif and rename it to .png it may work in some programs that read inside the file for the relevant code to know how to display it but most programs including the wm6 bootup hook will not display it how it should so don't bother
Just to clarify that the original post by pof is "THE ONLY WAY" at present to replace the splash screen on initial boot of the phone, the welcomehead.96.png usage is on windows boot (some people have a 3rd animated .gif in between the 2, but this doesn't work on all models even with the registry entries in place, i have tried on my T-Mobile).
hope that helps.
Russ
Thank you
Great thank you for clearing that out.. for now I am just happy replacing the animated.gif file in the windows folder with something other than the HTC animated one.. I have tried to make my own ROM using the kaiser kitchen but so far It has never worked at least not like the really simple tutorials I have found here.. still waiting for a better tutorial with screenshots and all.. so far i will stick with the ones I get from here and use the sprite backup to restore the applications I want loaded in the ROM.. thank you
Hey
when i try to instal
the 3 files u said
a window pops up & says
not a wm appliction
can u help
pof said:
Instructions for flashing custom splash screens on HTC Kaiser:
1. Install HardSPL.
2. Create a BMP file in paint, size must be 240x320, save it as BMP 24bit.
3. Download SplashTool
4. Load your BMP on nb_image_converter (included in SplashTool's zip) and save it as splash.nb
5. Open SplashTool.exe and convert splash.nb to new format.
6. Pack the resulting splash.nb into a NBH file using htc rom tool.
7. Flash your cusotm NBH using CustomRUU.
Enjoy your new splash screen!
Click to expand...
Click to collapse
freeborock said:
How do you run bmp converter? Not work for me!
Click to expand...
Click to collapse
find the missing ocx file (windows search) and put it in the same folder
Deathace said:
jadehawk: you are correct that the welcomehead.96.png is non-animated, if you create an animated .gif and rename it to .png it may work in some programs that read inside the file for the relevant code to know how to display it but most programs including the wm6 bootup hook will not display it how it should so don't bother
Just to clarify that the original post by pof is "THE ONLY WAY" at present to replace the splash screen on initial boot of the phone, the welcomehead.96.png usage is on windows boot (some people have a 3rd animated .gif in between the 2, but this doesn't work on all models even with the registry entries in place, i have tried on my T-Mobile).
hope that helps.
Russ
Click to expand...
Click to collapse
thank you for your help
Thank you very much. i put my business card on the splash screen. phone is well protected now
thank you again
anyone care to share their customize splash screen?
Btw, this is where I got the ability to cook my splash screen on my ROMs. You know the first bootscreen.
Here.
I don't speak Vietnamese, but it's pretty easy to figure out. If you don't understand me, tell me and I'll write a walkthrough. The pictures tell it all, though.
EDIT:
Things you need:
-Thay Doi_SplashScreen.
-NBH_Tool_v1.1.
-HTC_ROM_Tool.
Create a BMP or JPG that's 240x320.
Run Chạy Tool Replace SplashScreen.exe
Click Load Bitmap and choose your file.
Click Update Splash.
It will create the needed files where the BMP/JPG is currently stored.
Take the ruu_signed.nbh and use NBH_Tool_v1.1 to extract the PrimarySplash.nb that you can use with your ROM.
you should probably type it up anyway. hah
Thanks for the link, Ivan
Can someone upload the files, I cant read the site so I cant make a log in lol.
Thx
Write up
Hi,
I will try to write this up today as time allows.
How-To
As promised, please download the attached zip file.
This will contain all needed files and a short readme.txt.
Enjoy,
ttran001 said:
As promised, please download the attached zip file.
This will contain all needed files and a short readme.txt.
Enjoy,
Click to expand...
Click to collapse
Thanks Ttran!! I knew someone would step in and help me in my time of laziness.
Dumb Question
Okay, this is probably a dumb question.
I followed your instructions to the letter -- got the PrimarySplash.nb file.
My questions is Now what do I do to flash it to the phone. Go back to step 1?
Please Advise
Thanks
zcink said:
Okay, this is probably a dumb question.
I followed your instructions to the letter -- got the PrimarySplash.nb file.
My questions is Now what do I do to flash it to the phone. Go back to step 1?
Please Advise
Thanks
Click to expand...
Click to collapse
lol,
Now that's going to be another post... How to install your newly created splash screen.
=============================
Download
This file will contain step on how to create a nbh file. Just follow the steps and only include your PrimarySplash.nb file and not the rom.
Then flash it as you would with a rom.
Good luck,
ttran001 said:
lol,
Now that's going to be another post... How to install your newly created splash screen.
=============================
Download
This file will contain step on how to create a nbh file. Just follow the steps and only include your PrimarySplash.nb file and not the rom.
Then flash it as you would with a rom.
Good luck,
Click to expand...
Click to collapse
Okay got it. Will try it. Thanks.
by the way, thanks so much for using Megaupload and Not Rapidshare. Megaupload is by far the best.
I'm nervous about doing this but here goes.
Just one question. I put the PrimarySplash.nb in splash box and not system box -- right?
Please advise.
thanks. (I just don't want to brick my phone.)
Got it -- worked. You are a Genius.
Okay I did what I thought and it worked great. Thanks again!!!!!
yay for viets! (sorry gotta represent)
found this...not sure if you can do anything with it
neptune said:
found this...not sure if you can do anything with it
Click to expand...
Click to collapse
Haven't tested that, but it's probably for one of the other two startups. The first startup cannot be changed without flashing.
neptune said:
found this...not sure if you can do anything with it
Click to expand...
Click to collapse
Be nice if you could tweak this. Says ROM by Tom Condron. Nice graffics though. Uninstalled.
tried it out, got the nb, converted to nbh, flashed with the loader that came with ivans clean rom, but it didnt work. Nothing happened. Any ideas?
chris30_2001 said:
tried it out, got the nb, converted to nbh, flashed with the loader that came with ivans clean rom, but it didnt work. Nothing happened. Any ideas?
Click to expand...
Click to collapse
did you make the picture that you want for the flash screen ? Did you download the easy how to as well ???
Ok I am no noob .. Maybe im too tired or I missed something somewhere in all of this. So let me ask all the dumb questions and hopefully you can make this a sticky clearly explained. Lets start will all the directions 1 by 1 and hopefully 1 of you geniuses can clean it up then hopefully make a sticky .....
A.) Download all files needed. (assistance is more than welcomed here)
B.) get the picture you want to use for your splash screen.
(**Instructions written by ttran001**)
1. Copy the image you would like to use into the image folder.
2. Open up the Step 1 folder and run the Replace SplashScreen.exe file.
3. Click on Load Bitmap from the newly opened menu (Replace Artemis SPlashScreen.
4. Click on the Update Splash button.
The PDA Phone ROM Update Utility 3.0.3.1 menu will pop up.
Leave it alone.
5. Go back to the image folder for step 1 and locate the RUU_signed.nbh file.
6. Copy the RUU_singed.nbh and place it into the RUU_signed folder.
7. Go back and close out both PDA Phone ROM Update Utility 3.0.3.1 and Replace Artemis SplashScreen.
8. Now go to the step 2 folder and double click on the nbhtool.exe.
9.This will open up Dutty's good NBH tool v1.1.
10. Click on the Decompile NBH file button.
11. Browse back to the RUU_singed folder and locate the new RUU_signed.nbh file.
12. Choose the same location or the one of your choosing to save the extract files.
13. Once completed it will extract a new file called PrimarySplash.nb, this is your new Splash replacement file.
OK we now have that part as easy as can be. Now the next parts for creating a nbh file.
Download and extract the HTC_ROM_Tool to your computer.
Double click on the htcrt.exe file to get started.
This new screen will popup.
Click on the Build! button.
On this screen click on the box under the Device: to select your device type.
Choose Herald
Type in your version of the rom, example: 4.10.531.3
Click on the box highlighted in red to choose your OS.nb file.
( Now where do we get this file from i would like that clarified and have it added to a download list for the sticky please.)
Click on the Build ROM botton.
This new screen will popup.
OK ... Now we have a nbh file... Now what would be the correct way of flashing this to a device. also the basic questions.
1.) Will this delete and or change my settings. ?
2.) What are the risks of flashing this way ?
3.) Does this work with HardSPL ?
4.) Does this work without HardSPL ?
5.) Must the picture be a bitmap ?
6.) Can I just use the ReplaceSplashScreen to just change the splash screen ?
7.) Does the program ReplaceSplashScreen work on wing before HardSPL or after or both ?
8.) Maybe im really tired how do I put pictures in this thread ... LOL ...
If I want to change the Windows Mobile splash also, do I change the name from "PrimarySplash" to "Secondary Splash"? or something? thanks.
I am looking for the stock TD2 splash/welcome screen, It is the silver TD2 words on black background.
I have tried looking all over the internet but can't seem to find one.
cyberdroxxx said:
I am looking for the stock TD2 splash/welcome screen, It is the silver TD2 words on black background.
I have tried looking all over the internet but can't seem to find one.
Click to expand...
Click to collapse
I only have it for the welcome head..the stock splash is dependant on your firmware 6.1 or 6.5..custom rom or stock rom.
Thank you wez89.
I am thinking how can I convert this into splash screen or .CAB file to install it in my TD2. Which RUU should I use if it needs to? Do I have to HSPL?
I have upgraded my stock ROM to 2.53.707.4 (76952) WWE. Stock SPL 2.51.
Where can I find Stock SPL 2.51 if I want to re-flash it again?
cyberdroxxx said:
Thank you wez89.
I am thinking how can I convert this into splash screen or .CAB file to install it in my TD2. Which RUU should I use if it needs to? Do I have to HSPL?
I have upgraded my stock ROM to 2.53.707.4 (76952) WWE. Stock SPL 2.51.
Where can I find Stock SPL 2.51 if I want to re-flash it again?
Click to expand...
Click to collapse
For the initial boot screen, you have to flash with RUU.
Process is .bmp=> .nb => .nbh => flash w/ Topaz RUU.exe
You would need HSPL, the stock 2.51 should be availble now in the HSPL thread.
Bruce Inman said:
For the initial boot screen, you have to flash with RUU.
Process is .bmp=> .nb => .nbh => flash w/ Topaz RUU.exe
You would need HSPL, the stock 2.51 should be availble now in the HSPL thread.
Click to expand...
Click to collapse
I would like also to change the first rom boot screen and found here; http://forum.xda-developers.com/showthread.php?t=431161
the tools to convert the bmp=> .nb => .nbh.
BUT this tools is for VGA devices (640x480) like can see on NBHUtil
Please, do you know any link where i can find maybe something more updated?
Here's what you need to do.
1. Find any picture and change it to 480x800 24 bit.bmp and rename it to 1.bmp. Right click on properties and make sure the file size is 1,152,054 bits (very important)
2. Download Splash.zip and extract to where ever you like.
3. Place 1.bmp into the same folder.
4. Run Go.bat (this converts the .bmp to .nbh) and follow prompts (let it complete the conversion)
5. You have now created a new 1.nbh file which you can rename to anything you like
6. From here you can flash the .nbh file just like a ROM .nbh;
a. Rename to TOPAIMG.nbh and place file in the root of your storage card and flash from Bootloader or....
b. Copy Topaz RUU and .nbh file to their own folder. sync your phone to your PC and run the RUU.exe.
ENJOY!
**Notes: MAKE SURE YOU HAVE INSTALLED HSPL FIRST!!!
This will not wipe your device data.
This covers the bottom 100 pixels(issue on previous versions)
I am not responsible for damages, but have tested and flashed to verify it works.
...and no I can't make it into a cab file for you...
McRIP said:
I would like also to change the first rom boot screen and found here; http://forum.xda-developers.com/showthread.php?t=431161
the tools to convert the bmp=> .nb => .nbh.
BUT this tools is for VGA devices (640x480) like can see on NBHUtil
Please, do you know any link where i can find maybe something more updated?
Click to expand...
Click to collapse
I created yours for you.
Just follow flashing instructions.
Bruce Inman said:
Here's what you need to do.
1. Find any picture and change it to 480x800 24 bit.bmp and rename it to 1.bmp. Right click on properties and make sure the file size is 1,152,054 bits (very important)
2. Download Splash.zip and extract to where ever you like.
3. Place 1.bmp into the same folder.
4. Run Go.bat (this converts the .bmp to .nbh) and follow prompts (let it complete the conversion)
5. You have now created a new 1.nbh file which you can rename to anything you like
6. From here you can flash the .nbh file just like a ROM .nbh;
a. Place the .nbh file in the root of your storage card and flash from Bootloader or....
b. Copy Topaz RUU and .nbh file to their own folder. sync your phone to your PC and run the RUU.exe.
ENJOY!
**Notes: MAKE SURE YOU HAVE INSTALLED HSPL FIRST!!!
This will not wipe your device data.
This covers the bottom 100 pixels(issue on previous versions)
I am not responsible for damages, but have tested and flashed to verify it works.
...and no I can't make it into a cab file for you...
Click to expand...
Click to collapse
WOW! Mr. Bruce Inman thanks for this answer.
i ask for a glass of water and you give champaign
Bruce Inman said:
I created yours for you.
Just following flashing instructions.
Click to expand...
Click to collapse
thats very kind, thanks again.
Glad I could help.
Great work
Bruce Inman said:
Here's what you need to do.
1. Find any picture and change it to 480x800 24 bit.bmp and rename it to 1.bmp. Right click on properties and make sure the file size is 1,152,054 bits (very important)
Click to expand...
Click to collapse
how to make a file with exactly this size ?
Edit: Solved it was my error !!