SPB Pocket Plus - JAMin, XDA Neo, S200 Software Upgrading

I upgraded my S200 to PDAMobiz AKU3.2. But now my pda hangs when I soft reset it after SPB Pocket Plus installation, and I cant solve this problem.
Any had this problem?
Any tips or solutions?
Thanks in advance.

It's mentioned here,http://forum.xda-developers.com/showthread.php?t=282526
And,It sounds like no solution.
sorry for my bad Engilsh.

SPB pocket plus does not work with aku 3.2... I have the same problem... works fine with aku 2.3...

I have a Universal with Ivan´s beta 14, wich i believe is AKU3.2, and spb pocketplus is working fine... or maybe this is a issue only with prophet.

vmiguel said:
I have a Universal with Ivan´s beta 14, wich i believe is AKU3.2, and spb pocketplus is working fine... or maybe this is a issue only with prophet.
Click to expand...
Click to collapse
i does not work with 3.2 wizard either.

Ok i also had the problem with pocket plus and found a fix.
You need to deactivate the Safe Mode from pocket plus for it to work fine after reboot

SPB PocketPlus 3.1.2
matthieup said:
You need to deactivate the Safe Mode from pocket plus for it to work fine after reboot
Click to expand...
Click to collapse
In my case it is not even installing. After ActiveSync sends the CAB to my MDA and I select MAIN MEMORY, as opposed to Storage Card, it quits a few seconds and says the installation was unsuccessful...
In the other hand, if I select STORAGE CARD, the installer complains that it may not work because the storage card service may start up later than the call for the application I am installing.
Any recommendations?
-Feaps

Related

Tom Tom 5 Probs on Win Mobile 2005

OK my tomtom5 works fine with Win Mobile 2003, I just put the SD Card in and it auto installs. With Win Mobile 2005 I put the card in and the setup exits after 2 secs.
Is there a way round this???
Many Thanks
tomtom 5 officially doesnt support wm2005 yet so it cant be garueteed to work
There is an easy fix for this problem, use file explorer on your pda to open the "2577" folder on the storage card an then run each of the four cab files one after the other. Tomtom is then installed and working great.
in my WM2005 device (XDAII), TomTom works but the screen stays dark all the time, everythingn else works ok. It takes a soft reset to fix it, anyone else have same problem or know a fix?
Martin
in my WM2005 device (XDAII), TomTom works but the screen stays dark all the time, everythingn else works ok. It takes a soft reset to fix it, anyone else have same problem or know a fix?
Martin
in my WM2005 device (XDAII), TomTom works but the screen stays dark all the time, everythingn else works ok. It takes a soft reset to fix it, anyone else have same problem or know a fix?
Martin
http://forum.xda-developers.com/viewtopic.php?t=24048&highlight=

Slow input method change..

Hi guys, i've got a problem when i try to change input method on my xda neo, it appears the list after i tap the arrow for bout 5sec, few days ago the list just came up as soon as i tap the arrow..
can any1 tell me how to fix it?
waitin for help..
zerocul said:
Hi guys, i've got a problem when i try to change input method on my xda neo, it appears the list after i tap the arrow for bout 5sec, few days ago the list just came up as soon as i tap the arrow..
can any1 tell me how to fix it?
waitin for help..
Click to expand...
Click to collapse
This is normal
well, base on 3 years use of windows mobile, i dont think this is normal, and it worked fine few days ago, all i want is to get back to normal state.. how irritating is it if u wanna change an input method but u have to wait 5 to 7 sec everytime..
zerocul said:
well, base on 3 years use of windows mobile, i dont think this is normal, and it worked fine few days ago, all i want is to get back to normal state.. how irritating is it if u wanna change an input method but u have to wait 5 to 7 sec everytime..
Click to expand...
Click to collapse
According to my 4years experience of using windows mobile. It is normal.
according to my 1day expriences
just backup your registry and restore
u will see it working as normal as master reset perform
this is due to third party software that cause it slow down
too much SIP on your pda
One of these 3rd party softwares that cause SIP change to slow down on WM5 is Microsoft Voice Command. Backing up and restoring the registry usually fixes this problem, but in some cases the actual 3rd party software that caused the problem would not work well after the registry restore.
On the Dopod 2.15 ROM with SPB Mobile Shell, TCPMP and Resco Media Suite installed, the SIP menu pops up as soon as I hit the arrow
Yes, MS Voice command is the main culprit. So, I do a full reg backup before I install it, and then restore it immediately after.
This is because MVC ver 1.5 does not officially support WM5. MVC 1.6 does not have this issue on WM6 Crossbow.
scott4 said:
According to my 4years experience of using windows mobile. It is normal.
Click to expand...
Click to collapse
well, you'll enjoy it even better when you'll get a *normal* device
I traced this to voice command 1.5 way back. Waited for a year for 1.6 to come out.. had to pay another $10 for the upgrade!! grrr.
And it still didn't fix it.
I'm planning to wipe and reinstall everything soon so it might be ok then.
It's definitely not normal.
I agree, this is not normal.
The pop-up menu should be instantaneous.
After installing Resco Keyboard and Voice Command the menu became slow to appear.
Both are now uninstalled but the problem remains.
Must be something wrong in the registry.
lastnikita said:
well, you'll enjoy it even better when you'll get a *normal* device
Click to expand...
Click to collapse
lastnikita, i agree with u.. scott4, mayb yr device is alr abnormal in the first place, that's y u don't find the slow input change abnormal, and it's very lonely to use such device for 4 years.
By the way guys, I've just updated wm6 2 days ago, initially the input method change worked fine, bt after i installed CE-Star and phone pad, not immediately,about a day l8r,it starts to get slow just as what happened to me with wm5. I did the backup and restoration as Tabbe mentioned, it did helped, reduce to about 1.5 sec.
And the Ms Voice Command with wm6 is v1.6, so i don't really think it's MVC's problem (correct me if i'm wrong).
What's strange is, (when i was using wm5), after i installed ce-star(phonepad's alr there) the input method didnt slow down at all. The only thing i remember before it started to get slow is, i installed mem-maid, and i did a clean up, including bad reg, after that, it got slow.. so could it be some reg issue that contribute to the problem?

TyTN II does not sync anymore.

When I plug my TyTN II to my laptop or pc, The active sync icon starts to lookup, but after 1/2 minits i get screen that it was failed to connect. I have this problem since trying WM5Storage. Does someone know how to fix it?? Cause I want to upgrade to dutty's newest rom.
Ps. It does sync with my exchange server but not local with a pc or laptop.
You should check if WM5 Storage is activate (left soft key in the program screen), if yes you should deactivate before connecting with ActiveSync.
I don't know if you have to restart the device, probably yes...
Ciao.
Ensure that usb advance connection tab is unchecked in connection settings,
also you can sync when using wm5torage so you have to disable probably have to restart both computer and device.
If it doesnt work un-install mobile device centre and re-install again, ensure you back up your pims first.
See if it works.
It seems wm5torage mess something up in your connections
let me know if those works
Dear Sir
This is the fastest rom I have ever had in Kasier, whilst the Xt9 did not work but I have deleted it. I noted no issues from the functions I used to use.
Good work!!
leochan2005 said:
Dear Sir
This is the fastest rom I have ever had in Kasier, whilst the Xt9 did not work but I have deleted it. I noted no issues from the functions I used to use.
Good work!!
Click to expand...
Click to collapse
My friend told me I had a much faster rom in november and nothing compares to it
adreyanholley said:
I know this has nothing to do with the topic but Dutty could you make a rom for the Hermes because I love the roms but are not able to use them?
Click to expand...
Click to collapse
There are lots of great rom in the hermes forums, Maybe in he new years I havent got a hermes but I might do one for old time sakes. fingers crossed
I too am having problems sync'ing my Tilt. When I go to uncheck the "advanced network functionalilty" in USB to PC, I get "Failed to disable RNDIS to use Serial"
Please help!
I found an answer after googling "Failed to disable RNDIS to use Serial", where someone mentions a bluetooth COM entry they found and deleted that solved it.
So, I look, find a COM entry from when I was playing with my (old) bluetooth GPS, deleted it, and now I'm able to uncheck the setting.
Now to see if I can finially sync with my PC...
Nope, can't establish a connection with my PC! I'm running Active Sync 4.5 on XP. I tried on Vista, only to learn that wont frigging work either. Any ideas?!
Yankee802 said:
Nope, can't establish a connection with my PC! I'm running Active Sync 4.5 on XP. I tried on Vista, only to learn that wont frigging work either. Any ideas?!
Click to expand...
Click to collapse
I am also having trouble with Vista...But I am able to have my Tilt Sync on Windows XP. I think I might have an issue just with Vista but it appears that yours may be phone related. Have you tried a hardreset on your device?
alltheway said:
I am also having trouble with Vista...But I am able to have my Tilt Sync on Windows XP. I think I might have an issue just with Vista but it appears that yours may be phone related. Have you tried a hardreset on your device?
Click to expand...
Click to collapse
I have this problem in XP, windows server 2003, vista. Also on diffrent computers + laptops.
Yankee802 said:
Nope, can't establish a connection with my PC! I'm running Active Sync 4.5 on XP. I tried on Vista, only to learn that wont frigging work either. Any ideas?!
Click to expand...
Click to collapse
Did you find a fix yet?
Nope, I realy don't want to do a hard reset, but might friggin have to.
I was hoping to find another soloution.
I will say this, last time I was able to sync anything, it was my 8525 before I flashed a WM6 ROM, but I know it's not a WM6 - XP compatability issue, others here have no problems. I know Vista has issues, so I'm not even worried about that right now. My Tilt still has the factory ROM, and still others have the same setup with no problems. I can't tell you how mad I'll be if I do a hard reset and it still doesn't work!
Would be nice to be able to copy the pim.vol to/from the memory card and have Outlook be able to import the databases from it.
im having same issue with wm6 ever since flash but wing and mda still sync running wm5 think its some sort of hardware issue havent been able to find anything on it though if you figure it out please post..... by the way i tried hard reset didnt work
HTC TYTN - Not Synching
Hi all,
I have HTC TyTn, which was syncing fine with my laptop. recently it stopped synching. i thought it could be an issue because of the my OS. i have reinstalled my PC OS and it still doesnt work.
any solutions to make it work without hardreset as i have got a bit of data on it to save before i do anything with it.
SFProphecy said:
Hi all,
I have HTC TyTn, which was syncing fine with my laptop. recently it stopped synching. i thought it could be an issue because of the my OS. i have reinstalled my PC OS and it still doesnt work.
any solutions to make it work without hardreset as i have got a bit of data on it to save before i do anything with it.
Click to expand...
Click to collapse
Dunno, I had never witnised this problem. Always had synced with all my devicec. Try the HTC helpdesk and if they can't help you they will tell you a hard reset aswell
Unable to sync using USB...
When I sync using Bluetooth, all is fine & dandy. BUT. When I plug my Tytn II (MDA Vario III) into my USB port, it starts installing a new "Windows Mobile Remote Adapter" (I run Vista, with Vista SP1, BTW). This fails, with a message "The required registry key is missing"? I have tried removing any trace of Windows Mobile Device Center, reinstalling that, installed the MS driver update, no joy. Obviously,Vista being a Microsoft OS, it doesn't tell me WHAT THAT bloody registry key is/is suposed to be!!! Help?

GPS Software "Destinator" not working..

Hi All,
I have installed Destinator 6/7 (both versions) many times and it worls for 1-2times and then it stops at the first screen and today screen pops up again. The top status bar is destinator but lower half is today screen.
I even flashed my Wizard many times with diffrent flavours of WM 5 and 6. It works hardly once or twice then same problem.
Everytime I hard reset it, it works 1 time and then again the problem is shown.
Has anyone has managed to make any version of destinator to work (either 6 or 7) on any WM??? Does anyone have the same problem with me???
Thanks in advance.
Working on WIZA200
IPL=2.26
SPL=2.26
GSM=2.25.11
OS=2.26.10.2 (using a WM5 ROM)
Hi,
With destinator 6 I never had any problems.
It was working with WM5 and with WM6.
Sometimes I had to stop all other programs to get more free memory.
Did you test this already?
Hi,
I've been using Destinator 6 without any issues on my K-jam. I suggest you to uninstall everything except maps on SD. Then, install it again on the main memory. Also, surf on the Destinator technology site if there's an upgrade or something to your country.
Wish you luck!
Cheers!
hi, i had the same problem that you have now, but only with wm6,
i find out that when i hard reset my device or upgrade a new rom i allways backuped all my pim data using pimbackup 2.5.
then after the upgrade i restored all my pim info, and then the problem with destinator 6 or 7 begins.
the solution for me was that when i backuped my pim data i unchecked an option in the pimbackup called ""binary backup"", then after that, when i restore the pim data ,destinator works fine.
so, are you restoring your personal data using pimbackup?
if so, maybe this is the solution
by the way, i am using a prophet
Thanks for your replies..
Today I re-installed TNT.1933_Prof_HTC ROM and increased pool size to 12 MB. Right now the memory stats are:
Storage Memory Free = 38.8 MB
Program Memory Free = 18.2 MB
Destinator and Maps both are installed on the Storage Card (2 GB) with 200 MB free space. This made it to work for 2 times and again it stopped.
Also, I realized that the program actually crashes as there is no entry of the program in the task manager.
So this has rather become a crash issue with Destinator.
Any insight will be very much apreciated...
And, I use a Bluetooth based GPS receiver.
Thanks.
I don't think it is a memory issue. As detailed in the last post it has some 16 MB of mem free.
joesa: Yes, I also use PIM Backup to restore my Emails/SMS. Do you think that is causing the problem. I'll try to disable the bin backup while restoring.
Thank you for the clue.
I don't know V7.0 but I think it should be very similar than V6. I insist you to install the core app into the main memory and just leave all maps on SD. Then, you can hard reset many times without having to install maps again. I'm telling you exactly what my local support said at the time I faced installation issues with V6.
Good luck btw....
This indeed was a crash issue due to unwanted binaries. Thanks joesa for that clue. After disabling that binary option in PIMBackup the problem disappeared. Destinator is working Fine on my Wizard (Both program and maps on SD).
Thanks a lot for sharing your experiences.
singhravi437 said:
This indeed was a crash issue due to unwanted binaries. Thanks joesa for that clue. After disabling that binary option in PIMBackup the problem disappeared. Destinator is working Fine on my Wizard (Both program and maps on SD).
Thanks a lot for sharing your experiences.
Click to expand...
Click to collapse
Your wellcome, glad i could help!!!!
i think so after open and close Destinator 7 he don´t close the speeks after open again, no sound is avaliable, need soft resset for work again.
Only in destinator 7 i detect this, in destinator 6 works fine.
joesa said:
hi, i had the same problem that you have now, but only with wm6,
i find out that when i hard reset my device or upgrade a new rom i allways backuped all my pim data using pimbackup 2.5.
then after the upgrade i restored all my pim info, and then the problem with destinator 6 or 7 begins.
the solution for me was that when i backuped my pim data i unchecked an option in the pimbackup called ""binary backup"", then after that, when i restore the pim data ,destinator works fine.
so, are you restoring your personal data using pimbackup?
if so, maybe this is the solution
by the way, i am using a prophet
Click to expand...
Click to collapse
Ok, but is there a solution for us, who do not want to do a hard reset?
I just reinstalled everything on Thursday, can't do it again
Maybe backup and restore PIM without hard reseting, and with unchecked binary setting? Would this work?
cmavr8 said:
Ok, but is there a solution for us, who do not want to do a hard reset?
I just reinstalled everything on Thursday, can't do it again
Maybe backup and restore PIM without hard reseting, and with unchecked binary setting? Would this work?
Click to expand...
Click to collapse
i'm afraid that if you don't have a previus rom backup(sprite, spbbackup), before using pimbackup, you would have to hard reset, i never was able to make it work after restoring my pim data with pimbackup(binary)
5thWheel said:
I'm having this problem without doing anything to my PIM. It seemed to start arbitrarily. Is the restore of PIM modifying some files somewhere in a manner that Destinator doesn't like? If so, which files? Maybe mine got modified by some other app and if I delete/manually alter them I can get it going again?
Click to expand...
Click to collapse
it took me a lot of time to find out that pimbackup(binary) was the program that screwed destinator(guess it has something to do with databases), what i did to find the program was:
hard reset, install destinator and tried, install next of my needed program and tried destinator, install next program and tried, and so untill i found wich program screws destinator,
sorry i can't help
good to hear that !!!!!!
Would Activesync contribute with the crash?
I haven't any pim backup in my TYTN II and hard reseting the ppc every week is complicated.
Think I'll stop using Destinator.
Problem stills...
Any news????
I have an htc touch pro and installed destinator 7. It worked well for a few days and then suddenly refused to load. It crashed at the start screen. After a lot of experimenting I found the solution. I deleted all my sms-mms contents and then destinator was working again! I believe that certain characters from sms's are the cause, since destinator has a built in facility to send an sms. It's annoying though since each time you have a crash you need to remove your sms contents.
kospan - you're my man due to having the same issue i tried ypour solution and - that's it!!! i'm glad to tell you and all those who having this problem, too, that it's only the MMS - if you delete only all stored mms then it will work fine again too
I'm glad I could help! So only MMS? I guess that is good news because I will be able to keep my sms, which are far more than the mms.
need to delete both SMS/MMS
In my diamond, i had to delete both the SMS/MMS to make the destinator work.
Thank you guys for your support.

WM5torage corrupts Active Sync

Using an o2 xda atom, ived experienced this before still i don't learn. well this is what happened. I went to my friends place and he has a spare laptop with no internet connection. My battery was almost dead. (i really need to charge my PPC). without active sync installed on the laptop, sync wont work -- mean i can't charge. so then i switch to usb mode with WMstorage had issues with a couple of tries, 5 times i think then after a reboot from the laptop and the ppc, *poof* the red led went on meaning its charging. Now I just got home, trying to sync my ppc to my desktop. I get a device needed installation, i traced the driver located in the active sync folder, to my luck. it doesnt do anything.
well i was looking forward for a workaround or something.
Atom specs: PDAVIET ROM 6.10 CE OS 5.2.20764(build 20764.1.4.3PV)
WM5torage version: v1.8
Uninstall
Hi
I had the same problem. I uninstalled WM5torage and it worked again. A good hint is to always take a good back up of your device configuration before installing any software so that if the worst comes to the worst you can just go back to your previous config. Sprite Backup is good for this.
Cheers
andrew-in-woking
andrew-in-woking said:
Hi
I had the same problem. I uninstalled WM5torage and it worked again. A good hint is to always take a good back up of your device configuration before installing any software so that if the worst comes to the worst you can just go back to your previous config. Sprite Backup is good for this.
Cheers
andrew-in-woking
Click to expand...
Click to collapse
Hi,
I don't think i can do that. wm5storage was bundled in the rom im using any other work around.
anyone? help..

Categories

Resources