Database Info

VOIP software hangs phone

Hi,
I bought the Excalibur and the Vox 'cause I though it would have been great being able to place VOIP calls from my phone, using the same setup I use with my ATA.
The files to enable VOIP and MS phones have been circulating since a while, but even though I tried couple of packages I still have some issues.
The problem I have is that, for some strange reason, when the VOIP cab is installed my phone sometimes loses "Calling and receiving" capability.
Sometimes I trie to place a phone call and the phone hangs, I can only switch it off and on again. Sometimes I even have to remove the SD card otherwise it will keep doing a Reboot Loop.
Other times I receive an SMS for a missed call, as if I had been offline. When I then try to call back my phone hangs.
This bug seems to affect only the Calls and not the SMS functionality.
Has anybody experienced the same issue?
Thanks,
Ka.

I also have the same problems except for the SD rebooting.
I installed the VOIP client from the workarround posted here and I also experience the same problems:
1) phone seems to work fine until I decide to place a call, when I finish entering the numbers and I hit the Call button, the phone does nothing (not even the beep) and from that point I know that I can't place calls (dial pad doesn't even works on home screen). I have to reboot.
2) I receive SMS from missed incoming calls. If I call my S710 from another phone I get a calling tone and then the answering service, but the S710 does nothing.
I had email accounts configured and I thought this problem was from GPRS not letting GSM calls come in (as it says in other threads) but now I have no active email accounts, no GPRS traffic and it is ever worst (3 to 4 reboots a day!)
I honestly don't remember this problem before VOIP client installed.
Anyone has this simptoms???

I do have the same probs
Probably others aren't experiencing the same because they disable the VOIP when no Wifi is available. I'll try to reinstall the VOIP Cab and try that way.
Bought the S710 for it's VOIP cababilities and possibility to hook it to my PBX and finally feel the freedom of VOIP (Ok, bit exagerating but you get my point ).
Anyway, since we're two at the moment, promised to keep you posted.
Thanks for your help.
Ka.

kast did you improve your VoIP configuration tool? I once tried it, but it never worked. I gave you feedback in another thread but never heard of you

same probs too

jockyw2001 said:
kast did you improve your VoIP configuration tool? I once tried it, but it never worked. I gave you feedback in another thread but never heard of you
Click to expand...
Click to collapse
Hi there,
sorry for taking so much time. Actually been quite busy lately and well, ok, must admin left this VOIP thing a bit aside.
Anyway, would you mind trying this version, hope it will work a bit better.
Tested with the provider you sent me and it seems to work.
(This is not a Cab Install thing, been packed up in couple of minutes, please unzip it and run it from your mobile.)
I think I'll get back to this so stay tuned for some little enhancements.
Ka.

COOOL.....Works on my modded Tornado with wm06...great!!!!Thanks!!!!

Hello Kast,
After my last post, I unistalled the VOIP software from within the phone's start>Settings>Remove Programs>Sleuth's WM6VoIP
I got this message "Sleuth's WM6VoIP was not completly removed. Do you want to remove it from the list of installed programs?", I didn't remove it.
I then changed the Settings>phone>Internet Calling>"Use Internet Calling" to "Never".
Since then I haven't experienced any troubles at all and I haven't rebooted the phone for some days now! problem solved but no VoIP!
I'll try your VoIP files and see what happends.
Cheers
P.S. My setting for VoIP was "whenever available" but i had WiFi off 99% of the day. (some days even 100%).

Issues with Alpha Wm6 Rom

hilo,
Just created a new thread for this as its issues are pilling up the other one. i think that thread should be clean and should have only and only contain info about progress on the wm6 rom...
Mods if unnecessary please delete...
Tejas

I would not call it a bug but one of the disadvantages of the ROM is that, similar to these ones which come to Qtek and i-mate, it does not recognise the network settings out of the box but you have to fiddle with them manually. When I use Orange ROMs (and it does not matter if the ROM comes from the UK or Switzerland) everything works with flying colours, despite I do not use any Orange network. Just I have to install Opera Mobile (I hate pocket IE) and voila! Everything works!

Channels don't work.

in india AFAIK channels just provide the cell id i.e the area which i m in... not imp though... no use of channels

ok phil.
if u remove windows update, at least supply it as a cab in the extras folder.
channels don't work.
long pressed side button does not work! it used to start voice note record for the sda and i'd like that to work.
mms.
better camera software. btw htc camera makes the phone SLOW..... not a good one. need an alternate
enable profile switching to silent when long pressing '#' key
default folder for saving pictures on storage card is not my documents\my pictures any more but a lame dcim folder. that would be nice to be changed.
also, sometimes when answering a call, the keyboard stays locked, the call is still on, but the home screen is active and not the call screen.
joystick seems much better but sometimes it doesn't want to work as it should. maybe another driver; if not, this one is good
we need wpa2 for wifi enabled.
also add in the extras folder:
moblue
tcpmp with extra codecs
htc audio manager could be good
if u need the cabs for moblue and htc audio, i have them
there is an newer version of sim manager. v6.10. has a couple of new things (got it if u need it)
and maybe add a good version of opera. not the java one.
we also need a good midlet manager
also a good instant messaging program. maybe a multi client one like oz mobile im, or like im+

mmmhhh after read all this bugs, i better wait a while to update my phone, i find a good idea to write here all the problems with the actually ROM.

Good AD2P drivers
Hi,
Is it possible to have good ad2p drivers with the next rom?

Tomtom 6
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards

I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.

boneym said:
I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.
Click to expand...
Click to collapse
Actually I would split your post in two separate ones.
1. the instability of WM6 Alpha - obvious thing, and it should be fixed
2. but I also see something else. I see from many posts that one application which sets all the settings with one click is quite urgently needed. I know that something like that exists for Swiss networks http://www.mysmartphone.ch/Freeware/kommunikation/16920.aspx and for the Norwegian ones http://www.smartmobil.no/Article617.phtml but I think that everybody would agree that such an universal solution would be something good. Unfortunately, I do not know anything about programming but I can imagine this kind of program and a separate database. The database would be filled by volunteers - I can, for example, provide all the settings of Polish operators, someone else British, French, etc. It would be good esp. for people who travel a lot.

unlocksmith said:
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards
Click to expand...
Click to collapse
TomTom 6 is made for Pocket PCs. It requires a touch screen to work, so you won´t be able to control it. I have had it running on my 8310 but it´s just silly to even have it installed. Go for 5.2 if you can find it.

I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.

Thanks for your help. I got my old one to work. I really like the colours in tomtom 6 tho.
Also on my phone i have a problem(s) with tomtom 5, I cant type in the post code B8 followed by anything like B8 3NU. Also I can't use certain Points Of Interest such as hospitals or cash dispensers. These work fine on my Wizard but I wana be able to do it all with TORNADO!

The software of dual sim selector don't works with that new rom (adapter of 10ª generation).
Well, I don't know if it works; the soft does not appear by any side.
I proved several solutions, but no it has worked to me.
Somebody can help me?
Thanks.

tejasphatak please rename the topic to "WM6 Torando bugs/issues" , so we can generally post bugs/issues regarding all WM6 tornado roms
Bugs:
1. The locklevel change to 1 randomly..
2. Sometimes the phone freeze when unloking kepyad.
It happened two times.
Issues:
1. When playing audio the CPU load is ~ 25-30% (@180 Mhz). It is normal ? (can someone with WM5 test?)
If using EQ and other effects the CPU load increase.
A taskmanager with cpu load info can be found here (it's for PPC but works also ,somehow, on smartphones)
More CPU load = more power = less battery
2. The system lags while writing to storage card (big cards, > 1gb). This issue is present on WM5 Tornado roms too (except iphone rom wich seems to deal better with sd).
Need a beter SD driver .
Same when copying via ActiveSync (has anyone tried usbfn driver from HTC VOX?)
3. when TCPMP is playing audio it keeps the backlight alive
Using andot's PEE V6.

bsider said:
I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.
Click to expand...
Click to collapse
Hello,
I've got a similar problem to this. It used to work fine until last week. I can't remember changing anything in my Hard/software setup but now it just hangs and only some of the contacts sync.
I've searched in the forum but can't seem to find any other reference to this problem. If anyone knows a solution (or any discussion of it) please let me know. Basic device info below:
SPV m3100 (HTC TyTN) running WM6
Windows Vista Home Basic
Windows Mobile Device Center
Thanks.

Blackberry client on WM 6?

I was wondering if anyone has got the Blackberry client working on a Treo 750v running WM6?

barneyrubble said:
I was wondering if anyone has got the Blackberry client working on a Treo 750v running WM6?
Click to expand...
Click to collapse
The BB connect don't work with WM6 actually...
from Palm : Do not Install this update if you are using Blackberry Connect (BBC). Palm Windows Mobile 6 does not support the BBC service...

this is a BB connect CAB...made by HTC
it's basically made for AT&T tilt (8925) = Kaiser
I guess it'll work with any WM6 pro device...
http://www.america.htc.com/connect/8925/
http://www.america.htc.com/mobile/co...e/default.html
installation CAB
http://www.america.htc.com/mobile/co...l/default.html
thanks to duke911

or download cab file to your pc:
http://download.america.htc.com/BBConnect_WM6_Professional_BB_4[1].0.0.84.cab
edit: thanks for the correction!

Corrected BB Connect URL...
http://download.america.htc.com/BBConnect_WM6_Professional_BB_4[1].0.0.84.cab

Tried this and it won't work for me.
Has anyone actually got this working on a Treo750?

It gets an IP for about a second but then it drops it.

Same here w/ 750c. Gets an IP address for a few seconds and drops to no connection. BTW I am using BBC 4.0.0.90, you can find it on sems.org. I wonder if anyone w/ the Voda or the Aussie ROM would give a shot to this BBC version to see if it makes any difference.
Thanks,
HC

I guess it's the same problem as elsewhere, where you need to change the machine type in window.nb (I think). Only problem is I can't find an easy explanation of how to do this.

I was trying BBC 4.0.0.90 with Voda ROM and no luck.

Strange thing today on my 750c - Got PIN
Hi all,
It seems that something is changing w/ either RIM or ATT. I installed again today BBC 4.0.0.90 onto my 750c w/ WM6 ATT leaked ROM, after the normal reboot, surprisingly, BBC service connected to the network and I got a PIN. Clearly it said "Connected" on the status tab. Well, I connected the device to my laptop and ran the BBC Desktop, the system was provisioned properly (I think ...), Notes Backend, but now it fails to connect to Blackberry, same symptoms as before, even after multiple soft resets, see comments above. I'll play around some more w/ it and let you all know if I get anything to work. In the mean while, if anyone else has any success, please share ....
Good luck
HC

I have WM 6.1 installed using BB Connect 4.0.0.97 and its a no go. Oddly enough, I tried the same thing on an earlier Vodaphone WM5 ROM and it still didn't work...any suggestions?
Btw, I get the same issues as above, I have a PIN listed (and IP address for a short time if I Suspend and Resume) but then when I attempt to input the PIN into my online BIS account and switch devices is says the information can't be verified.

Internet calling and GPS

Hi,
A few months ago, I installed WM6VOIP.CAB which downloaded here. Once installed and configured, GPS stopped working. I had to re-flash the phone and then get back GPS. Does anyone know this issue has been fixed or not?
Thanks in advance

There is a cab file out there that doesn't have this problem:
InternetCalling_21109.cab
http://forum.xda-developers.com/showthread.php?t=446652&page=105
I've tried a lot of the WMVOIP6 installs and this seems to be the only one that acutally works AND doesn't break the GPS in the process....

Do you have any idea why can it conflict with GPS? I downloaded this cab but installation is not sucessful. I guess the file RTCDLL.DLL is using by system and cannot be overwritten. How to unlock this file?

I forget the resaon for the conflict.
Shoot me an email at victor dot anderson at gmail dot com and I'll email ya .cab I'm using for the install - which works fine on my HTC Fuze....

Thank you, finally, I managed to install this cab. The file "RTCDLL.DLL" existed already and that is why the installation fails. I rename this file and then install the cab successfully. Then I setup the SIP settings(I use voipRaider). VoipRaider is appearred on Today screen, and the status changed to "Selected" when I turned WiFi on. Everything looks fine but how to make a internet call? I don't see any option to select internet call from phone contact list. Do you have any idea?
GPS is still working after I installed voip.

HTC_FUZE said:
Thank you, finally, I managed to install this cab. The file "RTCDLL.DLL" existed already and that is why the installation fails. I rename this file and then install the cab successfully. Then I setup the SIP settings(I use voipRaider). VoipRaider is appearred on Today screen, and the status changed to "Selected" when I turned WiFi on. Everything looks fine but how to make a internet call? I don't see any option to select internet call from phone contact list. Do you have any idea?
GPS is still working after I installed voip.
Click to expand...
Click to collapse
Once you're today screen is showing "selected" - then you're good to go - it uses the built-in dailer so just dial as normal either from the dialer or contact list....
Are you on ATT? One of the things that bothers me about ATT is that you can't use VoIP over 3G - but with the other carriers I think you can do this - there is a registry entry you have to change....

Yes, I am on AT&T. I did not make a call over 3G, but I can see "Selected" appears in 3G mode as well. Does this mean I can make internet call over 3G?

Maybe it's me but I can't find the link to the cab in that link you posted.

I can attach for you. here you are:

HTC_FUZE said:
Yes, I am on AT&T. I did not make a call over 3G, but I can see "Selected" appears in 3G mode as well. Does this mean I can make internet call over 3G?
Click to expand...
Click to collapse
sorry it took me so long to get back to ya...fogot about this thread and I wasn't subscribed to it ....
Anyway - if you see 'selected' while in 3G - then yes, you should be able to make voip calls over 3G.
have you updated your ROM or flashed your phone? If you have, which ROM are you using that got this to work?
And which version of the radio do you have?
Thanks!

Hi, Tech
I am using the lastest official AT&T ROM which you can download from HTC web site. I think it was released at the end of May.

One problem to use internet calling is that the voice comes out from speaker. Do you have same problem?

HTC_FUZE said:
One problem to use internet calling is that the voice comes out from speaker. Do you have same problem?
Click to expand...
Click to collapse
Yeah we all have that problem. If you're not going to use a bluetooth headset or a wired headset - there is something called audioroute that can help ya out...
http://www.softwarearea.info/audioroute-v12020.htm

I had some problems with navigating when the phone rings...
After I picked op the phone during navigating I can make a phonecall and
the navigation screen comes back...like it added this...
So that I can keep on navigating during the call.
The problem was that the most times the lost of the comport off the GPS(C4)
After hanging up the call the GPS connection lost his connection most of the times.
After installing this cab (InternetCalling_21109 work with GPS.cab)
The GPS keeps on running during and after dialing...lol...
Deleted the internet calling from the todays screen(I dont use this)
But I think it was not ment to get this function but for me it works!
Maybe someone else can use it 2...lol...
On a HTC Touch Pro T7272 original rom 5.05.404.1NLD

[Q] Anyone able to use Skype on TG01?

I installed Skype on my HTC 8525/Hermes (custom Schap's ROM for 6.0) a few months ago and it installed with no problem but just won't connect. It goes through the motions with the swirling icon, but finally times out. The same happened when I installed Skype on my 'new' TG01. I looked in the WM forums here and someone said to try a different ROM. I'm now on my 2nd ROM, FXDJ's excellent 6.5 ROM2_0,update 6, and still have the same problem. Of course, I tried it first with the original Orange 6.5 version. I've also tried 3 different Skype versions for WM that all installed with no errors. If anyone has a solution I would really appreciate it! BTW, during install it says have to have wi-fi/Active Sync or 3G connection. We don't even have 2G in this area of Thailand so connected to Internet via Active Sync.
Thanks in advance!

I tried my luck with Skype on TG01 a long time ago, both winmo6.1 and 6.5, found some outdated (even at that moment) skype winmo kits but they didn't seem to work anymore. Skype communication being proprietary, they can change it whenever they want, thus rendering old kits useless...
If however anybody does have Skype on Tg01, please share it with us the noobs that don't know that it works on winmo... Thanks

a_nini75 said:
I tried my luck with Skype on TG01 a long time ago, both winmo6.1 and 6.5, found some outdated (even at that moment) skype winmo kits but they didn't seem to work anymore. Skype communication being proprietary, they can change it whenever they want, thus rendering old kits useless...
If however anybody does have Skype on Tg01, please share it with us the noobs that don't know that it works on winmo... Thanks
Click to expand...
Click to collapse
Greetings a_nini75,
I do remember a Skype announcement last year IIRC saying they weren't going to support WM anymore, but I thought that was just for software updates. Also, other WM users here seem to still be able to connect. My brother has been using Skype on his BB Storm 2 with no problems until recently when it suddenly would not connect to the Skype server. He called his telecom to see if they were blocking the connection but they said no blocking whatsoever. Now that M$ bought Skype one would think that WM support would rise from the ashes. Sure hope someone has a fix!

This is the last Skipe version working on WM
http://bit.ly/nDWZrI
and it works for me.
Try it !

Pere said:
This is the last Skipe version working on WM
http://bit.ly/nDWZrI
and it works for me.
Try it !
Click to expand...
Click to collapse
Hi Pere,
Thanks for the link. I have this version already and it didn't work, but downloaded and installed it from your link and it's doing the same thing...showing the Skype white and blue screen with the spinning icon, but not connecting. I confirmed that my Internet connection was good before starting it. Any suggestions?
Thanks!

I ve hav same problem.
Connect whit wifi, then enter your login,pass. Then wait about 2minutes , it will say that cannot connect, something like that. Then try to connect once again, after second time skype should connect normaly...

pozitiv00 said:
Connect whit wifi, then enter your login,pass. Then wait about 2minutes , it will say that cannot connect, something like that. Then try to connect once again, after second time skype should connect normaly...
Click to expand...
Click to collapse
Greetings pozitiv00,
I've tried that over and over again with 2 different phones, 2 different versions of WinMo and 2 or 3 or 4 different Skypemobile cab/exe files and it still won't connect. The Skype icon just spins. I wonder if connecting directly via USB to Windows Mobile Device Center (W7 Ult.) might cause a problem, since my D-Link Wi-Fi modem is in the shop...again. I've also tried connecting to Skype via cell tower, also no joy. I can peruse any other website except Skype.
This is baffling!

Yeahhh
I can send you CAB-file for SKYPE that works, and U can send me code of some PPC programs whats need it .
OK?

Dolt$ said:
I can send you CAB-file for SKYPE that works, and U can send me code of some PPC programs whats need it .
OK?
Click to expand...
Click to collapse
Sure, just send me a PM. I'm not having a problem with installing any of the Skype versions, they just won't connect. They go through all the motions, but just won't connect to the Skype server. As far as PPC programs I'll be happy to share whatever I have.
Thanks!

CrashMurdock said:
Sure, just send me a PM. I'm not having a problem with installing any of the Skype versions, they just won't connect. They go through all the motions, but just won't connect to the Skype server. As far as PPC programs I'll be happy to share whatever I have.
Thanks!
Click to expand...
Click to collapse
hello
Skype 3.0.0.256 cab
works on almost any phone
only the first time you have and you have to wait and wait longer
copy itself from the Application Data Folder Skype
as bakcup and you will not even have to wait
Skype working is personally checked
on
Topaz
HD (blackstone)
HD 2
Omnia 2
Omnia B7610
and
xperia x1
omnia i920

jorobg said:
hello
Skype 3.0.0.256 cab
works on almost any phone
only the first time you have and you have to wait and wait longer
Click to expand...
Click to collapse
Greetings jorobg,
I've tried this version already. It installs OK but doesn't connect. How long to "wait and wait longer" before it connected for you?
Thanks!

CrashMurdock said:
Greetings jorobg,
I've tried this version already. It installs OK but doesn't connect. How long to "wait and wait longer" before it connected for you?
Thanks!
Click to expand...
Click to collapse
months ago on wm 6.5.x I have test the same skype.cab- it works. The FIRST time run it will no log in. close it after try. the all next time log in very quick .........

CrashMurdock said:
Greetings jorobg,
I've tried this version already. It installs OK but doesn't connect. How long to "wait and wait longer" before it connected for you?
Thanks!
Click to expand...
Click to collapse
by my always working 3.0.0.256
but on the HD2 first time mast waiting and waitnig
on the Topaz abaut 5 min.
on the blackstone 5 min.
I`m take alweys backup of the folder skype in the application data and newer waitnig
try it conect via wifi to the network then
log in wrong
to see is the evrything ok
if you get response from Skype network
pasword or the login is wrong
then is nothing wrong with Skype
it is somewhere near you
sory abaut eng. language
all exe files are COMPRESED _ Squeezer