I was looking for some unlocking software and found a bunch unlocking calculators for DCT4 phones but obviously the Treo isnt one of those............
My question is, what type is a Treo? Not a DCT4 but......?
Thanks
Related
i am getting an 8125 next week from somebody who was a cingular customer. he got the factory unlock code from a cingular rep (but he cant unlock it cuz he doesnt have a different carriers sim card). is there any difference if i use that to unlock it or if i use the lokiwiz program i keep reading about??
also, as you can probly tell im new to pda's. to load the window mobile 6 would i have to unlock the CID (which im not even sure what it is)? what are the benefits for using wm6 and is it fully functional on the 8125 (ive read a few posts from ppl that say they have problems). i also saw a thread for making an i-phone skin...is it possible to have both wm6 and this iphone skin? also, can anyone explian what this aku2 rom is?
sorry to make this post, but there are so many threads about the stuff i am inquiring about and hundreds of pages and its just too long to go thru. if anybody can help me out that would be appreciated...thanks a bunch!!!
Other than to say you need to read some of the sticky's in the WM6 forum, as well as the Wiki's - here's a few hints:
If you have a G3 - get it CID unlocked. If it's a G4, you can leave it locked and still flash WM6 just fine - if you use shelltool.
WM6 is mostly cool factor, with a few new features. How many people can say they're running WM6? Bleeding edge, baby, but it ain't without some pain.
iPhone skin - yes, and good luck. I tried it, and it was a slow pig - it looked alot like the iPhone, but not worth the bling. Try driving your car with a painted tarp on it. yeah, right. Can barely open the doors.
As for aku2, no idea. Hit search and check it out.
You got lots of reading ahead of you. I spent 10 hours reading before my first attempt at flashing - and I'm a fast reader.
yea im doing a lotta reading....where is the link to the wm6? i cant seem to find it!
check my sig for all unlocking problems...once you do that worry about WM6..Just check out a section and read up on the roms
tha_dream said:
yea im doing a lotta reading....where is the link to the wm6? i cant seem to find it!
Click to expand...
Click to collapse
Don't learn by flashing. Learn by reading. $400 is a lot of jack to waste trying to learn by experience.
tha_dream said:
i am getting an 8125 next week from somebody who was a cingular customer. he got the factory unlock code from a cingular rep (but he cant unlock it cuz he doesnt have a different carriers sim card). is there any difference if i use that to unlock it or if i use the lokiwiz program i keep reading about??
also, as you can probly tell im new to pda's. to load the window mobile 6 would i have to unlock the CID (which im not even sure what it is)? what are the benefits for using wm6 and is it fully functional on the 8125 (ive read a few posts from ppl that say they have problems). i also saw a thread for making an i-phone skin...is it possible to have both wm6 and this iphone skin? also, can anyone explian what this aku2 rom is?
sorry to make this post, but there are so many threads about the stuff i am inquiring about and hundreds of pages and its just too long to go thru. if anybody can help me out that would be appreciated...thanks a bunch!!!
Click to expand...
Click to collapse
You can't use it with the cingular sim card beause you don't need it!
You have to borrow a sim card other than your carrier's sim card to apply the code. Once applied, the sim portion of your cell is unlocked for life if you have the right code.
Lockwiz will CID unlock your phone as well. Once successfull with this portion, you can install any ROM or Custom ROM....designed for your TYPE of device.
You are currently running an AKU2 ROM.
Based on your line of questioning, you have a WHOLE lot of reading to do. You sound like you're on your way to be stuck in bootloader mode.
Do your reading 1st, collect all your tools and all you need can be found by you doing the research in the threads. All the answers to your questions are in the WIKI....it's your friend.
This was a freebee....if you're not willing to go thru the hundreds of threads, as you stated to get the answer....use the search tool or stay with your factory ROM.
Remember: This is a Developer's Forum, not a USER's Forum
This thread you created was a waste!
no pain ... no gain....
imho it starts to look like a 3th rang helpdesk here
Dear all,
I'm a newbie, please tell me what is the kind or type of X01T (Toshiba Portege G900)? Is is a Hermes device? and can I unlock it with HTC_Hermes_SIM_CID_Unlock_v3a application?
Thank you for you reading and answering!
Saw this thread so decided to ask question here instead of posting a new one. Sorry.
May I know if there would be any problem if i install an english version over the original one?
The X01T is in no way related to the X01HT, HTC or the Hermes. It is a device released by Toshiba and only shares an OS in common with the Hermes. It will have its own firmware, ROM, loader, radio and other components. They may appear similar in design but are otherwise totally not related. If you like expensive bricks, feel free to attempt to run Hermes hardware hacks.
I am looking for X01T stylus and batteries...are these on sale in Japan? And can I use X01T batteries on G900? Thanks...
Hi guys,
I've just received my T mobile branded Kaiser. It's called the Vario 3.
As i am not looking to use the device with tmobile. Is it possible to debrand this device? If so, please explain how. My assumtption is that i'll need to upload a generic rom to the device.
Any advice would be greatly appreciated.
Please read the forum first, before you post a question...
Especially the sticky threads...
To be short:
We know it's called the Vario 3 / Vario III
...
You can probably unbrand the outside by rubbing some sugar against the logo's (I don't take any responsability for this, but it's known to be working on a T-Mobile MDA Vario I).
Th 'inside' is also known as the ROM an can't be unbranded yet...
Just wait untill we are able to CID-unlock it, so you can flash the ROM with an unbranded one...
For now you can hard-reset (format) it and jst after the screen alignment when it's counting down for customization soft-reset it by pushing your stylus up the little hole in the bottom of your device...
Good luck...
Oh, and...
Welcome to the Kaiser forum
Hi,
Sorry for not reading the sticky stuff, i'm just not that familiar with the technical terms for these devices so i thought me asking 'again' novice-style may be cool. Thanks for your help on this mate.
No problem...
I started out this way too, so...
I can tell you it's really worth it to dive in to this forum...
You can learn a lot if you check the threads once in a while...
Be carefull with advanced adjustments to your device, especially when you haven't got the right ROM for backup...
On the other hand, don't be scared to try out some stuff, because it's very hard to brick a device...
BTW:
Bricking means you screw up youre device so terribly (beyond repair) that it's turned in to a brick / expensive paperweight...
Just tried putting in my vodaphone sim into the Vario 3 and it says SIM LOCK code needed....Any advice where to get one from apart from t mobile?
Sorry...
I guess you'll have to wait...
pof is working on a CID-unlocker and probalby on a way to SIM-unlock it too...
I heard it's a difficult procedure, because the way it's simlocked is 'new'...
Maybe you can try www.imei-check.co.uk...
It's a paid service...
Decide for yourself if you're willing to pay, or have the patience to wait for a free solution...
I'm definatley sticking with the last one...
In the interest of trying to update my phone back from WM6 to WM5 I flashed my T-Mobile SDA (US) with the T-Mobile SDA (UK) image. I now can't get it to turn on or anything.
From reading here I think I flashed my Tornado with a Hurricane image. Is that correct? If so, is there any way I can recover my phone? I have tried getting into the bootloader by holding the power, camera, and the communication manager button, but nothing happens. I do occasionally see the left light flash orange for a second at random times. It doesnt seem to light up when I charge it though.
Did I just brick my phone?
http://forum.xda-developers.com/showthread.php?t=294444
The simple answer being - it's dead. Sorry about that. It's a costly mistake.
What's the condition of the housing and keypad? I might be interested to buy it for parts. I got my SDA used a long time ago and the previous owner was a bit too rough with it (basically, it looks like poo).
bipinsen said:
The simple answer being - it's dead. Sorry about that. It's a costly mistake.
Click to expand...
Click to collapse
And a very EASY mistake to make, considering the fact that on the home page of this forum, it has the picture of the Tornado before the HUrricane, yet the tornado forum is listed AFTER the hurricane forum.
I spent many trips here trying to figure out whether the SDA was a tornado or a hurricane. Of course they don't even have SDA is a model type listed there, which is even just as stupid.
Sorry, but this is just inviting people into catastrophy, and it really sucks bad. In fact it's quite fair to say if this were not the case, there would be many less bricked SDA's (Also known as Tornado, but apparently the SDA is not a recognized model here).
See attached image that almost cause me to brick my SDA
Tell me that is not confusing?
Flashing the US SDA with a UK SDA ROM is a common mistake. I know, I did it too, bricking my first Tornado 2 days after buying it! My advice; sell it for spare parts and get another one from ebay. I'm really sorry, my friend, but there's nothing you can do for your phone now.
And please do not advice him about JTAG flashing, etc. Theoretically, it is possible, practically no one in this forum had it done! No one knows how to do it!
elsmacko said:
And a very EASY mistake to make, considering the fact that on the home page of this forum, it has the picture of the Tornado before the HUrricane, yet the tornado forum is listed AFTER the hurricane forum.
I spent many trips here trying to figure out whether the SDA was a tornado or a hurricane. Of course they don't even have SDA is a model type listed there, which is even just as stupid.
Sorry, but this is just inviting people into catastrophy, and it really sucks bad. In fact it's quite fair to say if this were not the case, there would be many less bricked SDA's (Also known as Tornado, but apparently the SDA is not a recognized model here).
Click to expand...
Click to collapse
You're wrong, those pictures are correct. I realy hate this modern attitude that when people mess up they just blame someone else for it. Yes, getting throught the naming jungle aint easy at times but still, there's no reason to blame personal mistakes on the forum. People who flash need to be aware that it's always a risky thing to do unless one knows exactly what one's about to do. So people need to invest time and learn all the details about a) their exact device and b) how flashing works. It's called personal responsibility.
I havent posted here in a while.. I have contributed alot, so don't flame me for this quesiton.. I haven't been up to speed here in a while.. So if possible can someone point me in the direction of unlocking the Pantech Duo.. yes I have used SEARCH so don't go there.
Thanks
If you mean sim unlock there are some websites that offer their service.
If you mean app unlock just search for SDA unlock.
SDA same as Pantech? I don't know smartphones.. lol... just PPC's.
Well... you could try SDA unlock.
I'll look into it.. since it's APP unlocking, it's not possible to brick correct? ..
The program only change some settings on the registry. The worst that could happen is you doing a hard-reset
that's what I was thinking.. I figured since the Pantech isn't an HTC phone, that that was the reason a SIM unlocking application had not yet been developed.. I think I might try debugging some things see if I can't come up with one.