If you are using AKU23 ROM, you can change the size of page pool by editing the OS part extracted from the nk.nbf file with a hex editing tool.
The value at address 03EC8AE defines the size of page pool, by default it is "C0 00". Changing it to "00 01" can increase the size of page pool from 12MB to 16 MB.
For page pool and it's relationship with rom performance, pls check here
http://forum.xda-developers.com/vie...ghlight=&sid=1a70ca44f9fa0be67be6c40900096b61
Have fun!
speeding up prophet with aku 20
Hi.
Thank you for this info. Just few questions if you don’t mind.
Have you tested it on prophet yourself? Is the improvement noticeable? And is it only for AKU 23 or it would work in AKU 20 roms as well? And if yes, would you be kind and tell me if it’s the same values at the same address that needs to be changed or it is different value and address in AKU 20 rom?
Basically what I am trying to find out if I can apply this hack to my prophet running dopod 818 pro 2.15.13.27 wwe rom with aku 20 and is this going to make a noticeable difference. Or would you recommend updating to newer rom and latest AKU? If yes, will it update IPL and SPL? Would that cause a problem in upgrading and downgrading the device in future? I have CID unlocked this device already, but I wonder if updating IPL and SPL would relock the rom.
To be honest, this prophet is slow as hell comparing to 2003 devices and I would love to speed it up. That would just make this device irreplaceable for me.
I am sorry I ask too many questions, but I would really appreciate your time and assistance in learning how to solve this issue.
Best Regards,
Aleks.
P.S. I did read the thread on the provided link, but it references everything pertaining to BA and Wizard.
Paging Pool 8mb
If you are using AKU23 ROM, you can change the size of page pool by editing the OS part extracted from the nk.nbf file with a hex editing tool.
The value at address 03EC8AE defines the size of page pool, by default it is "C0 00". Changing it to "80 00" can increase the size of page pool from 12MB to 8 MB.
Free RAM= 29.5mb
For page pool and it's relationship with rom performance, pls check here
Yunshen
Sorry. I`am copy, you post. I bad write on english/
(aka Shaman) 4pda.ru
what about aku 20?
so in another words, you don't know if it can be done with aku 20 rom or it is not possible, right?
Hello,
i have tested it with the latest original German O2 (AKU20) ROM on my Neo and it works. I have made a backup of the OS ROM with awizard, edit the nba file with an hexeditor and recovered it to my Neo. After an HardReset the PagingPool is bigger.
the rom has to be in nba format, not nbf?
Thank you for your reply and info. So according to you the rom has to be in nba format? I thought I was missing something. This wasn't whole story then.
I've got a problem with finding the value at address 03EC8AE that defines the size of page pool (C0 00) I opened nbf file of my dopods rom with hex editor as instructed by yunshem and had no luck finding this address. I also tried several other roms, including pdamobiz rom that is already patched and still couldn't find it! Now I see why Will try it tonight, thank you!
no luck!
The given address in not found in the 2.0 rom. I have tried 5 different roms with no avail. In all possible formats, .nba .nbf .fat
And to totaly drive me crazy, on top of everything else, aWizard keeps telling me that it can't update itsutils.dll ! I tried everything I could think of and still couldn't back up my dopod 2.15 rom! I had this problem when I tried to dump the imate rom, but somehow it worked after I manualy copied the itsutils.dll into windows directory, but this time nothing worked! Any ideas?
Is this correct?
I used a hex editor and opened up the official Dopod818P rom 2.15.13.27. I first extracted it as an nba file using awizard.
I can't find the 03EC8AE address either, but I selected goto address, and it pointed me to 3EC89E. There, I saw C0 00. I changed it to 00 01 as per the picture below.
I think this should be correct, right?
Related
Thanks to various pioneers on this forum - I have just updated the Dopod 1.11 CHT ROM to have access to 26.72M Storage.
1. Use the official Dopod link www.dopod.com.tw/download/Dopod818_1110_153_11100_Ship.exe to update the ROM to CHT 1.11.
Use MaUpgradeUt_noID.exe if your pocket pc is not a Dopod 818.
2. Run RomUpdate.exe to dump the ROM to SD Card.
3. Run "ntrw read chtbig.nb1 s:" where s: is the SD drive.
4. Use HexEditor to modify "80 00" to "b8 01" at the following two locations of chtbig.nb1 - 00007e4a and 01fc232e.
5. Run "ntrw write chtbig.nb1 s:".
6. Flash the pocket pc with the new ROM on SD card.
The key is about identifying the right locations of the ROM to modify. Please note that different machines and different ROM versions will have different addresses to modify.
Thanks for your explanation
How to identify the right locations to modify?
I just have my O2 mini upgraded to 1.12.00WWE and would like to modify it to bigstorage.
Regards
Woo ~~ good job !! but can you show more for point 4
Talents said:
4. Use HexEditor to modify "08 00" to "b8 01" at the following two locations of chtbig.nb1 - 00007e4a and 01fc232e.
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=23250&sid=97eea813b4222410de0a3e6fbb2f9390
Hey ! I got it. now my O2 had 27MB storage and CHT 1.11 rom . :lol:
I am glad that the method works on the pocket pc of others.
In theory, this DIY method should work for any newly released ROM versions, unless HTC changes the coding structure.
Thanks. It works for me too.
Just a reminder for others: The first boot will takes about 5 mins for formating the storage space.
yes, I have also encountered this problem but my O2 mini is work fine now.
So far, we know that BigStorage can be created for 1.11 or 1.12 ROMs by replacing 80 00 with b8 01 at the following two locations:
English version (i-mate JAM, T-mobile compact, etc.)
7e32 and 211e32e
French version (qtek, etc.)
7e32 and 212332e
German version (T-mobile compact, etc.)
7e32 and 213232e
Traditional Chinese version (Dopod 818, O2 Asia, etc.)
7e4a and 1fc232e
Simplified Chinese version (Dopod 818, etc.)
7e42 and 1fc232e
It seems that the two locations change with the language, rather than the brand. Older ROM versions have different locations.
Could anybody provide the locations of other language versions for the reference of those who need them?
Please note that some have reported success in creating the BigStorage by replacing the bytes at the first location only, leaving the second location unchanged.
For those who need a summary of the steps:
1. Dump your original ROM to SD card. (romupdate.exe and ntrw.exe)
2. Edit your own ROM. (hex editor)
i.e. search for the two locations in the ROM with "02 00 00 80 00 20" and replace 80 00 with b8 01.
3. Write the edited ROM back to the Magician and hard reset your machine. (ntrw.exe)
That's it!
- no more downloading of others' BigStorage ROMs
- no need to replace the first 416 bytes
- no more unsolicited splash screens
- a simple, safe, do-it-yourself method to create your own BigStorage based on whatever ROM version you already have or upgraded.
Thank you so much.
I have an Italian ROM. Can anybody give me some help?
Talents,
A good assurance for people....
Nice one
I put this together with bits taken from this forum
Does anyone know if this will work for older versions of the ROM (i.e. 1.03 or 1.06)? I still am having problems with the GPRS with the newer ROMs so I would like to apply the BigStorage to older ROMs.
Thank you,
F
I used this method on the 1.03 wwe version and it is working perfectly. I used the same method as described. Found the two locations made the changes etc. and all is well.
Thanks, I will try it out
NTRW PROBLEM
Everytime i try to run NTRW
i get the following message
USAGE: NTRW FILE DRIVE:
and it doesn't create a file
what am i doing wrong?
Re: NTRW PROBLEM
micha said:
Everytime i try to run NTRW
i get the following message
USAGE: NTRW FILE DRIVE:
and it doesn't create a file
what am i doing wrong?
Click to expand...
Click to collapse
You seem to have an old version of ntrw. Get the latest one (2.0) from this forum's FTP server.
Cheers
Daniel
Worked for me with French_11202_125_11210 8)
The first reboot took more than 5 min though.
glad to know that it works on your French ROM.
We should have warned everyone to be patient with the first boot up after upgrading. It takes 5-10 minutes to format the BigStorage, with the screen apparently "stuck" at the splash screen.
I've found a .nb1 file for BigStorage on the ftp server of this forum. I think it's the BigStorage version for ROM 1.12. Is it possible to use that file and enable BigStorage without a cardreader?
For example, when you execute the upgrade program an TEMP directory is created with a bunch of files in it. If I were to copy those files (which also include some .nb1 files) and replace one of those with the one I found on the ftp, would that give me BigStorage?
Welrogie,
I was actually thinking the same thing as you...
Although if it were possible, I'm sure someone would have posted somewhere on this site anyway (?)
BigStorager work great for 1.12 FR ROM
many thanks
your post is excellent, did it to a 1.12 and no probs, please just check the pdf instruction sheet as it mentions 2 different file names, 1 to download from SD card and another to upload, maybe I misread it but I just uploaded the modified version of the file I downloaded and it all went swimmingly. cheers
Just carrying out a few 'test' searches on rom files to locate the necessary information...
On the 3 that I have performed the search on, i seem to find the bytes ok but the locations never matches the one stated by Talents and others. Does it matter that they appear in different locations than the ones specified?
Thanks.
I just finished upgrading from Qtek 1.11 WWE Big Storage ROM to T-Mob 1.13 WWE Big Storage (with 1.13 Radio). Since the information available on the forum is spread over many threads, I thought I would amalgamate everything here ...
NB: ampda_How_To_PPC_Upgrades_V1.pdf (attached) tells you how to use ALL the tools I mention ... thanks to ampda for this useful write-up!
Before you start:
a) Take full backup of your PPC on SD using Sprite Backup or any other 3rd party app.
b) Take copy of SD on PC
Now for the ROM upgrade ...
1. Take backup of existing ROM (mine was BigStorage 1.11) on SD using romupdate.exe (attached) - Sec. 4 in PDF
2. Convert ROM (now on SD after step 1) to PC using ntrw ver2.0 (attached) - Sec. 5in PDF
3. Install 1.13 T-Mob NL WWE ROM (from ftp ... ftp://xda:[email protected]/Magician/Shipped_ROMS/NL_11300_131_11200.exe) using MaUpgradeUt_noID (attached)
4. Follow on-screen instructions and reset device just before installing customisations (to make extended ROM accessible)
5. Copy Extended ROM to PC (for later use) using Windows Explorer
6. Install 1.13 Radio using MagicianRadio_1.13.00.zip from FTP (attached).
This will hard rerset again so make sure you press the reset before T-Mob customisation starts.
7. Repeat steps 3 and 4 to create an nb1 file of your new 1.13 ROM on PC
8. Open your new nb1 file with a Hex editor (download the latest FREE version from http://www.hhdsoftware.com/hexeditor.html), locate the 02 00 00 80 00 20 and change 80 00 to b8 01 (at 3 locations in this version of ROM - not just 2)
9. Transfer your new ROM to SD card using ntrw ver 2.0 - Step 7 in PDF
10. Dump your new Big Storage ROM onto your Magician - Step 8 in PDF
You will note that after step 10 your Magician will take a VEEEERY LONG time to boot the first time. This is normal.
Install any required Extended ROM programs from the folder created in step 5 above. To install these CAB files just copy them anywhere on your PPC and click once to install.
Enjoy!
tnx I'm going too try this!
It has been several months since I last visited this forum. I am wondering, why do we need to install the 1.13 Radio using MagicianRadio_1.13.00.zip in step 6?
I thought the 1.13 T-Mob NL WWE ROM should already have the 1.13 Radio... or is it unstable?
Thanks.
programatix said:
It has been several months since I last visited this forum. I am wondering, why do we need to install the 1.13 Radio using MagicianRadio_1.13.00.zip in step 6?
I thought the 1.13 T-Mob NL WWE ROM should already have the 1.13 Radio... or is it unstable?
Thanks.
Click to expand...
Click to collapse
Nope, it has radio 1.12 (don't know why, radio version 1.13 is out for many months now...)
KoBolD said:
tnx I'm going too try this!
Click to expand...
Click to collapse
Tell us how it goes :wink:
pietrucci said:
Nope, it has radio 1.12 (don't know why, radio version 1.13 is out for many months now...)
Click to expand...
Click to collapse
Ok, thanks for the answer. Actually I'm already using radio 1.13 for months already. Now I'm wondering about the changes from rom 1.12 to 1.13... any idea? Does the Pocket IE (with SBP Plus installed) works correctly when mutiple windows are opened?
Thanks again.
i cannot convert ROM to PC using ntrw.exe
i hav follow the instruction by ampda_how_to_PPC_Upgrades_V1.pdf,
and i hav in section 5. i cannot convert the ROM to PC.
its appear:
c:\>ntrw read myrom.nb1 l:
usage: ntrw file drive:
can anyone helps me???
urgenttttt.....
it seems easier just to decode nbf, make bigstorage patch,
change header to what's in DeviceData.txt
and then encode and flash using ROMUpgradeUt
All steps:
1. run NL_11300_131_11200.exe - this will
2. unpack files to temp - copy them ! and
3. write DeviceData.txt to \Windows - copy this one too and view with notepad
4. decode nk.nbf -> nk.nb1
5. hexedit header to correct ID from DeviceData.txt and
6. replace pattern for bigstorage in hexeditor
7. encode nk.nb1->nk.nbf
8. run ROMUpgradeUt.exe to upgrade CE image
also, this way you will save the contents of increased \Storage folder if previous rom was bigstorage one
Attach: src+bin of enc/dec utility for nbf format used in ROMUpgradeUt.exe ver. 3.0.1.0
bin is in the Release folder
Usage sample (must be run from the same folder as nbf files or specify full path):
nbfdec -d nk.nbf nk.nb1
nbfdec -e nk.nb1 nk.nbf
kta said:
NB: ampda_How_To_PPC_Upgrades_V1.pdf (attached) tells you how to use ALL the tools I mention ... thanks to ampda for this useful write-up!
Click to expand...
Click to collapse
Thanks for the thanks much appreciated
Re: it seems easier just to decode nbf, make bigstorage patc
hlt said:
it seems easier just to decode nbf, make bigstorage patch
Click to expand...
Click to collapse
Hi hlt,
I tried your description and all I can say is: IT WORKS! And in my humble opinion this is the easiest method for BigStorage. I've some extra info in your steps, the parts where I had questions, for others to profit.
All steps:
1. unzip NL_11300_131_11200.exe (or any other shipped rom)
2. copy the getdevicedata.exe to your magician and execute to write DeviceData.txt to \Windows and view with notepad
4. decode nk.nbf -> nk.nb1
5. hexedit header to correct ID from DeviceData.txt (probably only if using a rom from other provider)
6. replace pattern for bigstorage in hexeditor
7. encode nk.nb1->nk.nbf
8. run ROMUpgradeUt.exe to upgrade CE image
also, this way you will save the contents of increased \Storage folder if previous rom was bigstorage one
Usage sample (must be run from the same folder as nbf files or specify full path):
nbfdec -d nk.nbf nk.nb1
nbfdec -e nk.nb1 nk.nbf
Thanks a lott for this wonderful piece of code,
M
Thanks Alot, your guide has allowed me to upgrade from a very early rom to this new one which makes my mdac so much faster! i recommend this upgrade route to everyone!
thanks again
R
thanxxxxxxxxxxxxx
Hi I have a question. Its been months also since I visited thise site and I didnt know there is already a new ROM for the XDA-Mini. My Rom version is 1.11.00 WWE and I did the Big Storage trick before so I dont have the ExtRom now.
If I upgrade to this new ROM versions, will I get a ExtROM back again or I still have the Big Storage?
thanks so much...
You will get the EXTROM back. The removal of EXTROM has to be done for every ROM you install, hence steps 8 to 10 above
I guess there will always be a chance of things going wrong, but as you don't forget to locate the 02 00 00 80 00 20 and change 80 00 to b8 01 in your decoded nk.nb1 and use the re-encoded nk.nbf in the upgrade you'll have BigStorage. I did it with a crippled magician, I lost all my storage with a BigStorage attempt, and it gave me back a 26.72MB storage. Now I'm moving a lot of files over to storage, so far all my 'program files' are there and large ones like album and camera. After moving some registry and shortcut changes are needed, but it works. Now got 8Mb in main memory stored and this is with a complete ext-rom installed (manually), MMS, Blackberry and Caller Id are quite large and will be gone this week after a planned hard-reset. First I need to figure out some more files to move. Keep in mind that programs from storage are starting slower than from main memory, especially when you move over the 'program files' and dll's as well.
Good luck, M
kta said:
You will get the EXTROM back. The removal of EXTROM has to be done for every ROM you install, hence steps 8 to 10 above
Click to expand...
Click to collapse
thanks, kta for the info.
I'm itching to give it a try now. But wait....is the ROm upgrade v1.13 that you guys are talking about here, applicable to all kinds of XDA-Mini? I mean I am using the O2 XDA-Mini purchased here in the Philippines. Its asian version but its "english".
Because I remember the last upgrade I did which procedure I got from here also...I got the upgrade procedure from a thread specified for XDA Asian version. This time, I couldnt see a thread for Asian XDA specifically....instead I see there's a common thread for all. But its a T-mobile rom, isnt it? Am I in the right thread?
thanks....
Hello dinoalbert,
This is a WWE rom, haven't found an asian 1.13 on the ftp. There's only one asian rom there: o2asia_11100_922_11100_ship.exe, don't know which rom you have currently so maybe you can use it. I guess the trick with exchanging radio's and the BS trick will work, won't know why not.
Gr. M
dinoalbert said:
thanks, kta for the info.
I'm itching to give it a try now. But wait....is the ROm upgrade v1.13 that you guys are talking about here, applicable to all kinds of XDA-Mini? thanks....
Click to expand...
Click to collapse
Yes, this ROM is good for all variants of the HTC Magician, except the 850MHz radio version. You would need a different RADIO for that.
KTA,
Do you know the difference between the 1.12 radio and the 1.13 version? Also the 1.12 in the shipped rom has a newer file-date than the 1.13 one, or is t-mob on a different number scheme?
Thanks,
M
@oltp
yup thats the one that I have now...ma_o2asia_11100_922_11100_ship......thats the last ROM upgrade I did which I also got it from here last May or June I think. But that seem to be along time ago already....so I was wondering if there is a new ROM upgrade now.
@kta
so you mean I can go ahead and upgrade my rom to the latest 1.13 rom? My current radio version I think came with that rom i mentioned above...ite version 1.11.00
so what will happen if I upgrade to the latest rom? Why do I need a different radio version?
thanks again...
Hi all, my english is very bad - sorry for that!
I want the 16mb Paging Pool on my O2 German Rom, how can i chance ist?
Or can make this somebody?
Please - Please help me, please
Hi,
i tested it with the newest German O2 ROM. You must install the O2 ROM on youre device and backup the OS ROM with awizard (start command line under windows when youre device is connected, start awizard, at first option e then u and then b). After this you can edit the nk.nbf file with a hexeditor how Yunshen in his thread wrote http://forum.xda-developers.com/viewtopic.php?t=63505 and Hard Reset the device.
My Storage was after this only 40MB instead of 44MB before. I have not testet my Neo more with this rom because i want use a newer ROM with Aku2.3 and the German O2 have only Aku20.
thanks, i have do this, but it create a nba file not a nbf file, how can i change ist without damage my device
Edit:
I have download the original O2 Update and extrected the *.exe, the was the nk.nbf, but i can´t find the 03EC8AE with the hexeditor???
Can you tell us where to find the right Line in the Hex Code ?
The Line given in your Link is for AKU 2.3 and does not exist in the official O2 Rom (or i did not find it)
Thanks !!!
Hello,
i have used the search/goto function from my HexEditor and have found the adress.
from Yunchen
The value at address 03EC8AE defines the size of page pool, by default it is "C0 00". Changing it to "00 01" can increase the size of page pool from 12MB to 16 MB.
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=63505
After recover and hard reset my Neo i have 4 MB less then before. How stable the system runs i cant say. It was very fast but i have testet then other ROMs and have now the orig O2 ROM without pagingpool in use because i have not enough time this days for testing.
Read end of post for updates .. Thank you .......
====================================
WM2005 AKU3.5 by LLBASHA
ROM: 3.50pp16a1
dated: 02.02.2007
OS 5.1.195 (Build 15698.3.5.0)
RamDisk 48mb
PagePool 16mb
Storage 30.53mb
Program 61.29mb
For Himalaya PH10B (XDAii MDA2 Qtec2020 Imate Pocket PC)
=============================================
Hi everybody,
This is, I guess, what MANY, I believe, is looking for.
A good clean stable and fast WM5 rom based on AKU3.5 that you can change easily to your liking... right?
Well, your wishes come true. Here you will find my new ROM, the tools, and procedure to modify it!!!
It does NOT include ANY personal info.
It include clean original splash screen theme
It includes lots of Today-plug-in that you can disable if you do not want (disabled by default).
Modifications involve, beside adding & removing files, changes of hklm.reg, hkcu.reg, default.hv, and system initflashfiles.dat files. The ROM has been optimized to the extremes, hence if you decided you want to modify it please make sure what ever you add MUST be less or equal to what ever you delete.
It took me continuous 10 days of work and 8 flashes to get this procedure and ROM right.
I have tested the room and it works perfect ... however, please forgive me if I have overlooked something.
Note: I suggest you test the rom BEFORE you install any extra programs of your own ... and then again AFTER installation... so you can determine the source of the problem or the violating program, if any.
If you want to automate the installation of additional programs, stick the cabs file in the ExtROM directory in the SD-card and edit the config.txt accordingly.
To use the modification tools, just drop your favourit NK.NPF file in the RomEditor directory and click on steps 1 to 7 and follow the prompt.
It could not be easier ... Well, is it??? You will soon find out!!!!!!!!!!
Final word of thanks to tjlabais for his detailed tutorial, scripts and support. Many thanks to Mamaich for his incredible tools, as well as to Helmi_c, Buzz_lighter, Tofclock, and all those who contributed indirectly or in the past to get WM5 working on our Himalaya.
http://www.megaupload.com/?d=6FCT36YH
Filesize: 27.96 MB
Filename: llbasha-WM5-AKU35pp16a1.rar
Description: llbasha Himalaya WM5-AKU35pp16a1
Good luck and enjoy.
LLBASHA
Note: You can refer to tjlabais original tutorial here:
http://buzzdev.net/index.php?option=com_phorum&Itemid=125&phorum_query=read,26,27196,page=1
-------------------------------------------------------------------------------------------------------------------------------
Edit1: Guys, please note I did not invent the wheel here!!! I only picked already existing work and put it into organized specific working method with example (my rom). So please no nag where did I get this or that from. What I am giving you here is next to perfect ROM that you CAN edit to suit your own taste.
Edit2: This method is NOT for new users - noob. It is NOT like the kitchen method. Also, question about the tools should be posted in the original thread by tjlabais.
Edit3: If you have problem download from MegaUpload, use this one: http://www.4shared.com/file/10238126/881bdc5f/llbasha-WM5-AKU35pp16a1.html?s=1
Edit4: Copy this file: \windows\iexplore.lnk to to here: \Windows\Start Menu\Programs\iexplore.lnk
Edit5: If you have slow startup or problem delete this file: \Windows\StartUp\psShutXP.lnk
Edit6: I got report of 500+ downlaods and 2000+ views bu no reports here on anything. Please file in your actual experence so others can benefit, regarding the ROM itself or the RomEditor tools. Thank you.
Edit7: Changing ramdisk size from registery only is not sufficient to pass the difference to program. New versions shall be released soon with different ramdisk size, but will keep 16mb pagepool.
Edit8: an new update rom version with 96mb program 16 ramdisk 16 pagepole
has been posted here:
http://forum.xda-developers.com/showthread.php?t=294016
New Version here
WM2005 AKU3.5 by LLBASHA
ROM: 3.50pp16A2
dated: 13.02.2007
OS 5.1.195 (Build 15698.3.5.0)
RamDisk 48mb
PagePool16mb
Storage 30.53mb
Program 64mb
For Himalaya PH10B (XDAii MDA2 Qtec2020 Imate Pocket PC)
This version is basically a simple update. Changes from version 3.50pp16a1
Removed SpeedDial and InternetCachiClean
Added cLaunch (great free today plugin)
Fixed startup delay caused by psShutXP
Fixed links and arranged icons in folders.
No known problem has been reported after intial version 450 downloads
Filesize: 28.0 MB (29,410,652 bytes)
Filename: llbasha-WM2005-AKU35pp16A2.rar
Description: llbasha Himalaya WM2005-AKU35pp16A2
Download links:
http://www.megaupload.com/?d=GVFL6OJD
http://www.4shared.com/file/10571804/ce7f3d8c/llbasha-WM2005-AKU35pp16A2.html
I have uploaded an alternative version, details of it you can find it here:
http://forum.xda-developers.com/showpost.php?p=1168356&postcount=79
It is not an upgrade to above but rather a special version custom made requested by some members.
Total download to date 3100+
Enjoy
llbasha
--------------------------------------------------------------------------------------------------------------------------------
llbasha - Latest WM5 using AKU3.5 - more screen shots
Here are some new screen shots
Engjoy
llbasha
THANX A lot
thanx for this rom. U have done a good job cause u had not puted any personal info and non removable applications.
CAN u tell me how can i change sms background as u did
Alternative download from here:
http://www.4shared.com/dir/1965106/cd5aba6f/sharing.html
I hope this works better.
llbasha
does it give also on German ?
Tahnks llbasha
While I'm dowenloading:
1) Do u mean that u include the cooking way in ur uploads?
I read the tutorial u mention and it was not clear for me (as the subject here 4 the Ramdisk and pagepool, by the way thanks 4 the explanation there)
I hope u can find time to make some easy explanation.
The_hesham said:
Tahnks llbasha
While I'm dowenloading:
1) Do u mean that u include the cooking way in ur uploads?
Click to expand...
Click to collapse
Yes, I did put all the cooking tools and steps to take to modify ANY rom to your liking.
llbasha
Question started
Dear llbasha
Please explain more:
In the text file "llbasha-WM5-AKU35pp16a1.txt
5. If you want to change the image/rom version (show on first splash screen bottom right corner), Go to address: 19, 82CDF, 1C1C18
search for old version and replace it with exact number of digits.
6. If you want to change the rom version and date that show when accessing device information from settings, search for the version in unicode, and the date stamp in ANSI.
7- Save your file and run 6ReassembleNPF.bat
[Correction is 7ReassembleNPF.bat]
And
In step no. 2
"When done, remove all HIDDEN attributes for ALL files.
Note: use Registery Workshop as editor for HKLM & HKCU even if nothing changed (not all rom modifications would require registery editing), i.e. open the file and save again irrespective)."
Please explain?
The_hesham said:
Dear llbasha
Please explain more:
In the text file "llbasha-WM5-AKU35pp16a1.txt
5. If you want to change the image/rom version (show on first splash screen bottom right corner), Go to address: 19, 82CDF, 1C1C18
search for old version and replace it with exact number of digits.
llbasha: Open the nk.nba with hex editor... search for the older version you want to change. In my case, I find it at the above addresses. This process change only the image version that you see on first splash screen... ok
6. If you want to change the rom version and date that show when accessing device information from settings, search for the version in unicode, and the date stamp in ANSI.
llbasha: The same version shows also when you start you device, go to settings, device info. To change this, again open nk.npa with hex editor and search for it but in this case search using unicode. To change the date of the version, search for the old version date in ANSI and when you find it change it... OK
7- Save your file and run 6ReassembleNPF.bat
[Correction is 7ReassembleNPF.bat]
llbasha: There is no 6........bat anyway. Thanks
And
In step no. 2
"When done, remove all HIDDEN attributes for ALL files.
llbasha: I suspected that some hidden files may not be picked up by the compiler, so I removed all hiden attributes ...
Note: use Registery Workshop as editor for HKLM & HKCU even if nothing changed (not all rom modifications would require registery editing), i.e. open the file and save again irrespective)."
llbasha: What do you want me to explain? ... please rephrase..
Please explain?
Click to expand...
Click to collapse
I hope this helps
Some Apps like Schekar rom...
Hi,
Is this screeshots from your new ROM?
I think there is some apps like Schekar ROM presente in this new rom.
I've returned to Helmi's rom, just because is almost 100% clean.
Thanks anyway for your work.
zipzop said:
does it give also on German ?
Click to expand...
Click to collapse
Sorry ... This is English ROM but sure there is someone out there who knows how to localize it.
Regards
llbash
superxx said:
Hi,
Is this screeshots from your new ROM?
I think there is some apps like Schekar ROM presente in this new rom.
I've returned to Helmi's rom, just because is almost 100% clean.
Thanks anyway for your work.
Click to expand...
Click to collapse
Yes, above screen shoots are from my rom on my O2XDAii and no one else.
This is clean ROM ... what are you taking about??? Please be specific... What is 100% clean???????????
There was some remaining space in the rom so I filled it with some VERY small today plugin and utilities and are disabled by default. So where is the problem. This remaing space you can't use it anyway once you cocked the rom.
Any I included the tools and steps to remove/add to your liking... So....
Hello Sir,
I will try to use this rom frist.Thank you to much.
sorry
Hello Sir,
After I use it .Almost OK but my Internet exploer icon lost .How I get it back ?
krishan2207 said:
HI
i found a bug.Whenever i tried to open download agent it opens with a blank screen nothing to do in that application so check it out.
Click to expand...
Click to collapse
Where did you get that??????????????
Are you talking about my ROM??????????????
Question started ....contenue
llbasha said:
I hope this helps
Click to expand...
Click to collapse
Dear llbasha
The_hesham: regarding no.5
I search for 19, 82CDF, 1C1C18 as shown ,
Then what to do?
Regarding no.6
6. If you want to change the rom version and date that show when accessing device information from settings, search for the version in unicode, and the date stamp in ANSI.
llbasha: The same version shows also when you start you device, go to settings, device info. To change this, again open nk.npa with hex editor and search for it but in this case search using unicode. To change the date of the version, search for the old version date in ANSI and when you find it change it... OK
The_hesham: Search for what see photo no4 & How to change?
Regarding step no.2
llbasha: I suspected that some hidden files may not be picked up by the compiler, so I removed all hiden attributes
The_hesham: Do u mean to delet all hidden files & which files I suspect it will not be picked by the compiler?
Regarding :
Note: use Registery Workshop as editor for HKLM & HKCU even if nothing changed (not all rom modifications would require registery editing), i.e. open the file and save again irrespective)."
The_hesham: Which workshop as editor & which file to edit?
I'm sorry for to much questions but I did cooking by bepe tools and I want to know about this way.
sorrawut said:
Hello Sir,
After I use it .Almost OK but my Internet exploer icon lost .How I get it back ?
Click to expand...
Click to collapse
Copy this file: \windows\iexplore.lnk
to here: \Windows\Start Menu\Programs\iexplore.lnk
Thanks
llbasha said:
Copy this file: \windows\iexplore.lnk
to here: \Windows\Start Menu\Programs\iexplore.lnk
Thanks
Click to expand...
Click to collapse
Thank Sir,
krishan2207 said:
thanx for this rom. U have done a good job cause u had not puted any personal info and non removable applications.
CAN u tell me how can i change sms background as u did
Click to expand...
Click to collapse
Do you know about HTML, STYLEs, and JAVA scripting???????????
If you do then you want be asking this question, and if you do not know then my answer to you is I do not either!!!!!!!!!!!
You need an expert from Delhi to answer this. Do you know anyone??? May be you can ask him about your 'download agent bug' problem as well.
Thanks